ENH:add flat_irong as print preset

jira: none
Change-Id: Ic29634780e1ece2d0cffddd0c2cf7cafb1318fa2
(cherry picked from commit 2acd313f72d5e9531cf1394c218dc3bc6b8d9521)

resources/profiles/BBL/process/fdm_process_common.json

@@ -117,5 +117,6 @@
     "symmetric_infill_y_axis": "0",
     "prime_tower_lift_speed": "90",
     "prime_tower_lift_height": "-1",
-    "prime_tower_max_speed": "90"
+    "prime_tower_max_speed": "90",
+    "prime_tower_flat_ironing":"0"
 }

resources/profiles/BBL/process/fdm_process_dual_common.json

@@ -43,5 +43,7 @@
     "top_surface_acceleration": "2000",
     "top_surface_speed": "200",
     "travel_speed": "500",
-    "travel_speed_z": "0"
+    "travel_speed_z": "0",
+    "z_direction_outwall_speed_continuous": "1",
+    "prime_tower_flat_ironing":"1"
 }

src/libslic3r/GCode/WipeTower.cpp

@@ -16,7 +16,6 @@
 
 namespace Slic3r
 {
-bool                    flat_ironing                   = true; // Whether to enable flat ironing for the wipe tower
 static constexpr float  flat_iron_area                 = 4.f;
 constexpr float         flat_iron_speed                = 10.f * 60.f;
 static const double wipe_tower_wall_infill_overlap = 0.0;
@@ -1504,8 +1503,10 @@ WipeTower::WipeTower(const PrintConfig& config, int plate_idx, Vec3d plate_origi
     m_rib_width((float)config.prime_tower_rib_width.value),
     m_used_fillet(config.prime_tower_fillet_wall.value),
     m_extra_spacing((float)config.prime_tower_infill_gap.value/100.f),
-    m_tower_framework(config.prime_tower_enable_framework.value)
+    m_tower_framework(config.prime_tower_enable_framework.value),
+    m_flat_ironing(config.prime_tower_flat_ironing.value)
 {
+    m_flat_ironing = (m_flat_ironing && m_use_gap_wall);
     // Read absolute value of first layer speed, if given as percentage,
     // it is taken over following default. Speeds from config are not
     // easily accessible here.
@@ -1547,7 +1548,6 @@ WipeTower::WipeTower(const PrintConfig& config, int plate_idx, Vec3d plate_origi
     m_bed_bottom_left = m_bed_shape == RectangularBed
                   ? Vec2f(bed_points.front().x(), bed_points.front().y())
                   : Vec2f::Zero();
-    flat_ironing      = config.nozzle_diameter.values.size() > 1;//Only used for dual extrusion
 }
 
 
@@ -3397,7 +3397,7 @@ void WipeTower::toolchange_wipe_new(WipeTowerWriter &writer, const box_coordinat
                 writer.extrude(writer.x() + ironing_length, writer.y(), wipe_speed);
                 writer.retract(retract_length, retract_speed);
                 writer.travel(writer.x() - 1.5 * ironing_length, writer.y(), 600.);
-                if (flat_ironing) {
+                if (m_flat_ironing) {
                     writer.travel(writer.x() + 0.5f * ironing_length, writer.y(), 240.);
                     Vec2f pos{writer.x() + 1.f * ironing_length, writer.y()};
                     writer.spiral_flat_ironing(writer.pos(), flat_iron_area, m_perimeter_width, flat_iron_speed);
@@ -3412,7 +3412,7 @@ void WipeTower::toolchange_wipe_new(WipeTowerWriter &writer, const box_coordinat
                 writer.extrude(writer.x() - ironing_length, writer.y(), wipe_speed);
                 writer.retract(retract_length, retract_speed);
                 writer.travel(writer.x() + 1.5 * ironing_length, writer.y(), 600.);
-                if (flat_ironing) {
+                if (m_flat_ironing) {
                     writer.travel(writer.x() - 0.5f * ironing_length, writer.y(), 240.);
                     Vec2f pos{writer.x() - 1.0f * ironing_length, writer.y()};
                     writer.spiral_flat_ironing(writer.pos(), flat_iron_area, m_perimeter_width, flat_iron_speed);

src/libslic3r/GCode/WipeTower.hpp

@@ -488,7 +488,7 @@ private:
     std::vector<Vec2f> m_wall_skip_points;
     std::map<float,Polylines> m_outer_wall;
     bool is_first_layer() const { return size_t(m_layer_info - m_plan.begin()) == m_first_layer_idx; }
-
+    bool                       m_flat_ironing=false;
 	// Calculates length of extrusion line to extrude given volume
 	float volume_to_length(float volume, float line_width, float layer_height) const {
 		return std::max(0.f, volume / (layer_height * (line_width - layer_height * (1.f - float(M_PI) / 4.f))));

src/libslic3r/Preset.cpp

@@ -817,6 +817,7 @@ static std::vector<std::string> s_Preset_print_options {
     "elefant_foot_compensation", "elefant_foot_compensation_layers", "xy_contour_compensation", "xy_hole_compensation", "resolution", "enable_prime_tower", "prime_tower_enable_framework",
     "prime_tower_width", "prime_tower_brim_width", "prime_tower_skip_points",
     "prime_tower_rib_wall","prime_tower_extra_rib_length","prime_tower_rib_width","prime_tower_fillet_wall","prime_tower_infill_gap",
+    "prime_tower_flat_ironing",
     "wipe_tower_no_sparse_layers", "compatible_printers", "compatible_printers_condition", "inherits",
     "flush_into_infill", "flush_into_objects", "flush_into_support",
      "tree_support_branch_angle", "tree_support_angle_slow", "tree_support_wall_count", "tree_support_top_rate", "tree_support_branch_distance", "tree_support_tip_diameter",

src/libslic3r/Print.cpp

@@ -300,6 +300,7 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
             || opt_key == "prime_tower_width"
             || opt_key == "prime_tower_brim_width"
             || opt_key == "prime_tower_skip_points"
+            || opt_key == "prime_tower_flat_ironing"
             || opt_key == "prime_tower_rib_wall"
             || opt_key == "prime_tower_extra_rib_length"
             || opt_key == "prime_tower_rib_width"

src/libslic3r/PrintConfig.cpp

@@ -6092,6 +6092,10 @@ void PrintConfigDef::init_fff_params()
     def->mode    = comAdvanced;
     def->set_default_value(new ConfigOptionBool(true));
 
+    def      = this->add("prime_tower_flat_ironing", coBool);
+    def->mode = comAdvanced;
+    def->set_default_value(new ConfigOptionBool(false));
+
     def          = this->add("prime_tower_rib_wall", coBool);
     def->label   = L("Rib wall");
     def->tooltip = L("The wall of prime tower will add four ribs and make its "

src/libslic3r/PrintConfig.hpp

@@ -1464,6 +1464,7 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionFloat,              prime_tower_rib_width))
     ((ConfigOptionPercent,            prime_tower_infill_gap))
     ((ConfigOptionBool,               prime_tower_skip_points))
+    ((ConfigOptionBool,               prime_tower_flat_ironing))
     ((ConfigOptionBool,               prime_tower_rib_wall))
     ((ConfigOptionBool,               prime_tower_fillet_wall))
     ((ConfigOptionFloat,              wipe_tower_bridging))