From 83ee4f447641383207a104c7c6944bae6d082690 Mon Sep 17 00:00:00 2001 From: Eric McCann Date: Fri, 2 Oct 2026 06:06:13 -0400 Subject: [PATCH] U1: add HF nozzle variants and output flow type to avoid warnings on printer (#16043) This is the bulk of the profile changes for U1 that led to the cooling catiant connection. The ugly end gcode is used by the printer's UI to complain if normal nozzle is installed but the file was sliced for highflow. [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts) --- resources/profiles/Snapmaker.json | 122 +++++- .../filament/Generic PETG @U1 0.2 nozzle.json | 27 ++ .../filament/Generic PETG @U1 0.4 nozzle.json | 27 ++ .../filament/Generic PETG @U1 0.6 nozzle.json | 27 ++ .../filament/Generic PETG @U1 0.8 nozzle.json | 27 ++ .../Generic PETG HF @U1 0.2 nozzle.json | 27 ++ .../Generic PETG HF @U1 0.4 nozzle.json | 27 ++ .../Generic PETG HF @U1 0.6 nozzle.json | 27 ++ .../Generic PETG HF @U1 0.8 nozzle.json | 27 ++ .../Generic PETG-CF @U1 0.4 nozzle.json | 27 ++ .../Generic PETG-CF @U1 0.6 nozzle.json | 23 ++ .../Generic PETG-CF @U1 0.8 nozzle.json | 23 ++ .../filament/Generic PLA @U1 0.2 nozzle.json | 31 ++ .../filament/Generic PLA @U1 0.4 nozzle.json | 31 ++ .../filament/Generic PLA @U1 0.6 nozzle.json | 31 ++ .../filament/Generic PLA @U1 0.8 nozzle.json | 31 ++ ...Generic PLA High Speed @U1 0.2 nozzle.json | 31 ++ ...Generic PLA High Speed @U1 0.4 nozzle.json | 31 ++ ...Generic PLA High Speed @U1 0.6 nozzle.json | 31 ++ ...Generic PLA High Speed @U1 0.8 nozzle.json | 31 ++ .../Generic PLA Silk @U1 0.2 nozzle.json | 31 ++ .../Generic PLA Silk @U1 0.4 nozzle.json | 27 ++ .../Generic PLA Silk @U1 0.6 nozzle.json | 27 ++ .../Generic PLA Silk @U1 0.8 nozzle.json | 27 ++ .../Generic PLA-CF @U1 0.4 nozzle.json | 31 ++ .../Generic PLA-CF @U1 0.6 nozzle.json | 31 ++ .../Generic PLA-CF @U1 0.8 nozzle.json | 31 ++ .../filament/Generic TPU @U1 0.4 nozzle.json | 27 ++ .../filament/Generic TPU @U1 0.6 nozzle.json | 27 ++ .../filament/Generic TPU @U1 0.8 nozzle.json | 27 ++ .../Polymaker General PLA Family @U1.json | 19 + .../Polymaker Silk PLA Family @U1.json | 19 + .../Polymaker Tough PLA Family @U1.json | 17 + .../Fiberon ASA-CF08 @Snapmaker U1.json | 18 + .../Fiberon PA12-CF10 @Snapmaker U1.json | 17 + .../Fiberon PA6-CF20 @Snapmaker U1.json | 17 + .../Fiberon PA612-ESD @Snapmaker U1.json | 16 + .../Fiberon PETG-ESD @Snapmaker U1.json | 14 + .../Fiberon PPS-GF20 @Snapmaker U1.json | 19 +- .../Panchroma CoPE @Snapmaker U1.json | 17 + .../Panchroma PLA @Snapmaker U1.json | 18 + ...Panchroma PLA Celestial @Snapmaker U1.json | 17 + .../Panchroma PLA Galaxy @Snapmaker U1.json | 17 + .../Panchroma PLA Glow @Snapmaker U1.json | 17 + .../Panchroma PLA Luminous @Snapmaker U1.json | 17 + .../Panchroma PLA Marble @Snapmaker U1.json | 17 + .../Panchroma PLA Matte @Snapmaker U1.json | 17 + .../Panchroma PLA Metallic @Snapmaker U1.json | 17 + .../Panchroma PLA Neon @Snapmaker U1.json | 17 + .../Panchroma PLA Satin @Snapmaker U1.json | 17 + .../Panchroma PLA Silk @Snapmaker U1.json | 17 + ...Panchroma PLA Starlight @Snapmaker U1.json | 17 + ...anchroma PLA Temp Shift @Snapmaker U1.json | 12 + ...nchroma PLA Translucent @Snapmaker U1.json | 17 + .../Panchroma PLA UV Shift @Snapmaker U1.json | 17 + .../PolyLite CosPLA @Snapmaker U1.json | 17 + .../PolyLite PETG @Snapmaker U1.json | 14 + ...lyLite PETG Translucent @Snapmaker U1.json | 14 + .../Polymaker/PolyLite PLA @Snapmaker U1.json | 17 + .../PolyLite PLA Galaxy @Snapmaker U1.json | 17 + .../PolyLite PLA Glow @Snapmaker U1.json | 17 + .../PolyLite PLA Luminous @Snapmaker U1.json | 17 + .../PolyLite PLA Neon @Snapmaker U1.json | 17 + .../PolyLite PLA Pro @Snapmaker U1.json | 12 + ...lyLite PLA Pro Metallic @Snapmaker U1.json | 18 + .../PolyLite PLA Starlight @Snapmaker U1.json | 17 + ...olyLite PLA Translucent @Snapmaker U1.json | 17 + .../PolyTerra PLA @Snapmaker U1.json | 17 + .../PolyTerra PLA Marble @Snapmaker U1.json | 17 + .../PolyTerra PLA+ @Snapmaker U1.json | 17 + .../Polymaker HT-PLA @Snapmaker U1.json | 17 + .../Polymaker HT-PLA-GF @Snapmaker U1.json | 17 + .../Polymaker PETG @Snapmaker U1.json | 13 + .../Polymaker PETG Galaxy @Snapmaker U1.json | 13 + .../Polymaker PLA @Snapmaker U1.json | 17 +- .../Polymaker PLA Pro @Snapmaker U1.json | 17 + ...ymaker PLA Pro Metallic @Snapmaker U1.json | 17 + .../Snapmaker/filament/Snapmaker ABS @U1.json | 53 +++ .../filament/Snapmaker ABS Benchy @U1.json | 14 + .../Snapmaker/filament/Snapmaker ASA @U1.json | 53 +++ ...akaway Support For PLA @U1 0.2 nozzle.json | 24 ++ ...akaway Support For PLA @U1 0.6 nozzle.json | 28 ++ ...akaway Support For PLA @U1 0.8 nozzle.json | 26 ++ ...apmaker Breakaway Support For PLA @U1.json | 30 ++ .../filament/Snapmaker PA-CF @U1.json | 12 + .../Snapmaker/filament/Snapmaker PET @U1.json | 12 + .../filament/Snapmaker PETG @U1.json | 12 + .../Snapmaker PETG HF @U1 0.2 nozzle.json | 31 +- .../Snapmaker PETG HF @U1 0.4 nozzle.json | 91 +++++ .../Snapmaker PETG HF @U1 0.6 nozzle.json | 31 +- .../Snapmaker PETG HF @U1 0.8 nozzle.json | 31 +- ...maker PETG Translucent @U1 0.2 nozzle.json | 29 +- ...maker PETG Translucent @U1 0.4 nozzle.json | 27 +- ...maker PETG Translucent @U1 0.6 nozzle.json | 28 +- ...maker PETG Translucent @U1 0.8 nozzle.json | 27 +- .../filament/Snapmaker PETG-CF @U1.json | 72 ++++ .../Snapmaker/filament/Snapmaker PLA @U1.json | 16 + .../filament/Snapmaker PLA Basic @U1.json | 43 ++ .../filament/Snapmaker PLA Eco @U1.json | 16 + ...aker PLA Full Spectrum @U1 0.4 nozzle.json | 53 ++- .../Snapmaker PLA Glow @U1 0.4 nozzle.json | 36 +- .../filament/Snapmaker PLA Lite @U1.json | 42 ++ .../Snapmaker PLA Matte @U1 0.2 nozzle.json | 53 ++- .../Snapmaker PLA Matte @U1 0.6 nozzle.json | 53 ++- .../Snapmaker PLA Matte @U1 0.8 nozzle.json | 53 ++- .../filament/Snapmaker PLA Matte @U1.json | 63 ++- .../filament/Snapmaker PLA Metal @U1.json | 16 + .../Snapmaker PLA Silk @U1 0.2 nozzle.json | 43 ++ .../Snapmaker PLA Silk @U1 0.6 nozzle.json | 43 ++ .../Snapmaker PLA Silk @U1 0.8 nozzle.json | 43 ++ .../filament/Snapmaker PLA Silk @U1.json | 49 ++- ...napmaker PLA SnapSpeed @U1 0.2 nozzle.json | 29 +- ...napmaker PLA SnapSpeed @U1 0.6 nozzle.json | 30 +- ...napmaker PLA SnapSpeed @U1 0.8 nozzle.json | 28 +- .../filament/Snapmaker PLA SnapSpeed @U1.json | 51 ++- ...pmaker PLA Translucent @U1 0.2 nozzle.json | 47 ++- ...pmaker PLA Translucent @U1 0.4 nozzle.json | 45 ++- ...pmaker PLA Translucent @U1 0.6 nozzle.json | 47 ++- ...pmaker PLA Translucent @U1 0.8 nozzle.json | 47 ++- .../Snapmaker PLA Wood @U1 0.4 nozzle.json | 43 +- .../Snapmaker PLA Wood @U1 0.6 nozzle.json | 35 +- .../Snapmaker PLA Wood @U1 0.8 nozzle.json | 35 +- .../Snapmaker PLA-CF @U1 0.4 nozzle.json | 51 ++- .../Snapmaker PLA-CF @U1 0.6 nozzle.json | 44 +- .../Snapmaker PLA-CF @U1 0.8 nozzle.json | 43 +- .../Snapmaker PVA @U1 0.6 nozzle.json | 30 +- .../Snapmaker PVA @U1 0.8 nozzle.json | 28 +- .../Snapmaker/filament/Snapmaker PVA @U1.json | 38 +- .../Snapmaker/filament/Snapmaker TPE @U1.json | 12 + .../Snapmaker TPU 90A @U1 0.6 nozzle.json | 33 ++ .../Snapmaker TPU 90A @U1 0.8 nozzle.json | 31 ++ .../filament/Snapmaker TPU 90A @U1.json | 30 ++ .../filament/Snapmaker TPU 95A @U1.json | 42 ++ .../Snapmaker TPU 95A HF @U1 0.6 nozzle.json | 30 ++ .../Snapmaker TPU 95A HF @U1 0.8 nozzle.json | 30 ++ .../filament/Snapmaker TPU 95A HF @U1.json | 33 ++ .../Snapmaker/filament/Snapmaker TPU @U1.json | 20 + .../filament/Snapmaker TPU High-Flow @U1.json | 21 + .../machine/Snapmaker U1 (0.2 nozzle).json | 110 ++++- .../machine/Snapmaker U1 (0.4 nozzle).json | 110 ++++- .../Snapmaker U1 (0.4+0.6 nozzle).json | 4 + .../machine/Snapmaker U1 (0.6 nozzle).json | 110 ++++- .../machine/Snapmaker U1 (0.8 nozzle).json | 110 ++++- .../Snapmaker/machine/Snapmaker U1.json | 2 +- .../profiles/Snapmaker/machine/fdm_U1.json | 377 +++++++++++++++++- ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 97 ++++- ...6 Standard @Snapmaker U1 (0.2 nozzle).json | 74 +++- ...Extra Fine @Snapmaker U1 (0.4 nozzle).json | 75 +++- ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 97 ++++- ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 122 +++++- ...8 Standard @Snapmaker U1 (0.2 nozzle).json | 74 +++- ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 97 ++++- ...0 Standard @Snapmaker U1 (0.2 nozzle).json | 72 +++- .../0.12 Fine @Snapmaker U1 (0.4 nozzle).json | 74 +++- ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 122 +++++- ...2 Standard @Snapmaker U1 (0.2 nozzle).json | 74 +++- ...4 Standard @Snapmaker U1 (0.2 nozzle).json | 74 +++- ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 122 +++++- ...16 Optimal @Snapmaker U1 (0.4 nozzle).json | 74 +++- ...8 Standard @Snapmaker U1 (0.6 nozzle).json | 85 +++- ...20 Quality @Snapmaker U1 (0.4 nozzle).json | 74 +++- ...0 Standard @Snapmaker U1 (0.4 nozzle).json | 74 +++- ...0 Standard @Snapmaker U1 (0.6 nozzle).json | 74 +++- ...0 Strength @Snapmaker U1 (0.4 nozzle).json | 75 +++- ...20 Support @Snapmaker U1 (0.4 nozzle).json | 74 +++- ... Support W @Snapmaker U1 (0.4 nozzle).json | 85 +++- ...0.24 Draft @Snapmaker U1 (0.4 nozzle).json | 74 +++- ...4 Standard @Snapmaker U1 (0.6 nozzle).json | 85 +++- ...4 Standard @Snapmaker U1 (0.8 nozzle).json | 85 +++- ....25 Benchy @Snapmaker U1 (0.4 nozzle).json | 274 +++++++++++-- ...xtra Draft @Snapmaker U1 (0.4 nozzle).json | 74 +++- ...0.30 Draft @Snapmaker U1 (0.6 nozzle).json | 76 +++- ...0 Standard @Snapmaker U1 (0.6 nozzle).json | 85 +++- ...0 Strength @Snapmaker U1 (0.6 nozzle).json | 85 +++- ...2 Standard @Snapmaker U1 (0.8 nozzle).json | 85 +++- ...6 Standard @Snapmaker U1 (0.6 nozzle).json | 85 +++- ...xtra Draft @Snapmaker U1 (0.6 nozzle).json | 78 +++- ...0 Standard @Snapmaker U1 (0.8 nozzle).json | 85 +++- ...2 Standard @Snapmaker U1 (0.6 nozzle).json | 85 +++- ...8 Standard @Snapmaker U1 (0.8 nozzle).json | 85 +++- ...6 Standard @Snapmaker U1 (0.8 nozzle).json | 74 +++- 181 files changed, 7705 insertions(+), 253 deletions(-) create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json index d13ed8bf21..4978095364 100644 --- a/resources/profiles/Snapmaker.json +++ b/resources/profiles/Snapmaker.json @@ -1,6 +1,6 @@ { "name": "Snapmaker", - "version": "02.04.00.16", + "version": "02.04.00.17", "force_update": "0", "description": "Snapmaker configurations", "machine_model_list": [ @@ -1448,6 +1448,10 @@ "name": "Snapmaker PETG HF @U1 0.2 nozzle", "sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json" }, + { + "name": "Snapmaker PETG HF @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.4 nozzle.json" + }, { "name": "Snapmaker PETG HF @U1 0.6 nozzle", "sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json" @@ -1920,6 +1924,122 @@ "name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle", "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json" }, + { + "name": "Generic PETG @U1 0.2 nozzle", + "sub_path": "filament/Generic PETG @U1 0.2 nozzle.json" + }, + { + "name": "Generic PETG @U1 0.4 nozzle", + "sub_path": "filament/Generic PETG @U1 0.4 nozzle.json" + }, + { + "name": "Generic PETG @U1 0.6 nozzle", + "sub_path": "filament/Generic PETG @U1 0.6 nozzle.json" + }, + { + "name": "Generic PETG @U1 0.8 nozzle", + "sub_path": "filament/Generic PETG @U1 0.8 nozzle.json" + }, + { + "name": "Generic PETG HF @U1 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @U1 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @U1 0.4 nozzle", + "sub_path": "filament/Generic PETG HF @U1 0.4 nozzle.json" + }, + { + "name": "Generic PETG HF @U1 0.6 nozzle", + "sub_path": "filament/Generic PETG HF @U1 0.6 nozzle.json" + }, + { + "name": "Generic PETG HF @U1 0.8 nozzle", + "sub_path": "filament/Generic PETG HF @U1 0.8 nozzle.json" + }, + { + "name": "Generic PETG-CF @U1 0.4 nozzle", + "sub_path": "filament/Generic PETG-CF @U1 0.4 nozzle.json" + }, + { + "name": "Generic PETG-CF @U1 0.6 nozzle", + "sub_path": "filament/Generic PETG-CF @U1 0.6 nozzle.json" + }, + { + "name": "Generic PETG-CF @U1 0.8 nozzle", + "sub_path": "filament/Generic PETG-CF @U1 0.8 nozzle.json" + }, + { + "name": "Generic PLA @U1 0.2 nozzle", + "sub_path": "filament/Generic PLA @U1 0.2 nozzle.json" + }, + { + "name": "Generic PLA @U1 0.4 nozzle", + "sub_path": "filament/Generic PLA @U1 0.4 nozzle.json" + }, + { + "name": "Generic PLA @U1 0.6 nozzle", + "sub_path": "filament/Generic PLA @U1 0.6 nozzle.json" + }, + { + "name": "Generic PLA @U1 0.8 nozzle", + "sub_path": "filament/Generic PLA @U1 0.8 nozzle.json" + }, + { + "name": "Generic PLA High Speed @U1 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @U1 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @U1 0.4 nozzle", + "sub_path": "filament/Generic PLA High Speed @U1 0.4 nozzle.json" + }, + { + "name": "Generic PLA High Speed @U1 0.6 nozzle", + "sub_path": "filament/Generic PLA High Speed @U1 0.6 nozzle.json" + }, + { + "name": "Generic PLA High Speed @U1 0.8 nozzle", + "sub_path": "filament/Generic PLA High Speed @U1 0.8 nozzle.json" + }, + { + "name": "Generic PLA Silk @U1 0.2 nozzle", + "sub_path": "filament/Generic PLA Silk @U1 0.2 nozzle.json" + }, + { + "name": "Generic PLA Silk @U1 0.4 nozzle", + "sub_path": "filament/Generic PLA Silk @U1 0.4 nozzle.json" + }, + { + "name": "Generic PLA Silk @U1 0.6 nozzle", + "sub_path": "filament/Generic PLA Silk @U1 0.6 nozzle.json" + }, + { + "name": "Generic PLA Silk @U1 0.8 nozzle", + "sub_path": "filament/Generic PLA Silk @U1 0.8 nozzle.json" + }, + { + "name": "Generic PLA-CF @U1 0.4 nozzle", + "sub_path": "filament/Generic PLA-CF @U1 0.4 nozzle.json" + }, + { + "name": "Generic PLA-CF @U1 0.6 nozzle", + "sub_path": "filament/Generic PLA-CF @U1 0.6 nozzle.json" + }, + { + "name": "Generic PLA-CF @U1 0.8 nozzle", + "sub_path": "filament/Generic PLA-CF @U1 0.8 nozzle.json" + }, + { + "name": "Generic TPU @U1 0.4 nozzle", + "sub_path": "filament/Generic TPU @U1 0.4 nozzle.json" + }, + { + "name": "Generic TPU @U1 0.6 nozzle", + "sub_path": "filament/Generic TPU @U1 0.6 nozzle.json" + }, + { + "name": "Generic TPU @U1 0.8 nozzle", + "sub_path": "filament/Generic TPU @U1 0.8 nozzle.json" + }, { "name": "PolyTerra J1 PLA", "sub_path": "filament/Polymaker/PolyTerra J1 PLA.json" diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json new file mode 100644 index 0000000000..c834c68ac0 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PETG @U1 0.2 nozzle", + "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "Iw7T4qqDf1fbSAa1", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "10", + "1" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json new file mode 100644 index 0000000000..e731e11e44 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PETG @U1 0.4 nozzle", + "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "VHRa4TXU7HPz7Fld", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "10", + "12" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json new file mode 100644 index 0000000000..906aee7e15 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PETG @U1 0.6 nozzle", + "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "Ubr8v7BTxiQMntVk", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "10", + "12" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json new file mode 100644 index 0000000000..8a5f1c8a0a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PETG @U1 0.8 nozzle", + "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "ro0mXCLzC5rY95oX", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "10", + "12" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json new file mode 100644 index 0000000000..abe817ca25 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PETG HF @U1 0.2 nozzle", + "inherits": "Generic PETG HF @System", + "from": "system", + "setting_id": "7yjLWAdcQe4ndo1z", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "20", + "1" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json new file mode 100644 index 0000000000..344c1fa542 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PETG HF @U1 0.4 nozzle", + "inherits": "Generic PETG HF @System", + "from": "system", + "setting_id": "XWWLYZWkD9ZNRPeO", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "20", + "16" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json new file mode 100644 index 0000000000..a3b51268ac --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PETG HF @U1 0.6 nozzle", + "inherits": "Generic PETG HF @System", + "from": "system", + "setting_id": "1dj4JdFabSql3cEg", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "20", + "16" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json new file mode 100644 index 0000000000..7c7461a9f2 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PETG HF @U1 0.8 nozzle", + "inherits": "Generic PETG HF @System", + "from": "system", + "setting_id": "1LYZ0KG5kQtaOOKt", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "20", + "16" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json new file mode 100644 index 0000000000..6c7cbbed8e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PETG-CF @U1 0.4 nozzle", + "inherits": "Generic PETG-CF @System", + "from": "system", + "setting_id": "wIKcBM1qLgzLEUJP", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11" + ], + "fan_min_speed": [ + "5", + "5" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json new file mode 100644 index 0000000000..7802955968 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Generic PETG-CF @U1 0.6 nozzle", + "inherits": "Generic PETG-CF @System", + "from": "system", + "setting_id": "FvrnBiPbjSvIF3kN", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "5", + "5" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json new file mode 100644 index 0000000000..651d9abe7c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Generic PETG-CF @U1 0.8 nozzle", + "inherits": "Generic PETG-CF @System", + "from": "system", + "setting_id": "SCfvzDgUWkFHmbtP", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "5", + "5" + ], + "fan_max_speed": [ + "40", + "40" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json new file mode 100644 index 0000000000..87bec786a4 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA @U1 0.2 nozzle", + "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "8pb3tert1D4w0SKP", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "1.6" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json new file mode 100644 index 0000000000..2282b0d8c7 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA @U1 0.4 nozzle", + "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "Uilm8oVmZzyxE3ba", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json new file mode 100644 index 0000000000..d05642b524 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA @U1 0.6 nozzle", + "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "aj4G9OSdgtQPqpkI", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json new file mode 100644 index 0000000000..c6b7968997 