mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 11:23:42 +00:00
Adding pellet printer suppor to OrcaSlicer (#4836)
* creating settings for printer and some UI changes work * related filament diameter and pellet flow changes to each other * UI name change to turn Filament to Material * updated the flow coefficient to filament diameter formula * updated the preset for the configuration wizard * configuration changes for the final release * config changes and preset bundle sync removed * start gcode change for ginger machines * added explanation of relationship between pellet_flow_coefficient and filament_diameter * Added tooltip. Fixed Ginger machine configuration, Added docs
This commit is contained in:
analysis230
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"enable_overhang_bridge_fan": ["0"],
|
||||
"fan_max_speed": ["0"],
|
||||
"fan_min_speed": ["0"],
|
||||
"filament_diameter": ["1.12838"],
|
||||
"filament_max_volumetric_speed": ["220"],
|
||||
"filament_settings_id": ["PETG"],
|
||||
"filament_type": ["PETG"],
|
||||
"filament_vendor": ["Generic"],
|
||||
"from": "system",
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["90"],
|
||||
"inherits": "fdm_filament_petg",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Ginger Generic PETG",
|
||||
"pellet_flow_coefficient": ["1"],
|
||||
"pressure_advance": ["0.01"],
|
||||
"slow_down_layer_time": ["30"],
|
||||
"slow_down_min_speed": ["1"],
|
||||
"version": "0.1.0.0",
|
||||
"compatible_printers": [
|
||||
"ginger G1 1.2 nozzle",
|
||||
"ginger G1 3.0 nozzle",
|
||||
"ginger G1 5.0 nozzle",
|
||||
"ginger G1 8.0 nozzle"
|
||||
],
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"fan_cooling_layer_time": ["60"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["20"],
|
||||
"filament_cost": ["6"],
|
||||
"filament_diameter": ["1.12838"],
|
||||
"filament_max_volumetric_speed": ["250"],
|
||||
"filament_settings_id": ["PLA"],
|
||||
"filament_vendor": ["Generic"],
|
||||
"from": "system",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Ginger Generic PLA",
|
||||
"nozzle_temperature": ["210"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"nozzle_temperature_range_high": ["220"],
|
||||
"pellet_flow_coefficient": ["1"],
|
||||
"required_nozzle_HRC": ["0"],
|
||||
"slow_down_layer_time": ["20"],
|
||||
"slow_down_min_speed": ["3"],
|
||||
"version": "0.1.0.0",
|
||||
"compatible_printers": [
|
||||
"ginger G1 1.2 nozzle",
|
||||
"ginger G1 3.0 nozzle",
|
||||
"ginger G1 5.0 nozzle",
|
||||
"ginger G1 8.0 nozzle"
|
||||
],
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,31 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"fan_cooling_layer_time": ["50"],
|
||||
"fan_min_speed": ["0"],
|
||||
"filament_density": ["1.27"],
|
||||
"filament_diameter": ["1.12838"],
|
||||
"filament_settings_id": ["rPETG"],
|
||||
"filament_type": ["rPETG"],
|
||||
"filament_vendor": ["Generic"],
|
||||
"from": "system",
|
||||
"hot_plate_temp": ["90"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "fdm_filament_rpetg",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Ginger Generic rPETG",
|
||||
"nozzle_temperature_range_high": ["260"],
|
||||
"nozzle_temperature_range_low": ["230"],
|
||||
"pellet_flow_coefficient": ["1"],
|
||||
"pressure_advance": ["0.01"],
|
||||
"required_nozzle_HRC": ["0"],
|
||||
"slow_down_min_speed": ["2"],
|
||||
"temperature_vitrification": ["85"],
|
||||
"version": "0.1.0.0",
|
||||
"compatible_printers": [
|
||||
"ginger G1 1.2 nozzle",
|
||||
"ginger G1 3.0 nozzle",
|
||||
