Make all vendor profiles pass the updated profile checks

resources/profiles/Afinia/filament/Afinia ABS+@HS.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-	"filament_id": "OFLfywkp",
-	"setting_id": "wAJTMxtCY7EoavRi",
 	"name": "Afinia ABS+@HS",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "wAJTMxtCY7EoavRi",
+	"filament_id": "OFLfywkp",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Afinia/filament/Afinia ABS@HS.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-	"filament_id": "OFV5wEMe",
-	"setting_id": "qCDnb2iBaz4hd4vX",
 	"name": "Afinia ABS@HS",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "qCDnb2iBaz4hd4vX",
+	"filament_id": "OFV5wEMe",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Afinia/filament/Afinia PLA@HS.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-	"filament_id": "OF9HCdyQ",
-	"setting_id": "N3sCgjdjvp6FTtw9",
 	"name": "Afinia PLA@HS",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "N3sCgjdjvp6FTtw9",
+	"filament_id": "OF9HCdyQ",
+	"instantiation": "true",
 	"filament_cost": [
 		"24.99"
 	],

resources/profiles/Afinia/filament/Afinia Value ABS@HS.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-	"filament_id": "OFXi59OX",
-	"setting_id": "OxIiEYjbhEvSykaQ",
 	"name": "Afinia Value ABS@HS",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "OxIiEYjbhEvSykaQ",
+	"filament_id": "OFXi59OX",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Afinia/filament/Afinia Value PLA@HS.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-	"filament_id": "OFgHh8ly",
-	"setting_id": "BASsUdyvElEVJ9AA",
 	"name": "Afinia Value PLA@HS",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "BASsUdyvElEVJ9AA",
+	"filament_id": "OFgHh8ly",
+	"instantiation": "true",
 	"filament_cost": [
 		"24.99"
 	],

resources/profiles/Afinia/machine/Afinia H+1(HS) 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
-	"setting_id": "iwkXfmEyz9RLZTvh",
 	"name": "Afinia H+1(HS) 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_afinia_common",
+	"from": "system",
+	"setting_id": "iwkXfmEyz9RLZTvh",
+	"instantiation": "true",
 	"printer_model": "Afinia H+1(HS)",
 	"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
 	"nozzle_diameter": [

resources/profiles/Afinia/machine/Afinia H+1(HS) 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
-	"setting_id": "vngsrxKvEIsmr8tQ",
 	"name": "Afinia H+1(HS) 0.6 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "Afinia H+1(HS) 0.4 nozzle",
+	"from": "system",
+	"setting_id": "vngsrxKvEIsmr8tQ",
+	"instantiation": "true",
 	"printer_model": "Afinia H+1(HS)",
 	"default_print_profile": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
 	"nozzle_diameter": [

resources/profiles/Afinia/process/0.12mm Fine @Afinia H+1(HS).json

@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "FueWYijuvLNWzNmL",
 	"name": "0.12mm Fine @Afinia H+1(HS)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_afinia_HS_common",
+	"from": "system",
+	"setting_id": "FueWYijuvLNWzNmL",
+	"instantiation": "true",
 	"layer_height": "0.12",
 	"bottom_shell_layers": "5",
 	"elefant_foot_compensation": "0.15",

resources/profiles/Afinia/process/0.16mm Optimal @Afinia H+1(HS).json

@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "Ntf0ZMcETTPz7EY1",
 	"name": "0.16mm Optimal @Afinia H+1(HS)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_afinia_HS_common",
+	"from": "system",
+	"setting_id": "Ntf0ZMcETTPz7EY1",
+	"instantiation": "true",
 	"layer_height": "0.16",
 	"elefant_foot_compensation": "0.15",
 	"bottom_shell_layers": "4",

resources/profiles/Afinia/process/0.20mm Standard @Afinia H+1(HS).json

@@ -1,9 +1,9 @@
 {
 	"type": "process",
-	"setting_id": "Lxid5Z2e0fvVDMMm",
 	"name": "0.20mm Standard @Afinia H+1(HS)",
-	"from": "system",
 	"inherits": "fdm_process_afinia_HS_common",
+	"from": "system",
+	"setting_id": "Lxid5Z2e0fvVDMMm",
 	"instantiation": "true",
 	"elefant_foot_compensation": "0.15",
 	"top_shell_thickness": "1.0",

resources/profiles/Afinia/process/0.24mm Draft @Afinia H+1(HS).json

@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "APeSqnRZh6I9OTFr",
 	"name": "0.24mm Draft @Afinia H+1(HS)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_afinia_HS_common",
+	"from": "system",
+	"setting_id": "APeSqnRZh6I9OTFr",
+	"instantiation": "true",
 	"layer_height": "0.24",
 	"elefant_foot_compensation": "0.15",
 	"top_surface_line_width": "0.45",