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA @U1 0.8 nozzle", + "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "zom29gBgIZmvjFmh", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json new file mode 100644 index 0000000000..2de305bf14 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @U1 0.2 nozzle", + "inherits": "Generic PLA High Speed @System", + "from": "system", + "setting_id": "rT8e5f81vwUpwPuq", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "18", + "2" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json new file mode 100644 index 0000000000..2f53c963c7 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @U1 0.4 nozzle", + "inherits": "Generic PLA High Speed @System", + "from": "system", + "setting_id": "ZUetX0WveqW8fy6f", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json new file mode 100644 index 0000000000..06975c412f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @U1 0.6 nozzle", + "inherits": "Generic PLA High Speed @System", + "from": "system", + "setting_id": "y2WY6qLA3xKZM1Mm", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json new file mode 100644 index 0000000000..33912857cc --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @U1 0.8 nozzle", + "inherits": "Generic PLA High Speed @System", + "from": "system", + "setting_id": "VwXJrdwxvzjlIGal", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json new file mode 100644 index 0000000000..659f7a2d4a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @U1 0.2 nozzle", + "inherits": "Generic PLA Silk @System", + "from": "system", + "setting_id": "381SJIDBre8HxHy2", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "7.5", + "2" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json new file mode 100644 index 0000000000..a9492bae7e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @U1 0.4 nozzle", + "inherits": "Generic PLA Silk @System", + "from": "system", + "setting_id": "Fd1g9OdeM3pUx8f5", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json new file mode 100644 index 0000000000..c55499d41c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @U1 0.6 nozzle", + "inherits": "Generic PLA Silk @System", + "from": "system", + "setting_id": "8rhmpBFmMj9vVZwG", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json new file mode 100644 index 0000000000..29b5d871b7 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @U1 0.8 nozzle", + "inherits": "Generic PLA Silk @System", + "from": "system", + "setting_id": "Fo7U7GYHZh1aZPLs", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json new file mode 100644 index 0000000000..f4d72075d6 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA-CF @U1 0.4 nozzle", + "inherits": "Generic PLA-CF @System", + "from": "system", + "setting_id": "6AWubtDE4PqrKVNJ", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json new file mode 100644 index 0000000000..057abda7b0 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA-CF @U1 0.6 nozzle", + "inherits": "Generic PLA-CF @System", + "from": "system", + "setting_id": "AvM44HgMCkOCnmzY", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json new file mode 100644 index 0000000000..1b611ddc59 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Generic PLA-CF @U1 0.8 nozzle", + "inherits": "Generic PLA-CF @System", + "from": "system", + "setting_id": "tvYAUvQEbbdBCIg2", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json new file mode 100644 index 0000000000..c9aaf2c98f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic TPU @U1 0.4 nozzle", + "inherits": "Generic TPU @System", + "from": "system", + "setting_id": "9d0jRdMgkPMahYL7", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "70", + "70" + ], + "fan_max_speed": [ + "70", + "70" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json new file mode 100644 index 0000000000..10e8559070 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic TPU @U1 0.6 nozzle", + "inherits": "Generic TPU @System", + "from": "system", + "setting_id": "LLjEPSU4l09N3Zb8", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "70", + "70" + ], + "fan_max_speed": [ + "70", + "70" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json new file mode 100644 index 0000000000..1f96300f1d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "name": "Generic TPU @U1 0.8 nozzle", + "inherits": "Generic TPU @System", + "from": "system", + "setting_id": "Wfhd3jLEjSKzCeHE", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "70", + "70" + ], + "fan_max_speed": [ + "70", + "70" + ], + "additional_cooling_fan_speed": [ + "70", + "70" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json index 0e743d7aee..5b0bf08517 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json @@ -10,15 +10,18 @@ "Snapmaker U1 (0.4 nozzle)" ], "enable_pressure_advance": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "15", "15" ], "filament_vendor": [ "Polymaker" ], "nozzle_temperature_range_high": [ + "230", "230" ], "temperature_vitrification": [ @@ -29,5 +32,21 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json index 990cc483f3..efc5c7a792 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json @@ -16,12 +16,15 @@ "Polymaker" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "nozzle_temperature_range_high": [ + "230", "230" ], "textured_plate_temp": [ @@ -29,5 +32,21 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json index 1dad000fb2..02a9306c72 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json @@ -13,6 +13,7 @@ "1.23" ], "filament_flow_ratio": [ + "0.96", "0.96" ], "filament_vendor": [ @@ -29,5 +30,21 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json index b38925e01b..4dd43b5a54 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json @@ -9,9 +9,27 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "pressure_advance": [ + "0.05", "0.05" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "10", + "10" + ], + "fan_max_speed": [ + "30", + "30" + ], + "additional_cooling_fan_speed": [ + "0", + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json index 1bb569c291..e18e95a908 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json @@ -9,18 +9,35 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_retraction_length": [ + "1.0", "1.0" ], "filament_z_hop": [ + "0.0", "0.0" ], "enable_pressure_advance": [ + "1", "1" ], "pressure_advance": [ + "0.05", "0.05" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "20", + "20" + ], + "fan_max_speed": [ + "50", + "50" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json index d6106faa50..453cfc22f5 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json @@ -9,18 +9,35 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_retraction_length": [ + "1.0", "1.0" ], "filament_z_hop": [ + "0.0", "0.0" ], "enable_pressure_advance": [ + "1", "1" ], "pressure_advance": [ + "0.08", "0.08" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "10", + "10" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json index 660f4e9ef2..e138910608 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json @@ -9,16 +9,32 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_retraction_length": [ + "1.0", "1.0" ], "filament_z_hop": [ + "0.0", "0.0" ], "description": " ", "enable_pressure_advance": [ + "1", "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "10", + "10" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json index 6e1797904c..c89f07d531 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json @@ -9,6 +9,7 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "supertack_plate_temp": [ @@ -18,6 +19,19 @@ "70" ], "pressure_advance": [ + "0.04", "0.04" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "10", + "10" + ], + "fan_max_speed": [ + "20", + "20" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json index 4f1a9fdc10..194b7ffee3 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json @@ -9,7 +9,24 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], - "description": " " + "description": " ", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "10", + "10" + ], + "additional_cooling_fan_speed": [ + "0", + "0" + ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json index 1ad0f0d820..247b2d5a83 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json index dcd84aeba9..a572019ee0 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json @@ -10,9 +10,27 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_wipe": [ + "0", "0" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json index 561c748be3..ab7c624d95 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json index fee27dc997..fed4023b6f 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json index 2f1135de61..23a9dfc261 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json index fd701bf8c3..ad27464abb 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json index 2a1dbab936..6f324f2e61 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json index 7652606816..8ecdda93d1 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json index fe8e68081c..25bb4078cf 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json index cf16cb95c9..60fee68897 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json index eff77a2aa9..27591b4e6e 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json index 1020a48f0a..1c3a47f2d5 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json index 114391b517..8e0996b241 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json index ca50194577..d7df9c06be 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json @@ -10,18 +10,30 @@ "Snapmaker U1 (0.4 nozzle)" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "15", "15" ], "slow_down_layer_time": [ "4" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json index cff9ec2011..226456fd28 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json index 1d4a6a0bbe..efa960062b 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json index 836723cf7a..6dc86739c6 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json index f51cc5eeec..0ccb2e01c0 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json @@ -9,6 +9,7 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "supertack_plate_temp": [ @@ -18,6 +19,19 @@ "70" ], "pressure_advance": [ + "0.05", "0.05" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "40", + "40" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json index a3efeee371..cb8e6578dc 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json @@ -9,6 +9,7 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "supertack_plate_temp": [ @@ -18,6 +19,19 @@ "70" ], "pressure_advance": [ + "0.05", "0.05" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "40", + "40" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json index 715d8060e4..f2673a19f1 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json index e096b1b9b3..b5bfd95b09 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json index a36d2b9de5..6e151ec544 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json index 874004e6ea..dfd69a6b3e 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json index fbbb2a4585..35b02e2822 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json index 47163a788c..ba2fec2e62 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json @@ -10,18 +10,30 @@ "Snapmaker U1 (0.4 nozzle)" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "15", "15" ], "slow_down_layer_time": [ "4" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json index b1611b961d..5128f9ae12 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json @@ -12,6 +12,7 @@ "; filament end gcode \n\n" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_start_gcode": [ @@ -25,6 +26,23 @@ "0" ], "enable_pressure_advance": [ + "0", + "0" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "0", "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json index 56108cfed2..4a6a1d795b 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json index 799e272fab..4aece8be01 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json index 244cf91471..1b74452fea 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json index 19e419ca36..338081c3c6 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json index c3dd9d5537..d5584b2a0c 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json index ef631e550b..40282c676a 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "0", + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json index ac49e4f7ac..3bb56f6d90 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json @@ -10,6 +10,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "0", + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json index a3e11c2cd2..4352675193 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json @@ -9,6 +9,7 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "supertack_plate_temp": [ @@ -16,5 +17,17 @@ ], "supertack_plate_temp_initial_layer": [ "70" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "50", + "50" + ], + "fan_max_speed": [ + "10", + "10" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json index ecac971c5e..01508958df 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json @@ -9,6 +9,7 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "supertack_plate_temp": [ @@ -16,5 +17,17 @@ ], "supertack_plate_temp_initial_layer": [ "70" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "50", + "50" + ], + "fan_max_speed": [ + "10", + "10" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json index ff614bc79f..7563775a62 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json @@ -9,12 +9,27 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "pressure_advance": [ + "0.05", "0.05" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "0", + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json index d5823b53a6..93efc8ee96 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "0", + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json index a26fb437e7..7ff4a36616 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json @@ -9,6 +9,23 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "0", + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json index fe6c59ba80..0609264bef 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json @@ -9,6 +9,59 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_retract_length_toolchange": [ + "5", "5" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_z_hop_types": [ + "nil", + "Slope Lift" + ], + "filament_multitool_ramming": [ + "0", + "1" + ], + "nozzle_temperature": [ + "260", + "280" + ], + "filament_max_volumetric_speed": [ + "8", + "22" + ], + "fan_max_speed": [ + "15", + "60" + ], + "additional_cooling_fan_speed": [ + "0", + "0" + ], + "filament_multitool_ramming_flow": [ + "10", + "30" + ], + "filament_minimal_purge_on_wipe_tower": [ + "0", + "15" + ], + "fan_min_speed": [ + "15", + "10" + ], + "filament_multitool_ramming_volume": [ + "0", + "5" + ], + "nozzle_temperature_initial_layer": [ + "260", + "280" + ], + "filament_retraction_length": [ + "0.6", + "0.2" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json index 1ba6c22c9a..7e8369a506 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json @@ -22,33 +22,43 @@ "2" ], "filament_deretraction_speed": [ + "55", "55" ], "filament_max_volumetric_speed": [ + "31", "31" ], "filament_retract_when_changing_layer": [ + "0", "0" ], "filament_retraction_length": [ + "0.5", "0.5" ], "filament_z_hop": [ + "0", "0" ], "filament_retraction_speed": [ + "55", "55" ], "filament_wipe": [ + "0", "0" ], "nozzle_temperature": [ + "250", "250" ], "fan_max_speed": [ + "50", "50" ], "fan_min_speed": [ + "35", "35" ], "slow_down_min_speed": [ @@ -59,5 +69,9 @@ ], "default_filament_colour": [ "" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json index 67bde29e8d..b63dd9d5f7 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json @@ -9,6 +9,59 @@ "Snapmaker U1 (0.4 nozzle)" ], "filament_retract_length_toolchange": [ + "5", "5" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_z_hop_types": [ + "nil", + "Slope Lift" + ], + "filament_multitool_ramming": [ + "0", + "1" + ], + "nozzle_temperature": [ + "255", + "280" + ], + "filament_max_volumetric_speed": [ + "8", + "22" + ], + "fan_max_speed": [ + "15", + "25" + ], + "additional_cooling_fan_speed": [ + "0", + "0" + ], + "pressure_advance": [ + "0.04", + "0.02" + ], + "filament_multitool_ramming_flow": [ + "10", + "20" + ], + "filament_minimal_purge_on_wipe_tower": [ + "0", + "15" + ], + "fan_min_speed": [ + "0", + "10" + ], + "filament_multitool_ramming_volume": [ + "0", + "10" + ], + "nozzle_temperature_initial_layer": [ + "255", + "280" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json index 19dc66df4e..eea348becc 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json @@ -13,24 +13,30 @@ "PLA" ], "enable_pressure_advance": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_max_speed": [ + "30", "30" ], "fan_min_speed": [ + "20", "20" ], "filament_cost": [ @@ -40,36 +46,46 @@ "1.3" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "1", "1" ], "filament_max_volumetric_speed": [ + "0.5", "0.5" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ + "240", "240" ], "nozzle_temperature_initial_layer": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "pressure_advance": [ + "0.2", "0.2" ], "textured_plate_temp": [ @@ -85,15 +101,19 @@ "28" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "5", "5" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_unloading_speed": [ @@ -101,5 +121,9 @@ ], "filament_unloading_speed_start": [ "100" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json index 6f800f7b98..495ef711ac 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json @@ -13,6 +13,7 @@ "PLA" ], "enable_pressure_advance": [ + "0", "0" ], "filament_cost": [ @@ -22,21 +23,26 @@ "1.3" ], "filament_flow_ratio": [ + "0.95", "0.95" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ + "210", "210" ], "nozzle_temperature_initial_layer": [ + "210", "210" ], "nozzle_temperature_range_low": [ + "190", "190" ], "pressure_advance": [ + "0.02", "0.02" ], "textured_plate_temp": [ @@ -46,36 +52,46 @@ "65" ], "additional_cooling_fan_speed": [ + "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_min_speed": [ + "100", "100" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_wipe_distance": [ + "2", "2" ], "filament_cooling_moves": [ @@ -85,15 +101,19 @@ "28" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_unloading_speed": [ @@ -101,5 +121,13 @@ ], "filament_unloading_speed_start": [ "100" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json index c7a2b01351..cc7fcde0f6 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json @@ -13,18 +13,22 @@ "PLA" ], "enable_pressure_advance": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ @@ -34,33 +38,42 @@ "1.3" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "0.93", "0.93" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "3", "3" ], "filament_retraction_speed": [ + "nil", "nil" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ + "210", "210" ], "nozzle_temperature_initial_layer": [ + "210", "210" ], "nozzle_temperature_range_low": [ + "190", "190" ], "pressure_advance": [ + "0.015", "0.015" ], "textured_plate_temp_initial_layer": [ @@ -73,15 +86,19 @@ "28" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_unloading_speed": [ @@ -91,9 +108,18 @@ "100" ], "fan_min_speed": [ + "100", "100" ], "textured_plate_temp": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json index eff74ae5ab..b574fbeb38 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json @@ -13,54 +13,68 @@ "PLA" ], "enable_pressure_advance": [ + "1", "1" ], "additional_cooling_fan_speed": [ + "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_moves": [ "4" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "1", "1" ], "filament_loading_speed": [ "28" ], "filament_minimal_purge_on_wipe_tower": [ + "20", "20" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_unloading_speed": [ @@ -73,15 +87,19 @@ "65" ], "nozzle_temperature": [ + "210", "210" ], "nozzle_temperature_initial_layer": [ + "210", "210" ], "nozzle_temperature_range_low": [ + "190", "190" ], "pressure_advance": [ + "0.03", "0.03" ], "textured_plate_temp": [ @@ -89,5 +107,17 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "18" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json index b2dc562d3b..3d1965e97e 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json @@ -7,5 +7,17 @@ "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "15", + "15" + ], + "fan_max_speed": [ + "50", + "50" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json index e4dd0d2035..08beba6a2e 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json @@ -7,5 +7,17 @@ "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "26", + "26" + ], + "fan_max_speed": [ + "50", + "50" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json index 5df9952064..f2377ee1e4 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json @@ -7,5 +7,17 @@ "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "0", + "0" + ], + "fan_max_speed": [ + "20", + "20" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json index 9d9e3918cf..f88a4747ed 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json @@ -6,24 +6,30 @@ "setting_id": "Ujul2YTBwfldFiFd", "instantiation": "true", "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_max_volumetric_speed": [ - "1" + "1", + "2" ], "filament_ramming_travel_time": [ + "0", "0" ], "long_retractions_when_ec": [ + "0", "0" ], "retraction_distances_when_ec": [ + "0", "0" ], "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" ], "additional_cooling_fan_speed": [ + "70", "70" ], "eng_plate_temp": [ @@ -36,27 +42,34 @@ "20" ], "fan_max_speed": [ + "60", "60" ], "fan_min_speed": [ + "30", "30" ], "filament_end_gcode": [ "\n\n" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "3", "3" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1.5", "1.5" ], "filament_start_gcode": [ @@ -72,12 +85,15 @@ "80" ], "nozzle_temperature": [ + "245", "245" ], "nozzle_temperature_initial_layer": [ - "245" + "245", + "230" ], "nozzle_temperature_range_low": [ + "230", "230" ], "overhang_fan_speed": [ @@ -102,6 +118,15 @@ "80" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" + ], + "pressure_advance": [ + "0.03", + "0.0525" + ], + "filament_flow_ratio": [ + "0.95", + "0.955" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json new file mode 100644 index 0000000000..0a0f9726ff --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.4 nozzle", + "inherits": "Snapmaker PETG HF @U1 base2", + "from": "system", + "setting_id": "9NnYt52azW8zCp4a", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15", + "50" + ], + "nozzle_temperature_range_low": [ + "220", + "230" + ], + "fan_max_speed": [ + "40", + "60" + ], + "nozzle_temperature_initial_layer": [ + "220", + "230" + ], + "nozzle_temperature": [ + "220", + "245" + ], + "filament_multitool_ramming_volume": [ + "0", + "8" + ], + "filament_retraction_length": [ + "nil", + "0.8" + ], + "filament_wipe_distance": [ + "nil", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "30" + ], + "filament_retract_length_toolchange": [ + "nil", + "8" + ], + "pressure_advance": [ + "0.03", + "0.035" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_multitool_ramming_flow": [ + "10", + "30" + ], + "fan_min_speed": [ + "20", + "30" + ], + "filament_flow_ratio": [ + "0.95", + "0.955" + ], + "filament_z_hop_types": [ + "nil", + "Slope Lift" + ], + "filament_multitool_ramming": [ + "0", + "1" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "additional_cooling_fan_speed": [ + "0", + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json index 985505a027..d5c2396111 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json @@ -6,21 +6,26 @@ "setting_id": "2FfQZdp5xunngnF0", "instantiation": "true", "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_ramming_travel_time": [ + "0", "0" ], "long_retractions_when_ec": [ + "0", "0" ], "retraction_distances_when_ec": [ + "0", "0" ], "compatible_printers": [ "Snapmaker U1 (0.6 nozzle)" ], "additional_cooling_fan_speed": [ + "70", "70" ], "eng_plate_temp": [ @@ -33,30 +38,38 @@ "20" ], "fan_max_speed": [ + "60", "60" ], "fan_min_speed": [ + "30", "30" ], "filament_end_gcode": [ "\n" ], "filament_max_volumetric_speed": [ + "20", "20" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "2.5", "2.5" ], "filament_start_gcode": [ @@ -66,12 +79,15 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "1", "1" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ @@ -81,12 +97,15 @@ "80" ], "nozzle_temperature": [ + "245", "245" ], "nozzle_temperature_initial_layer": [ - "245" + "245", + "230" ], "nozzle_temperature_range_low": [ + "230", "230" ], "overhang_fan_speed": [ @@ -109,5 +128,13 @@ ], "textured_plate_temp_initial_layer": [ "80" + ], + "pressure_advance": [ + "0.03", + "0.0525" + ], + "filament_flow_ratio": [ + "0.95", + "0.955" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json index 83c1b17971..4f32268465 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json @@ -6,21 +6,26 @@ "setting_id": "ebANa67V4B2nwUaX", "instantiation": "true", "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_ramming_travel_time": [ + "0", "0" ], "long_retractions_when_ec": [ + "0", "0" ], "retraction_distances_when_ec": [ + "0", "0" ], "compatible_printers": [ "Snapmaker U1 (0.8 nozzle)" ], "additional_cooling_fan_speed": [ + "70", "70" ], "eng_plate_temp": [ @@ -33,27 +38,35 @@ "20" ], "fan_max_speed": [ + "60", "60" ], "fan_min_speed": [ + "30", "30" ], "filament_max_volumetric_speed": [ + "20", "20" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1", "1" ], "filament_start_gcode": [ @@ -63,12 +76,15 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "2", "2" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ @@ -78,12 +94,15 @@ "80" ], "nozzle_temperature": [ + "245", "245" ], "nozzle_temperature_initial_layer": [ - "245" + "245", + "230" ], "nozzle_temperature_range_low": [ + "230", "230" ], "overhang_fan_speed": [ @@ -106,5 +125,13 @@ ], "textured_plate_temp_initial_layer": [ "80" + ], + "pressure_advance": [ + "0.03", + "0.0525" + ], + "filament_flow_ratio": [ + "0.95", + "0.955" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json index ee6234f406..2f19d94258 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json @@ -9,21 +9,26 @@ "Snapmaker U1 (0.2 nozzle)" ], "additional_cooling_fan_speed": [ + "20", "20" ], "close_fan_the_first_x_layers": [ "3" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_max_speed": [ + "40", "40" ], "fan_min_speed": [ + "20", "20" ], "filament_cooling_moves": [ @@ -36,36 +41,46 @@ "1.25" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_loading_speed": [ "28" ], "filament_max_volumetric_speed": [ + "1", "1" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "5", "5" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "50", "50" ], "filament_unloading_speed": [ @@ -75,25 +90,30 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ "80" ], "nozzle_temperature": [ + "245", "245" ], "nozzle_temperature_initial_layer": [ + "250", "250" ], "nozzle_temperature_range_low": [ + "230", "230" ], "overhang_fan_threshold": [ "10%" ], "pressure_advance": [ - "0.23" + "0.23", + "0.2875" ], "slow_down_min_speed": [ "10" @@ -105,6 +125,11 @@ "80" ], "enable_pressure_advance": [ - "0" + "0", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json index e0e60a0e14..68d2f876b7 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json @@ -12,15 +12,19 @@ "3" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_max_speed": [ + "30", "30" ], "fan_min_speed": [ + "10", "10" ], "filament_cooling_moves": [ @@ -30,30 +34,38 @@ "24.99" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_loading_speed": [ "28" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_unloading_speed": [ @@ -63,25 +75,30 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ "80" ], "nozzle_temperature": [ + "250", "250" ], "nozzle_temperature_initial_layer": [ + "250", "250" ], "nozzle_temperature_range_low": [ + "230", "230" ], "overhang_fan_threshold": [ "10%" ], "pressure_advance": [ - "0.04" + "0.04", + "0.05" ], "slow_down_min_speed": [ "10" @@ -94,5 +111,13 @@ ], "filament_density": [ "1.25" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "additional_cooling_fan_speed": [ + "0", + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json index 14f59104f8..7ce482d10f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json @@ -12,15 +12,19 @@ "3" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_max_speed": [ + "60", "60" ], "fan_min_speed": [ + "20", "20" ], "filament_cost": [ @@ -30,28 +34,34 @@ "1.25" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "16", "16" ], "hot_plate_temp": [ "80" ], "nozzle_temperature": [ + "245", "245" ], "nozzle_temperature_initial_layer": [ + "250", "250" ], "nozzle_temperature_range_low": [ + "230", "230" ], "overhang_fan_threshold": [ "10%" ], "pressure_advance": [ - "0.02" + "0.02", + "0.025" ], "slow_down_min_speed": [ "10" @@ -69,24 +79,31 @@ "28" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "1.2", "1.2" ], "filament_retraction_minimum_travel": [ + "1", "1" ], "filament_unloading_speed": [ @@ -96,12 +113,19 @@ "100" ], "filament_wipe_distance": [ + "2", "2" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "enable_pressure_advance": [ - "0" + "0", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json index e746141f06..4c4773cb91 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json @@ -12,15 +12,19 @@ "3" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_max_speed": [ + "60", "60" ], "fan_min_speed": [ + "20", "20" ], "filament_cost": [ @@ -30,28 +34,34 @@ "1.25" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_max_volumetric_speed": [ + "16", "16" ], "hot_plate_temp": [ "80" ], "nozzle_temperature": [ + "245", "245" ], "nozzle_temperature_initial_layer": [ + "250", "250" ], "nozzle_temperature_range_low": [ + "230", "230" ], "overhang_fan_threshold": [ "10%" ], "pressure_advance": [ - "0.02" + "0.02", + "0.025" ], "slow_down_min_speed": [ "10" @@ -69,24 +79,31 @@ "28" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "30", "30" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_unloading_speed": [ @@ -96,9 +113,15 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "enable_pressure_advance": [ - "0" + "0", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json index f0bae32788..f8966e8633 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json @@ -7,5 +7,77 @@ "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_multitool_ramming": [ + "0", + "1" + ], + "nozzle_temperature": [ + "245", + "260" + ], + "filament_max_volumetric_speed": [ + "6.4", + "18" + ], + "fan_max_speed": [ + "20", + "40" + ], + "additional_cooling_fan_speed": [ + "0", + "20" + ], + "pressure_advance": [ + "0.03", + "0.028" + ], + "filament_multitool_ramming_flow": [ + "10", + "13" + ], + "filament_minimal_purge_on_wipe_tower": [ + "0", + "30" + ], + "nozzle_temperature_range_high": [ + "255", + "270" + ], + "nozzle_temperature_range_low": [ + "220", + "240" + ], + "filament_flow_ratio": [ + "0.95", + "1.01" + ], + "fan_min_speed": [ + "0", + "5" + ], + "filament_multitool_ramming_volume": [ + "0", + "0.5" + ], + "nozzle_temperature_initial_layer": [ + "250", + "260" + ], + "filament_retract_length_toolchange": [ + "nil", + "nil" + ], + "enable_pressure_advance": [ + "0", + "1" + ], + "filament_retraction_length": [ + "nil", + "0.6" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json index 1a2f9e3ff3..42abd9b5f5 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json @@ -13,5 +13,21 @@ ], "hot_plate_temp_initial_layer": [ "55" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json index 4b68672fa5..040cfbe850 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json @@ -9,24 +9,30 @@ "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "70", "70" ], "chamber_temperature": [ @@ -39,6 +45,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,12 +58,14 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -69,9 +78,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_final_speed": [ @@ -90,6 +101,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -99,6 +111,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_is_support": [ @@ -111,21 +124,27 @@ "50" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "15", "15" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "25", "25" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_notes": [ @@ -135,36 +154,47 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -201,15 +231,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "full_fan_speed_layer": [ @@ -225,15 +259,19 @@ "0" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -246,6 +284,7 @@ "0.4157" ], "pressure_advance": [ + "0.02", "0.02" ], "reduce_fan_stop_start_freq": [ @@ -280,5 +319,9 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json index fadf7e59d2..37ecf39eab 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json @@ -7,5 +7,21 @@ "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json index 219e8075e5..ef95d9b0e7 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json @@ -10,24 +10,30 @@ "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "70", "70" ], "chamber_temperature": [ @@ -40,6 +46,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -52,13 +59,15 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "eng_plate_temp": [ "60" @@ -70,9 +79,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_final_speed": [ @@ -91,6 +102,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -100,6 +112,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_is_support": [ @@ -112,21 +125,27 @@ "50" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "15", "15" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "25", "25" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_notes": [ @@ -136,36 +155,47 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ - "10" + "10", + "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ - "nil" + "nil", + "0.5" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -202,16 +232,20 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ - "nil" + "nil", + "Slope Lift" ], "full_fan_speed_layer": [ "0" @@ -226,15 +260,19 @@ "0" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -247,7 +285,8 @@ "0.4157" ], "pressure_advance": [ - "0.02" + "0.02", + "0.024" ], "reduce_fan_stop_start_freq": [ "1" @@ -281,5 +320,9 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json index 907781cd2c..9ea0ac1b29 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json @@ -9,12 +9,15 @@ "Snapmaker U1 (0.4 nozzle)" ], "additional_cooling_fan_speed": [ - "80" + "80", + "100" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cooling_final_speed": [ @@ -30,7 +33,8 @@ "20" ], "filament_flow_ratio": [ - "0.97" + "0.97", + "0.98" ], "filament_loading_speed": [ "28" @@ -39,27 +43,35 @@ "3" ], "filament_max_volumetric_speed": [ - "16" + "16", + "18" ], "filament_minimal_purge_on_wipe_tower": [ + "30", "30" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "0.4", "0.4" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_unloading_speed": [ @@ -69,9 +81,11 @@ "100" ], "filament_z_hop": [ + "0.2", "0.2" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp_initial_layer": [ @@ -91,5 +105,21 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "pressure_advance": [ + "0.02", + "0.023" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json index d2c9dddefb..baad41bb2f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json @@ -9,24 +9,30 @@ "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "70", "70" ], "chamber_temperature": [ @@ -39,6 +45,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -54,12 +61,14 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "1", "1" ], "eng_plate_temp": [ @@ -72,9 +81,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_final_speed": [ @@ -93,6 +104,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -102,6 +114,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_is_support": [ @@ -114,21 +127,27 @@ "50" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "15", "15" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "40", "40" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_notes": [ @@ -138,33 +157,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -201,15 +230,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "full_fan_speed_layer": [ @@ -225,15 +258,19 @@ "0" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -246,6 +283,7 @@ "0.4157" ], "pressure_advance": [ + "0.02", "0.02" ], "reduce_fan_stop_start_freq": [ @@ -280,5 +318,9 @@ ], "textured_plate_temp_initial_layer": [ "60" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json index 2a8c1e40c3..9b4a418dda 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json @@ -9,21 +9,26 @@ "Snapmaker U1 (0.2 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -36,6 +41,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,13 +57,15 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "eng_plate_temp": [ "45" @@ -69,9 +77,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ @@ -90,9 +100,11 @@ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_notes": [ @@ -102,33 +114,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "2", "2" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_shrink": [ @@ -156,12 +178,15 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "full_fan_speed_layer": [ @@ -171,9 +196,11 @@ "0" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -213,6 +240,7 @@ "40" ], "filament_max_volumetric_speed": [ + "2", "2" ], "hot_plate_temp": [ @@ -228,6 +256,7 @@ "65" ], "additional_cooling_fan_speed": [ + "80", "80" ], "filament_cooling_final_speed": [ @@ -240,10 +269,12 @@ "2" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ - "1.05" + "1.05", + "1.0395" ], "filament_loading_speed": [ "10" @@ -252,15 +283,19 @@ "50" ], "filament_minimal_purge_on_wipe_tower": [ + "5", "5" ], "filament_multitool_ramming_flow": [ + "4", "4" ], "filament_multitool_ramming_volume": [ + "4", "4" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_stamping_distance": [ @@ -273,15 +308,23 @@ "100" ], "filament_z_hop_types": [ + "nil", "nil" ], "nozzle_temperature": [ - "215" + "215", + "220" ], "nozzle_temperature_initial_layer": [ - "215" + "215", + "220" ], "pressure_advance": [ - "0.025" + "0.025", + "0.03" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json index 9de7615ae5..28ebc09582 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json @@ -9,21 +9,26 @@ "Snapmaker U1 (0.6 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -36,6 +41,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,13 +57,15 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "eng_plate_temp": [ "45" @@ -69,9 +77,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ @@ -81,6 +91,7 @@ "1.26" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -93,15 +104,19 @@ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "20", "20" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_notes": [ @@ -111,33 +126,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -165,15 +190,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "full_fan_speed_layer": [ @@ -183,9 +212,11 @@ "0" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -231,6 +262,7 @@ "45" ], "additional_cooling_fan_speed": [ + "80", "80" ], "filament_cooling_final_speed": [ @@ -243,7 +275,8 @@ "2" ], "filament_flow_ratio": [ - "0.99" + "0.99", + "0.9801" ], "filament_loading_speed": [ "10" @@ -252,12 +285,15 @@ "50" ], "filament_multitool_ramming_flow": [ + "40", "40" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_retraction_length": [ + "0.6", "0.6" ], "filament_stamping_distance": [ @@ -276,12 +312,19 @@ "65" ], "nozzle_temperature": [ - "215" + "215", + "220" ], "nozzle_temperature_initial_layer": [ - "215" + "215", + "220" ], "pressure_advance": [ - "0.015" + "0.015", + "0.018" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json index 251b2a47b6..89d36b18ae 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json @@ -9,21 +9,26 @@ "Snapmaker U1 (0.8 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -36,6 +41,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,13 +57,15 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "eng_plate_temp": [ "45" @@ -69,9 +77,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ @@ -87,21 +97,26 @@ " " ], "filament_flow_ratio": [ - "0.98" + "0.98", + "0.9702" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "20", "20" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_notes": [ @@ -111,30 +126,39 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_shrink": [ @@ -162,15 +186,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "full_fan_speed_layer": [ @@ -180,9 +208,11 @@ "0" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -222,7 +252,8 @@ "40" ], "nozzle_temperature": [ - "215" + "215", + "220" ], "textured_plate_temp": [ "65" @@ -231,6 +262,7 @@ "65" ], "additional_cooling_fan_speed": [ + "80", "80" ], "filament_cooling_final_speed": [ @@ -243,6 +275,7 @@ "2" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_loading_speed": [ @@ -252,15 +285,19 @@ "50" ], "filament_multitool_ramming_flow": [ + "40", "40" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_retraction_length": [ + "0.6", "0.6" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_stamping_distance": [ @@ -279,9 +316,15 @@ "65" ], "nozzle_temperature_initial_layer": [ - "215" + "215", + "220" ], "pressure_advance": [ - "0.015" + "0.015", + "0.018" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json index badf918d97..a017bcc49d 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json @@ -10,25 +10,31 @@ "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ - "80" + "80", + "100" ], "chamber_temperature": [ "0" @@ -40,6 +46,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -52,13 +59,15 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "eng_plate_temp": [ "60" @@ -70,9 +79,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_final_speed": [ @@ -91,6 +102,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -100,7 +112,8 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "1" + "1", + "0.99" ], "filament_is_support": [ "0" @@ -112,21 +125,27 @@ "50" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ - "22" + "22", + "40" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "40", "40" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_notes": [ @@ -136,36 +155,47 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ - "nil" + "nil", + "1" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -202,16 +232,20 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ - "nil" + "nil", + "1" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ - "nil" + "nil", + "Slope Lift" ], "full_fan_speed_layer": [ "0" @@ -226,15 +260,19 @@ "0" ], "nozzle_temperature": [ - "215" + "215", + "220" ], "nozzle_temperature_initial_layer": [ - "215" + "215", + "220" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -247,7 +285,8 @@ "0.4157" ], "pressure_advance": [ - "0.02" + "0.02", + "0.024" ], "reduce_fan_stop_start_freq": [ "1" @@ -281,5 +320,9 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json index 538158a155..9f52235909 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json @@ -7,5 +7,21 @@ "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json index e4fdb8016b..6d2653c296 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json @@ -10,24 +10,30 @@ "Snapmaker U1 (0.2 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "100", "100" ], "chamber_temperature": [ @@ -40,6 +46,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -49,12 +56,14 @@ "60" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -67,9 +76,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ @@ -79,6 +90,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -88,24 +100,30 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "1.02", "1.02" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "3", "3" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_notes": [ @@ -115,33 +133,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -169,15 +197,19 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -187,9 +219,11 @@ "0" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -253,9 +287,11 @@ "3" ], "filament_max_volumetric_speed": [ + "2", "2" ], "filament_retraction_length": [ + "0.4", "0.4" ], "filament_stamping_distance": [ @@ -274,12 +310,19 @@ "65" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "pressure_advance": [ + "0.015", "0.015" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json index b144ce86dd..740b873a76 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json @@ -10,24 +10,30 @@ "Snapmaker U1 (0.6 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "100", "100" ], "chamber_temperature": [ @@ -40,6 +46,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -49,12 +56,14 @@ "60" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -67,9 +76,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ @@ -79,6 +90,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -88,24 +100,30 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "40", "40" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_notes": [ @@ -115,33 +133,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -169,15 +197,19 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "1", "1" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -187,9 +219,11 @@ "0" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -253,9 +287,11 @@ "3" ], "filament_max_volumetric_speed": [ + "10", "10" ], "filament_retraction_length": [ + "0.4", "0.4" ], "filament_stamping_distance": [ @@ -274,12 +310,19 @@ "65" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "pressure_advance": [ + "0.015", "0.015" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json index aa92e97d18..f01e50b46e 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json @@ -10,24 +10,30 @@ "Snapmaker U1 (0.8 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "100", "100" ], "chamber_temperature": [ @@ -40,6 +46,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -49,12 +56,14 @@ "60" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -67,9 +76,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ @@ -79,6 +90,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -88,24 +100,30 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "40", "40" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_notes": [ @@ -115,33 +133,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -169,15 +197,19 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "1", "1" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -187,9 +219,11 @@ "0" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -253,9 +287,11 @@ "3" ], "filament_max_volumetric_speed": [ + "10", "10" ], "filament_retraction_length": [ + "0.4", "0.4" ], "filament_stamping_distance": [ @@ -274,12 +310,19 @@ "65" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "pressure_advance": [ + "0.015", "0.015" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json index 6b6030b919..f806f4325b 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json @@ -10,25 +10,31 @@ "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ - "70" + "70", + "80" ], "chamber_temperature": [ "0" @@ -40,6 +46,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -49,12 +56,14 @@ "60" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -67,9 +76,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ @@ -79,6 +90,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -88,24 +100,30 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "25", "25" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_notes": [ @@ -115,33 +133,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -169,16 +197,20 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ - "nil" + "nil", + "Slope Lift" ], "full_fan_speed_layer": [ "0" @@ -187,9 +219,11 @@ "0" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -253,9 +287,11 @@ "3" ], "filament_max_volumetric_speed": [ - "10" + "10", + "12" ], "filament_retraction_length": [ + "0.2", "0.2" ], "filament_stamping_distance": [ @@ -274,12 +310,19 @@ "65" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "pressure_advance": [ + "0.015", "0.015" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json index 7fcb20f31b..22173ad1f3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json @@ -6,24 +6,31 @@ "setting_id": "jsAgNNiUC6DoO7rz", "instantiation": "true", "filament_deretraction_speed": [ + "30", "30" ], "filament_flow_ratio": [ + "1.01", "1.01" ], "filament_max_volumetric_speed": [ + "2", "2" ], "filament_multitool_ramming_flow": [ + "30", "30" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_speed": [ + "30", "30" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ @@ -33,7 +40,8 @@ "65" ], "pressure_advance": [ - "0.2" + "0.2", + "0.24" ], "textured_plate_temp": [ "65" @@ -45,6 +53,23 @@ "Snapmaker U1 (0.2 nozzle)" ], "enable_pressure_advance": [ - "0" + "0", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json index 18fca8b4fd..19dadb2735 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json @@ -9,24 +9,31 @@ "Snapmaker U1 (0.6 nozzle)" ], "filament_deretraction_speed": [ + "30", "30" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_multitool_ramming_flow": [ + "30", "30" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1.6", "1.6" ], "filament_retraction_speed": [ + "30", "30" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "textured_plate_temp": [ @@ -36,6 +43,27 @@ "65" ], "enable_pressure_advance": [ - "0" + "0", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "pressure_advance": [ + "0.02", + "0.024" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json index 2ebadbd2b2..baf38623e5 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json @@ -9,25 +9,32 @@ "Snapmaker U1 (0.8 nozzle)" ], "filament_deretraction_speed": [ + "30", "30" ], "filament_multitool_ramming_flow": [ + "30", "30" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1.6", "1.6" ], "filament_retraction_speed": [ + "30", "30" ], "nozzle_temperature": [ + "215", "215" ], "pressure_advance": [ - "0.018" + "0.018", + "0.0216" ], "textured_plate_temp": [ "65" @@ -36,6 +43,23 @@ "65" ], "enable_pressure_advance": [ - "0" + "0", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json index 2525f5b2a9..0bc5a58986 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json @@ -9,24 +9,30 @@ "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "70", "70" ], "chamber_temperature": [ @@ -39,6 +45,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,13 +58,15 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "eng_plate_temp": [ "60" @@ -69,9 +78,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_final_speed": [ @@ -90,6 +101,7 @@ "1.24" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -99,6 +111,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.966", "0.966" ], "filament_is_support": [ @@ -111,21 +124,27 @@ "50" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ - "20" + "20", + "40" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ - "30" + "30", + "40" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_notes": [ @@ -135,36 +154,47 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "1.2", "1.2" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -201,15 +231,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "0.4", "0.4" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -225,15 +259,19 @@ "0" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -246,7 +284,8 @@ "0.4157" ], "pressure_advance": [ - "0.02" + "0.02", + "0.024" ], "reduce_fan_stop_start_freq": [ "1" @@ -280,5 +319,9 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json index 6271b7af42..e13c5b5c00 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json @@ -9,24 +9,30 @@ "Snapmaker U1 (0.2 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "100", "100" ], "chamber_temperature": [ @@ -39,6 +45,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,13 +58,15 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "eng_plate_temp": [ "60" @@ -69,9 +78,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_final_speed": [ @@ -90,6 +101,7 @@ "1.22" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -99,6 +111,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "1.02", "1.02" ], "filament_is_support": [ @@ -111,21 +124,27 @@ "3" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "1.6", "1.6" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "5", "5" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_notes": [ @@ -135,36 +154,47 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "0%", "0%" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "0.2", "0.2" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -201,15 +231,19 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "1", "1" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -225,15 +259,19 @@ "0" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "200", "200" ], "overhang_fan_speed": [ @@ -246,7 +284,8 @@ "0.4157" ], "pressure_advance": [ - "0.15" + "0.15", + "0.18" ], "reduce_fan_stop_start_freq": [ "1" @@ -280,5 +319,9 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json index 7d4270ef31..64cb69bab3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json @@ -9,24 +9,30 @@ "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "100", "100" ], "chamber_temperature": [ @@ -39,6 +45,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,12 +58,14 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "1", "1" ], "eng_plate_temp": [ @@ -69,9 +78,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_final_speed": [ @@ -90,6 +101,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -99,6 +111,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_is_support": [ @@ -111,21 +124,27 @@ "3" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "12", "12" ], "filament_minimal_purge_on_wipe_tower": [ + "50", "50" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_notes": [ @@ -135,36 +154,47 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "0.2", "0.2" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -201,15 +231,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -225,15 +259,19 @@ "0" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "190", "190" ], "overhang_fan_speed": [ @@ -246,7 +284,8 @@ "0.4157" ], "pressure_advance": [ - "0.02" + "0.02", + "0.024" ], "reduce_fan_stop_start_freq": [ "1" @@ -280,5 +319,9 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json index af3f95c757..8e0c82abc7 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json @@ -9,24 +9,30 @@ "Snapmaker U1 (0.6 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "100", "100" ], "chamber_temperature": [ @@ -39,6 +45,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,13 +58,15 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "eng_plate_temp": [ "60" @@ -69,9 +78,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_final_speed": [ @@ -90,6 +101,7 @@ "1.22" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -99,6 +111,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_is_support": [ @@ -111,21 +124,27 @@ "3" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "12", "12" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_notes": [ @@ -135,36 +154,47 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "0%", "0%" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "0.5", "0.5" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "50", "50" ], "filament_shrink": [ @@ -201,15 +231,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -225,15 +259,19 @@ "0" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "200", "200" ], "overhang_fan_speed": [ @@ -246,7 +284,8 @@ "0.4157" ], "pressure_advance": [ - "0.02" + "0.02", + "0.024" ], "reduce_fan_stop_start_freq": [ "1" @@ -280,5 +319,9 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json index a10a4b2fb1..3e92a6af2f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json @@ -9,24 +9,30 @@ "Snapmaker U1 (0.8 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "100", "100" ], "chamber_temperature": [ @@ -39,6 +45,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,13 +58,15 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "eng_plate_temp": [ "60" @@ -69,9 +78,11 @@ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_final_speed": [ @@ -90,6 +101,7 @@ "1.22" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -99,6 +111,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.95", "0.95" ], "filament_is_support": [ @@ -111,21 +124,27 @@ "3" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "12", "12" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_notes": [ @@ -135,36 +154,47 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "0%", "0%" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -201,15 +231,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -225,15 +259,19 @@ "0" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "nozzle_temperature_range_high": [ + "240", "240" ], "nozzle_temperature_range_low": [ + "200", "200" ], "overhang_fan_speed": [ @@ -246,7 +284,8 @@ "0.4157" ], "pressure_advance": [ - "0.02" + "0.02", + "0.024" ], "reduce_fan_stop_start_freq": [ "1" @@ -280,5 +319,9 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json index 283d5876b7..9841b17c95 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json @@ -13,15 +13,18 @@ "" ], "enable_pressure_advance": [ + "1", "1" ], "filament_end_gcode": [ "\n" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_vendor": [ @@ -40,36 +43,45 @@ "65" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_max_volumetric_speed": [ - "18" + "18", + "20" ], "filament_multitool_ramming_flow": [ + "40", "40" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_retract_length_toolchange": [ - "5" + "5", + "6" ], "filament_retraction_length": [ + "0.6", "0.6" ], "pressure_advance": [ - "0.025" + "0.025", + "0.024" ], "slow_down_layer_time": [ "4" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -79,21 +91,26 @@ "35" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "nozzle_temperature": [ + "220", "220" ], "overhang_fan_threshold": [ @@ -104,5 +121,25 @@ ], "temperature_vitrification": [ "45" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_z_hop_types": [ + "nil", + "Auto Lift" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json index 09555457d5..f5fbcfba3a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json @@ -13,15 +13,18 @@ "" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "filament_end_gcode": [ "\n" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_vendor": [ @@ -40,42 +43,53 @@ "65" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "18", "18" ], "filament_multitool_ramming_flow": [ + "40", "40" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "0.4", "0.4" ], "pressure_advance": [ - "0.014" + "0.014", + "0.0134" ], "slow_down_layer_time": [ "4" ], "additional_cooling_fan_speed": [ + "100", "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -85,21 +99,26 @@ "35" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "nozzle_temperature": [ + "220", "220" ], "overhang_fan_threshold": [ @@ -110,5 +129,17 @@ ], "temperature_vitrification": [ "45" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json index 4a5a04a5ee..e36e72e878 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json @@ -13,15 +13,18 @@ "" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "filament_end_gcode": [ "\n" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_vendor": [ @@ -40,42 +43,53 @@ "65" ], "filament_flow_ratio": [ + "0.965", "0.965" ], "filament_max_volumetric_speed": [ + "20", "20" ], "filament_multitool_ramming_flow": [ + "40", "40" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "0.4", "0.4" ], "pressure_advance": [ - "0.007" + "0.007", + "0.0067" ], "slow_down_layer_time": [ "4" ], "additional_cooling_fan_speed": [ + "100", "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -85,21 +99,26 @@ "35" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "nozzle_temperature": [ + "220", "220" ], "overhang_fan_threshold": [ @@ -110,5 +129,17 @@ ], "temperature_vitrification": [ "45" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json index 357c5de50a..b375be63da 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json @@ -11,16 +11,19 @@ "Snapmaker U1 (0.4 nozzle)" ], "enable_pressure_advance": [ + "1", "1" ], "filament_end_gcode": [ "" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ - "20" + "20", + "30" ], "filament_start_gcode": [ "" @@ -41,54 +44,69 @@ "65" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_max_volumetric_speed": [ - "15" + "15", + "20" ], "filament_minimal_purge_on_wipe_tower": [ + "50", "50" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_retract_length_toolchange": [ - "5" + "5", + "15" ], "filament_retraction_length": [ - "1" + "1", + "0.8" ], "filament_type": [ "PLA-CF" ], "filament_z_hop": [ + "0.4", "0.4" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "nozzle_temperature": [ - "240" + "240", + "230" ], "nozzle_temperature_initial_layer": [ - "240" + "240", + "230" ], "nozzle_temperature_range_high": [ + "250", "250" ], "nozzle_temperature_range_low": [ + "200", "200" ], "pressure_advance": [ - "0.01" + "0.01", + "0.02" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -98,18 +116,22 @@ "45" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "overhang_fan_threshold": [ @@ -128,6 +150,19 @@ "45" ], "additional_cooling_fan_speed": [ - "0" + "0", + "100" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json index 6f09ea5d6a..9f478e88ef 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json @@ -10,15 +10,18 @@ "Snapmaker U1 (0.6 nozzle)" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "filament_end_gcode": [ "" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "25", "25" ], "filament_start_gcode": [ @@ -40,46 +43,59 @@ "65" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "18", "18" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "2", "2" ], "filament_type": [ "PLA-CF" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "nozzle_temperature": [ - "220" + "220", + "210" ], "nozzle_temperature_initial_layer": [ - "220" + "220", + "210" ], "nozzle_temperature_range_high": [ + "250", "250" ], "nozzle_temperature_range_low": [ + "210", "210" ], "pressure_advance": [ - "0.015" + "0.015", + "0.03" ], "filament_cost": [ "35" @@ -91,15 +107,18 @@ "8" ], "filament_wipe_distance": [ + "2", "2" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -109,15 +128,19 @@ "45" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "overhang_fan_threshold": [ @@ -133,6 +156,19 @@ "45" ], "additional_cooling_fan_speed": [ + "0", "0" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json index 564e59e1a9..25dbb6746a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json @@ -10,15 +10,18 @@ "Snapmaker U1 (0.8 nozzle)" ], "enable_pressure_advance": [ - "0" + "0", + "1" ], "filament_end_gcode": [ "" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "25", "25" ], "filament_start_gcode": [ @@ -40,46 +43,59 @@ "65" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "18", "18" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "3", "3" ], "filament_type": [ "PLA-CF" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "nozzle_temperature": [ - "220" + "220", + "210" ], "nozzle_temperature_initial_layer": [ - "220" + "220", + "210" ], "nozzle_temperature_range_high": [ + "250", "250" ], "nozzle_temperature_range_low": [ + "210", "210" ], "pressure_advance": [ - "0.015" + "0.015", + "0.03" ], "filament_cost": [ "35" @@ -91,12 +107,14 @@ "8" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -106,15 +124,19 @@ "45" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "overhang_fan_threshold": [ @@ -130,6 +152,19 @@ "45" ], "additional_cooling_fan_speed": [ + "0", "0" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "100", + "100" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json index b28e0627ad..afd8ebbc2c 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json @@ -9,60 +9,75 @@ "Snapmaker U1 (0.6 nozzle)" ], "enable_pressure_advance": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ "79.98" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ - "0.98" + "0.98", + "0.9506" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_soluble": [ "1" ], "filament_wipe_distance": [ + "2", "2" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "nozzle_temperature_range_low": [ + "210", "210" ], "pressure_advance": [ + "0.03", "0.03" ], "slow_down_layer_time": [ @@ -90,15 +105,19 @@ "3" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_unloading_speed": [ @@ -108,6 +127,15 @@ "100" ], "fan_min_speed": [ + "100", + "100" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_max_speed": [ + "100", "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json index 6572a60078..5b61a78cb7 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json @@ -9,39 +9,49 @@ "Snapmaker U1 (0.8 nozzle)" ], "enable_pressure_advance": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ "79.98" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ - "0.96" + "0.96", + "0.9312" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_soluble": [ @@ -51,15 +61,19 @@ "65" ], "nozzle_temperature": [ + "225", "225" ], "nozzle_temperature_initial_layer": [ + "225", "225" ], "nozzle_temperature_range_low": [ + "205", "205" ], "pressure_advance": [ + "0.03", "0.03" ], "slow_down_layer_time": [ @@ -87,15 +101,19 @@ "3" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_flow": [ + "20", "20" ], "filament_multitool_ramming_volume": [ + "5", "5" ], "filament_unloading_speed": [ @@ -103,5 +121,13 @@ ], "filament_unloading_speed_start": [ "100" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json index 5ed5d243ac..72ae9bb87d 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json @@ -9,27 +9,34 @@ "Snapmaker U1 (0.4 nozzle)" ], "enable_pressure_advance": [ + "1", "1" ], "nozzle_temperature_range_high": [ + "240", "240" ], "pressure_advance": [ + "0.03", "0.03" ], "additional_cooling_fan_speed": [ + "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_min_speed": [ + "100", "100" ], "filament_cooling_final_speed": [ @@ -42,6 +49,7 @@ "4" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_loading_speed": [ @@ -51,24 +59,31 @@ "3" ], "filament_max_volumetric_speed": [ - "5" + "5", + "6" ], "filament_minimal_purge_on_wipe_tower": [ + "20", "20" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_volume": [ + "0.1", "0.1" ], "filament_retract_length_toolchange": [ + "4", "4" ], "filament_retraction_length": [ - "0.4" + "0.4", + "0.6" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_unloading_speed": [ @@ -78,15 +93,18 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ + "240", "240" ], "nozzle_temperature_initial_layer": [ + "240", "240" ], "slow_down_layer_time": [ @@ -97,5 +115,21 @@ ], "textured_plate_temp_initial_layer": [ "65" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_multitool_ramming_flow": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "0.97" + ], + "fan_max_speed": [ + "100", + "100" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json index a4214b6cd0..5f6820fa39 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json @@ -19,18 +19,22 @@ "65" ], "filament_flow_ratio": [ + "1.1", "1.1" ], "filament_density": [ "1.22" ], "filament_max_volumetric_speed": [ + "7.2", "7.2" ], "fan_max_speed": [ + "65", "65" ], "fan_min_speed": [ + "65", "65" ], "default_filament_colour": [ @@ -38,5 +42,13 @@ ], "filament_notes": [ "eSUN eLastic TPE-83A\n" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json index afb529e983..d065dddacd 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json @@ -7,6 +7,7 @@ "filament_id": "OFY7jxcS", "instantiation": "true", "filament_max_volumetric_speed": [ + "3.2", "3.2" ], "compatible_printers": [ @@ -19,69 +20,89 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_volume": [ + "0.1", "0.1" ], "pressure_advance": [ + "0.02", "0.02" ], "additional_cooling_fan_speed": [ + "100", "100" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_pressure_advance": [ + "0", "0" ], "filament_deretraction_speed": [ + "20", "20" ], "filament_flow_ratio": [ + "1.093", "1.093" ], "filament_multitool_ramming_flow": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "4", "4" ], "filament_retraction_length": [ + "0.6", "0.6" ], "filament_retraction_speed": [ + "20", "20" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "slow_down_layer_time": [ "14" ], "nozzle_temperature_range_high": [ + "240", "240" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "0", "0" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ @@ -100,27 +121,34 @@ "30" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "hot_plate_temp": [ @@ -145,6 +173,11 @@ "35" ], "nozzle_temperature_range_low": [ + "200", "200" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json index 8cf3452469..e2b0e51f4f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json @@ -7,6 +7,7 @@ "filament_id": "OFY7jxcS", "instantiation": "true", "filament_max_volumetric_speed": [ + "3.5", "3.5" ], "compatible_printers": [ @@ -19,63 +20,81 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_volume": [ + "0.1", "0.1" ], "pressure_advance": [ + "0.02", "0.02" ], "additional_cooling_fan_speed": [ + "70", "70" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_pressure_advance": [ + "0", "0" ], "filament_deretraction_speed": [ + "20", "20" ], "filament_flow_ratio": [ + "1.095", "1.095" ], "filament_multitool_ramming_flow": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "4", "4" ], "filament_retraction_length": [ + "1.2", "1.2" ], "filament_retraction_speed": [ + "20", "20" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "slow_down_layer_time": [ "14" ], "nozzle_temperature_range_high": [ + "240", "240" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ @@ -94,27 +113,34 @@ "30" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "hot_plate_temp": [ @@ -139,6 +165,11 @@ "35" ], "nozzle_temperature_range_low": [ + "200", "200" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json index 8f6ba9663f..2fc438f976 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json @@ -7,6 +7,7 @@ "filament_id": "OFY7jxcS", "instantiation": "true", "filament_max_volumetric_speed": [ + "3.2", "3.2" ], "compatible_printers": [ @@ -19,57 +20,73 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_volume": [ + "0.1", "0.1" ], "pressure_advance": [ + "0.4", "0.4" ], "additional_cooling_fan_speed": [ + "100", "100" ], "complete_print_exhaust_fan_speed": [ + "100", "100" ], "during_print_exhaust_fan_speed": [ + "100", "100" ], "enable_pressure_advance": [ + "0", "0" ], "filament_deretraction_speed": [ + "15", "15" ], "filament_flow_ratio": [ + "1.045", "1.045" ], "filament_multitool_ramming_flow": [ + "5", "5" ], "filament_retract_length_toolchange": [ + "2", "2" ], "filament_retraction_length": [ + "1.2", "1.2" ], "filament_retraction_speed": [ + "15", "15" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "slow_down_layer_time": [ "14" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ @@ -88,30 +105,38 @@ "30" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "hot_plate_temp": [ @@ -136,6 +161,11 @@ "35" ], "nozzle_temperature_range_low": [ + "200", "200" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json index 59b125ff72..6d5c2c4c73 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json @@ -9,24 +9,30 @@ "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ + "70", "70" ], "chamber_temperature": [ @@ -39,6 +45,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "80", "80" ], "cool_plate_temp": [ @@ -51,12 +58,14 @@ "0" ], "during_print_exhaust_fan_speed": [ + "60", "60" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -69,9 +78,11 @@ "100" ], "fan_max_speed": [ + "70", "70" ], "fan_min_speed": [ + "70", "70" ], "filament_cooling_final_speed": [ @@ -90,6 +101,7 @@ "1.24" ], "filament_deretraction_speed": [ + "8", "8" ], "filament_diameter": [ @@ -99,6 +111,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "1", "1" ], "filament_is_support": [ @@ -111,21 +124,27 @@ "3" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "3.2", "3.2" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_multitool_ramming": [ + "0", "0" ], "filament_multitool_ramming_flow": [ + "10", "10" ], "filament_multitool_ramming_volume": [ + "10", "10" ], "filament_notes": [ @@ -135,33 +154,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "1.4", "1.4" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "30", "30" ], "filament_shrink": [ @@ -198,15 +227,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "0.4", "0.4" ], "filament_z_hop_types": [ + "Auto Lift", "Auto Lift" ], "full_fan_speed_layer": [ @@ -222,15 +255,19 @@ "0" ], "nozzle_temperature": [ + "225", "225" ], "nozzle_temperature_initial_layer": [ + "225", "225" ], "nozzle_temperature_range_high": [ + "250", "250" ], "nozzle_temperature_range_low": [ + "200", "200" ], "overhang_fan_speed": [ @@ -243,6 +280,7 @@ "0.4157" ], "pressure_advance": [ + "0.02", "0.02" ], "reduce_fan_stop_start_freq": [ @@ -280,5 +318,9 @@ ], "default_filament_colour": [ "" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json index b9619dcca5..605b74a3ed 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json @@ -16,75 +16,94 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_volume": [ + "0.1", "0.1" ], "enable_pressure_advance": [ + "0", "0" ], "fan_cooling_layer_time": [ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "1.067", "1.067" ], "filament_max_volumetric_speed": [ + "12", "12" ], "filament_multitool_ramming_flow": [ + "10", "10" ], "filament_retract_length_toolchange": [ + "8", "8" ], "filament_retraction_length": [ + "0.8", "0.8" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "215", "215" ], "nozzle_temperature_initial_layer": [ + "215", "215" ], "overhang_fan_threshold": [ "95%" ], "pressure_advance": [ + "0.14", "0.14" ], "slow_down_layer_time": [ "8" ], "additional_cooling_fan_speed": [ + "100", "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -94,6 +113,7 @@ "30" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "eng_plate_temp": [ @@ -106,18 +126,23 @@ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "hot_plate_temp": [ @@ -142,6 +167,11 @@ "35" ], "nozzle_temperature_range_low": [ + "200", "200" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json index 4283ac2651..15d5e593ab 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json @@ -16,75 +16,94 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_volume": [ + "0.1", "0.1" ], "enable_pressure_advance": [ + "0", "0" ], "fan_cooling_layer_time": [ "100" ], "fan_max_speed": [ + "100", "100" ], "fan_min_speed": [ + "100", "100" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "1.045", "1.045" ], "filament_max_volumetric_speed": [ + "16", "16" ], "filament_multitool_ramming_flow": [ + "15", "15" ], "filament_retract_length_toolchange": [ + "8", "8" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "215", "215" ], "nozzle_temperature_initial_layer": [ + "215", "215" ], "overhang_fan_threshold": [ "95%" ], "pressure_advance": [ + "0.12", "0.12" ], "slow_down_layer_time": [ "12" ], "additional_cooling_fan_speed": [ + "100", "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -94,6 +113,7 @@ "30" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "eng_plate_temp": [ @@ -106,18 +126,23 @@ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "hot_plate_temp": [ @@ -142,6 +167,11 @@ "35" ], "nozzle_temperature_range_low": [ + "200", "200" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json index 816b78ceb8..dd61ccd234 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json @@ -16,69 +16,86 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ + "1", "1" ], "filament_multitool_ramming_volume": [ + "0.1", "0.1" ], "enable_pressure_advance": [ + "0", "0" ], "fan_cooling_layer_time": [ "40" ], "fan_max_speed": [ + "50", "50" ], "fan_min_speed": [ + "10", "10" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "1.067", "1.067" ], "filament_max_volumetric_speed": [ + "9", "9" ], "filament_multitool_ramming_flow": [ + "10", "10" ], "filament_retract_length_toolchange": [ + "6", "6" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "overhang_fan_threshold": [ "25%" ], "pressure_advance": [ + "0.23", "0.23" ], "slow_down_layer_time": [ "10" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -88,6 +105,7 @@ "30" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "eng_plate_temp": [ @@ -100,21 +118,27 @@ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ + "15", "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "hot_plate_temp": [ @@ -139,6 +163,15 @@ "35" ], "nozzle_temperature_range_low": [ + "200", "200" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json index ba393bed17..7de9731406 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json @@ -9,5 +9,25 @@ "Snapmaker U1 (0.4 nozzle)", "Snapmaker U1 (0.6 nozzle)", "Snapmaker U1 (0.8 nozzle)" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_max_volumetric_speed": [ + "2.8", + "10.5" + ], + "fan_min_speed": [ + "70", + "70" + ], + "fan_max_speed": [ + "70", + "70" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json index 0aca011924..a3afba536b 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json @@ -12,21 +12,42 @@ "Snapmaker U1 (0.8 nozzle)" ], "filament_flow_ratio": [ + "0.983", "0.983" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "7.6", "7.6" ], "filament_retraction_length": [ + "0.8", "0.8" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_notes": [ "!! It needs to be dried before use.\nSnapmaker TPU 95A High-Flow\n" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "fan_min_speed": [ + "70", + "70" + ], + "fan_max_speed": [ + "70", + "70" + ], + "additional_cooling_fan_speed": [ + "70", + "70" ] } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json index 674b82930c..6971ed458f 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json @@ -10,6 +10,10 @@ "auxiliary_fan": "1", "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", "deretraction_speed": [ + "30", + "30", + "30", + "30", "30", "30", "30", @@ -29,13 +33,25 @@ ], "host_type": "octoprint", "long_retractions_when_cut": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, in logical filament order\n; filament_volume_type = {(nozzle_volume_type[filament_map[0]-1] == 1 ? \"high_flow\" : \"standard\")}{if size(filament_type) > 1},{(nozzle_volume_type[filament_map[1]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}{if size(filament_type) > 2},{(nozzle_volume_type[filament_map[2]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}{if size(filament_type) > 3},{(nozzle_volume_type[filament_map[3]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}\n", "machine_max_jerk_z": [ + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", "3", "0.4", "3", @@ -46,6 +62,14 @@ "0.4" ], "machine_max_speed_e": [ + "30", + "25", + "30", + "25", + "30", + "25", + "30", + "25", "30", "25", "30", @@ -56,6 +80,14 @@ "25" ], "machine_max_speed_z": [ + "20", + "12", + "20", + "12", + "20", + "12", + "20", + "12", "20", "12", "20", @@ -86,6 +118,10 @@ "0.2" ], "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel", "hardened_steel", "hardened_steel", "hardened_steel", @@ -99,72 +135,120 @@ ], "printable_height": "270.05", "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%", "0%", "0%", "0%", "0%" ], "retract_length_toolchange": [ + "10", + "10", + "10", + "10", "10", "10", "10", "10" ], "retract_lift_above": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_lift_below": [ + "269", + "269", + "269", + "269", "269", "269", "269", "269" ], "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", "All Surfaces", "All Surfaces", "All Surfaces", "All Surfaces" ], "retract_restart_extra": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_when_changing_layer": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", "18", "18", "18", "18" ], "retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4", "0.4", "0.4", "0.4", "0.4" ], "retraction_minimum_travel": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "retraction_speed": [ + "30", + "30", + "30", + "30", "30", "30", "30", @@ -172,30 +256,50 @@ ], "thumbnails": "48x48/PNG, 300x300/PNG", "travel_slope": [ + "3", + "3", + "3", + "3", "3", "3", "3", "3" ], "wipe": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "wipe_distance": [ + "2", + "2", + "2", + "2", "2", "2", "2", "2" ], "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4", "0.4", "0.4", "0.4", "0.4" ], "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift", "Auto Lift", "Auto Lift", "Auto Lift", @@ -209,6 +313,10 @@ "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", "machine_pause_gcode": "M600", "nozzle_volume": [ + "143", + "143", + "143", + "143", "143", "143", "143", diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json index 3acd21c2dd..8438b121cb 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json @@ -10,6 +10,10 @@ "auxiliary_fan": "1", "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", "deretraction_speed": [ + "30", + "30", + "30", + "30", "30", "30", "30", @@ -29,13 +33,25 @@ ], "host_type": "octoprint", "long_retractions_when_cut": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, in logical filament order\n; filament_volume_type = {(nozzle_volume_type[filament_map[0]-1] == 1 ? \"high_flow\" : \"standard\")}{if size(filament_type) > 1},{(nozzle_volume_type[filament_map[1]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}{if size(filament_type) > 2},{(nozzle_volume_type[filament_map[2]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}{if size(filament_type) > 3},{(nozzle_volume_type[filament_map[3]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}\n", "machine_max_jerk_z": [ + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", "3", "0.4", "3", @@ -46,6 +62,14 @@ "0.4" ], "machine_max_speed_e": [ + "30", + "25", + "30", + "25", + "30", + "25", + "30", + "25", "30", "25", "30", @@ -56,6 +80,14 @@ "25" ], "machine_max_speed_z": [ + "20", + "12", + "20", + "12", + "20", + "12", + "20", + "12", "20", "12", "20", @@ -86,6 +118,10 @@ "0.4" ], "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel", "hardened_steel", "hardened_steel", "hardened_steel", @@ -99,72 +135,120 @@ ], "printable_height": "270.05", "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%", "0%", "0%", "0%", "0%" ], "retract_length_toolchange": [ + "10", + "10", + "10", + "10", "10", "10", "10", "10" ], "retract_lift_above": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_lift_below": [ + "269", + "269", + "269", + "269", "269", "269", "269", "269" ], "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", "All Surfaces", "All Surfaces", "All Surfaces", "All Surfaces" ], "retract_restart_extra": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_when_changing_layer": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", "18", "18", "18", "18" ], "retraction_length": [ + "1.5", + "1.5", + "1.5", + "1.5", "1.5", "1.5", "1.5", "1.5" ], "retraction_minimum_travel": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "retraction_speed": [ + "30", + "30", + "30", + "30", "30", "30", "30", @@ -172,30 +256,50 @@ ], "thumbnails": "48x48/PNG, 300x300/PNG", "travel_slope": [ + "3", + "3", + "3", + "3", "3", "3", "3", "3" ], "wipe": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "wipe_distance": [ + "2", + "2", + "2", + "2", "2", "2", "2", "2" ], "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4", "0.4", "0.4", "0.4", "0.4" ], "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift", "Auto Lift", "Auto Lift", "Auto Lift", @@ -211,6 +315,10 @@ "machine_pause_gcode": "M600", "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", "nozzle_volume": [ + "143", + "143", + "143", + "143", "143", "143", "143", diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json index cc4e7a0515..72812a6ba6 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json @@ -27,6 +27,10 @@ "0.6" ], "nozzle_type": [ + "stainless_steel", + "stainless_steel", + "stainless_steel", + "stainless_steel", "stainless_steel", "stainless_steel", "stainless_steel", diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json index 98b6f7e683..ec01b97698 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json @@ -10,6 +10,10 @@ "auxiliary_fan": "1", "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", "deretraction_speed": [ + "30", + "30", + "30", + "30", "30", "30", "30", @@ -29,13 +33,25 @@ ], "host_type": "octoprint", "long_retractions_when_cut": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, in logical filament order\n; filament_volume_type = {(nozzle_volume_type[filament_map[0]-1] == 1 ? \"high_flow\" : \"standard\")}{if size(filament_type) > 1},{(nozzle_volume_type[filament_map[1]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}{if size(filament_type) > 2},{(nozzle_volume_type[filament_map[2]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}{if size(filament_type) > 3},{(nozzle_volume_type[filament_map[3]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}\n", "machine_max_jerk_z": [ + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", "3", "0.4", "3", @@ -46,6 +62,14 @@ "0.4" ], "machine_max_speed_e": [ + "30", + "25", + "30", + "25", + "30", + "25", + "30", + "25", "30", "25", "30", @@ -56,6 +80,14 @@ "25" ], "machine_max_speed_z": [ + "20", + "12", + "20", + "12", + "20", + "12", + "20", + "12", "20", "12", "20", @@ -86,6 +118,10 @@ "0.6" ], "nozzle_type": [ + "stainless_steel", + "stainless_steel", + "stainless_steel", + "stainless_steel", "stainless_steel", "stainless_steel", "stainless_steel", @@ -99,72 +135,120 @@ ], "printable_height": "270.05", "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%", "0%", "0%", "0%", "0%" ], "retract_length_toolchange": [ + "10", + "10", + "10", + "10", "10", "10", "10", "10" ], "retract_lift_above": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_lift_below": [ + "269", + "269", + "269", + "269", "269", "269", "269", "269" ], "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", "All Surfaces", "All Surfaces", "All Surfaces", "All Surfaces" ], "retract_restart_extra": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_when_changing_layer": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", "18", "18", "18", "18" ], "retraction_length": [ + "1.4", + "1.4", + "1.4", + "1.4", "1.4", "1.4", "1.4", "1.4" ], "retraction_minimum_travel": [ + "3", + "3", + "3", + "3", "3", "3", "3", "3" ], "retraction_speed": [ + "30", + "30", + "30", + "30", "30", "30", "30", @@ -172,30 +256,50 @@ ], "thumbnails": "48x48/PNG, 300x300/PNG", "travel_slope": [ + "3", + "3", + "3", + "3", "3", "3", "3", "3" ], "wipe": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "wipe_distance": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4", "0.4", "0.4", "0.4", "0.4" ], "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift", "Auto Lift", "Auto Lift", "Auto Lift", @@ -210,6 +314,10 @@ "machine_pause_gcode": "M600", "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", "nozzle_volume": [ + "143", + "143", + "143", + "143", "143", "143", "143", diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json index 6ab566e0aa..5bc11525e9 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json @@ -10,6 +10,10 @@ "auxiliary_fan": "1", "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", "deretraction_speed": [ + "30", + "30", + "30", + "30", "30", "30", "30", @@ -29,13 +33,25 @@ ], "host_type": "octoprint", "long_retractions_when_cut": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, in logical filament order\n; filament_volume_type = {(nozzle_volume_type[filament_map[0]-1] == 1 ? \"high_flow\" : \"standard\")}{if size(filament_type) > 1},{(nozzle_volume_type[filament_map[1]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}{if size(filament_type) > 2},{(nozzle_volume_type[filament_map[2]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}{if size(filament_type) > 3},{(nozzle_volume_type[filament_map[3]-1] == 1 ? \"high_flow\" : \"standard\")}{endif}\n", "machine_max_jerk_z": [ + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", "3", "0.4", "3", @@ -46,6 +62,14 @@ "0.4" ], "machine_max_speed_e": [ + "30", + "25", + "30", + "25", + "30", + "25", + "30", + "25", "30", "25", "30", @@ -56,6 +80,14 @@ "25" ], "machine_max_speed_z": [ + "20", + "12", + "20", + "12", + "20", + "12", + "20", + "12", "20", "12", "20", @@ -86,6 +118,10 @@ "0.8" ], "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel", "hardened_steel", "hardened_steel", "hardened_steel", @@ -99,72 +135,120 @@ ], "printable_height": "270.05", "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%", "0%", "0%", "0%", "0%" ], "retract_length_toolchange": [ + "10", + "10", + "10", + "10", "10", "10", "10", "10" ], "retract_lift_above": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_lift_below": [ + "269", + "269", + "269", + "269", "269", "269", "269", "269" ], "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", "All Surfaces", "All Surfaces", "All Surfaces", "All Surfaces" ], "retract_restart_extra": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0", "0", "0", "0", "0" ], "retract_when_changing_layer": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", "18", "18", "18", "18" ], "retraction_length": [ + "1.5", + "1.5", + "1.5", + "1.5", "1.5", "1.5", "1.5", "1.5" ], "retraction_minimum_travel": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "retraction_speed": [ + "30", + "30", + "30", + "30", "30", "30", "30", @@ -172,30 +256,50 @@ ], "thumbnails": "48x48/PNG, 300x300/PNG", "travel_slope": [ + "3", + "3", + "3", + "3", "3", "3", "3", "3" ], "wipe": [ + "1", + "1", + "1", + "1", "1", "1", "1", "1" ], "wipe_distance": [ + "2", + "2", + "2", + "2", "2", "2", "2", "2" ], "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4", "0.4", "0.4", "0.4", "0.4" ], "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift", "Auto Lift", "Auto Lift", "Auto Lift", @@ -210,6 +314,10 @@ "machine_pause_gcode": "M600", "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", "nozzle_volume": [ + "143", + "143", + "143", + "143", "143", "143", "143", diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json index 96eb53f81a..37169b4193 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json @@ -5,7 +5,7 @@ "family": "Snapmaker", "url": "", "model_id": "797581801", - "default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle", + "default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Generic PLA @U1 0.2 nozzle;Generic PLA @U1 0.4 nozzle;Generic PLA @U1 0.6 nozzle;Generic PLA @U1 0.8 nozzle;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle;Snapmaker PLA SnapSpeed @U1", "bed_model": "Snapmaker U1_bed.stl", "bed_texture": "Snapmaker U1_texture.svg", "nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/fdm_U1.json b/resources/profiles/Snapmaker/machine/fdm_U1.json index 0b3d89a303..17389ae8fc 100644 --- a/resources/profiles/Snapmaker/machine/fdm_U1.json +++ b/resources/profiles/Snapmaker/machine/fdm_U1.json @@ -12,17 +12,18 @@ "0.32", "0.32", "0.32", - "0.32", "0.32" ], "min_layer_height": [ "0.08", "0.08", "0.08", - "0.08", "0.08" ], "deretraction_speed": [ + "30", + "30", + "30", "30", "30", "30", @@ -33,17 +34,18 @@ "#FCE94F", "#FCE94F", "#FCE94F", - "#FCE94F", "#FCE94F" ], "extruder_offset": [ "0x0", "0x0", "0x0", - "0x0", "0x0" ], "long_retractions_when_cut": [ + "0", + "0", + "0", "0", "0", "0", @@ -54,10 +56,12 @@ "0.4", "0.4", "0.4", - "0.4", "0.4" ], "retract_before_wipe": [ + "70%", + "70%", + "70%", "70%", "70%", "70%", @@ -65,6 +69,9 @@ "70%" ], "retract_length_toolchange": [ + "2", + "2", + "2", "2", "2", "2", @@ -72,6 +79,9 @@ "2" ], "retract_lift_above": [ + "0", + "0", + "0", "0", "0", "0", @@ -79,6 +89,9 @@ "0" ], "retract_lift_below": [ + "0", + "0", + "0", "0", "0", "0", @@ -86,6 +99,9 @@ "0" ], "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", "All Surfaces", "All Surfaces", "All Surfaces", @@ -93,6 +109,9 @@ "All Surfaces" ], "retract_restart_extra": [ + "0", + "0", + "0", "0", "0", "0", @@ -100,6 +119,9 @@ "0" ], "retract_restart_extra_toolchange": [ + "0", + "0", + "0", "0", "0", "0", @@ -107,6 +129,9 @@ "0" ], "retract_when_changing_layer": [ + "1", + "1", + "1", "1", "1", "1", @@ -114,6 +139,9 @@ "1" ], "retraction_distances_when_cut": [ + "18", + "18", + "18", "18", "18", "18", @@ -121,6 +149,9 @@ "18" ], "retraction_length": [ + "0.8", + "0.8", + "0.8", "0.8", "0.8", "0.8", @@ -128,6 +159,9 @@ "0.8" ], "retraction_minimum_travel": [ + "1", + "1", + "1", "1", "1", "1", @@ -135,6 +169,9 @@ "1" ], "retraction_speed": [ + "30", + "30", + "30", "30", "30", "30", @@ -142,6 +179,9 @@ "30" ], "travel_slope": [ + "3", + "3", + "3", "3", "3", "3", @@ -149,6 +189,9 @@ "3" ], "wipe": [ + "1", + "1", + "1", "1", "1", "1", @@ -156,6 +199,9 @@ "1" ], "wipe_distance": [ + "1", + "1", + "1", "1", "1", "1", @@ -163,6 +209,9 @@ "1" ], "z_hop": [ + "0.4", + "0.4", + "0.4", "0.4", "0.4", "0.4", @@ -170,6 +219,9 @@ "0.4" ], "z_hop_types": [ + "Normal Lift", + "Normal Lift", + "Normal Lift", "Normal Lift", "Normal Lift", "Normal Lift", @@ -181,7 +233,16 @@ "change_filament_gcode": "", "machine_start_gcode": "PRINT_START TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif} BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]\n\nM83\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nM109 T0 S{first_layer_temperature[0]}\nT0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X40 E9 F800 ; continue purging and wipe the nozzle\nG0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nM109 T1 S{first_layer_temperature[1]}\nT1; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X80 E9 F800 ; continue purging and wipe the nozzle\nG0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nM109 T2 S{first_layer_temperature[2]}\nT2; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X220 E9 F800 ; continue purging and wipe the nozzle\nG0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nM109 T3 S{first_layer_temperature[3]}\nT3; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nM109 T4 S{first_layer_temperature[4]}\nT4; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool}; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n", "scan_first_layer": "0", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine" + ], "auxiliary_fan": "0", "support_multi_bed_types": "1", "default_bed_type": "Textured