"ginger G1 5.0 nozzle",
|
||||
"ginger G1 8.0 nozzle"
|
||||
],
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"fan_max_speed": ["0"],
|
||||
"fan_min_speed": ["0"],
|
||||
"filament_diameter": ["1.12838"],
|
||||
"filament_settings_id": ["rPLA"],
|
||||
"filament_type": ["rPLA"],
|
||||
"filament_vendor": ["Generic"],
|
||||
"from": "system",
|
||||
"inherits": "fdm_filament_rpla",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Ginger Generic rPLA",
|
||||
"pellet_flow_coefficient": ["1"],
|
||||
"version": "0.1.0.0",
|
||||
"compatible_printers": [
|
||||
"ginger G1 1.2 nozzle",
|
||||
"ginger G1 3.0 nozzle",
|
||||
"ginger G1 5.0 nozzle",
|
||||
"ginger G1 8.0 nozzle"
|
||||
],
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,95 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"activate_air_filtration": ["0"],
|
||||
"activate_chamber_temp_control": ["0"],
|
||||
"additional_cooling_fan_speed": ["70"],
|
||||
"chamber_temperature": ["0"],
|
||||
"close_fan_the_first_x_layers": ["1"],
|
||||
"compatible_printers": ["Ginger Additive ginger G1 1.0 nozzle"],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": ["70"],
|
||||
"cool_plate_temp": ["35"],
|
||||
"cool_plate_temp_initial_layer": ["35"],
|
||||
"default_filament_colour": [""],
|
||||
"during_print_exhaust_fan_speed": ["70"],
|
||||
"enable_overhang_bridge_fan": ["1"],
|
||||
"enable_pressure_advance": ["1"],
|
||||
"eng_plate_temp": ["0"],
|
||||
"eng_plate_temp_initial_layer": ["0"],
|
||||
"fan_cooling_layer_time": ["60"],
|
||||
"fan_max_speed": ["0"],
|
||||
"fan_min_speed": ["0"],
|
||||
"filament_cooling_final_speed": ["3.4"],
|
||||
"filament_cooling_initial_speed": ["2.2"],
|
||||
"filament_cooling_moves": ["4"],
|
||||
"filament_cost": ["5"],
|
||||
"filament_density": ["1.24"],
|
||||
"filament_deretraction_speed": ["nil"],
|
||||
"filament_diameter": ["2.8"],
|
||||
"filament_end_gcode": ["; filament end gcode \nM106 P3 S0\n"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_id": "P510eff9",
|
||||
"filament_is_support": ["0"],
|
||||
"filament_load_time": ["0"],
|
||||
"filament_loading_speed": ["28"],
|
||||
"filament_loading_speed_start": ["3"],
|
||||
"filament_max_volumetric_speed": ["300"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_multitool_ramming": ["0"],
|
||||
"filament_multitool_ramming_flow": ["10"],
|
||||
"filament_multitool_ramming_volume": ["10"],
|
||||
"filament_notes": [""],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": ["nil"],
|
||||
"filament_retract_lift_above": ["nil"],
|
||||
"filament_retract_lift_below": ["nil"],
|
||||
"filament_retract_lift_enforce": ["nil"],
|
||||
"filament_retract_restart_extra": ["nil"],
|
||||
"filament_retract_when_changing_layer": ["nil"],
|
||||
"filament_retraction_length": ["nil"],
|
||||
"filament_retraction_minimum_travel": ["nil"],
|
||||
"filament_retraction_speed": ["nil"],
|
||||
"filament_settings_id": ["Ginger Filaments Common"],
|
||||
"filament_shrink": ["100%"],
|
||||
"filament_soluble": ["0"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": ["0"],
|
||||
"filament_unload_time": ["0"],
|
||||
"filament_unloading_speed": ["90"],
|
||||
"filament_unloading_speed_start": ["100"],
|
||||
"filament_vendor": ["Generic"],
|
||||
"filament_wipe": ["nil"],
|
||||
"filament_wipe_distance": ["nil"],
|
||||
"filament_z_hop": ["nil"],
|
||||
"filament_z_hop_types": ["nil"],
|
||||
"from": "system",
|
||||
"full_fan_speed_layer": ["0"],
|
||||
"hot_plate_temp": ["1"],
|
||||
"hot_plate_temp_initial_layer": ["60"],
|
||||
