diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index dc69bbe57a..e16e2d3be3 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -1,6 +1,6 @@ { "name": "Prusa", - "version": "02.04.00.07", + "version": "02.04.00.08", "force_update": "0", "description": "Prusa configurations", "machine_model_list": [ @@ -20,6 +20,10 @@ "name": "Prusa CORE One L HF", "sub_path": "machine/Prusa CORE One L HF.json" }, + { + "name": "Prusa CORE One MMU3", + "sub_path": "machine/Prusa CORE One MMU3.json" + }, { "name": "Prusa MINI", "sub_path": "machine/Prusa MINI.json" @@ -702,6 +706,26 @@ "name": "0.25mm Speed @MINIIS", "sub_path": "process/0.25mm Speed @MINIIS.json" }, + { + "name": "0.15mm BALANCED @COREONE0.4 + MMU3", + "sub_path": "process/0.15mm BALANCED @COREONE0.4 + MMU3.json" + }, + { + "name": "0.20mm BALANCED @COREONE0.4 + MMU3", + "sub_path": "process/0.20mm BALANCED @COREONE0.4 + MMU3.json" + }, + { + "name": "0.25mm BALANCED @COREONE0.4 + MMU3", + "sub_path": "process/0.25mm BALANCED @COREONE0.4 + MMU3.json" + }, + { + "name": "0.25mm SPEED @COREONE0.4 + MMU3", + "sub_path": "process/0.25mm SPEED @COREONE0.4 + MMU3.json" + }, + { + "name": "0.25mm STRUCTURAL @COREONE0.4 + MMU3", + "sub_path": "process/0.25mm STRUCTURAL @COREONE0.4 + MMU3.json" + }, { "name": "0.05mm DETAIL @MK4S 0.25", "sub_path": "process/0.05mm DETAIL @MK4S 0.25.json" @@ -1114,6 +1138,14 @@ "name": "0.05mm DETAIL @CORE One L 0.25", "sub_path": "process/0.05mm DETAIL @CORE One L 0.25.json" }, + { + "name": "0.07mm DETAIL @COREONE0.25 + MMU3", + "sub_path": "process/0.07mm DETAIL @COREONE0.25 + MMU3.json" + }, + { + "name": "0.12mm SPEED @COREONE0.25 + MMU3", + "sub_path": "process/0.12mm SPEED @COREONE0.25 + MMU3.json" + }, { "name": "0.12mm STRUCTURAL @CORE One 0.25", "sub_path": "process/0.12mm STRUCTURAL @CORE One 0.25.json" @@ -1134,6 +1166,10 @@ "name": "0.15mm STRUCTURAL @MK4S 0.25", "sub_path": "process/0.15mm STRUCTURAL @MK4S 0.25.json" }, + { + "name": "0.12mm STRUCTURAL @COREONE0.3 + MMU3", + "sub_path": "process/0.12mm STRUCTURAL @COREONE0.3 + MMU3.json" + }, { "name": "0.16mm SPEED @MK4S 0.3", "sub_path": "process/0.16mm SPEED @MK4S 0.3.json" @@ -1158,6 +1194,10 @@ "name": "0.10mm FAST DETAIL @CORE One L 0.4", "sub_path": "process/0.10mm FAST DETAIL @CORE One L 0.4.json" }, + { + "name": "0.15mm SPEED @COREONE0.4 + MMU3", + "sub_path": "process/0.15mm SPEED @COREONE0.4 + MMU3.json" + }, { "name": "0.15mm SPEED @CORE One HF 0.4", "sub_path": "process/0.15mm SPEED @CORE One HF 0.4.json" @@ -1166,6 +1206,22 @@ "name": "0.15mm SPEED @CORE One L HF 0.4", "sub_path": "process/0.15mm SPEED @CORE One L HF 0.4.json" }, + { + "name": "0.15mm STRUCTURAL @COREONE0.6 + MMU3", + "sub_path": "process/0.15mm STRUCTURAL @COREONE0.6 + MMU3.json" + }, + { + "name": "0.20mm SOLUBLE FULL @COREONE0.4 + MMU3", + "sub_path": "process/0.20mm SOLUBLE FULL @COREONE0.4 + MMU3.json" + }, + { + "name": "0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3", + "sub_path": "process/0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3.json" + }, + { + "name": "0.20mm SPEED @COREONE0.4 + MMU3", + "sub_path": "process/0.20mm SPEED @COREONE0.4 + MMU3.json" + }, { "name": "0.20mm SPEED @CORE One HF 0.5", "sub_path": "process/0.20mm SPEED @CORE One HF 0.5.json" @@ -1198,6 +1254,10 @@ "name": "0.25mm SPEED @MK4S HF0.5", "sub_path": "process/0.25mm SPEED @MK4S HF0.5.json" }, + { + "name": "0.20mm SPEED @COREONE0.6 + MMU3", + "sub_path": "process/0.20mm SPEED @COREONE0.6 + MMU3.json" + }, { "name": "0.20mm SPEED @CORE One HF 0.6", "sub_path": "process/0.20mm SPEED @CORE One HF 0.6.json" @@ -1222,6 +1282,10 @@ "name": "0.15mm STRUCTURAL @CORE One L 0.4", "sub_path": "process/0.15mm STRUCTURAL @CORE One L 0.4.json" }, + { + "name": "0.20mm STRUCTURAL @COREONE0.4 + MMU3", + "sub_path": "process/0.20mm STRUCTURAL @COREONE0.4 + MMU3.json" + }, { "name": "0.25mm STRUCTURAL @CORE One HF 0.4", "sub_path": "process/0.25mm STRUCTURAL @CORE One HF 0.4.json" @@ -1230,6 +1294,10 @@ "name": "0.25mm STRUCTURAL @CORE One L HF 0.4", "sub_path": "process/0.25mm STRUCTURAL @CORE One L HF 0.4.json" }, + { + "name": "0.25mm SPEED @COREONE0.6 + MMU3", + "sub_path": "process/0.25mm SPEED @COREONE0.6 + MMU3.json" + }, { "name": "0.25mm SPEED @CORE One HF 0.6", "sub_path": "process/0.25mm SPEED @CORE One HF 0.6.json" @@ -1262,6 +1330,10 @@ "name": "0.30mm STRUCTURAL @CORE One L HF 0.8", "sub_path": "process/0.30mm STRUCTURAL @CORE One L HF 0.8.json" }, + { + "name": "0.32mm SPEED @COREONE0.6 + MMU3", + "sub_path": "process/0.32mm SPEED @COREONE0.6 + MMU3.json" + }, { "name": "0.32mm SPEED @CORE One HF 0.6", "sub_path": "process/0.32mm SPEED @CORE One HF 0.6.json" @@ -1318,6 +1390,18 @@ "name": "0.55mm SPEED @CORE One L HF 0.8", "sub_path": "process/0.55mm SPEED @CORE One L HF 0.8.json" }, + { + "name": "0.05mm DETAIL @COREONE0.25 + MMU3", + "sub_path": "process/0.05mm DETAIL @COREONE0.25 + MMU3.json" + }, + { + "name": "0.12mm STRUCTURAL @COREONE0.25 + MMU3", + "sub_path": "process/0.12mm STRUCTURAL @COREONE0.25 + MMU3.json" + }, + { + "name": "0.15mm SPEED @COREONE0.25 + MMU3", + "sub_path": "process/0.15mm SPEED @COREONE0.25 + MMU3.json" + }, { "name": "0.15mm STRUCTURAL @CORE One 0.25", "sub_path": "process/0.15mm STRUCTURAL @CORE One 0.25.json" @@ -1338,6 +1422,10 @@ "name": "0.20mm SPEED @MK4S 0.3", "sub_path": "process/0.20mm SPEED @MK4S 0.3.json" }, + { + "name": "0.16mm STRUCTURAL @COREONE0.3 + MMU3", + "sub_path": "process/0.16mm STRUCTURAL @COREONE0.3 + MMU3.json" + }, { "name": "0.20mm STRUCTURAL @CORE One 0.3", "sub_path": "process/0.20mm STRUCTURAL @CORE One 0.3.json" @@ -1346,6 +1434,10 @@ "name": "0.20mm STRUCTURAL @CORE One L 