[Profiles] Optimize profiles for BLOCKS RF50 printer (#10597)

* Update BLOCKS RF50 profiles

* Fix z_hop_types value attribution

* Fix: invalid z_hop_types parameter: slope

resources/profiles/Blocks/filament/Blocks Generic ABS.json

@@ -7,11 +7,65 @@
     "instantiation": "true",
     "inherits": "fdm_filament_abs",
     "filament_flow_ratio": [
-        "0.926"
+        "0.95"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_shrink": [
+        "99.5%"
     ],
     "filament_max_volumetric_speed": [
-        "20"
+        "18"
     ],
+    "nozzle_temperature_initial_layer": [
+        "255"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ], 
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "280"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "fan_min_speed": [
+        "10"
+    ], 
+    "fan_max_speed": [
+        "100"
+    ], 
+    "fan_cooling_layer_time": [
+        "30"
+    ], 
+    "slow_down_layer_time": ["10"], 
+    "close_fan_the_first_x_layers": ["4"], 
+    "slow_down_for_layer_cooling": ["1"],
+    "reduce_fan_stop_start_freq": ["1"],
+    "slow_down_min_speed": ["30"], 
+    "enable_overhang_bridge_fan": ["1"], 
+    "overhang_fan_threshold": ["25%"], 
+    "overhang_fan_speed": ["100%"], 
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+
     "compatible_printers": [
         "BLOCKS RD50 V2 0.4 nozzle",
         "BLOCKS RD50 V2 0.6 nozzle",

resources/profiles/Blocks/filament/Blocks Generic ASA-CF.json

@@ -0,0 +1,78 @@
+{
+    "type": "filament",
+    "filament_id": "BSFI010",
+    "setting_id": "BSSI010",
+    "name": "Blocks Generic ASA-CF",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_asa",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_shrink": [
+        "99.5%"
+    ],
+    "filament_max_volumetric_speed": [
+        "10"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ], 
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "280"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "95"
+    ],
+    "hot_plate_temp": [
+        "95"
+    ],
+    "fan_min_speed": [
+        "10"
+    ], 
+    "fan_max_speed": [
+        "45"
+    ], 
+    "fan_cooling_layer_time": [
+        "35"
+    ], 
+    "slow_down_layer_time": ["3"], 
+    "close_fan_the_first_x_layers": ["4"], 
+    "slow_down_for_layer_cooling": ["1"],
+    "reduce_fan_stop_start_freq": ["1"],
+    "slow_down_min_speed": ["10"], 
+    "enable_overhang_bridge_fan": ["1"], 
+    "overhang_fan_threshold": ["25%"], 
+    "overhang_fan_speed": ["50%"], 
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "80"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "compatible_printers": [
+        "BLOCKS RD50 V2 0.4 nozzle",
+        "BLOCKS RD50 V2 0.6 nozzle",
+        "BLOCKS RD50 V2 0.8 nozzle",
+        "BLOCKS RD50 V2",
+        "BLOCKS RF50 0.4 nozzle",
+        "BLOCKS RF50 0.6 nozzle",
+        "BLOCKS RF50 0.8 nozzle",
+        "BLOCKS RF50"
+    ]
+}

resources/profiles/Blocks/filament/Blocks Generic ASA.json

@@ -7,10 +7,63 @@
     "instantiation": "true",
     "inherits": "fdm_filament_asa",
     "filament_flow_ratio": [
-        "0.93"
+        "0.95"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_shrink": [
+        "99.5%"
     ],
     "filament_max_volumetric_speed": [
-        "20"
+        "18"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ], 
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "280"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "fan_min_speed": [
+        "10"
+    ], 
+    "fan_max_speed": [
+        "100"
+    ], 
+    "fan_cooling_layer_time": [
+        "30"
+    ], 
+    "slow_down_layer_time": ["10"], 
+    "close_fan_the_first_x_layers": ["4"], 
+    "slow_down_for_layer_cooling": ["1"],
+    "reduce_fan_stop_start_freq": ["1"],
+    "slow_down_min_speed": ["30"], 
+    "enable_overhang_bridge_fan": ["1"], 
+    "overhang_fan_threshold": ["25%"], 
+    "overhang_fan_speed": ["100%"], 
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
     ],
     "compatible_printers": [
         "BLOCKS RD50 V2 0.4 nozzle",

