juli/OrcaSlicer
1
1 Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-10-20 22:18:30 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'main' into perf/slicing-optimizations

Browse Source
This commit is contained in:
Rodrigo Faselli authored and GitHub committed 2026-10-04 13:26:02 -03:00
2 parents b6140110f2 73a4ff9b16
commit 7de1dc1548
611 files changed
+2310022 -2302935
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

src/libslic3r/PrintObject.cpp
+11 -5
View File
@@ -1027,10 +1027,13 @@ void PrintObject::generate_support_material()
void PrintObject::estimate_curled_extrusions()
{
if (this->set_started(posEstimateCurledExtrusions)) {
if ( std::any_of(this->print()->m_print_regions.begin(), this->print()->m_print_regions.end(), [](const PrintRegion* region) {
const auto& cfg = region->config().enable_overhang_speed.values;
return std::any_of(cfg.begin(), cfg.end(), [](const unsigned char v) { return (bool) v; });
})) {
const auto any_region_enables = [this](ConfigOptionBoolsNullable PrintRegionConfig::*option) {
return std::any_of(this->print()->m_print_regions.begin(), this->print()->m_print_regions.end(),
[option](const PrintRegion* region) { return any_enabled(region->config().*option); });
};
// Only the slowdown for curled perimeters reads the curled lines, and they stay empty unless some region has overhang speed on.
if (any_region_enables(&PrintRegionConfig::enable_overhang_speed) &&
any_region_enables(&PrintRegionConfig::slowdown_for_curled_perimeters)) {
// Estimate curling of support material and add it to the malformaition lines of each layer
float support_flow_width = support_material_flow(this, this->config().layer_height).width();
@@ -1040,6 +1043,9 @@ void PrintObject::estimate_curled_extrusions()
float(this->config().brim_width.getFloat())};
SupportSpotsGenerator::estimate_malformations(this->layers(), params);
m_print->throw_if_canceled();
} else {
for (Layer *layer : m_layers)
layer->curled_lines.clear();
}
//this->set_done(posEstimateCurledExtrusions);
}
@@ -3706,7 +3712,7 @@ void PrintObject::bridge_over_infill()
// Orca: Keep fine details for better anchoring
// bridging_area = opening(bridging_area, flow.scaled_spacing());
bridging_area = opening(bridging_area, flow.scaled_spacing() * 0.75);
bridging_area = opening(bridging_area, flow.scaled_spacing() * 0.75f);
bridging_area = closing(bridging_area, flow.scaled_spacing());
// Orca: Opening/closing can pull rounded bridge ends away from their real
// supports. Restore those contacts after smoothing, preserving the cleaned