0.3", "sub_path": "process/0.20mm STRUCTURAL @CORE One L 0.3.json" }, + { + "name": "0.10mm FAST DETAIL @COREONE0.4 + MMU3", + "sub_path": "process/0.10mm FAST DETAIL @COREONE0.4 + MMU3.json" + }, { "name": "0.25mm STRUCTURAL @CORE One 0.5", "sub_path": "process/0.25mm STRUCTURAL @CORE One 0.5.json" @@ -1370,6 +1462,30 @@ "name": "0.32mm SPEED @MK4S HF0.5", "sub_path": "process/0.32mm SPEED @MK4S HF0.5.json" }, + { + "name": "0.20mm STRUCTURAL @COREONE0.6 + MMU3", + "sub_path": "process/0.20mm STRUCTURAL @COREONE0.6 + MMU3.json" + }, + { + "name": "0.15mm STRUCTURAL @COREONE0.4 + MMU3", + "sub_path": "process/0.15mm STRUCTURAL @COREONE0.4 + MMU3.json" + }, + { + "name": "0.25mm STRUCTURAL @COREONE0.6 + MMU3", + "sub_path": "process/0.25mm STRUCTURAL @COREONE0.6 + MMU3.json" + }, + { + "name": "0.32mm STRUCTURAL @COREONE0.6 + MMU3", + "sub_path": "process/0.32mm STRUCTURAL @COREONE0.6 + MMU3.json" + }, + { + "name": "0.15mm STRUCTURAL @COREONE0.25 + MMU3", + "sub_path": "process/0.15mm STRUCTURAL @COREONE0.25 + MMU3.json" + }, + { + "name": "0.16mm SPEED @COREONE0.3 + MMU3", + "sub_path": "process/0.16mm SPEED @COREONE0.3 + MMU3.json" + }, { "name": "0.20mm SPEED @CORE One 0.3", "sub_path": "process/0.20mm SPEED @CORE One 0.3.json" @@ -1378,6 +1494,10 @@ "name": "0.20mm SPEED @CORE One L 0.3", "sub_path": "process/0.20mm SPEED @CORE One L 0.3.json" }, + { + "name": "0.20mm STRUCTURAL @COREONE0.3 + MMU3", + "sub_path": "process/0.20mm STRUCTURAL @COREONE0.3 + MMU3.json" + }, { "name": "0.32mm STRUCTURAL @CORE One HF 0.5", "sub_path": "process/0.32mm STRUCTURAL @CORE One HF 0.5.json" @@ -1393,6 +1513,10 @@ { "name": "0.32mm SPEED @CORE One L HF 0.5", "sub_path": "process/0.32mm SPEED @CORE One L HF 0.5.json" + }, + { + "name": "0.20mm SPEED @COREONE0.3 + MMU3", + "sub_path": "process/0.20mm SPEED @COREONE0.3 + MMU3.json" } ], "filament_list": [ @@ -2032,6 +2156,10 @@ "name": "Generic ABS @Prusa CORE One HF 0.8", "sub_path": "filament/Generic ABS @Prusa CORE One HF 0.8.json" }, + { + "name": "Generic ABS @Prusa CORE One MMU3", + "sub_path": "filament/Generic ABS @Prusa CORE One MMU3.json" + }, { "name": "Generic ABS @Prusa MK4S 0.6", "sub_path": "filament/Generic ABS @Prusa MK4S 0.6.json" @@ -2112,6 +2240,10 @@ "name": "Generic ASA @Prusa CORE One HF 0.8", "sub_path": "filament/Generic ASA @Prusa CORE One HF 0.8.json" }, + { + "name": "Generic ASA @Prusa CORE One MMU3", + "sub_path": "filament/Generic ASA @Prusa CORE One MMU3.json" + }, { "name": "Generic ASA @Prusa MK4S 0.6", "sub_path": "filament/Generic ASA @Prusa MK4S 0.6.json" @@ -2160,6 +2292,10 @@ "name": "Prusament ASA @CORE One HF 0.8", "sub_path": "filament/Prusament ASA @CORE One HF 0.8.json" }, + { + "name": "Prusament ASA @CORE One MMU3", + "sub_path": "filament/Prusament ASA @CORE One MMU3.json" + }, { "name": "Prusament ASA @MK4S 0.6", "sub_path": "filament/Prusament ASA @MK4S 0.6.json" @@ -2192,6 +2328,10 @@ "name": "Generic TPU @Prusa CORE One 0.8", "sub_path": "filament/Generic TPU @Prusa CORE One 0.8.json" }, + { + "name": "Generic TPU @Prusa CORE One MMU3", + "sub_path": "filament/Generic TPU @Prusa CORE One MMU3.json" + }, { "name": "Generic PA @Prusa", "sub_path": "filament/Generic PA @Prusa.json" @@ -2240,6 +2380,10 @@ "name": "Prusament PA-CF @CORE One 0.8", "sub_path": "filament/Prusament PA-CF @CORE One 0.8.json" }, + { + "name": "Prusament PA-CF @CORE One MMU3", + "sub_path": "filament/Prusament PA-CF @CORE One MMU3.json" + }, { "name": "Prusament PA11 Carbon Fiber @MK4S 0.6", "sub_path": "filament/Prusament PA11 Carbon Fiber @MK4S 0.6.json" @@ -2300,6 +2444,10 @@ "name": "Prusament PC Blend @CORE One HF 0.8", "sub_path": "filament/Prusament PC Blend @CORE One HF 0.8.json" }, + { + "name": "Prusament PC Blend @CORE One MMU3", + "sub_path": "filament/Prusament PC Blend @CORE One MMU3.json" + }, { "name": "Prusament PC Blend @MK4S 0.6", "sub_path": "filament/Prusament PC Blend @MK4S 0.6.json" @@ -2332,6 +2480,10 @@ "name": "Prusament PC-CF @CORE One 0.8", "sub_path": "filament/Prusament PC-CF @CORE One 0.8.json" }, + { + "name": "Prusament PC-CF @CORE One MMU3", + "sub_path": "filament/Prusament PC-CF @CORE One MMU3.json" + }, { "name": "Prusament PC Blend Carbon Fiber @MK4S 0.6", "sub_path": "filament/Prusament PC Blend Carbon Fiber @MK4S 0.6.json" @@ -2380,6 +2532,10 @@ "name": "Generic PETG @Prusa CORE One HF 0.8", "sub_path": "filament/Generic PETG @Prusa CORE One HF 0.8.json" }, + { + "name": "Generic PETG @Prusa CORE One MMU3", + "sub_path": "filament/Generic PETG @Prusa CORE One MMU3.json" + }, { "name": "Generic PETG @Prusa MK4S 0.6", "sub_path": "filament/Generic PETG @Prusa MK4S 0.6.json" @@ -2460,6 +2616,10 @@ "name": "Prusament PETG @CORE One HF 0.8", "sub_path": "filament/Prusament PETG @CORE One HF 0.8.json" }, + { + "name": "Prusament PETG @CORE One MMU3", + "sub_path": "filament/Prusament PETG @CORE One MMU3.json" + }, { "name": "Prusament PETG @MK4S 0.6", "sub_path": "filament/Prusament PETG @MK4S 0.6.json" @@ -2516,6 +2676,10 @@ "name": "Generic PLA @Prusa CORE One HF 0.8", "sub_path": "filament/Generic PLA @Prusa CORE One HF 0.8.json" }, + { + "name": "Generic PLA @Prusa CORE One MMU3", + "sub_path": "filament/Generic PLA @Prusa CORE One MMU3.json" + }, { "name": "Generic PLA @Prusa MK4S 0.6", "sub_path": "filament/Generic PLA @Prusa MK4S 0.6.json" @@ -2584,6 +2748,10 @@ "name": "Generic PLA Silk @Prusa CORE One 0.8", "sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.8.json" }, + { + "name": "Generic PLA Silk @Prusa CORE One MMU3", + "sub_path": "filament/Generic PLA Silk @Prusa CORE One MMU3.json" + }, { "name": "Generic PLA-CF @Prusa", "sub_path": "filament/Generic PLA-CF @Prusa.json" @@ -2628,6 +2796,10 @@ "name": "Prusament PLA @CORE One HF 0.8", "sub_path": "filament/Prusament PLA @CORE One HF 0.8.json" }, + { + "name": "Prusament PLA @CORE One MMU3", + "sub_path": "filament/Prusament PLA @CORE One MMU3.json" + }, { "name": "Prusament PLA @MK4S 0.6", "sub_path": "filament/Prusament PLA @MK4S 0.6.json" @@ -2668,6 +2840,10 @@ "name": "Prusament rPLA @CORE One 0.8", "sub_path": "filament/Prusament rPLA @CORE One 0.8.json" }, + { + "name": "Prusament rPLA @CORE One MMU3", + "sub_path": "filament/Prusament rPLA @CORE One MMU3.json" + }, { "name": "Prusament rPLA @MK4S 0.6", "sub_path": "filament/Prusament rPLA @MK4S 0.6.json" @@ -2740,6 +2916,10 @@ "name": "Prusament PVB @CORE One 0.8", "sub_path": "filament/Prusament PVB @CORE One 0.8.json" }, + { + "name": "Prusament PVB @CORE One MMU3", + "sub_path": "filament/Prusament PVB @CORE One MMU3.json" + }, { "name": "Prusament PVB @MK4S 0.6", "sub_path": "filament/Prusament PVB @MK4S 0.6.json" @@ -3018,6 +3198,10 @@ "name": "fdm_machine_common_xl_5t", "sub_path": "machine/fdm_machine_common_xl_5t.json" }, + { + "name": "Prusa CORE One MMU3 0.4 nozzle", + "sub_path": "machine/Prusa CORE One MMU3 0.4 nozzle.json" + }, { "name": "Prusa CORE One 0.5 nozzle", "sub_path": "machine/Prusa CORE One 0.5 nozzle.json" @@ -3090,6 +3274,18 @@ "name": "Prusa XL 5T 0.8 nozzle", "sub_path": "machine/Prusa XL 5T 0.8 nozzle.json" }, + { + "name": "Prusa CORE One MMU3 0.25 nozzle", + "sub_path": "machine/Prusa CORE One MMU3 0.25 nozzle.json" + }, + { + "name": "Prusa CORE One MMU3 0.3 nozzle", + "sub_path": "machine/Prusa CORE One MMU3 0.3 nozzle.json" + }, + { + "name": "Prusa CORE One MMU3 0.6 nozzle", + "sub_path": "machine/Prusa CORE One MMU3 0.6 nozzle.json" + }, { "name": "Prusa MK4S HF0.5 nozzle", "sub_path": "machine/Prusa MK4S HF0.5 nozzle.json" diff --git a/resources/profiles/Prusa/Prusa CORE One MMU3_cover.png b/resources/profiles/Prusa/Prusa CORE One MMU3_cover.png new file mode 100644 index 0000000000..be841d654b Binary files /dev/null and b/resources/profiles/Prusa/Prusa CORE One MMU3_cover.png differ diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..b909758269 --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic ABS @Prusa CORE One MMU3", + "inherits": "Generic ABS @Prusa CORE One", + "from": "system", + "setting_id": "TM5fcvhbo1lgzsU6", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..4461d30750 --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic ASA @Prusa CORE One MMU3", + "inherits": "Generic ASA @Prusa CORE One", + "from": "system", + "setting_id": "0uAHoCupgHmVYVEx", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..c026e6d770 --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic PETG @Prusa CORE One MMU3", + "inherits": "Generic PETG @Prusa CORE One", + "from": "system", + "setting_id": "JutuB6ct5A1l2Biz", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..32498fb8a9 --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic PLA @Prusa CORE One MMU3", + "inherits": "Generic PLA @Prusa CORE One", + "from": "system", + "setting_id": "haNaA1KFlYeqtfIg", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.022{elsif nozzle_diameter[filament_extruder_id]==0.6}0.019{elsif nozzle_diameter[filament_extruder_id]==0.8}0.013{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "40" + ], + "filament_unloading_speed_start": [ + "30" + ], + "idle_temperature": [ + "170" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..d45bd3cd90 --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @Prusa CORE One MMU3", + "inherits": "Generic PLA Silk @Prusa CORE One", + "from": "system", + "setting_id": "MMarDGtK4f7u78gA", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.5}0.022{elsif nozzle_diameter[0]==0.6}0.018{elsif nozzle_diameter[0]==0.8}0.012{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.075{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "40" + ], + "filament_unloading_speed_start": [ + "30" + ], + "idle_temperature": [ + "170" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..7aa75a058f --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic TPU @Prusa CORE One MMU3", + "inherits": "Generic TPU @Prusa CORE One", + "from": "system", + "setting_id": "pYEUfg7uqu2LGw2n", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "idle_temperature": [ + "150" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament ASA @CORE One MMU3.json new file mode 100644 index 0000000000..6f415ba213 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament ASA @CORE One MMU3", + "inherits": "Prusament ASA @CORE One", + "from": "system", + "setting_id": "pESQ8XminojyIGyw", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PA-CF @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PA-CF @CORE One MMU3.json new file mode 100644 index 0000000000..cfdc1c5412 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA-CF @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PA-CF @CORE One MMU3", + "inherits": "Prusament PA-CF @CORE One", + "from": "system", + "setting_id": "DsvJLtFStnmOCm1m", + "filament_id": "OF54SvEe", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PC Blend @CORE One MMU3.json new file mode 100644 index 0000000000..ac1e31b8a5 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @CORE One MMU3", + "inherits": "Prusament PC Blend @CORE One", + "from": "system", + "setting_id": "VjMN8MwtU3BG5cA9", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "150" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PC-CF @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PC-CF @CORE One MMU3.json new file mode 100644 index 0000000000..fc73ddf3b4 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC-CF @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PC-CF @CORE One MMU3", + "inherits": "Prusament PC-CF @CORE One", + "from": "system", + "setting_id": "hTcuccoINAUJ4PfR", + "filament_id": "OFjz0a3m", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "150" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PETG @CORE One MMU3.json new file mode 100644 index 0000000000..70d19cc0d1 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PETG @CORE One MMU3", + "inherits": "Prusament PETG @CORE One", + "from": "system", + "setting_id": "ypQNV38FrfRu9QSd", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PLA @CORE One MMU3.json new file mode 100644 index 0000000000..df0112ed8f --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PLA @CORE One MMU3", + "inherits": "Prusament PLA @CORE One", + "from": "system", + "setting_id": "HSqoQhcjRqpny2g2", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "40" + ], + "filament_unloading_speed_start": [ + "30" + ], + "idle_temperature": [ + "170" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PVB @CORE One MMU3.json new file mode 100644 index 0000000000..992b9ebd58 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @CORE One MMU3.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "name": "Prusament PVB @CORE One MMU3", + "inherits": "Prusament PVB @CORE One", + "from": "system", + "setting_id": "IXUO4uCgUY1p5jIo", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "40" + ], + "filament_unloading_speed_start": [ + "30" + ], + "idle_temperature": [ + "170" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament rPLA @CORE One MMU3.json new file mode 100644 index 0000000000..282449b194 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament rPLA @CORE One MMU3", + "inherits": "Prusament rPLA @CORE One", + "from": "system", + "setting_id": "n0gSFPBaa7PQ1Y1x", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "40" + ], + "filament_unloading_speed_start": [ + "30" + ], + "idle_temperature": [ + "170" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.25 nozzle.json new file mode 100644 index 0000000000..2a862a9a73 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.25 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "machine", + "name": "Prusa CORE One MMU3 0.25 nozzle", + "inherits": "Prusa CORE One MMU3 0.4 nozzle", + "from": "system", + "setting_id": "8VtAsgGqtUUBmaxH", + "instantiation": "true", + "default_print_profile": "0.12mm SPEED @COREONE0.25 + MMU3", + "max_layer_height": "0.15", + "min_layer_height": "0.05", + "nozzle_diameter": [ + "0.25" + ], + "printer_model": "Prusa CORE One MMU3", + "printer_variant": "0.25", + "retraction_length": "0.8", + "z_hop": "0.15" +} diff --git a/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.3 nozzle.json b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.3 nozzle.json new file mode 100644 index 0000000000..3396a41a8d --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.3 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "machine", + "name": "Prusa CORE One MMU3 0.3 nozzle", + "inherits": "Prusa CORE One MMU3 0.4 nozzle", + "from": "system", + "setting_id": "EiPXZjRoFcw95gWA", + "instantiation": "true", + "default_print_profile": "0.16mm STRUCTURAL @COREONE0.3 + MMU3", + "max_layer_height": "0.22", + "min_layer_height": "0.05", + "nozzle_diameter": [ + "0.3" + ], + "printer_model": "Prusa CORE One MMU3", + "printer_variant": "0.3", + "retraction_length": "0.7", + "z_hop": "0.15" +} diff --git a/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.4 nozzle.json new file mode 100644 index 0000000000..83a6a95ca5 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.4 nozzle.json @@ -0,0 +1,40 @@ +{ + "type": "machine", + "name": "Prusa CORE One MMU3 0.4 nozzle", + "inherits": "Prusa CORE One 0.4 nozzle", + "from": "system", + "setting_id": "7NzvROXEkMpOMzJ5", + "instantiation": "true", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]", + "change_filament_gcode": "", + "cooling_tube_length": "20", + "cooling_tube_retraction": "45", + "default_filament_profile": "Prusament PLA @CORE One MMU3", + "default_print_profile": "0.20mm SPEED @COREONE0.4 + MMU3", + "extra_loading_move": "-52", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\n", + "machine_end_gcode": "{if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nM140 S0 ; turn off heatbed\nM141 S0 ; disable chamber control\nM107 ; turn off fan\nG1 X242 Y211 F10200 ; park\n{if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)} F720 ; Move bed down{endif}\nM702 ; unload the current filament\nM104 S0 ; turn off temperature\nG4 ; wait\nM572 S0 ; reset PA\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z]", + "machine_load_filament_time": "10.9", + "machine_max_speed_z": [ + "12", + "40" + ], + "machine_start_gcode": "M17 ; enable steppers\nM862.1 P[nozzle_diameter] A{(printer_notes=~/.*ABRASIVE_NOZZLE.*/ ? 1 : 0)} F{(printer_notes=~/.*HF_NOZZLE.*/ ? 1 : 0)} ; nozzle check\nM862.3 P \"COREONE\" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P \"Input shaper\" ; FW feature check\nM862.6 P \"MMU3\" ; FW feature check\nM115 U6.4.0+11974\n\n; setup MMU\nM708 A0x0b X5 ; extra load distance\nM708 A0x0d X140 ; unload feedrate\nM708 A0x11 X140 ; load feedrate\nM708 A0x14 X50 ; slow feedrate\nM708 A0x1e X12 ; Pulley current to ~200mA\nM708 A0x12 X90 ; selector feedrate mm/s\nM708 A0x13 X400 ; idler feedrate deg/s\nM708 A0x0f X400 ; selector acceleration mm/s2\n\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))} ; define print area\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\n{if chamber_temperature[initial_tool] > 35} \n; we need to preheat the chamber\nM140 S115 ; set bed temp for chamber heating\n{else} \n; just set the selected bed temp otherwise\nM140 S[first_layer_bed_temperature] ; set bed temp\n{endif}\nM109 R{((filament_notes[initial_tool]=~/.