juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-16 18:12:10 +00:00
Code Issues Packages Projects Releases Wiki Activity

FIX: backend get the extruder id based on filament_map

Browse Source 
Change-Id: Ib7679c0fc67336e462467dab9f5b4d4684d6eb19
(cherry picked from commit dcd9fd501354da33baea2adc0f645fabe8880cf1)
This commit is contained in:
zhimin.zeng
2024-07-02 19:26:52 +08:00
committed by Noisyfox
parent f5d2a1bc0c
commit 8db3e3cd54
20 changed files with 193 additions and 131 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
src/libslic3r/GCode/CoolingBuffer.cpp
View File

@@ -78,7 +78,7 @@ struct CoolingLine
length(0.f), feedrate(0.f), time(0.f), time_max(0.f), slowdown(false) {}
bool adjustable(bool slowdown_external_perimeters) const {
return (this->type & TYPE_ADJUSTABLE) &&
return (this->type & TYPE_ADJUSTABLE) &&
(! (this->type & TYPE_EXTERNAL_PERIMETER) || slowdown_external_perimeters) &&
this->time < this->time_max;
}
@@ -105,7 +105,7 @@ struct CoolingLine
};
// Calculate the required per extruder time stretches.
struct PerExtruderAdjustments
struct PerExtruderAdjustments
{
// Calculate the total elapsed time per this extruder, adjusted for the slowdown.
float elapsed_time_total() const {
@@ -114,7 +114,7 @@ struct PerExtruderAdjustments
time_total += line.time;
return time_total;
}
// Calculate the total elapsed time when slowing down
// Calculate the total elapsed time when slowing down
// to the minimum extrusion feed rate defined for the current material.
float maximum_time_after_slowdown(bool slowdown_external_perimeters) const {
float time_total = 0.f;
@@ -185,7 +185,7 @@ struct PerExtruderAdjustments
bool adj2 = l2.adjustable();
return (adj1 == adj2) ? l1.feedrate > l2.feedrate : adj1;
});
for (n_lines_adjustable = 0;
for (n_lines_adjustable = 0;
n_lines_adjustable < lines.size() && this->lines[n_lines_adjustable].adjustable();
++ n_lines_adjustable);
time_non_adjustable = 0.f;
@@ -242,7 +242,7 @@ struct PerExtruderAdjustments
// The following two values are set by sort_lines_by_decreasing_feedrate():
// Number of adjustable lines, at the start of lines.
size_t n_lines_adjustable = 0;
// Non-adjustable time of lines starting with n_lines_adjustable.
// Non-adjustable time of lines starting with n_lines_adjustable.
float time_non_adjustable = 0;
// Current total time for this extruder.
float time_total = 0;
@@ -257,7 +257,7 @@ struct PerExtruderAdjustments
// Calculate a new feedrate when slowing down by time_stretch for segments faster than min_feedrate.
// Used by non-proportional slow down.
float new_feedrate_to_reach_time_stretch(
std::vector<PerExtruderAdjustments*>::const_iterator it_begin, std::vector<PerExtruderAdjustments*>::const_iterator it_end,
std::vector<PerExtruderAdjustments*>::const_iterator it_begin, std::vector<PerExtruderAdjustments*>::const_iterator it_end,
float min_feedrate, float time_stretch, size_t max_iter = 20)
{
float new_feedrate = min_feedrate;
@@ -285,7 +285,7 @@ float new_feedrate_to_reach_time_stretch(
for (size_t i = 0; i < (*it)->n_lines_adjustable; ++i) {
const CoolingLine &line = (*it)->lines[i];
if (line.feedrate > min_feedrate && line.feedrate < new_feedrate)
// Some of the line segments taken into account in the calculation of nomin / denom are now slower than new_feedrate,
// Some of the line segments taken into account in the calculation of nomin / denom are now slower than new_feedrate,
// which makes the new_feedrate lower than it should be.
// Re-run the calculation with a new min_feedrate limit, so that the segments with current feedrate lower than new_feedrate
// are not taken into account.
@@ -361,7 +361,7 @@ std::vector<PerExtruderAdjustments> CoolingBuffer::parse_layer_gcode(const std::
// Time of any other movements before the first extrusion will be excluded from the layer time.
bool layer_had_extrusion = false;
for (; *line_start != 0; line_start = line_end)
for (; *line_start != 0; line_start = line_end)
{
while (*line_end != '\n' && *line_end != 0)
++ line_end;
@@ -574,7 +574,7 @@ static inline void extruder_range_slow_down_non_proportional(
}
assert(feedrate > 0.f);
// Sort by slow_down_min_speed, maximum speed first.
std::sort(by_min_print_speed.begin(), by_min_print_speed.end(),
std::sort(by_min_print_speed.begin(), by_min_print_speed.end(),
[](const PerExtruderAdjustments *p1, const PerExtruderAdjustments *p2){ return p1->slow_down_min_speed > p2->slow_down_min_speed; });
// Slow down, fast moves first.
for (;;) {
@@ -696,7 +696,7 @@ std::string CoolingBuffer::apply_layer_cooldown(
// Source G-code for the current layer.
const std::string &gcode,
// ID of the current layer, used to disable fan for the first n layers.
size_t layer_id,
size_t layer_id,
// Total time of this layer after slow down, used to control the fan.
float layer_time,
// Per extruder list of G-code lines and their cool down attributes.