feat(belt/calib): add Overhang temperature-tower model (selectable) (#48)

Browse Source

Belt printers can't slice a tall vertical temperature tower. This adds a
belt-specific temperature-tower model — a row of discrete, individually
engraved provini laid along the belt, each printed at one temperature via
custom per-layer M104. Each provino is an inverted-L overhang that stresses
print quality, so the operator reads the best temperature off overhang
quality rather than a continuous ramp.

It is offered as a "Test model" choice in the temperature calibration dialog
(mirroring the Cornering test's selector), so users keep Joe's counter-rotated
sectioned tower as "Standard" and can pick this one as "Overhang":
- Calib_Params::test_model (existing field) carries the choice.
- Temp_Calibration_Dlg gets a Standard/Overhang radio.
- Plater::calib_temp belt branch: test_model 0 -> _calib_temp_belt_sectioned
  (unchanged Standard path), 1 -> the discrete-provini Overhang path.

Assets: belt_temp_provino_unit.stl + belt_temp_tower_<start>_<end>.stl (6
ranges) + gen_belt_temp_tower.py (manifold engraving). Based on
belt/generic-calibrations. The Overhang path is HW-validated on the IdeaFormer
IR3 V2 (discrete M104 + engraved numbers); not re-validated since the rebase.

...

This commit is contained in:

Tommaso Bianchi

2026-06-12 10:17:23 +02:00

committed by harrierpigeon

parent 0da24cd38b

commit 85fd613cf7

11 changed files with 179 additions and 7 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download Patch File Download Diff File Expand all files Collapse all files

BIN

resources/calib/temperature_tower/belt_temp_tower_320_280.stl Normal file

Binary file not shown.