Update QIDI profiles (#5017)

* Qidi.Json

* Qidi.json

* Qidi.json

resources/profiles/Qidi/machine/fdm_machine_common.json

@@ -8,7 +8,7 @@
         "40"
     ],
     "extruder_colour": [
-        "#FCE94F"
+        ""
     ],
     "extruder_offset": [
         "0x0"
@@ -64,7 +64,7 @@
         "0"
     ],
     "max_layer_height": [
-        "0.32"
+        "0.28"
     ],
     "min_layer_height": [
         "0.08"
@@ -79,19 +79,19 @@
     "printer_settings_id": "",
     "printer_variant": "0.4",
     "retraction_minimum_travel": [
-        "2"
+        "1"
     ],
     "retract_before_wipe": [
-        "70%"
+        "0%"
     ],
     "retract_when_changing_layer": [
         "1"
     ],
     "retraction_length": [
-        "5"
+        "1"
     ],
     "retract_length_toolchange": [
-        "1"
+        "2"
     ],
     "z_hop": [
         "0"
@@ -103,7 +103,7 @@
         "0"
     ],
     "retraction_speed": [
-        "60"
+        "30"
     ],
     "single_extruder_multi_material": "0",
     "change_filament_gcode": "",
@@ -111,7 +111,7 @@
         "1"
     ],
     "z_lift_type": "NormalLift",
-    "default_print_profile": "0.20mm Standard @Qidi XMax3",
+    "default_print_profile": "",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_start_gcode": "G28\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600",
 	"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\n{if max_layer_z < max_print_height / 2}\nG1 Z{max_print_height / 2 + 10} F600\n{else}\nG1 Z{min(max_print_height, max_layer_z + 10)}\n{endif}\nG0 X5 Y{print_bed_max[1]-11} F12000\nM141 S0"