resources/profiles/Afinia/process/0.28mm Extra Draft @Afinia H+1(HS).json

@@ -1,10 +1,10 @@
 {
 	"type": "process",
-	"setting_id": "VZ3NOVzdVWqZ37Ge",
 	"name": "0.28mm Extra Draft @Afinia H+1(HS)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_process_afinia_HS_common",
+	"from": "system",
+	"setting_id": "VZ3NOVzdVWqZ37Ge",
+	"instantiation": "true",
 	"layer_height": "0.28",
 	"elefant_foot_compensation": "0.15",
 	"top_surface_line_width": "0.45",

resources/profiles/Anker/filament/Generic ABS @Anker 0.2 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ABS @Anker 0.2 nozzle",
-	"inherits": "Generic ABS @Anker base",
 	"renamed_from": "Anker Generic ABS 0.2 nozzle",
+	"inherits": "Generic ABS @Anker base",
 	"from": "system",
 	"setting_id": "iOCt7x95XbWYMe5q",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic ABS @Anker 0.25 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ABS @Anker 0.25 nozzle",
-	"inherits": "Generic ABS @Anker base",
 	"renamed_from": "Anker Generic ABS 0.25 nozzle",
+	"inherits": "Generic ABS @Anker base",
 	"from": "system",
 	"setting_id": "7Q2pr70SpSjK7v7Y",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic ABS @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ABS @Anker",
-	"inherits": "Generic ABS @Anker base",
 	"renamed_from": "Anker Generic ABS",
+	"inherits": "Generic ABS @Anker base",
 	"from": "system",
 	"setting_id": "x3IBYtgKBx6Mszzk",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic ASA @Anker 0.2 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ASA @Anker 0.2 nozzle",
-	"inherits": "Generic ASA @Anker base",
 	"renamed_from": "Anker Generic ASA 0.2 nozzle",
+	"inherits": "Generic ASA @Anker base",
 	"from": "system",
 	"setting_id": "lTR8QLbuttyVs5UW",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic ASA @Anker 0.25 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ASA @Anker 0.25 nozzle",
-	"inherits": "Generic ASA @Anker base",
 	"renamed_from": "Anker Generic ASA 0.25 nozzle",
+	"inherits": "Generic ASA @Anker base",
 	"from": "system",
 	"setting_id": "FU4BiMydEyo7zxq5",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic ASA @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ASA @Anker",
-	"inherits": "Generic ASA @Anker base",
 	"renamed_from": "Anker Generic ASA",
+	"inherits": "Generic ASA @Anker base",
 	"from": "system",
 	"setting_id": "aDADuxiEKt2dVKOJ",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PA @Anker 0.2 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PA @Anker 0.2 nozzle",
-	"inherits": "Generic PA @Anker base",
 	"renamed_from": "Anker Generic PA 0.2 nozzle",
+	"inherits": "Generic PA @Anker base",
 	"from": "system",
 	"setting_id": "tYAT7xnNFD6gY84A",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PA @Anker 0.25 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PA @Anker 0.25 nozzle",
-	"inherits": "Generic PA @Anker base",
 	"renamed_from": "Anker Generic PA 0.25 nozzle",
+	"inherits": "Generic PA @Anker base",
 	"from": "system",
 	"setting_id": "Zlv65wLA94PbevRG",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PA @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PA @Anker",
-	"inherits": "Generic PA @Anker base",
 	"renamed_from": "Anker Generic PA",
+	"inherits": "Generic PA @Anker base",
 	"from": "system",
 	"setting_id": "sLWVtBxpAC53eUwo",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PA-CF @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PA-CF @Anker",
-	"inherits": "Generic PA-CF @Anker base",
 	"renamed_from": "Anker Generic PA-CF",
+	"inherits": "Generic PA-CF @Anker base",
 	"from": "system",
 	"setting_id": "K4LcpR0zBp5klSpb",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PC @Anker 0.2 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PC @Anker 0.2 nozzle",
-	"inherits": "Generic PC @Anker base",
 	"renamed_from": "Anker Generic PC 0.2 nozzle",
+	"inherits": "Generic PC @Anker base",
 	"from": "system",
 	"setting_id": "2sSOgctcnVh9bGbQ",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PC @Anker 0.25 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PC @Anker 0.25 nozzle",
-	"inherits": "Generic PC @Anker base",
 	"renamed_from": "Anker Generic PC 0.25 nozzle",
+	"inherits": "Generic PC @Anker base",
 	"from": "system",
 	"setting_id": "h7IRuq5uekjNw4vg",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PC @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PC @Anker",
-	"inherits": "Generic PC @Anker base",
 	"renamed_from": "Anker Generic PC",
+	"inherits": "Generic PC @Anker base",
 	"from": "system",
 	"setting_id": "ffufXVvW95sunH1B",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PETG @Anker 0.2 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG @Anker 0.2 nozzle",