*HT_MBL10.*/) ? (first_layer_temperature[initial_tool] - 10) : (filament_type[initial_tool] == \"PC\" or filament_type[initial_tool] == \"PA\") ? (first_layer_temperature[initial_tool] - 25) : (filament_type[initial_tool] == \"FLEX\") ? 210 : (filament_type[initial_tool]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n\nM84 E ; turn off E motor\n\nG28 ; home all without mesh bed level\n\n; -- Chamber Temperature Control --\n{if chamber_temperature[initial_tool] > 35} ; if we need to heat the chamber\n; min chamber temp section\nM104 T{initial_tool} S{if idle_temperature[initial_tool] == 0}100{else}{idle_temperature[initial_tool]}{endif} ; set idle temp\nG1 Z10 F720 ; set bed position\nG1 X242 Y-9 F4800 ; set print head position\nM191 S{chamber_temperature[initial_tool]} ; wait for minimal chamber temp\nM141 S0 ; set nominal chamber temp\nM107\nM140 S[first_layer_bed_temperature] ; set bed temp\n\n{else}\nM141 S{if chamber_temperature[initial_tool] == 0}20{else}{chamber_temperature[initial_tool]}{endif} ; set nominal chamber temp\n{endif}\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S70{endif}\nG0 Z40 F10000\nM104 T{initial_tool} S{if idle_temperature[initial_tool] == 0}100{else}{idle_temperature[initial_tool]}{endif}\nM190 R[first_layer_bed_temperature] ; wait for bed temp\nM107\n\nG29 G ; absorb heat\n\nM109 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : 170)} ; wait for MBL temp\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]==\"FLEX\"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\n; --- Mesh Bed Leveling (MBL) ---\n\nG29 P9 X208 Y-2.5 W32 H4 ; limited MBL\nM84 E ; turn off E motor\n\nG29 P1 ; invalidate MBL and probe print area\nG29 P1 X150 Y0 W100 H20 C ; probe near purge area\nG29 P3.2 ; MBL interpolation\nG29 P3.13 ; MBL extrapolation outside probe area\nG29 A ; activate MBL\n\n; prepare for purge\nM104 S{first_layer_temperature[initial_tool]}\nG0 X249 Y-2.5 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[initial_tool]}\n\nG92 E0\nM569 S0 E ; set spreadcycle mode for extruder\n\nM591 S0 ; disable stuck detection\n\nT[initial_tool]\nG1 E{parking_pos_retraction + extra_loading_move - 15} F1000 ; load to the nozzle\n\n;\n; Extrude purge line\n;\nG92 E0 ; reset extruder position\nG1 E{(filament_type[initial_tool] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E5 X235 Z0.2 F500 ; purge\nG0 X145 E36 F500 ; purge\nG0 X135 E4 F500 ; purge\nG0 X125 E4 F650 ; purge\nG0 X122 Z0.05 F8000 ; wipe, move close to the bed\nG0 X119 Z0.2 F8000 ; wipe, move quickly away from the bed\n\nM591 R ; restore stuck detection\n\nG92 E0\nM221 S100 ; set flow to 100%", + "machine_unload_filament_time": "8.9", + "nozzle_diameter": [ + "0.4" + ], + "nozzle_height": "4", + "parking_pos_retraction": "84", + "printer_extruder_id": [ + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard" + ], + "printer_model": "Prusa CORE One MMU3", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONEMMU3\nPRINTER_MODEL_MK4\nCOREMMU\nRAMMING_EXTRA\nPG\nNO_TEMPLATES\nThe MK4 marker enables WipeTower2 cold ramming and filament monitoring control for the CORE One MMU3.", + "printer_variant": "0.4", + "single_extruder_multi_material": "1", + "wipe_tower_type": "type2" +} diff --git a/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.6 nozzle.json b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.6 nozzle.json new file mode 100644 index 0000000000..11de2e2eac --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.6 nozzle.json @@ -0,0 +1,19 @@ +{ + "type": "machine", + "name": "Prusa CORE One MMU3 0.6 nozzle", + "inherits": "Prusa CORE One MMU3 0.4 nozzle", + "from": "system", + "setting_id": "rFDxiYXLDZVYHqe8", + "instantiation": "true", + "default_filament_profile": "Prusament PLA @CORE One MMU3", + "default_print_profile": "0.20mm SPEED @COREONE0.6 + MMU3", + "max_layer_height": "0.40", + "min_layer_height": "0.15", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Prusa CORE One MMU3", + "printer_variant": "0.6", + "retraction_length": "0.7", + "wipe": "0" +} diff --git a/resources/profiles/Prusa/machine/Prusa CORE One MMU3.json b/resources/profiles/Prusa/machine/Prusa CORE One MMU3.json new file mode 100644 index 0000000000..a0e766e818 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa CORE One MMU3.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Prusa CORE One MMU3", + "bed_model": "coreone_bed.stl", + "bed_texture": "coreone.svg", + "default_materials": "Generic ABS @Prusa CORE One MMU3;Generic ASA @Prusa CORE One MMU3;Generic PETG @Prusa CORE One MMU3;Generic PLA @Prusa CORE One MMU3;Generic PLA Silk @Prusa CORE One MMU3;Generic TPU @Prusa CORE One MMU3", + "family": "Prusa", + "hotend_model": "", + "machine_tech": "FFF", + "model_id": "Prusa_CORE_One_MMU3", + "nozzle_diameter": "0.25;0.3;0.4;0.6" +} diff --git a/resources/profiles/Prusa/process/0.05mm DETAIL @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.05mm DETAIL @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..123a51ea99 --- /dev/null +++ b/resources/profiles/Prusa/process/0.05mm DETAIL @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.05mm DETAIL @COREONE0.25 + MMU3", + "inherits": "0.05mm DETAIL @CORE One 0.25", + "from": "system", + "setting_id": "GZ9p7JXzPU3Widdg", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.07mm DETAIL @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.07mm DETAIL @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..97b0973c5c --- /dev/null +++ b/resources/profiles/Prusa/process/0.07mm DETAIL @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.07mm DETAIL @COREONE0.25 + MMU3", + "inherits": "0.07mm DETAIL @CORE One 0.25", + "from": "system", + "setting_id": "9ffM9tc7XMSNHnGB", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.10mm FAST DETAIL @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.10mm FAST DETAIL @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..2e7b0c7edb --- /dev/null +++ b/resources/profiles/Prusa/process/0.10mm FAST DETAIL @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.10mm FAST DETAIL @COREONE0.4 + MMU3", + "inherits": "0.10mm FAST DETAIL @CORE One 0.4", + "from": "system", + "setting_id": "5l28K1bE8lfuaXF1", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.12mm SPEED @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.12mm SPEED @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..e2d4ba94ca --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm SPEED @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.12mm SPEED @COREONE0.25 + MMU3", + "inherits": "0.12mm SPEED @CORE One 0.25", + "from": "system", + "setting_id": "YjbMEvZ8ALzK2qHf", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..551f6248f5 --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.12mm STRUCTURAL @COREONE0.25 + MMU3", + "inherits": "0.12mm STRUCTURAL @CORE One 0.25", + "from": "system", + "setting_id": "g8Bp93DCAwTo5G0s", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.3 + MMU3.json b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.3 + MMU3.json new file mode 100644 index 0000000000..25efb09730 --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.3 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.12mm STRUCTURAL @COREONE0.3 + MMU3", + "inherits": "0.12mm STRUCTURAL @CORE One 0.3", + "from": "system", + "setting_id": "XmhM0qI0mXLbBMwv", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.3 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.15mm BALANCED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.15mm BALANCED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..dd86f29945 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm BALANCED @COREONE0.4 + MMU3.json @@ -0,0 +1,70 @@ +{ + "type": "process", + "name": "0.15mm BALANCED @COREONE0.4 + MMU3", + "inherits": "0.20mm Standard @MK4", + "from": "system", + "setting_id": "gU24xfFrPejGfV1D", + "instantiation": "true", + "bridge_acceleration": "1500", + "brim_type": "no_brim", + "default_acceleration": "3000", + "elefant_foot_compensation": "0.2", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "raft_first_layer_expansion": "3", + "resolution": "0", + "seam_gap": "15%", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_interface_spacing": "0.2", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_interface_top_layers": "3", + "support_line_width": "0.4", + "support_speed": "120", + "top_surface_acceleration": "2000", + "top_surface_line_width": "0.42", + "travel_acceleration": "7000", + "travel_speed": "350", + "wall_loops": "2", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "bridge_speed": "45", + "bottom_shell_layers": "4", + "inner_wall_acceleration": "3000", + "inner_wall_speed": "150", + "internal_bridge_speed": "45", + "internal_solid_infill_acceleration": "6000", + "internal_solid_infill_speed": "150", + "layer_height": "0.15", + "outer_wall_acceleration": "2500", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "50", + "overhang_4_4_speed": "80%", + "small_perimeter_speed": "170", + "sparse_infill_acceleration": "5000", + "sparse_infill_speed": "150", + "support_bottom_z_distance": "0.17", + "support_interface_speed": "50", + "support_threshold_angle": "35", + "support_top_z_distance": "0.17", + "top_shell_layers": "6", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..287579505b --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.15mm SPEED @COREONE0.25 + MMU3", + "inherits": "0.15mm SPEED @CORE One 0.25", + "from": "system", + "setting_id": "mYSeGZQ0MykDNtXP", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..d9b2e4b903 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.15mm SPEED @COREONE0.4 + MMU3", + "inherits": "0.15mm SPEED @CORE One 0.4", + "from": "system", + "setting_id": "CdehEFlvnacxhU2H", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..b9082c332c --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.15mm STRUCTURAL @COREONE0.25 + MMU3", + "inherits": "0.15mm STRUCTURAL @CORE One 0.25", + "from": "system", + "setting_id": "sUWaBUUy033BXEzk", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..dd1e847ee3 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.15mm STRUCTURAL @COREONE0.4 + MMU3", + "inherits": "0.15mm STRUCTURAL @CORE One 0.4", + "from": "system", + "setting_id": "kM9rtB6iLqcDNZZU", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..6e7adf72c0 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.15mm STRUCTURAL @COREONE0.6 + MMU3", + "inherits": "0.15mm STRUCTURAL @CORE One 0.6", + "from": "system", + "setting_id": "PTOVGYLNah28dKRr", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.16mm SPEED @COREONE0.3 + MMU3.json b/resources/profiles/Prusa/process/0.16mm SPEED @COREONE0.3 + MMU3.json new file mode 100644 index 0000000000..30c6902ee7 --- /dev/null +++ b/resources/profiles/Prusa/process/0.16mm SPEED @COREONE0.3 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.16mm SPEED @COREONE0.3 + MMU3", + "inherits": "0.16mm SPEED @CORE One 0.3", + "from": "system", + "setting_id": "ByXT7JeCV0SWiSnt", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.3 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.16mm STRUCTURAL @COREONE0.3 + MMU3.json