"is_custom_defined": "0",
|
||||
"name": "fdm_filament_common",
|
||||
"nozzle_temperature": ["220"],
|
||||
"nozzle_temperature_initial_layer": ["220"],
|
||||
"nozzle_temperature_range_high": ["240"],
|
||||
"nozzle_temperature_range_low": ["190"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"overhang_fan_threshold": ["50%"],
|
||||
"pressure_advance": ["0.4"],
|
||||
"reduce_fan_stop_start_freq": ["0"],
|
||||
"required_nozzle_HRC": ["3"],
|
||||
"slow_down_for_layer_cooling": ["1"],
|
||||
"slow_down_layer_time": ["30"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["-1"],
|
||||
"temperature_vitrification": ["55"],
|
||||
"textured_plate_temp": ["55"],
|
||||
"textured_plate_temp_initial_layer": ["55"],
|
||||
"version": "1.7.0.2",
|
||||
"instantiation": "false"
|
||||
}
|
||||
@@ -0,0 +1,20 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_type": ["PETG"],
|
||||
"close_fan_the_first_x_layers": ["4"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"fan_max_speed": ["50"],
|
||||
"fan_min_speed": ["5"],
|
||||
"filament_diameter": ["2.4"],
|
||||
"filament_settings_id": ["PETG"],
|
||||
"filament_vendor": ["Generic"],
|
||||
"from": "system",
|
||||
"hot_plate_temp": ["50"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"inherits": "fdm_filament_common",
|
||||
"name": "fdm_filament_petg",
|
||||
"pressure_advance": ["0"],
|
||||
"slow_down_layer_time": ["25"],
|
||||
"version": "1.7.0.2",
|
||||
"instantiation": "false"
|
||||
}
|
||||
@@ -0,0 +1,20 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_type": ["PLA"],
|
||||
"close_fan_the_first_x_layers": ["4"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"fan_max_speed": ["50"],
|
||||
"fan_min_speed": ["5"],
|
||||
"filament_diameter": ["2.4"],
|
||||
"filament_settings_id": ["PLA"],
|
||||
"filament_vendor": ["Generic"],
|
||||
"from": "system",
|
||||
"hot_plate_temp": ["50"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"inherits": "fdm_filament_common",
|
||||
"name": "fdm_filament_pla",
|
||||
"pressure_advance": ["0"],
|
||||
"slow_down_layer_time": ["25"],
|
||||
"version": "1.7.0.2",
|
||||
"instantiation": "false"
|
||||
}
|
||||
@@ -0,0 +1,20 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_type": ["rPETG"],
|
||||
"close_fan_the_first_x_layers": ["4"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"fan_max_speed": ["50"],
|
||||
"fan_min_speed": ["5"],
|
||||
"filament_diameter": ["2.4"],
|
||||
"filament_settings_id": ["rPETG"],
|
||||
"filament_vendor": ["Generic"],
|
||||
"from": "system",
|
||||
"hot_plate_temp": ["50"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"inherits": "fdm_filament_common",
|
||||
"name": "fdm_filament_rpetg",
|
||||
"pressure_advance": ["0"],
|
||||
"slow_down_layer_time": ["25"],
|
||||
"version": "1.7.0.2",
|
||||
"instantiation": "false"
|
||||
}
|
||||
@@ -0,0 +1,20 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_type": ["rPLA"],
|
||||
"close_fan_the_first_x_layers": ["4"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"fan_max_speed": ["50"],
|
||||
"fan_min_speed": ["5"],
|
||||
"filament_diameter": ["2.4"],
|
||||
"filament_settings_id": ["rPLA"],
|
||||
"filament_vendor": ["Generic"],
|
||||
"from": "system",
|
||||
"hot_plate_temp": ["50"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"inherits": "fdm_filament_common",
|
||||
"name": "fdm_filament_rpla",
|
||||
"pressure_advance": ["0"],
|
||||
"slow_down_layer_time": ["25"],
|
||||
"version": "1.7.0.2",
|
||||
"instantiation": "false"
|
||||
}
|
||||
Reference in New Issue
Block a user