-	"inherits": "Generic PETG @Anker base",
 	"renamed_from": "Anker Generic PETG 0.2 nozzle",
+	"inherits": "Generic PETG @Anker base",
 	"from": "system",
 	"setting_id": "67ZHuiXPyCP6Tdtr",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PETG @Anker 0.25 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG @Anker 0.25 nozzle",
-	"inherits": "Generic PETG @Anker base",
 	"renamed_from": "Anker Generic PETG 0.25 nozzle",
+	"inherits": "Generic PETG @Anker base",
 	"from": "system",
 	"setting_id": "aLuRALDt0Otbd2So",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PETG @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG @Anker",
-	"inherits": "Generic PETG @Anker base",
 	"renamed_from": "Anker Generic PETG",
+	"inherits": "Generic PETG @Anker base",
 	"from": "system",
 	"setting_id": "hvV0rmnzRHJk9sMz",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PETG-CF @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG-CF @Anker",
-	"inherits": "Generic PETG-CF @Anker base",
 	"renamed_from": "Anker Generic PETG-CF",
+	"inherits": "Generic PETG-CF @Anker base",
 	"from": "system",
 	"setting_id": "vCAuQeQLoXUk28ph",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PLA @Anker 0.2 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @Anker 0.2 nozzle",
-	"inherits": "Generic PLA @Anker base",
 	"renamed_from": "Anker Generic PLA 0.2 nozzle",
+	"inherits": "Generic PLA @Anker base",
 	"from": "system",
 	"setting_id": "rCvmCzPgi4KA6nmI",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PLA @Anker 0.25 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @Anker 0.25 nozzle",
-	"inherits": "Generic PLA @Anker base",
 	"renamed_from": "Anker Generic PLA 0.25 nozzle",
+	"inherits": "Generic PLA @Anker base",
 	"from": "system",
 	"setting_id": "C0hNEbEueKrcYojS",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PLA @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @Anker",
-	"inherits": "Generic PLA @Anker base",
 	"renamed_from": "Anker Generic PLA",
+	"inherits": "Generic PLA @Anker base",
 	"from": "system",
 	"setting_id": "GfVhcxRmt6mHSemI",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PLA Silk @Anker 0.2 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA Silk @Anker 0.2 nozzle",
-	"inherits": "Generic PLA Silk @Anker base",
 	"renamed_from": "Anker Generic PLA Silk 0.2 nozzle",
+	"inherits": "Generic PLA Silk @Anker base",
 	"from": "system",
 	"setting_id": "NWGiPWYmLVktDMJt",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PLA Silk @Anker 0.25 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA Silk @Anker 0.25 nozzle",
-	"inherits": "Generic PLA Silk @Anker base",
 	"renamed_from": "Anker Generic PLA Silk 0.25 nozzle",
+	"inherits": "Generic PLA Silk @Anker base",
 	"from": "system",
 	"setting_id": "4thKBCnYgDtnAtF5",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PLA Silk @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA Silk @Anker",
-	"inherits": "Generic PLA Silk @Anker base",
 	"renamed_from": "Anker Generic PLA Silk",
+	"inherits": "Generic PLA Silk @Anker base",
 	"from": "system",
 	"setting_id": "URRIeNXIiIPjxbKL",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PLA+ @Anker 0.2 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA+ @Anker 0.2 nozzle",
-	"inherits": "Generic PLA+ @Anker base",
 	"renamed_from": "Anker Generic PLA+ 0.2 nozzle",
+	"inherits": "Generic PLA+ @Anker base",
 	"from": "system",
 	"setting_id": "5m3xLxdReqLlE2Jp",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PLA+ @Anker 0.25 nozzle.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA+ @Anker 0.25 nozzle",
-	"inherits": "Generic PLA+ @Anker base",
 	"renamed_from": "Anker Generic PLA+ 0.25 nozzle",
+	"inherits": "Generic PLA+ @Anker base",
 	"from": "system",
 	"setting_id": "wwkWVDsg6SoeCS0F",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PLA+ @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA+ @Anker",
-	"inherits": "Generic PLA+ @Anker base",
 	"renamed_from": "Anker Generic PLA+",
+	"inherits": "Generic PLA+ @Anker base",
 	"from": "system",
 	"setting_id": "MDb4CH02FxbgPNjS",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PLA-CF @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA-CF @Anker",
-	"inherits": "Generic PLA-CF @Anker base",
 	"renamed_from": "Anker Generic PLA-CF",
+	"inherits": "Generic PLA-CF @Anker base",
 	"from": "system",
 	"setting_id": "5AdjHUxRi8LCU4E9",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic PVA @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PVA @Anker",
-	"inherits": "Generic PVA @Anker base",
 	"renamed_from": "Anker Generic PVA",
+	"inherits": "Generic PVA @Anker base",
 	"from": "system",
 	"setting_id": "HXERDaP3AgzWtmiu",
 	"instantiation": "true",