PEI Plate", @@ -194,5 +255,307 @@ "printable_height": "270.05", "bed_mesh_min": "3,3", "bed_mesh_max": "267,267", - "printer_agent": "snapmaker" + "printer_agent": "snapmaker", + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow" + ], + "default_nozzle_volume_type": [ + "Standard", + "Standard", + "Standard", + "Standard" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_speed_y": [ + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200" + ], + "machine_max_speed_e": [ + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_speed_x": [ + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200" + ], + "machine_max_speed_z": [ + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12" + ], + "machine_max_acceleration_z": [ + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_jerk_z": [ + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4" + ] } diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json index 15546ce4bb..357aeda830 100644 --- a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,15 +1,43 @@ { "type": "process", "name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)", + "renamed_from": "0.06 High Quality Snapmaker U1 (0.2 nozzle);0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle);0.06 High Quality Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.06_nozzle_0.2", "from": "system", "setting_id": "3SCofR6VrVyo3vJp", "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": "4000", + "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000" + ], "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "500", + "60", + "500", + "60", + "500", + "60", + "500" + ], "sparse_infill_pattern": "gyroid", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" @@ -20,10 +48,69 @@ "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "13.5", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "wipe_tower_wall_type": "rib", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ] } diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json index 3881460bda..88bc187c8e 100644 --- a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)", + "renamed_from": "0.06 Standard Snapmaker U1 (0.2 nozzle);0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.06 Standard Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.06_nozzle_0.2", "from": "system", "setting_id": "997RaiNHd2YhpaRB", @@ -16,10 +17,79 @@ "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "13.5", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "wipe_tower_wall_type": "rib", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json index 0a3ba43c86..d102118041 100644 --- a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.08 Extra Fine Snapmaker U1 (0.4 nozzle);0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle);0.08 Extra Fine Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.08", "from": "system", "setting_id": "Tayg0K1WRyJMLoke", @@ -12,17 +13,85 @@ "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "18", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", "wipe_tower_cone_angle": "15", "wipe_tower_extra_spacing": "120%", "enable_arc_fitting": "0", - "outer_wall_speed": "100", + "outer_wall_speed": [ + "100", + "500", + "100", + "500", + "100", + "500", + "100", + "500" + ], "precise_outer_wall": "1", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom" + "gap_fill_target": "topbottom", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "350", + "600", + "350", + "600", + "350", + "600", + "350", + "600" + ], + "inner_wall_speed": [ + "350", + "600", + "350", + "600", + "350", + "600", + "350", + "600" + ], + "sparse_infill_speed": [ + "450", + "600", + "450", + "600", + "450", + "600", + "450", + "600" + ] } diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json index 2aeb309d58..b5d2ade0a4 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,15 +1,43 @@ { "type": "process", "name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)", + "renamed_from": "0.08 High Quality Snapmaker U1 (0.2 nozzle);0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle);0.08 High Quality Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.08_nozzle_0.2", "from": "system", "setting_id": "6ExpMU3Wq4J1R7wy", "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": "4000", + "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000" + ], "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "500", + "60", + "500", + "60", + "500", + "60", + "500" + ], "sparse_infill_pattern": "gyroid", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" @@ -20,10 +48,69 @@ "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "18", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "wipe_tower_wall_type": "rib", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ] } diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json index 107731b2cb..81b775fb9d 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -1,27 +1,109 @@ { "type": "process", "name": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.08 High Quality Snapmaker U1 (0.4 nozzle);0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle);0.08 High Quality Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.08", "from": "system", "setting_id": "Bld9ulv0wFza7OCb", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": "4000", - "gap_infill_speed": "210", - "inner_wall_speed": "120", - "internal_solid_infill_speed": "150", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", + "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000" + ], + "gap_infill_speed": [ + "210", + "210", + "210", + "210", + "210", + "210", + "210", + "210" + ], + "inner_wall_speed": [ + "120", + "600", + "120", + "600", + "120", + "600", + "120", + "600" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "500", + "60", + "500", + "60", + "500", + "60", + "500" + ], "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "150", - "top_surface_speed": "150", + "sparse_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "top_surface_speed": [ + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150" + ], "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "18", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -32,5 +114,25 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom" + "gap_fill_target": "topbottom", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ] } diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json index ea8c719085..16f85b3466 100644 --- a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)", + "renamed_from": "0.08 Standard Snapmaker U1 (0.2 nozzle);0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.08 Standard Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.08_nozzle_0.2", "from": "system", "setting_id": "loFrCYH9ux2L5JpZ", @@ -16,10 +17,79 @@ "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "18", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "wipe_tower_wall_type": "rib", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json index 6fc26cd55f..95719fcc46 100644 --- a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,15 +1,43 @@ { "type": "process", "name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)", + "renamed_from": "0.10 High Quality Snapmaker U1 (0.2 nozzle);0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle);0.10 High Quality Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.10_nozzle_0.2", "from": "system", "setting_id": "BfLpmnJnSBYBFInR", "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", - "default_acceleration": "4000", + "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000" + ], "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "500", + "60", + "500", + "60", + "500", + "60", + "500" + ], "sparse_infill_pattern": "gyroid", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" @@ -20,10 +48,69 @@ "prime_tower_brim_width": "5", "prime_tower_width": "28", "prime_volume": "25", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "wipe_tower_wall_type": "rib", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ] } diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json index d33ce1c083..d654bca839 100644 --- a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", + "renamed_from": "0.10 Standard Snapmaker U1 (0.2 nozzle);0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.10 Standard Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.10_nozzle_0.2", "from": "system", "setting_id": "SOq962UWv1ml1Mk0", @@ -23,5 +24,74 @@ "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", "wipe_tower_wall_type": "rib", - "slowdown_for_curled_perimeters": "0" + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json index 6de6d483da..7552908319 100644 --- a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.12 Fine @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.12 Fine Snapmaker U1 (0.4 nozzle);0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle);0.12 Fine Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.12", "from": "system", "setting_id": "xBU1j8ldOefYfosp", @@ -10,7 +11,16 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -24,5 +34,65 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom" + "gap_fill_target": "topbottom", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "350", + "600", + "350", + "600", + "350", + "600", + "350", + "600" + ], + "inner_wall_speed": [ + "350", + "600", + "350", + "600", + "350", + "600", + "350", + "600" + ], + "sparse_infill_speed": [ + "430", + "600", + "430", + "600", + "430", + "600", + "430", + "600" + ], + "outer_wall_speed": [ + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json index a5f215d7f3..7e473aeb2c 100644 --- a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -1,26 +1,108 @@ { "type": "process", "name": "0.12 High Quality @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.12 High Quality Snapmaker U1 (0.4 nozzle);0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle);0.12 High Quality Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.12", "from": "system", "setting_id": "WNWFsx5DJtCRAlFl", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": "4000", - "gap_infill_speed": "230", - "inner_wall_speed": "150", - "internal_solid_infill_speed": "180", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", + "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000" + ], + "gap_infill_speed": [ + "230", + "230", + "230", + "230", + "230", + "230", + "230", + "230" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "internal_solid_infill_speed": [ + "180", + "600", + "180", + "600", + "180", + "600", + "180", + "600" + ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "500", + "60", + "500", + "60", + "500", + "60", + "500" + ], "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "180", - "top_surface_speed": "150", + "sparse_infill_speed": [ + "180", + "600", + "180", + "600", + "180", + "600", + "180", + "600" + ], + "top_surface_speed": [ + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150" + ], "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], "prime_tower_width": "30", "prime_volume": "27", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "wipe_tower_filament": "0", "prime_tower_brim_width": "5", "wipe_tower_cone_angle": "15", @@ -33,5 +115,25 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom" + "gap_fill_target": "topbottom", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ] } diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json index 632d9614f7..d6038972a6 100644 --- a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)", + "renamed_from": "0.12 Standard Snapmaker U1 (0.2 nozzle);0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.12 Standard Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.12_nozzle_0.2", "from": "system", "setting_id": "KHC1zpxpuvaUEzvf", @@ -16,10 +17,79 @@ "prime_tower_brim_width": "5", "prime_tower_width": "28", "prime_volume": "27", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "wipe_tower_wall_type": "rib", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json index 0de823db1f..0bc45246f0 100644 --- a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.14 Standard @Snapmaker U1 (0.2 nozzle)", + "renamed_from": "0.14 Standard Snapmaker U1 (0.2 nozzle);0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.14 Standard Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.14_nozzle_0.2", "from": "system", "setting_id": "NGJoV0n6T510y9wM", @@ -16,10 +17,79 @@ "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "32", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "wipe_tower_wall_type": "rib", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json index 1306485d6f..ef1d0be7c0 100644 --- a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -1,27 +1,109 @@ { "type": "process", "name": "0.16 High Quality @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.16 High Quality Snapmaker U1 (0.4 nozzle);0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle);0.16 High Quality Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.16", "from": "system", "setting_id": "Ofe17WrGQ3MOrqNe", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": "4000", - "gap_infill_speed": "250", - "inner_wall_speed": "150", - "internal_solid_infill_speed": "200", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", + "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "internal_solid_infill_speed": [ + "200", + "600", + "200", + "600", + "200", + "600", + "200", + "600" + ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "500", + "60", + "500", + "60", + "500", + "60", + "500" + ], "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "200", - "top_surface_speed": "150", + "sparse_infill_speed": [ + "200", + "600", + "200", + "600", + "200", + "600", + "200", + "600" + ], + "top_surface_speed": [ + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150" + ], "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "36", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -33,5 +115,25 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom" + "gap_fill_target": "topbottom", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ] } diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json index 838f250e8c..79c1ad6f8f 100644 --- a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.16 Optimal Snapmaker U1 (0.4 nozzle);0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle);0.16 Optimal Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.16", "from": "system", "setting_id": "ERcgRLp5bQo1hgz8", @@ -12,7 +13,16 @@ "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "36", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -23,5 +33,65 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom" + "gap_fill_target": "topbottom", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "300", + "600", + "300", + "600", + "300", + "600", + "300", + "600" + ], + "inner_wall_speed": [ + "300", + "600", + "300", + "600", + "300", + "600", + "300", + "600" + ], + "sparse_infill_speed": [ + "330", + "600", + "330", + "600", + "330", + "600", + "330", + "600" + ], + "outer_wall_speed": [ + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json index 88fbb33812..cbe81ad191 100644 --- a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)", + "renamed_from": "0.18 Standard Snapmaker U1 (0.6 nozzle);0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.18 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.18_nozzle_0.6", "from": "system", "setting_id": "XGSrVgnsUFv6uCRs", @@ -12,7 +13,16 @@ ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", + "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], "layer_height": "0.25", "prime_tower_brim_width": "5", "prime_tower_width": "30", @@ -24,7 +34,76 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json index be894aa221..087ecfce38 100644 --- a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.20 Quality Snapmaker U1 (0.4 nozzle);0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle);0.20 Quality Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.20", "from": "system", "setting_id": "BBXxXQCXCme2Mvy0", @@ -11,11 +12,80 @@ ], "ooze_prevention": "1", "prime_tower_width": "30", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", "wipe_tower_cone_angle": "15", "prime_tower_brim_width": "5", - "initial_layer_print_height": "0.25" + "initial_layer_print_height": "0.25", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "250", + "600", + "250", + "600", + "250", + "600", + "250", + "600" + ], + "inner_wall_speed": [ + "300", + "600", + "300", + "600", + "300", + "600", + "300", + "600" + ], + "sparse_infill_speed": [ + "270", + "600", + "270", + "600", + "270", + "600", + "270", + "600" + ], + "outer_wall_speed": [ + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json index 443afe55dd..6db6d02815 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.20 Standard @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.20 Standard Snapmaker U1 (0.4 nozzle);0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle);0.20 Standard Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.20", "from": "system", "setting_id": "XR5r9SuWmSag5Qjo", @@ -12,11 +13,80 @@ "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "45", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", "wipe_tower_cone_angle": "15", "prime_tower_brim_width": "5", - "initial_layer_print_height": "0.25" + "initial_layer_print_height": "0.25", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "250", + "600", + "250", + "600", + "250", + "600", + "250", + "600" + ], + "inner_wall_speed": [ + "300", + "600", + "300", + "600", + "300", + "600", + "300", + "600" + ], + "sparse_infill_speed": [ + "270", + "600", + "270", + "600", + "270", + "600", + "270", + "600" + ], + "outer_wall_speed": [ + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json index 5c87ff68d0..205c968786 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.20 Standard @Snapmaker U1 (0.6 nozzle)", + "renamed_from": "0.20 Standard Snapmaker U1 (0.6 nozzle);0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.20 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.6_common", "from": "system", "setting_id": "6VM4QhgvHUmyf2um", @@ -12,7 +13,16 @@ ], "ooze_prevention": "1", "prime_tower_width": "30", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", @@ -20,5 +30,65 @@ "prime_tower_brim_width": "5", "initial_layer_print_height": "0.25", "top_shell_layers": "4", - "bottom_shell_layers": "3" + "bottom_shell_layers": "3", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "250", + "600", + "250", + "600", + "250", + "600", + "250", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json index 1d051fc801..d9c7d9a63d 100644 --- a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json @@ -1,12 +1,22 @@ { "type": "process", "name": "0.20 Strength @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.20 Strength Snapmaker U1 (0.4 nozzle);0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle);0.20 