b/resources/profiles/Prusa/process/0.16mm STRUCTURAL @COREONE0.3 + MMU3.json new file mode 100644 index 0000000000..946d22c3a5 --- /dev/null +++ b/resources/profiles/Prusa/process/0.16mm STRUCTURAL @COREONE0.3 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.16mm STRUCTURAL @COREONE0.3 + MMU3", + "inherits": "0.16mm STRUCTURAL @CORE One 0.3", + "from": "system", + "setting_id": "3XaKemYMM9AMLAIE", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.3 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.20mm BALANCED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.20mm BALANCED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..eba4b17a0e --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm BALANCED @COREONE0.4 + MMU3.json @@ -0,0 +1,66 @@ +{ + "type": "process", + "name": "0.20mm BALANCED @COREONE0.4 + MMU3", + "inherits": "0.20mm Standard @MK4", + "from": "system", + "setting_id": "ZhSjwXMEOWyeWIDd", + "instantiation": "true", + "bridge_acceleration": "1500", + "brim_type": "no_brim", + "default_acceleration": "3000", + "elefant_foot_compensation": "0.2", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "raft_first_layer_expansion": "3", + "resolution": "0", + "seam_gap": "15%", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_interface_spacing": "0.2", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_interface_top_layers": "3", + "support_line_width": "0.4", + "support_speed": "120", + "top_surface_acceleration": "2000", + "top_surface_line_width": "0.42", + "travel_acceleration": "7000", + "travel_speed": "350", + "wall_loops": "2", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "bridge_speed": "50", + "inner_wall_acceleration": "3000", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "6000", + "internal_solid_infill_speed": "150", + "outer_wall_acceleration": "2500", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "50", + "overhang_4_4_speed": "80%", + "small_perimeter_speed": "170", + "sparse_infill_acceleration": "5000", + "sparse_infill_speed": "150", + "support_interface_speed": "60", + "support_style": "snug", + "support_threshold_angle": "35", + "top_shell_layers": "5", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.20mm SOLUBLE FULL @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.20mm SOLUBLE FULL @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..88860432a2 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm SOLUBLE FULL @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm SOLUBLE FULL @COREONE0.4 + MMU3", + "inherits": "0.20mm SOLUBLE FULL @CORE One 0.4", + "from": "system", + "setting_id": "F4GvezeeqYGgETx5", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..c74ace1163 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3", + "inherits": "0.20mm SOLUBLE INTERFACE @CORE One 0.4", + "from": "system", + "setting_id": "hrh6ZS8cMrp6Fput", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.3 + MMU3.json b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.3 + MMU3.json new file mode 100644 index 0000000000..660170520b --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.3 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm SPEED @COREONE0.3 + MMU3", + "inherits": "0.20mm SPEED @CORE One 0.3", + "from": "system", + "setting_id": "a8MnMQB4PuzlCBkv", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.3 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..66ac63af73 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm SPEED @COREONE0.4 + MMU3", + "inherits": "0.20mm SPEED @CORE One 0.4", + "from": "system", + "setting_id": "gFegVTUTnp12IurN", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..fa6fcb0a90 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm SPEED @COREONE0.6 + MMU3", + "inherits": "0.20mm SPEED @CORE One 0.6", + "from": "system", + "setting_id": "b5DuLDBbPOrc3QUB", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.3 + MMU3.json b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.3 + MMU3.json new file mode 100644 index 0000000000..d1fe101fb0 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.3 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm STRUCTURAL @COREONE0.3 + MMU3", + "inherits": "0.20mm STRUCTURAL @CORE One 0.3", + "from": "system", + "setting_id": "3GXAe0t8hNMloSsA", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.3 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..cdb41c0ac6 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm STRUCTURAL @COREONE0.4 + MMU3", + "inherits": "0.20mm STRUCTURAL @CORE One 0.4", + "from": "system", + "setting_id": "elSJkPZlFi4sWveY", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..1a5cad323a --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm STRUCTURAL @COREONE0.6 + MMU3", + "inherits": "0.20mm STRUCTURAL @CORE One 0.6", + "from": "system", + "setting_id": "uvQ25wBWKEFdqMVl", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.25mm BALANCED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.25mm BALANCED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..4a3343351a --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm BALANCED @COREONE0.4 + MMU3.