resources/profiles/Blocks/filament/Blocks Generic PA-CF.json

@@ -6,32 +6,35 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_filament_pa",
+    "filament_type": [
+       "PA-CF"
+    ],
     "filament_flow_ratio": [
         "0.95"
     ],
     "filament_max_volumetric_speed": [
         "10"
     ],
-    "filament_type": [
+    "nozzle_temperature_range_low": [
-       "PA-CF"
+        "240"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
     ],
     "nozzle_temperature_initial_layer": [
-       "275"
+       "255"
+    ],
+    "filament_density": [
+        "1.25"
     ],
     "nozzle_temperature": [
-       "270"
+       "250"
     ],
-    "slow_down_layer_time": [
+    "hot_plate_temp_initial_layer": [
-        "2"
+        "90"
     ],
-    "fan_min_speed": [
+    "hot_plate_temp": [
-        "0"
+        "90"
-    ],
-    "fan_cooling_layer_time": [
-        "4"
-    ],
-    "fan_max_speed": [
-        "60"
     ],
     "filament_retraction_length": [
       "1.2"
@@ -39,6 +42,36 @@
     "filament_z_hop": [
       "0.0"
     ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "4"
+    ],
+      
+    "close_fan_the_first_x_layers": ["3"], 
+    "slow_down_layer_time": ["2"], 
+    "slow_down_for_layer_cooling": ["1"],
+    "reduce_fan_stop_start_freq": ["0"],
+    "slow_down_min_speed": ["10"], 
+    "enable_overhang_bridge_fan": ["1"], 
+    "overhang_fan_threshold": ["95%"], 
+    "overhang_fan_speed": ["80%"], 
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "80"
+    ],
     "compatible_printers": [
         "BLOCKS RD50 V2 0.4 nozzle",
         "BLOCKS RD50 V2 0.6 nozzle",

resources/profiles/Blocks/filament/Blocks Generic PETG.json

@@ -7,11 +7,58 @@
     "instantiation": "true",
     "inherits": "fdm_filament_petg",
     "filament_flow_ratio": [
-        "0.95"
+        "0.94"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_shrink": [
+        "99.9%"
     ],
     "filament_max_volumetric_speed": [
-        "20"
+        "12"
     ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "nozzle_temperature": [
+        "245"
+    ], 
+    "nozzle_temperature_range_low": [
+        "210"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": ["1"], 
+    "slow_down_for_layer_cooling": ["1"],
+    "reduce_fan_stop_start_freq": ["1"],
+    "slow_down_min_speed": ["30"], 
+    "enable_overhang_bridge_fan": ["1"], 
+    "overhang_fan_threshold": ["25%"], 
+    "overhang_fan_speed": ["100%"], 
+    "additional_cooling_fan_speed": [
+        "40"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "80"
+    ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_min_speed": ["40"], 
+    "fan_cooling_layer_time": ["30"], 
+    "fan_max_speed": ["80"], 
+    "slow_down_layer_time": ["5"], 
     "compatible_printers": [
         "BLOCKS Pro S100 0.4 nozzle",
         "BLOCKS Pro S100 0.6 nozzle",