Strength Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.20", "from": "system", "setting_id": "bYnMOZxTq83EwIyd", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", - "outer_wall_speed": "60", + "outer_wall_speed": [ + "60", + "500", + "60", + "500", + "60", + "500", + "60", + "500" + ], "sparse_infill_density": "25%", "wall_loops": "6", "compatible_printers": [ @@ -15,7 +25,16 @@ "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "45", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -26,5 +45,55 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom" + "gap_fill_target": "topbottom", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "250", + "600", + "250", + "600", + "250", + "600", + "250", + "600" + ], + "inner_wall_speed": [ + "300", + "600", + "300", + "600", + "300", + "600", + "300", + "600" + ], + "sparse_infill_speed": [ + "270", + "600", + "270", + "600", + "270", + "600", + "270", + "600" + ] } diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json index 577065ca3f..fe14010038 100644 --- a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.20 Support @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.20 Support Snapmaker U1 (0.4 nozzle);0.20 Support @Snapmaker U1 (0.4 High Flow nozzle);0.20 Support Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.20", "from": "system", "setting_id": "4whjHJVCN44w8SPE", @@ -12,7 +13,16 @@ "ooze_prevention": "1", "prime_tower_width": "40", "prime_volume": "15", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", @@ -21,5 +31,65 @@ "enable_support": "1", "initial_layer_print_height": "0.25", "support_interface_spacing": "0", - "support_interface_top_layers": "3" + "support_interface_top_layers": "3", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "250", + "600", + "250", + "600", + "250", + "600", + "250", + "600" + ], + "inner_wall_speed": [ + "300", + "600", + "300", + "600", + "300", + "600", + "300", + "600" + ], + "sparse_infill_speed": [ + "270", + "600", + "270", + "600", + "270", + "600", + "270", + "600" + ], + "outer_wall_speed": [ + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json index 3d1887bea9..691b72de65 100644 --- a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.20 Support W @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.20 Support W Snapmaker U1 (0.4 nozzle);0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle);0.20 Support W Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.20", "from": "system", "setting_id": "M9JhI2roLcP4jYks", @@ -10,7 +11,16 @@ "support_top_z_distance": "0.2", "support_interface_loop_pattern": "1", "support_interface_spacing": "0", - "support_interface_speed": "80", + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80", + "80", + "80" + ], "support_filament": "0", "support_interface_filament": "0", "enable_prime_tower": "1", @@ -20,6 +30,75 @@ "ooze_prevention": "1", "prime_tower_width": "50", "prime_volume": "38", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "standby_temperature_delta": "-150", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "250", + "600", + "250", + "600", + "250", + "600", + "250", + "600" + ], + "inner_wall_speed": [ + "300", + "600", + "300", + "600", + "300", + "600", + "300", + "600" + ], + "sparse_infill_speed": [ + "270", + "600", + "270", + "600", + "270", + "600", + "270", + "600" + ], + "outer_wall_speed": [ + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json index 8e09376daf..f628b2947b 100644 --- a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.24 Draft @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.24 Draft Snapmaker U1 (0.4 nozzle);0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle);0.24 Draft Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.24", "from": "system", "setting_id": "MYRo7jTenu7F0Zv4", @@ -12,7 +13,16 @@ "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "54", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -23,5 +33,65 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom" + "gap_fill_target": "topbottom", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "230", + "600", + "230", + "600", + "230", + "600", + "230", + "600" + ], + "inner_wall_speed": [ + "230", + "600", + "230", + "600", + "230", + "600", + "230", + "600" + ], + "sparse_infill_speed": [ + "230", + "600", + "230", + "600", + "230", + "600", + "230", + "600" + ], + "outer_wall_speed": [ + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json index 2fa2eeabdb..d5f4513a58 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.24 Standard @Snapmaker U1 (0.6 nozzle)", + "renamed_from": "0.24 Standard Snapmaker U1 (0.6 nozzle);0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.24 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.24_nozzle_0.6", "from": "system", "setting_id": "BziJYuA5U5gWm6FM", @@ -12,7 +13,16 @@ ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", + "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "55", @@ -23,8 +33,77 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json index 316bb0dbee..1865821910 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.24 Standard @Snapmaker U1 (0.8 nozzle)", + "renamed_from": "0.24 Standard Snapmaker U1 (0.8 nozzle);0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.24 Standard Snapmaker U1 (0.8 High Flow nozzle)", "inherits": "fdm_process_U1_0.24_nozzle_0.8", "from": "system", "setting_id": "QcJ5p9h0eYUb91ak", @@ -12,7 +13,16 @@ ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", + "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], "min_width_top_surface": "90", "prime_tower_brim_width": "5", "prime_tower_width": "30", @@ -24,7 +34,76 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json index 2dcf03d540..0b012c715a 100644 --- a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.25 Benchy @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.25 Benchy Snapmaker U1 (0.4 nozzle);0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle);0.25 Benchy Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1", "from": "system", "setting_id": "deA4Xg6QxFTKOYZy", @@ -11,19 +12,127 @@ "elefant_foot_compensation": "0.15", "top_shell_layers": "3", "top_shell_thickness": "0.5", - "initial_layer_speed": "100", - "initial_layer_infill_speed": "180", - "outer_wall_speed": "180", - "inner_wall_speed": "200", - "sparse_infill_speed": "200", - "internal_solid_infill_speed": "200", - "top_surface_speed": "180", - "gap_infill_speed": "200", + "initial_layer_speed": [ + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100" + ], + "initial_layer_infill_speed": [ + "180", + "180", + "180", + "180", + "180", + "180", + "180", + "180" + ], + "outer_wall_speed": [ + "180", + "500", + "180", + "500", + "180", + "500", + "180", + "500" + ], + "inner_wall_speed": [ + "200", + "600", + "200", + "600", + "200", + "600", + "200", + "600" + ], + "sparse_infill_speed": [ + "200", + "600", + "200", + "600", + "200", + "600", + "200", + "600" + ], + "internal_solid_infill_speed": [ + "200", + "600", + "200", + "600", + "200", + "600", + "200", + "600" + ], + "top_surface_speed": [ + "180", + "180", + "180", + "180", + "180", + "180", + "180", + "180" + ], + "gap_infill_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200" + ], "ironing_speed": "30", - "enable_overhang_speed": "0", - "overhang_1_4_speed": "180", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "10", + "enable_overhang_speed": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "overhang_1_4_speed": [ + "180", + "180", + "180", + "180", + "180", + "180", + "180", + "180" + ], + "overhang_2_4_speed": [ + "20", + "20", + "20", + "20", + "20", + "20", + "20", + "20" + ], + "overhang_3_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10", + "10", + "10" + ], "layer_height": "0.25", "initial_layer_print_height": "0.25", "detect_overhang_wall": "0", @@ -46,15 +155,134 @@ "sparse_infill_line_width": "0.5", "top_surface_line_width": "0.5", "bottom_shell_layers": "2", - "initial_layer_travel_speed": "100%", - "bridge_acceleration": "3000", - "bridge_speed": "100", - "default_acceleration": "3000", - "inner_wall_acceleration": "3000", - "internal_solid_infill_acceleration": "3000", - "outer_wall_acceleration": "1600", - "small_perimeter_speed": "200", - "sparse_infill_acceleration": "3000", - "top_surface_acceleration": "3000", - "initial_layer_acceleration": "1600" + "initial_layer_travel_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "bridge_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000" + ], + "bridge_speed": [ + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100" + ], + "default_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000" + ], + "inner_wall_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000" + ], + "internal_solid_infill_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000" + ], + "outer_wall_acceleration": [ + "1600", + "1600", + "1600", + "1600", + "1600", + "1600", + "1600", + "1600" + ], + "small_perimeter_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200" + ], + "sparse_infill_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000" + ], + "top_surface_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000" + ], + "initial_layer_acceleration": [ + "1600", + "1600", + "1600", + "1600", + "1600", + "1600", + "1600", + "1600" + ], + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ] } diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json index 8829efafdb..a963be5571 100644 --- a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)", + "renamed_from": "0.28 Extra Draft Snapmaker U1 (0.4 nozzle);0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle);0.28 Extra Draft Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.28", "from": "system", "setting_id": "0fSeyAIS6z75A1r3", @@ -11,7 +12,16 @@ ], "prime_tower_width": "30", "prime_volume": "63", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "wipe_tower_filament": "0", "prime_tower_brim_width": "5", "wipe_tower_cone_angle": "15", @@ -23,5 +33,65 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom" + "gap_fill_target": "topbottom", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "200", + "600", + "200", + "600", + "200", + "600", + "200", + "600" + ], + "inner_wall_speed": [ + "200", + "600", + "200", + "600", + "200", + "600", + "200", + "600" + ], + "sparse_infill_speed": [ + "200", + "600", + "200", + "600", + "200", + "600", + "200", + "600" + ], + "outer_wall_speed": [ + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json index defbc6740b..b664e2b447 100644 --- a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.30 Draft @Snapmaker U1 (0.6 nozzle)", + "renamed_from": "0.30 Draft Snapmaker U1 (0.6 nozzle);0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle);0.30 Draft Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.6_common", "from": "system", "setting_id": "Tk3tG3RGJ8dwXFKf", @@ -13,7 +14,16 @@ "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "68", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", @@ -22,8 +32,64 @@ "initial_layer_print_height": "0.30", "top_shell_layers": "3", "bottom_shell_layers": "3", - "outer_wall_speed": "220", - "inner_wall_speed": "330", - "sparse_infill_speed": "300", - "internal_solid_infill_speed": "280" + "outer_wall_speed": [ + "220", + "500", + "220", + "500", + "220", + "500", + "220", + "500" + ], + "inner_wall_speed": [ + "330", + "600", + "330", + "600", + "330", + "600", + "330", + "600" + ], + "sparse_infill_speed": [ + "300", + "600", + "300", + "600", + "300", + "600", + "300", + "600" + ], + "internal_solid_infill_speed": [ + "280", + "600", + "280", + "600", + "280", + "600", + "280", + "600" + ], + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ] } diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json index 92bebf6219..4cc91537ee 100644 --- a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)", + "renamed_from": "0.30 Standard Snapmaker U1 (0.6 nozzle);0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.30 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.30_nozzle_0.6", "from": "system", "setting_id": "TWxp6qgz1DJa8Ngo", @@ -12,7 +13,16 @@ ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", + "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "68", @@ -22,8 +32,77 @@ "wipe_tower_wall_type": "rib", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json index f268a92446..fe96840a26 100644 --- a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.30 Strength @Snapmaker U1 (0.6 nozzle)", + "renamed_from": "0.30 Strength Snapmaker U1 (0.6 nozzle);0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle);0.30 Strength Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.30_nozzle_0.6", "from": "system", "setting_id": "CBaL0vgwtgsd6Snj", @@ -14,7 +15,16 @@ ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", + "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], "prime_tower_width": "30", "prime_volume": "68", "seam_gap": "15%", @@ -24,8 +34,77 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "prime_tower_brim_width": "5", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_type": "tree(auto)", - "wipe_tower_extra_spacing": "120%" + "wipe_tower_extra_spacing": "120%", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json index de7559f827..4804264bba 100644 --- a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.32 Standard @Snapmaker U1 (0.8 nozzle)", + "renamed_from": "0.32 Standard Snapmaker U1 (0.8 nozzle);0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.32 Standard Snapmaker U1 (0.8 High Flow nozzle)", "inherits": "fdm_process_U1_0.32_nozzle_0.8", "from": "system", "setting_id": "iVRz2B0VBIBL1xVd", @@ -12,7 +13,16 @@ ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", + "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "72", @@ -25,8 +35,77 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json index 6dc9f26329..b8231f6dd1 100644 --- a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.36 Standard @Snapmaker U1 (0.6 nozzle)", + "renamed_from": "0.36 Standard Snapmaker U1 (0.6 nozzle);0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.36 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.36_nozzle_0.6", "from": "system", "setting_id": "C0PiCFd3P222knX9", @@ -12,7 +13,16 @@ ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", + "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "81", @@ -23,8 +33,77 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json index b18e30c210..4adde29f4b 100644 --- a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)", + "renamed_from": "0.40 Extra Draft Snapmaker U1 (0.6 nozzle);0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle);0.40 Extra Draft Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.6_common", "from": "system", "setting_id": "rAUffOThYmj9FVTw", @@ -13,7 +14,16 @@ "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "90", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", @@ -22,9 +32,65 @@ "initial_layer_print_height": "0.35", "top_shell_layers": "3", "bottom_shell_layers": "3", - "outer_wall_speed": "220", - "inner_wall_speed": "330", - "sparse_infill_speed": "320", - "internal_solid_infill_speed": "300", - "wall_loops": "2" + "outer_wall_speed": [ + "220", + "500", + "220", + "500", + "220", + "500", + "220", + "500" + ], + "inner_wall_speed": [ + "330", + "600", + "330", + "600", + "330", + "600", + "330", + "600" + ], + "sparse_infill_speed": [ + "320", + "600", + "320", + "600", + "320", + "600", + "320", + "600" + ], + "internal_solid_infill_speed": [ + "300", + "600", + "300", + "600", + "300", + "600", + "300", + "600" + ], + "wall_loops": "2", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ] } diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json index b0cf935465..685c2395dc 100644 --- a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", + "renamed_from": "0.40 Standard Snapmaker U1 (0.8 nozzle);0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.40 Standard Snapmaker U1 (0.8 High Flow nozzle)", "inherits": "fdm_process_U1_0.40_nozzle_0.8", "from": "system", "setting_id": "VqkPgUtZi159BKpJ", @@ -12,7 +13,16 @@ ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", + "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "90", @@ -26,8 +36,77 @@ "min_width_top_surface": "200%", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_threshold_angle": "40", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json index eaa04faadc..3c6d1e38f5 100644 --- a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.42 Standard @Snapmaker U1 (0.6 nozzle)", + "renamed_from": "0.42 Standard Snapmaker U1 (0.6 nozzle);0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.42 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.42_nozzle_0.6", "from": "system", "setting_id": "SVJzhQA3KQetRZmo", @@ -12,7 +13,16 @@ ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", + "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], "precise_z_height": "0", "prime_tower_brim_width": "5", "prime_tower_width": "30", @@ -23,8 +33,77 @@ "wipe_tower_wall_type": "rib", "enable_arc_fitting": "0", "ooze_prevention": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json index 599cf24db5..2447cad6c9 100644 --- a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.48 Standard @Snapmaker U1 (0.8 nozzle)", + "renamed_from": "0.48 Standard Snapmaker U1 (0.8 nozzle);0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.48 Standard Snapmaker U1 (0.8 High Flow nozzle)", "inherits": "fdm_process_U1_0.48_nozzle_0.8", "from": "system", "setting_id": "5H6JWChFEo3zqoHQ", @@ -12,7 +13,16 @@ ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", + "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "108", @@ -23,8 +33,77 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] } diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json index ca728fe66a..aea4a4b78c 100644 --- a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.56 Standard @Snapmaker U1 (0.8 nozzle)", + "renamed_from": "0.56 Standard Snapmaker U1 (0.8 nozzle);0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.56 Standard Snapmaker U1 (0.8 High Flow nozzle)", "inherits": "fdm_process_U1_0.56_nozzle_0.8", "from": "system", "setting_id": "JZEIXOUT33c7MrZj", @@ -22,8 +23,77 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": "0", + "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)" + "support_type": "tree(auto)", + "print_extruder_id": [ + "1", + "1", + "2", + "2", + "3", + "3", + "4", + "4" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "internal_solid_infill_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "inner_wall_speed": [ + "150", + "600", + "150", + "600", + "150", + "600", + "150", + "600" + ], + "sparse_infill_speed": [ + "100", + "600", + "100", + "600", + "100", + "600", + "100", + "600" + ], + "outer_wall_speed": [ + "120", + "500", + "120", + "500", + "120", + "500", + "120", + "500" + ] }