ENH: support cold pull for TPU

jira: [STUDIO-13529]
Change-Id: I6a44da3b2774305db179cfed0781d67e9b5a7e2e
(cherry picked from commit 0225c329c8eb8fee332d2cf9732b83ccd0c1dbb3)

resources/printers/filaments_blacklist.json

@@ -8,6 +8,16 @@
       "slot": "ams",
       "description": "TPU is not supported by AMS."
     },
+    {
+      "type": "TPU",
+      "action": "warning",
+      "description": "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer."
+    },
+    {
+      "type": "TPU-AMS",
+      "action": "warning",
+      "description": "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer."
+    },
     {
       "type": "PVA",
       "action": "warning",

src/slic3r/GUI/DeviceCore/DevFilaBlackList.cpp

@@ -171,6 +171,7 @@ void check_filaments(std::string  model_id,
 
             // Using in description
             L("TPU is not supported by AMS.");
+            L("Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer.");
             L("Damp PVA will become flexible and get stuck inside AMS, please take care to dry it before use.");
             L("Damp PVA is flexible and may get stuck in extruder. Dry it before use.");
             L("The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite.");

src/slic3r/GUI/PrePrintChecker.cpp

@@ -47,7 +47,6 @@ std::string PrePrintChecker::get_print_status_info(PrintDialogStatus status)
     case PrintStatusTimelapseWarning: return "PrintStatusTimelapseWarning";
     case PrintStatusMixAmsAndVtSlotWarning: return "PrintStatusMixAmsAndVtSlotWarning";
     case PrintStatusWarningKvalueNotUsed: return "PrintStatusWarningKvalueNotUsed";
-    case PrintStatusWarningTpuRightColdPulling: return "PrintStatusWarningTpuRightColdPulling";
     case PrintStatusHasFilamentInBlackListWarning: return "PrintStatusHasFilamentInBlackListWarning";
     case PrintStatusFilamentWarningHighChamberTemp: return "PrintStatusFilamentWarningHighChamberTemp";
     case PrintStatusFilamentWarningHighChamberTempCloseDoor: return "PrintStatusFilamentWarningHighChamberTempCloseDoor";
@@ -90,7 +89,6 @@ wxString PrePrintChecker::get_pre_state_msg(PrintDialogStatus status)
     case PrintStatusTPUUnsupportAutoCali: return _L("TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics calibration.");
     case PrintStatusWarningKvalueNotUsed: return _L("Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value.");
     case PrintStatusNotSupportedPrintAll: return _L("This printer does not support printing all plates");
-    case PrintStatusWarningTpuRightColdPulling: return _L("Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer.");
     }
     return wxEmptyString;
 }

src/slic3r/GUI/PrePrintChecker.hpp

@@ -94,7 +94,6 @@ enum PrintDialogStatus : unsigned int {
     // Warnings for filament
     PrintStatusFilamentWarningBegin,
     PrintStatusWarningKvalueNotUsed,
-    PrintStatusWarningTpuRightColdPulling,
     PrintStatusHasFilamentInBlackListWarning,
     PrintStatusFilamentWarningHighChamberTemp,
     PrintStatusFilamentWarningHighChamberTempCloseDoor,

src/slic3r/GUI/SelectMachine.cpp

@@ -1695,9 +1695,6 @@ void SelectMachineDialog::show_status(PrintDialogStatus status, std::vector<wxSt
     } else if (status == PrintStatusHasFilamentInBlackListWarning) {
         Enable_Refresh_Button(true);
         Enable_Send_Button(true);
-    } else if (status == PrintStatusWarningTpuRightColdPulling) {
-        Enable_Refresh_Button(true);
-        Enable_Send_Button(true);
     } else if (status == PrintStatusFilamentWarningHighChamberTempCloseDoor || status == PrintStatusFilamentWarningHighChamberTemp) {
         Enable_Refresh_Button(true);
         Enable_Send_Button(true);
@@ -3509,20 +3506,6 @@ void SelectMachineDialog::update_show_status(MachineObject* obj_)
         }
     }
 
-    /*Check the tpu at right*/
-    if (obj_->GetExtderSystem()->GetTotalExtderCount() == 2) {
-        for (const FilamentInfo& item : m_ams_mapping_result) {
-            if (item.ams_id.empty()) continue;
-            if (item.type.compare("TPU") != 0 && item.type.compare("TPU-AMS") != 0) { continue; }
-
-            int extruder_id = obj_->get_extruder_id_by_ams_id(item.ams_id);
-            if (extruder_id == MAIN_EXTRUDER_ID) {
-                show_status(PrintDialogStatus::PrintStatusWarningTpuRightColdPulling);
-                break;
-            }
-        }
-    }
-
     /*Check high temperture slicing*/
     if (m_print_type == PrintFromType::FROM_NORMAL) {
         std::set<string>  high_temp_filaments;