resources/profiles/Blocks/filament/Blocks Generic PLA.json

@@ -7,13 +7,35 @@
     "instantiation": "true",
     "inherits": "fdm_filament_pla",
     "filament_flow_ratio": [
-        "0.97"
+        "0.95"
     ],
     "filament_max_volumetric_speed": [
-        "20"
+        "18"
     ],
+    "nozzle_temperature_initial_layer": [
+        "210"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "slow_down_min_speed": ["30"],
     "additional_cooling_fan_speed": [
+        "100"
+    ],
+    "complete_print_exhaust_fan_speed": [
         "80"
+    ], 
+    "activate_air_filtration": [
+        "1"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
     ],
     "compatible_printers": [
         "BLOCKS Pro S100 0.4 nozzle",

resources/profiles/Blocks/filament/Blocks Generic TPU.json

@@ -6,11 +6,53 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_filament_tpu",
-    "filament_flow_ratio": [
-        "0.98"
-    ],
     "filament_max_volumetric_speed": [
-        "15"
+        "4"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_shrink": [
+        "99.5%"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ], 
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "nozzle_temperature_range_high": [
+        "280"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "fan_min_speed": [
+        "10"
+    ], 
+    "fan_max_speed": [
+        "100"
+    ], 
+    "additional_cooling_fan_speed": [
+        "60"
+    ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "80"
     ],
     "compatible_printers": [
         "BLOCKS Pro S100 0.4 nozzle",

resources/profiles/Blocks/machine/BLOCKS RF50 0.4 nozzle.json

@@ -23,36 +23,48 @@
         "0x500"
     ],
     "machine_max_acceleration_x": [
-      "30000",
+      "20000",
-      "30000"
+      "20000"
     ],
     "machine_max_acceleration_y": [
-      "30000",
+      "20000",
-      "30000"
+      "20000"
+    ],
+    "machine_max_acceleration_z": [
+      "200", 
+      "200"
     ],
     "machine_max_acceleration_extruding": [
-      "30000",
+      "20000",
-      "30000"
+      "20000"
     ],
+    "machine_max_speed_e": ["60"], 
+    "machine_max_speed_x": ["500"], 
+    "machine_max_speed_y": ["500"], 
+    "machine_max_speed_z": ["12"], 
     "retraction_length": [
-      "0.8"
+      "1"
     ],
     "retraction_speed": [
-      "30"
+      "60"
     ],
     "deretraction_speed": [
-      "80"
+      "30"
     ],
     "z_hop": [
-      "0.2"
+      "0.4"
     ],
-    "z_hop_types": "Auto Lift",
+    "z_hop_types": ["Slope Lift"],
     "auxiliary_fan": "1",
+    "support_air_filtration": "1", 
     "printable_height": "500",
     "extruder_clearance_radius": "106",
     "extruder_clearance_height_to_rod": "30",
     "extruder_clearance_height_to_lid": "185",
     "upward_compatible_machine": [
         "BLOCKS RF50"
-    ]
+    ], 
+    "wipe_distance": ["2"], 
+    "retract_before_wipe": ["0"]
+
 }

resources/profiles/Blocks/machine/BLOCKS RF50 0.6 nozzle.json

@@ -23,31 +23,40 @@
         "0x500"
     ],
     "machine_max_acceleration_x": [
-      "30000",
+      "20000",
-      "30000"
+      "20000"
     ],
     "machine_max_acceleration_y": [
-      "30000",
+      "20000",
-      "30000"
+      "20000"
+    ],
+    "machine_max_acceleration_z": [
+      "200", 
+      "200"
     ],
     "machine_max_acceleration_extruding": [
-      "30000",
+      "20000",
-      "30000"
+      "20000"
     ],
+    "machine_max_speed_e": ["60"], 
+    "machine_max_speed_x": ["500"], 
+    "machine_max_speed_y": ["500"], 
+    "machine_max_speed_z": ["12"], 
     "retraction_length": [
-      "0.8"
+      "1"
     ],
     "retraction_speed": [
-      "30"
+      "60"
     ],
     "deretraction_speed": [
-      "80"
+      "30"
     ],
     "z_hop": [
-      "0.2"
+      "0.4"
     ],
-    "z_hop_types": "Auto Lift",
+    "z_hop_types": ["Slope Lift"],
     "auxiliary_fan": "1",
+    "support_air_filtration": "1", 
     "printable_height": "500",
     "extruder_clearance_radius": "106",
     "extruder_clearance_height_to_rod": "30",
@@ -59,5 +68,8 @@
       "PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer]",
       "SET_PRESSURE_ADVANCE ADVANCE=0.046"
     ],
-    "printer_variant": "0.6"
+    "printer_variant": "0.6", 
+    "wipe_distance": ["2"], 
+    "retract_before_wipe": ["0"]
+
 }

