diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json b/resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json
new file mode 100644
index 0000000000..28368c95f8
--- /dev/null
+++ b/resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json	
@@ -0,0 +1,54 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99_1",
+    "setting_id": "GFSA04",
+    "name": "Prusa Generic PETG @XL",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pet",
+    "nozzle_temperature_intial_layer": "230",
+    "nozzle_temperature": "240",
+    "full_fan_speed_layer": "5",
+    "slow_down_min_speed": "15",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "9"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "overhang_fan_speed": [
+        "50"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "filament_loading_speed_start": "50",
+    "filament_loading_speed": "10",
+    "filament_unloading_speed_start": "100",
+    "filament_unloading_speed": "100",
+    "filament_load_time": "10.5",
+    "filament_unload_time": "8.5",
+    "filament_cooling_moves": "3",
+    "filament_cooling_initial_speed": "5",
+    "filament_cooling_final_speed": "2.5",
+    "total_ramming_time": "1.25",
+    "total_rammed_volume": "52",
+    "ramming_line_width": "250%",
+    "ramming_line_spacing": "100%",
+    "filament_retract_lift_below": "1.5",
+    "filament_wipe": "1",
+    "filament_retract_before_wipe": "20%",
+    "filament_start_gcode": "M900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp",
+    "compatible_printers": [
+      "Prusa XL 0.4 nozzle"
+    ]
+}