mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-20 14:08:20 +00:00
ENH: update gcode for X1E
jira:NONE Signed-off-by: xun.zhang <xun.zhang@bambulab.com> Change-Id: I161e9c65c24c3e35d2edb026aa9790ce02d9aff7 (cherry picked from commit 5bd2ad1806ed5b66631483734481449ab7965af6)
This commit is contained in:
xun.zhang authored and Noisyfox committed
1 parent
44ebac591c
commit
91349fa6cd
4 files changed
+4
-4
No files matched your search
@@ -33,5 +33,5 @@
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
],
|
||||
"machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X1Line truncated
|
||||
"machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20240305 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X1Line truncated
|
||||
}
|
||||
@@ -36,7 +36,7 @@
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
],
|
||||
"machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20240919 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124Line truncated
|
||||
"machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20250305 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ====\n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\Line truncated
|
||||
"machine_end_gcode": ";===== date: 20240402 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM141 S0 ; turn off chamber \nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n\n",
|
||||
"time_lapse_gcode": ";========Date 20250206========\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n",
|
||||
"change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E-[retraction_distance_when_cut] F200\nM400\n{endif}\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\nM400\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E{retraction_distance_when_cut - 2} F200\nG1 E2 F20\nM400\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]Line truncated
|
||||
|
||||
@@ -33,5 +33,5 @@
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
],
|
||||
"machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X1Line truncated
|
||||
"machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20240305 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X1Line truncated
|
||||
}
|
||||
@@ -33,5 +33,5 @@
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle"
|
||||
],
|
||||
"machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-Line truncated
|
||||
"machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20240305 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-Line truncated
|
||||
}
|
||||
Reference in new issue
Block a user