ENH:[filament/process]add high flow of X/P

Change-Id: Id4b1c9ee6c99cc4f95970ff94eac1f68f661ad86
jira:None
(cherry picked from commit ca9d5a226a07ecd5454046e6e45e52bf2ccb4936)

resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json

@@ -6,32 +6,164 @@
     "setting_id": "GP099",
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
+    "bridge_speed": [
+        "50",
+        "50"
+    ],
     "default_acceleration": [
+        "4000",
         "4000"
     ],
+    "enable_overhang_speed": [
+        "1",
+        "1"
+    ],
+    "enable_height_slowdown": [
+        "0",
+        "0"
+    ],
     "gap_infill_speed": [
+        "210",
         "210"
     ],
     "inner_wall_speed": [
+        "120",
         "120"
     ],
     "internal_solid_infill_speed": [
+        "150",
         "150"
     ],
+    "initial_layer_infill_speed": [
+        "105",
+        "105"
+    ],
+    "initial_layer_speed": [
+        "50",
+        "50"
+    ],
+    "initial_layer_acceleration": [
+        "500",
+        "500"
+    ],
+    "inner_wall_acceleration": [
+        "0",
+        "0"
+    ],
+    "initial_layer_travel_acceleration": [
+        "6000",
+        "6000"
+    ],
     "outer_wall_acceleration": [
+        "2000",
         "2000"
     ],
     "outer_wall_speed": [
+        "60",
         "60"
     ],
+    "overhang_1_4_speed": [
+        "60",
+        "60"
+    ],
+    "overhang_2_4_speed": [
+        "30",
+        "30"
+    ],
+    "overhang_3_4_speed": [
+        "10",
+        "10"
+    ],
+    "overhang_4_4_speed": [
+        "10",
+        "10"
+    ],
+    "overhang_totally_speed": [
+        "10",
+        "10"
+    ],
+    "print_extruder_id": [
+        "1",
+        "1"
+    ],
+    "print_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "sparse_infill_pattern": "gyroid",
     "sparse_infill_speed": [
+        "150",
         "150"
     ],
     "smooth_coefficient": "150",
-    "top_surface_speed": [
+    "slowdown_start_height": [
+        "0",
+        "0"
+    ],
+    "slowdown_start_speed": [
+        "1000",
+        "1000"
+    ],
+    "slowdown_start_acc": [
+        "100000",
+        "100000"
+    ],
+    "slowdown_end_height": [
+        "400",
+        "400"
+    ],
+    "slowdown_end_speed": [
+        "1000",
+        "1000"
+    ],
+    "slowdown_end_acc": [
+        "100000",
+        "100000"
+    ],
+    "small_perimeter_speed": [
+        "50%",
+        "50%"
+    ],
+    "small_perimeter_threshold": [
+        "0",
+        "0"
+    ],
+    "sparse_infill_acceleration": [
+        "100%",
+        "100%"
+    ],
+    "support_speed": [
+        "150",
         "150"
     ],
+    "support_interface_speed": [
+        "80",
+        "80"
+    ],
+    "top_surface_speed": [
+        "150",
+        "150"
+    ],
+    "top_surface_acceleration": [
+        "2000",
+        "2000"
+    ],
+    "travel_speed": [
+        "500",
+        "500"
+    ],
+    "travel_speed_z": [
+        "0",
+        "0"
+    ],
+    "travel_acceleration": [
+        "10000",
+        "10000"
+    ],
+    "vertical_shell_speed": [
+        "80%",
+        "80%"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",