resources/profiles/Anker/filament/Generic TPU @Anker.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic TPU @Anker",
-	"inherits": "Generic TPU @Anker base",
 	"renamed_from": "Anker Generic TPU",
+	"inherits": "Generic TPU @Anker base",
 	"from": "system",
 	"setting_id": "5YigkBBSP2RM1MbK",
 	"instantiation": "true",

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
 	"name": "Anycubic",
-	"version": "02.04.00.07",
+	"version": "02.04.00.08",
 	"force_update": "0",
 	"description": "Anycubic configurations",
 	"machine_model_list": [

resources/profiles/Anycubic/filament/Generic ABS @Anycubic.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ABS @Anycubic",
-	"inherits": "fdm_filament_abs",
 	"renamed_from": "Anycubic Generic ABS",
+	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "jKvjWU6rcHvWblWC",
 	"filament_id": "OFY9muEs",

resources/profiles/Anycubic/filament/Generic ASA @Anycubic.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic ASA @Anycubic",
-	"inherits": "fdm_filament_asa",
 	"renamed_from": "Anycubic Generic ASA",
+	"inherits": "fdm_filament_asa",
 	"from": "system",
 	"setting_id": "o2Cr8cBtE4OKsTqm",
 	"filament_id": "OFLPAxz3",

resources/profiles/Anycubic/filament/Generic PA @Anycubic.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PA @Anycubic",
-	"inherits": "fdm_filament_pa",
 	"renamed_from": "Anycubic Generic PA",
+	"inherits": "fdm_filament_pa",
 	"from": "system",
 	"setting_id": "5MJsYpJIimshIDZm",
 	"filament_id": "OFg8ndtj",

resources/profiles/Anycubic/filament/Generic PA-CF @Anycubic.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PA-CF @Anycubic",
-	"inherits": "fdm_filament_pa",
 	"renamed_from": "Anycubic Generic PA-CF",
+	"inherits": "fdm_filament_pa",
 	"from": "system",
 	"setting_id": "j1uioy0lCnm4AKrm",
 	"filament_id": "OFQLcbps",

resources/profiles/Anycubic/filament/Generic PC @Anycubic.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PC @Anycubic",
-	"inherits": "fdm_filament_pc",
 	"renamed_from": "Anycubic Generic PC",
+	"inherits": "fdm_filament_pc",
 	"from": "system",
 	"setting_id": "3jP8aWkWw2dT2fNM",
 	"filament_id": "OFLakOUI",

resources/profiles/Anycubic/filament/Generic PETG @Anycubic.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PETG @Anycubic",
-	"inherits": "fdm_filament_pet",
 	"renamed_from": "Anycubic Generic PETG",
+	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "ddafY4oOvEc6L6Ej",
 	"filament_id": "OFYPdQJh",

resources/profiles/Anycubic/filament/Generic PLA @Anycubic.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA @Anycubic",
-	"inherits": "fdm_filament_pla",
 	"renamed_from": "Anycubic Generic PLA",
+	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "qoYfeBQCSt15O9ye",
 	"filament_id": "OFDSrzZ8",

resources/profiles/Anycubic/filament/Generic PLA-CF @Anycubic.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PLA-CF @Anycubic",
-	"inherits": "fdm_filament_pla",
 	"renamed_from": "Anycubic Generic PLA-CF",
+	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "mLENUT39vBcQiLpm",
 	"filament_id": "OFWbdGsC",

resources/profiles/Anycubic/filament/Generic PVA @Anycubic.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic PVA @Anycubic",
-	"inherits": "fdm_filament_pva",
 	"renamed_from": "Anycubic Generic PVA",
+	"inherits": "fdm_filament_pva",
 	"from": "system",
 	"setting_id": "ae5ljmDsW7uauLz8",
 	"filament_id": "OFDvXujf",

resources/profiles/Anycubic/filament/Generic TPU @Anycubic.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
 	"name": "Generic TPU @Anycubic",
-	"inherits": "fdm_filament_tpu",
 	"renamed_from": "Anycubic Generic TPU",
+	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "z0FSikhD8ZHv2UYt",
 	"filament_id": "OFgbpcy9",

resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -104,79 +104,64 @@
 	"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X420 Y420 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
 	"machine_load_filament_time": "75",
 	"machine_max_acceleration_e": [
-		"10000",
 		"10000",
 		"10000"
 	],
 	"machine_max_acceleration_extruding": [
-		"10000",
 		"10000",
 		"10000"
 	],
 	"machine_max_acceleration_retracting": [
-		"10000",
 		"10000",
 		"10000"
 	],
 	"machine_max_acceleration_travel": [
-		"10000",
 		"10000",
 		"10000"
 	],
 	"machine_max_acceleration_x": [
-		"10000",
 		"10000",
 		"10000"
 	],
 	"machine_max_acceleration_y": [
-		"10000",
 		"10000",
 		"10000"
 	],
 	"machine_max_acceleration_z": [
-		"3000",
 		"3000",
 		"3000"
 	],
 	"machine_max_jerk_e": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_x": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_y": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_z": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_speed_e": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_x": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_y": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_z": [
 		"20",
-		"10",
+		"10"
-		"26"
 	],
 	"machine_min_extruding_rate": [
 		"0",

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -77,79 +77,64 @@
 	"machine_end_gcode": "G92 E0\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
 	"machine_load_filament_time": "42",
 	"machine_max_acceleration_e": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_extruding": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_retracting": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_travel": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_x": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_y": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_z": [
-		"1000",
 		"1000",
 		"1000"
 	],
 	"machine_max_jerk_e": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_x": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_y": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_z": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_speed_e": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_x": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_y": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_z": [
 		"15",
-		"10",
+		"10"
-		"26"
 	],
 	"machine_min_extruding_rate": [
 		"0",

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -73,79 +73,64 @@
 	"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
 	"machine_load_filament_time": "42",
 	"machine_max_acceleration_e": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_extruding": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_retracting": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_travel": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_x": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_y": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_z": [
-		"1000",
 		"1000",
 		"1000"
 	],
 	"machine_max_jerk_e": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_x": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_y": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_z": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_speed_e": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_x": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_y": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_z": [
 		"15",
-		"10",
+		"10"
-		"26"
 	],
 	"machine_min_extruding_rate": [
 		"0",

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -73,79 +73,64 @@
 	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-1 F3600 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
 	"machine_load_filament_time": "42",
 	"machine_max_acceleration_e": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_extruding": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_retracting": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_travel": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_x": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_y": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_z": [
-		"1000",
 		"1000",
 		"1000"
 	],
 	"machine_max_jerk_e": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_x": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_y": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_z": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_speed_e": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_x": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_y": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_z": [
 		"15",
-		"10",
+		"10"
-		"26"
 	],
 	"machine_min_extruding_rate": [
 		"0",

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -77,79 +77,64 @@
 	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-2 F3000 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
 	"machine_load_filament_time": "42",
 	"machine_max_acceleration_e": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_extruding": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_retracting": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_travel": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_x": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_y": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_z": [
-		"1000",
 		"1000",
 		"1000"
 	],
 	"machine_max_jerk_e": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_x": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_y": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_jerk_z": [
-		"20",
 		"20",
 		"20"
 	],
 	"machine_max_speed_e": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_x": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_y": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_z": [
 		"15",
-		"10",
+		"10"
-		"26"
 	],
 	"machine_min_extruding_rate": [
 		"0",

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2.json

@@ -1,8 +1,8 @@
 {
 	"type": "machine_model",
+	"name": "Anycubic Kobra 3 V2",
 	"machine_tech": "FFF",
 	"family": "Anycubic",
-    "name": "Anycubic Kobra 3 V2",
 	"model_id": "Anycubic Kobra 3 V2",
 	"nozzle_diameter": "0.4;0.2;0.6;0.8",
 	"bed_model": "Anycubic Kobra 3 V2_buildplate_model.stl",

resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json

@@ -73,79 +73,64 @@
 	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
 	"machine_load_filament_time": "0",
 	"machine_max_acceleration_e": [
-		"5000",
 		"5000",
 		"5000"
 	],
 	"machine_max_acceleration_extruding": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_retracting": [
-		"5000",
 		"5000",
 		"5000"
 	],
 	"machine_max_acceleration_travel": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_x": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_y": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_z": [
-		"400",
 		"400",
 		"400"
 	],
 	"machine_max_jerk_e": [
-		"1",
 		"1",
 		"1"
 	],
 	"machine_max_jerk_x": [
-		"15",
 		"15",
 		"15"
 	],
 	"machine_max_jerk_y": [
-		"15",
 		"15",
 		"15"
 	],
 	"machine_max_jerk_z": [
-		"1",
 		"1",
 		"1"
 	],
 	"machine_max_speed_e": [
 		"80",
-		"40",
+		"40"
-		"104"
 	],
 	"machine_max_speed_x": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_y": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_z": [
 		"10",
-		"5",
+		"5"
-		"13"
 	],
 	"machine_min_extruding_rate": [
 		"0",

resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -73,79 +73,64 @@
 	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
 	"machine_load_filament_time": "0",
 	"machine_max_acceleration_e": [
-		"5000",
 		"5000",
 		"5000"
 	],
 	"machine_max_acceleration_extruding": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_retracting": [
-		"5000",
 		"5000",
 		"5000"
 	],
 	"machine_max_acceleration_travel": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_x": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_y": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_z": [
-		"400",
 		"400",
 		"400"
 	],
 	"machine_max_jerk_e": [
-		"1",
 		"1",
 		"1"
 	],
 	"machine_max_jerk_x": [
-		"15",
 		"15",
 		"15"
 	],
 	"machine_max_jerk_y": [
-		"15",
 		"15",
 		"15"
 	],
 	"machine_max_jerk_z": [
-		"1",
 		"1",
 		"1"
 	],
 	"machine_max_speed_e": [
 		"80",
-		"40",
+		"40"
-		"104"
 	],
 	"machine_max_speed_x": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_y": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_z": [
 		"10",
-		"5",
+		"5"
-		"13"
 	],
 	"machine_min_extruding_rate": [
 		"0",

resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -73,79 +73,64 @@
 	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
 	"machine_load_filament_time": "0",
 	"machine_max_acceleration_e": [
-		"5000",
 		"5000",
 		"5000"
 	],
 	"machine_max_acceleration_extruding": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_retracting": [
-		"5000",
 		"5000",
 		"5000"
 	],
 	"machine_max_acceleration_travel": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_x": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_y": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_z": [
-		"400",
 		"400",
 		"400"
 	],
 	"machine_max_jerk_e": [
-		"1",
 		"1",
 		"1"
 	],
 	"machine_max_jerk_x": [
-		"15",
 		"15",
 		"15"
 	],
 	"machine_max_jerk_y": [
-		"15",
 		"15",
 		"15"
 	],
 	"machine_max_jerk_z": [
-		"1",
 		"1",
 		"1"
 	],
 	"machine_max_speed_e": [
 		"80",
-		"40",
+		"40"
-		"104"
 	],
 	"machine_max_speed_x": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_y": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_z": [
 		"10",
-		"5",
+		"5"
-		"13"
 	],
 	"machine_min_extruding_rate": [
 		"0",

resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -73,79 +73,64 @@
 	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors                  \n; disable stepper motors",
 	"machine_load_filament_time": "0",
 	"machine_max_acceleration_e": [
-		"5000",
 		"5000",
 		"5000"
 	],
 	"machine_max_acceleration_extruding": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_retracting": [
-		"5000",
 		"5000",
 		"5000"
 	],
 	"machine_max_acceleration_travel": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_x": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_y": [
-		"20000",
 		"20000",
 		"20000"
 	],
 	"machine_max_acceleration_z": [
-		"400",
 		"400",
 		"400"
 	],
 	"machine_max_jerk_e": [
-		"1",
 		"1",
 		"1"
 	],
 	"machine_max_jerk_x": [
-		"15",
 		"15",
 		"15"
 	],
 	"machine_max_jerk_y": [
-		"15",
 		"15",
 		"15"
 	],
 	"machine_max_jerk_z": [
-		"1",
 		"1",
 		"1"
 	],
 	"machine_max_speed_e": [
 		"80",
-		"40",
+		"40"
-		"104"
 	],
 	"machine_max_speed_x": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_y": [
 		"600",
-		"300",
+		"300"
-		"780"
 	],
 	"machine_max_speed_z": [
 		"10",
-		"5",
+		"5"
-		"13"
 	],
 	"machine_min_extruding_rate": [
 		"0",

resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json

@@ -1,8 +1,8 @@
 {
 	"type": "machine_model",
+	"name": "Anycubic Kobra S1 Max",
 	"machine_tech": "FFF",
 	"family": "Anycubic",
-    "name": "Anycubic Kobra S1 Max",
 	"model_id": "Anycubic Kobra S1 Max",
 	"nozzle_diameter": "0.4;0.25;0.6;0.8",
 	"bed_model": "Anycubic Kobra S1 Max_buildplate_model.stl",

resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json

@@ -85,48 +85,63 @@
 	"machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
 	"machine_load_filament_time": "0",
 	"machine_max_acceleration_e": [
+		"6500",
 		"6500"
 	],
 	"machine_max_acceleration_extruding": [
+		"6500",
 		"6500"
 	],
 	"machine_max_acceleration_retracting": [
+		"6500",
 		"6500"
 	],
 	"machine_max_acceleration_travel": [
+		"10000",
 		"10000"
 	],
 	"machine_max_acceleration_x": [
+		"10000",
 		"10000"
 	],
 	"machine_max_acceleration_y": [
+		"10000",
 		"10000"
 	],
 	"machine_max_acceleration_z": [
+		"1000",
 		"1000"
 	],
 	"machine_max_jerk_e": [
+		"1",
 		"1"
 	],
 	"machine_max_jerk_x": [
+		"20",
 		"20"
 	],
 	"machine_max_jerk_y": [
+		"20",
 		"20"
 	],
 	"machine_max_jerk_z": [
+		"20",
 		"20"
 	],
 	"machine_max_speed_e": [
+		"250",
 		"250"
 	],
 	"machine_max_speed_x": [
+		"450",
 		"450"
 	],
 	"machine_max_speed_y": [
+		"450",
 		"450"
 	],
 	"machine_max_speed_z": [
+		"12",
 		"12"
 	],
 	"machine_min_extruding_rate": [

resources/profiles/Artillery/filament/Generic ABS @Artillery.json

@@ -1,12 +1,12 @@
 {
 	"type": "filament",
-	"filament_id": "OFY9muEs",
-	"setting_id": "DNgTEZpEz8bJoobJ",
 	"name": "Generic ABS @Artillery",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_abs",
 	"renamed_from": "Artillery Generic ABS",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "DNgTEZpEz8bJoobJ",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.926"
 	],

resources/profiles/Artillery/filament/Generic ASA @Artillery.json

@@ -1,12 +1,12 @@
 {
 	"type": "filament",
-	"filament_id": "OFLPAxz3",
-	"setting_id": "xWHuScm0fPJCqjVx",
 	"name": "Generic ASA @Artillery",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_asa",
 	"renamed_from": "Artillery Generic ASA",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "xWHuScm0fPJCqjVx",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.93"
 	],

resources/profiles/Artillery/filament/Generic PETG @Artillery.json

@@ -1,12 +1,12 @@
 {
 	"type": "filament",
-	"filament_id": "OFYPdQJh",
-	"setting_id": "6wZKfV2XvuJSUSwl",
 	"name": "Generic PETG @Artillery",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pet",
 	"renamed_from": "Artillery Generic PETG",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "6wZKfV2XvuJSUSwl",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"
 	],

resources/profiles/Artillery/filament/Generic PLA @Artillery.json

@@ -1,12 +1,12 @@
 {
 	"type": "filament",
-	"filament_id": "OFDSrzZ8",
-	"setting_id": "T0sW3uMBr94Y1X1G",
 	"name": "Generic PLA @Artillery",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
 	"renamed_from": "Artillery Generic PLA",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "T0sW3uMBr94Y1X1G",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"
 	],

resources/profiles/Artillery/filament/Generic PLA-CF @Artillery.json

@@ -1,12 +1,12 @@
 {
 	"type": "filament",
-	"filament_id": "OFWbdGsC",
-	"setting_id": "Gxafdb0zYnf9kPwa",
 	"name": "Generic PLA-CF @Artillery",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
 	"renamed_from": "Artillery Generic PLA-CF",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Gxafdb0zYnf9kPwa",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Artillery/filament/Generic TPU @Artillery.json