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "name": "0.25mm BALANCED @COREONE0.4 + MMU3", + "inherits": "0.20mm Standard @MK4", + "from": "system", + "setting_id": "cEccdq6KND9xa5HS", + "instantiation": "true", + "bridge_acceleration": "1500", + "brim_type": "no_brim", + "default_acceleration": "3000", + "elefant_foot_compensation": "0.2", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "raft_first_layer_expansion": "3", + "resolution": "0", + "seam_gap": "15%", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_interface_spacing": "0.2", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_interface_top_layers": "3", + "support_line_width": "0.4", + "support_speed": "120", + "top_surface_acceleration": "2000", + "top_surface_line_width": "0.42", + "travel_acceleration": "7000", + "travel_speed": "350", + "wall_loops": "2", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "bridge_speed": "50", + "inner_wall_acceleration": "3000", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_speed": "140", + "layer_height": "0.25", + "outer_wall_acceleration": "2500", + "overhang_2_4_speed": "15", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "70%", + "small_perimeter_speed": "150", + "sparse_infill_acceleration": "5000", + "sparse_infill_speed": "150", + "support_base_pattern": "rectilinear", + "support_bottom_z_distance": "0.25", + "support_style": "snug", + "support_threshold_angle": "35", + "support_top_z_distance": "0.25", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..869de56781 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.4 + MMU3.json @@ -0,0 +1,65 @@ +{ + "type": "process", + "name": "0.25mm SPEED @COREONE0.4 + MMU3", + "inherits": "0.20mm Standard @MK4", + "from": "system", + "setting_id": "oVLlJtwPINArAb0Y", + "instantiation": "true", + "bridge_acceleration": "1500", + "brim_type": "no_brim", + "default_acceleration": "3000", + "elefant_foot_compensation": "0.2", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "raft_first_layer_expansion": "3", + "resolution": "0", + "seam_gap": "15%", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_interface_spacing": "0.2", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_interface_top_layers": "3", + "support_line_width": "0.4", + "support_speed": "120", + "top_surface_acceleration": "2000", + "top_surface_line_width": "0.42", + "travel_acceleration": "7000", + "travel_speed": "350", + "wall_loops": "2", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "bridge_speed": "50", + "inner_wall_acceleration": "6000", + "internal_solid_infill_acceleration": "5000", + "layer_height": "0.25", + "overhang_2_4_speed": "15", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "70%", + "small_perimeter_speed": "170", + "sparse_infill_acceleration": "7000", + "support_base_pattern": "rectilinear", + "support_bottom_z_distance": "0.25", + "support_interface_speed": "60", + "support_style": "snug", + "support_threshold_angle": "35", + "support_top_z_distance": "0.25", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..ebfaa5bad5 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.25mm SPEED @COREONE0.6 + MMU3", + "inherits": "0.25mm SPEED @CORE One 0.6", + "from": "system", + "setting_id": "CRAV58WCDIn2bZdK", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..87aa0f0c52 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.4 + MMU3.json @@ -0,0 +1,72 @@ +{ + "type": "process", + "name": "0.25mm STRUCTURAL @COREONE0.4 + MMU3", + "inherits": "0.20mm Standard @MK4", + "from": "system", + "setting_id": "lBGry26X4a9IihAD", + "instantiation": "true", + "bridge_acceleration": "1500", + "brim_type": "no_brim", + "default_acceleration": "3000", + "elefant_foot_compensation": "0.2", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "raft_first_layer_expansion": "3", + "resolution": "0", + "seam_gap": "15%", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_interface_spacing": "0.2", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_interface_top_layers": "3", + "support_line_width": "0.4", + "support_speed": "120", + "top_surface_acceleration": "2000", + "top_surface_line_width": "0.42", + "travel_acceleration": "7000", + "travel_speed": "350", + "wall_loops": "2", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "bridge_speed": "50", + "gap_infill_speed": "60", + "inner_wall_acceleration": "2500", + "inner_wall_speed": "70", + "internal_solid_infill_acceleration": "4000", + "internal_solid_infill_speed": "140", + "layer_height": "0.25", + "outer_wall_acceleration": "1500", + "outer_wall_speed": "50", + "overhang_1_4_speed": "50%", + "overhang_2_4_speed": "15", + "overhang_3_4_speed": "45", + "overhang_4_4_speed": "90%", + "small_perimeter_speed": "50", + "sparse_infill_acceleration": "6000", + "sparse_infill_speed": "120", + "support_base_pattern": "rectilinear", + "support_bottom_z_distance": "0.25", + "support_style": "snug", + "support_threshold_angle": "40", + "support_top_z_distance": "0.25", + "top_surface_speed": "80", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..3ade06d990 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.25mm STRUCTURAL @COREONE0.6 + MMU3", + "inherits": "0.25mm STRUCTURAL @CORE One 0.6", + "from": "system", + "setting_id": "95m4AA4YRwcBt63r", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.32mm SPEED @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.32mm SPEED @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..1f39814702 --- /dev/null +++ b/resources/profiles/Prusa/process/0.32mm SPEED @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.32mm SPEED @COREONE0.6 + MMU3", + "inherits": "0.32mm SPEED @CORE One 0.6", + "from": "system", + "setting_id": "nqrmLvULVOKW9bSm", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.32mm STRUCTURAL @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.32mm STRUCTURAL @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..8d69f5c4bc --- /dev/null +++ b/resources/profiles/Prusa/process/0.32mm STRUCTURAL @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.32mm STRUCTURAL @COREONE0.6 + MMU3", + "inherits": "0.32mm STRUCTURAL @CORE One 0.6", + "from": "system", + "setting_id": "rYhCYIq1vvY40IYf", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +}