update OrcaFilamentLibrary

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json

@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Marble @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "GFSNL06",
+    "filament_id": "OGFSNL06",
     "instantiation": "false",
     "filament_cost": [
         "31.99"

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json

@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @base",
     "inherits": "fdm_filament_pet",
     "from": "system",
-    "filament_id": "GFSNL08",
+    "filament_id": "OGFSNL08",
     "instantiation": "false",
     "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
     "cool_plate_temp": [

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json

@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "GFSNL02",
+    "filament_id": "OGFSNL02",
     "instantiation": "false",
     "filament_cost": [
         "25.99"

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json

@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "GFSNL04",
+    "filament_id": "OGFSNL04",
     "instantiation": "false",
     "filament_cost": [
         "18.99"

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json

@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "GFSNL03",
+    "filament_id": "OGFSNL03",
     "instantiation": "false",
     "filament_cost": [
         "18.99"

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json

@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "GFSNL05",
+    "filament_id": "OGFSNL05",
     "instantiation": "false",
     "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
     "filament_cost": [

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json

@@ -3,7 +3,7 @@
     "name": "SUNLU Wood PLA @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "GFSNL07",
+    "filament_id": "OGFSNL07",
     "instantiation": "false",
     "filament_cost": [
         "26.99"