resources/profiles/Blocks/machine/BLOCKS RF50 0.8 nozzle.json

@@ -23,31 +23,40 @@
         "0x500"
     ],
     "machine_max_acceleration_x": [
-      "30000",
+      "20000",
-      "30000"
+      "20000"
     ],
     "machine_max_acceleration_y": [
-      "30000",
+      "20000",
-      "30000"
+      "20000"
+    ],
+    "machine_max_acceleration_z": [
+      "200", 
+      "200"
     ],
     "machine_max_acceleration_extruding": [
-      "30000",
+      "20000",
-      "30000"
+      "20000"
     ],
+    "machine_max_speed_e": ["60"], 
+    "machine_max_speed_x": ["500"], 
+    "machine_max_speed_y": ["500"], 
+    "machine_max_speed_z": ["12"], 
     "retraction_length": [
-      "0.8"
+      "1"
     ],
     "retraction_speed": [
-      "30"
+      "60"
     ],
     "deretraction_speed": [
-      "80"
+      "30"
     ],
     "z_hop": [
-      "0.2"
+      "0.4"
     ],
-    "z_hop_types": "Auto Lift",
+    "z_hop_types": ["Slope Lift"],
     "auxiliary_fan": "1",
+    "support_air_filtration": "1", 
     "printable_height": "500",
     "extruder_clearance_radius": "106",
     "extruder_clearance_height_to_rod": "30",
@@ -55,5 +64,7 @@
     "upward_compatible_machine": [
         "BLOCKS RF50"
     ],
-    "printer_variant": "0.8"
+    "printer_variant": "0.8", 
+    "wipe_distance": ["2"], 
+    "retract_before_wipe": ["0"]
 }

resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json

@@ -13,26 +13,51 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.4 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "outer_wall_acceleration": "8000",
+    "enable_arc_fitting": "0", 
-    "inner_wall_acceleration": "15000",
+    "wall_generator": "classic", 
+    "top_solid_infill_flow_ratio":"0.97",
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "internal_bridge_speed": "100%",
-    "internal_solid_infill_acceleration": "100%",
+    "default_acceleration": "5000",
-    "initial_layer_acceleration": "1000",
+    "outer_wall_acceleration": "2500", 
-    "top_surface_acceleration": "15000",
+    "inner_wall_acceleration": "4500", 
-    "travel_acceleration": "30000"
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%", 
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
 }

resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json

@@ -13,26 +13,51 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.4 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "outer_wall_acceleration": "8000",
+    "enable_arc_fitting": "0", 
-    "inner_wall_acceleration": "15000",
+    "wall_generator": "classic", 
+    "top_solid_infill_flow_ratio":"0.97", 
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "internal_bridge_speed": "100%",
-    "internal_solid_infill_acceleration": "100%",
+    "default_acceleration": "5000",
-    "initial_layer_acceleration": "1000",
+    "outer_wall_acceleration": "2500", 
-    "top_surface_acceleration": "15000",
+    "inner_wall_acceleration": "4500", 
-    "travel_acceleration": "30000"
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%", 
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
 }

resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json

@@ -13,26 +13,51 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.6 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "outer_wall_acceleration": "8000",
+    "enable_arc_fitting": "0", 
-    "inner_wall_acceleration": "15000",
+    "wall_generator": "classic", 
+    "top_solid_infill_flow_ratio":"0.97", 
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "internal_bridge_speed": "100%",
-    "internal_solid_infill_acceleration": "100%",
+    "default_acceleration": "5000",
-    "initial_layer_acceleration": "1000",
+    "outer_wall_acceleration": "2500", 
-    "top_surface_acceleration": "15000",
+    "inner_wall_acceleration": "4500", 
-    "travel_acceleration": "30000"
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%", 
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
 }

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json

@@ -6,33 +6,62 @@
     "inherits": "fdm_process_blocks_common",
     "instantiation": "true",
     "layer_height": "0.20",
-    "initial_layer_print_height": "0.3",
+    "initial_layer_print_height": "0.2",
+    "line_width": "0.42", 
+    "initial_layer_line_width": "0.5", 
+    "outer_wall_line_width": "0.42", 
+    "inner_wall_line_width": "0.45", 
     "bottom_shell_layers": "4",
     "top_shell_layers": "5",
     "compatible_printers": [
         "BLOCKS RF50",
         "BLOCKS RF50 0.4 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "outer_wall_acceleration": "8000",
+    "enable_arc_fitting": "0", 
-    "inner_wall_acceleration": "15000",
+    "wall_generator": "classic", 
+    "top_solid_infill_flow_ratio":"0.97", 
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "internal_bridge_speed": "100%",
-    "internal_solid_infill_acceleration": "100%",
+    "default_acceleration": "5000",
-    "initial_layer_acceleration": "1000",
+    "outer_wall_acceleration": "2500", 
-    "top_surface_acceleration": "15000",
+    "inner_wall_acceleration": "4500", 
-    "travel_acceleration": "30000"
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%", 
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
 }

resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json

@@ -13,26 +13,51 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.4 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "outer_wall_acceleration": "8000",
+    "enable_arc_fitting": "0", 
-    "inner_wall_acceleration": "15000",
+    "wall_generator": "classic", 
+    "top_solid_infill_flow_ratio":"0.97", 
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "internal_bridge_speed": "100%",
-    "internal_solid_infill_acceleration": "100%",
+    "default_acceleration": "5000",
-    "initial_layer_acceleration": "1000",
+    "outer_wall_acceleration": "2500", 
-    "top_surface_acceleration": "15000",
+    "inner_wall_acceleration": "4500", 
-    "travel_acceleration": "30000"
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%",
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
 }

resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json

@@ -13,26 +13,51 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.6 nozzle"
     ],
-    "initial_layer_speed": "80",
+    "sparse_infill_speed": "300",    
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
-    "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "outer_wall_acceleration": "8000",
+    "enable_arc_fitting": "0", 
-    "inner_wall_acceleration": "15000",
+    "wall_generator": "classic", 
+    "top_solid_infill_flow_ratio":"0.97", 
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "internal_bridge_speed": "100%",
-    "internal_solid_infill_acceleration": "100%",
+    "default_acceleration": "5000",
-    "initial_layer_acceleration": "1000",
+    "outer_wall_acceleration": "2500", 
-    "top_surface_acceleration": "15000",
+    "inner_wall_acceleration": "4500", 
-    "travel_acceleration": "30000"
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%", 
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
 }

resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json

@@ -13,26 +13,51 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.4 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
-    "outer_wall_acceleration": "8000",
-    "inner_wall_acceleration": "15000",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "internal_solid_infill_acceleration": "100%",
+    "enable_arc_fitting": "0", 
-    "initial_layer_acceleration": "1000",
+    "wall_generator": "classic", 
-    "top_surface_acceleration": "15000",
+    "top_solid_infill_flow_ratio":"0.97", 
-    "travel_acceleration": "30000"
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
+    "internal_bridge_speed": "100%",
+    "default_acceleration": "5000",
+    "outer_wall_acceleration": "2500", 
+    "inner_wall_acceleration": "4500", 
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%", 
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
 }

resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json

@@ -13,26 +13,51 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.8 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "outer_wall_acceleration": "8000",
+    "enable_arc_fitting": "0", 
-    "inner_wall_acceleration": "15000",
+    "wall_generator": "classic", 
+    "top_solid_infill_flow_ratio":"0.97", 
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "internal_bridge_speed": "100%",
-    "internal_solid_infill_acceleration": "100%",
+    "default_acceleration": "5000",
-    "initial_layer_acceleration": "1000",
+    "outer_wall_acceleration": "2500", 
-    "top_surface_acceleration": "15000",
+    "inner_wall_acceleration": "4500", 
-    "travel_acceleration": "30000"
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%",
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
 }

resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json

@@ -13,26 +13,52 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.6 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
-    "outer_wall_acceleration": "8000",
-    "inner_wall_acceleration": "15000",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "internal_solid_infill_acceleration": "100%",
+    "enable_arc_fitting": "0", 
-    "initial_layer_acceleration": "1000",
+    "wall_generator": "classic", 
-    "top_surface_acceleration": "15000",
+    "top_solid_infill_flow_ratio":"0.97", 
-    "travel_acceleration": "30000"
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
+    "internal_bridge_speed": "100%",
+    "default_acceleration": "5000",
+    "outer_wall_acceleration": "2500", 
+    "inner_wall_acceleration": "4500", 
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%", 
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
+
 }

resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json

@@ -13,26 +13,53 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.6 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "outer_wall_acceleration": "8000",
+    "enable_arc_fitting": "0", 
-    "inner_wall_acceleration": "15000",
+    "wall_generator": "classic", 
+    "top_solid_infill_flow_ratio":"0.97", 
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "internal_bridge_speed": "100%",
-    "internal_solid_infill_acceleration": "100%",
+    "default_acceleration": "5000",
-    "initial_layer_acceleration": "1000",
+    "outer_wall_acceleration": "2500", 
-    "top_surface_acceleration": "15000",
+    "inner_wall_acceleration": "4500", 
-    "travel_acceleration": "30000"
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%", 
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
+
+
 }

resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json

@@ -13,26 +13,52 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.8 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
-    "outer_wall_acceleration": "8000",
-    "inner_wall_acceleration": "15000",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "internal_solid_infill_acceleration": "100%",
+    "enable_arc_fitting": "0", 
-    "initial_layer_acceleration": "1000",
+    "wall_generator": "classic", 
-    "top_surface_acceleration": "15000",
+    "top_solid_infill_flow_ratio":"0.97",
-    "travel_acceleration": "30000"
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
+    "internal_bridge_speed": "100%",
+    "default_acceleration": "5000",
+    "outer_wall_acceleration": "2500", 
+    "inner_wall_acceleration": "4500", 
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%",
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
+
 }

resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json

@@ -13,26 +13,52 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.8 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
-    "outer_wall_acceleration": "8000",
-    "inner_wall_acceleration": "15000",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "internal_solid_infill_acceleration": "100%",
+    "enable_arc_fitting": "0", 
-    "initial_layer_acceleration": "1000",
+    "wall_generator": "classic", 
-    "top_surface_acceleration": "15000",
+    "top_solid_infill_flow_ratio":"0.97", 
-    "travel_acceleration": "30000"
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
+    "internal_bridge_speed": "100%",
+    "default_acceleration": "5000",
+    "outer_wall_acceleration": "2500", 
+    "inner_wall_acceleration": "4500", 
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%",
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
+
 }

resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json

@@ -13,26 +13,53 @@
         "BLOCKS RF50",
         "BLOCKS RF50 0.8 nozzle"
     ],
-    "initial_layer_speed": "80",
-    "initial_layer_infill_speed": "100",
-    "outer_wall_speed": "180",
-    "inner_wall_speed": "300",
-    "small_perimeter_speed": "50%",
-    "small_perimeter_threshold": "0",
     "sparse_infill_speed": "300",
-    "internal_solid_infill_speed": "300",
-    "top_surface_speed": "300",
-    "gap_infill_speed": "260",
-    "support_speed": "300",
     "support_interface_speed": "180",
     "travel_speed": "500",
-    "default_acceleration": "15000",
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
-    "outer_wall_acceleration": "8000",
+    "enable_arc_fitting": "0", 
-    "inner_wall_acceleration": "15000",
+    "wall_generator": "classic", 
+    "top_solid_infill_flow_ratio":"0.97", 
+    "bottom_solid_infill_flow_ratio": "1.08",
+    "seam_position": "aligned", 
+    "sparse_infill_patter": "grid", 
+    "initial_layer_speed": "60", 
+    "initial_layer_infill_speed": "80", 
+    "initial_travel_speed": "100%", 
+    "slow_layers_count": "5",
+    "slow_down_layers": "5", 
+    "outer_wall_speed": "180", 
+    "inner_wall_speed": "300", 
+    "small_perimeter_speed": "50%", 
+    "small_perimeter_threshold": "0", 
+    "internal_solid_infill_speed": "270", 
+    "top_surface_speed": "200", 
+    "gap_infill_speed": "260", 
+    "support_speed": "300", 
+    "detect_overhang_wall": "1",
+    "enable_overhang_speed": "1", 
+    "overhang_speed_classic": "0", 
+    "overhang_1_4_speed": "0", 
+    "overhang_2_4_speed": "50",  
+    "overhang_3_4_speed": "30", 
+    "overhang_4_4_speed": "10", 
+    "slowdown_for_curled_perimeters": "1",
+    "bridge_speed": "50%",
     "bridge_infill_acceleration": "50%",
-    "sparse_infill_acceleration": "100%",
+    "internal_bridge_speed": "100%",
-    "internal_solid_infill_acceleration": "100%",
+    "default_acceleration": "5000",
-    "initial_layer_acceleration": "1000",
+    "outer_wall_acceleration": "2500", 
-    "top_surface_acceleration": "15000",
+    "inner_wall_acceleration": "4500", 
-    "travel_acceleration": "30000"
+    "initial_layer_acceleration": "1500", 
+    "top_surface_acceleration": "2000", 
+    "internal_solid_infill_acceleration": "100%", 
+    "travel_acceleration": "20000", 
+    "sparse_infill_acceleration": "100%", 
+    "bridge_acceleration": "50%", 
+    "accel_to_decel_enable": "1", 
+    "accel_to_decel_factor": "50%", 
+    "elefant_foot_compensation": "0.25", 
+    "elefant_foot_compensation_layers": "1"
+
+
 }

resources/profiles/Blocks/process/fdm_process_blocks_common.json

@@ -31,7 +31,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_pattern": "grid",
     "initial_layer_acceleration": "3000",
     "initial_layer_line_width": "0.42",
     "initial_layer_print_height": "0.2",

resources/profiles/Blocks/process/fdm_process_common 0.6 nozzle.json

@@ -25,7 +25,7 @@
     "line_width": "0.62",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_pattern": "grid",
     "initial_layer_line_width": "0.62",
     "initial_layer_print_height": "0.2",
     "infill_combination": "0",
@@ -40,7 +40,7 @@
     "print_settings_id": "",
     "raft_layers": "0",
     "seam_position": "nearest",
-	"seam_gap": "2%",
+	  "seam_gap": "2%",
     "skirt_distance": "2",
     "skirt_height": "2",
     "minimum_sparse_infill_area": "0",

resources/profiles/Blocks/process/fdm_process_common.json

@@ -19,7 +19,7 @@
     "line_width": "0.45",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
+    "sparse_infill_pattern": "grid",
     "initial_layer_line_width": "0.42",
     "initial_layer_print_height": "0.2",
     "initial_layer_speed": "20",