@@ -1,12 +1,12 @@
 {
 	"type": "filament",
-	"filament_id": "OFgbpcy9",
-	"setting_id": "dWhysRiE5GrAGyME",
 	"name": "Generic TPU @Artillery",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_tpu",
 	"renamed_from": "Artillery Generic TPU",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "dWhysRiE5GrAGyME",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"3.2"
 	],

resources/profiles/Artillery/filament/fdm_filament_abs.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
 	"name": "fdm_filament_abs",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_filament_common",
 	"cool_plate_temp": [
 		"105"
 	],

resources/profiles/Artillery/filament/fdm_filament_asa.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
 	"name": "fdm_filament_asa",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_filament_common",
 	"cool_plate_temp": [
 		"105"
 	],

resources/profiles/Artillery/filament/fdm_filament_pet.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
 	"name": "fdm_filament_pet",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_filament_common",
 	"cool_plate_temp": [
 		"60"
 	],

resources/profiles/Artillery/filament/fdm_filament_pla.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
 	"name": "fdm_filament_pla",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_filament_common",
 	"fan_cooling_layer_time": [
 		"100"
 	],

resources/profiles/Artillery/filament/fdm_filament_tpu.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
 	"name": "fdm_filament_tpu",
+	"inherits": "fdm_filament_common",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_filament_common",
 	"cool_plate_temp": [
 		"30"
 	],

resources/profiles/Artillery/machine/Artillery Genius 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
-	"setting_id": "F9lEQfH826Mqt6u3",
 	"name": "Artillery Genius 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "F9lEQfH826Mqt6u3",
+	"instantiation": "true",
 	"printer_model": "Artillery Genius",
 	"default_print_profile": "0.20mm Standard @Artillery Genius",
 	"nozzle_diameter": [

resources/profiles/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
-	"setting_id": "afpW4NvrOWzQvHbB",
 	"name": "Artillery Genius Pro 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "afpW4NvrOWzQvHbB",
+	"instantiation": "true",
 	"printer_model": "Artillery Genius Pro",
 	"default_print_profile": "0.20mm Standard @Artillery Genius Pro",
 	"nozzle_diameter": [

resources/profiles/Artillery/machine/Artillery Hornet 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
-	"setting_id": "02YSChoFQuBRQ8vf",
 	"name": "Artillery Hornet 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "02YSChoFQuBRQ8vf",
+	"instantiation": "true",
 	"printer_model": "Artillery Hornet",
 	"default_print_profile": "0.20mm Standard @Artillery Hornet",
 	"nozzle_diameter": [

resources/profiles/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
-	"setting_id": "nY4RXX9Ylh7AIc4U",
 	"name": "Artillery Sidewinder X1 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "nY4RXX9Ylh7AIc4U",
+	"instantiation": "true",
 	"printer_model": "Artillery Sidewinder X1",
 	"default_print_profile": "0.20mm Standard @Artillery X1",
 	"nozzle_diameter": [

resources/profiles/Artillery/machine/Artillery Sidewinder X2 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
-	"setting_id": "cUhse9TrF7ElM5dh",
 	"name": "Artillery Sidewinder X2 0.4 nozzle",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "cUhse9TrF7ElM5dh",
+	"instantiation": "true",
 	"printer_model": "Artillery Sidewinder X2",
 	"default_print_profile": "0.20mm Standard @Artillery X2",
 	"nozzle_diameter": [

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.08.00.10",
+	"version": "02.08.00.11",
 	"force_update": "0",
 	"description": "the initial version of BBL configurations",
 	"machine_model_list": [

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.2 nozzle.json

@@ -6,6 +6,7 @@
     "setting_id": "GFSB00_14",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.8 nozzle.json

@@ -6,6 +6,7 @@
     "setting_id": "GFSB00_15",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu ABS @BBL P2S.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSB00_10",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu ABS-GF @BBL P2S.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSB50_04",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.2 nozzle.json

@@ -6,6 +6,7 @@
     "setting_id": "GFSB01_15",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.4 nozzle.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSB01_16",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.6 nozzle.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSB01_14",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu ASA-Aero @BBL P2S.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSB02_04",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu ASA-CF @BBL P2S 0.4 nozzle.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSB51_08",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu ASA-CF @BBL P2S 0.6 nozzle.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSB51_09",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu PA-CF @BBL P2S.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSN03_03",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S 0.6 nozzle.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSN05_25",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S 0.8 nozzle.json

@@ -6,6 +6,7 @@
     "setting_id": "GFSN05_26",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSN05_05",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu PA6-GF @BBL P2S.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSN08_04",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S 0.6 nozzle.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSN04_27",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S 0.8 nozzle.json

@@ -6,6 +6,7 @@
     "setting_id": "GFSN04_28",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSN04_02",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [

resources/profiles/BBL/filament/Bambu PPA-CF @BBL P2S.json

@@ -6,6 +6,8 @@
     "setting_id": "GFSN06_03",
     "instantiation": "true",
     "activate_air_filtration": [
+        "0",
+        "0",
         "0"
     ],
     "chamber_temperatures": [