ENH: reduce 100% overhang wall speed to 10mm/s

The old speed 50mm/s is too high and cause some print quality problems.

Also change the display of overhang speeds to better adhere to the code.

jira: STUDIO-9641
Change-Id: I6efa981db5bf88a9cf5bb70abb443cdfa1783025
(cherry picked from commit 979fefffd528ab1fb4e670fd88f716a3aed2e6f2)

resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json

@@ -12,7 +12,6 @@
     "outer_wall_speed": "60",
     "sparse_infill_pattern": "gyroid",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json

@@ -6,7 +6,6 @@
     "setting_id": "GP001",
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
-    "overhang_totally_speed": "50",
     "smooth_coefficient": "150",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",

resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json

@@ -12,7 +12,6 @@
     "outer_wall_speed": "60",
     "sparse_infill_pattern": "gyroid",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json

@@ -16,7 +16,6 @@
     "sparse_infill_speed": "150",
     "top_surface_speed": "150",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json

@@ -12,7 +12,6 @@
     "outer_wall_speed": "60",
     "sparse_infill_pattern": "gyroid",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json

@@ -8,7 +8,6 @@
     "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json

@@ -16,7 +16,6 @@
     "sparse_infill_speed": "180",
     "top_surface_speed": "150",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json

@@ -16,7 +16,6 @@
     "sparse_infill_speed": "200",
     "top_surface_speed": "150",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle",

resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "outer_wall_speed": "60",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "sparse_infill_density": "25%",
     "wall_loops": "6",
     "compatible_printers": [

resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle",

resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.8 nozzle",

resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json

@@ -8,7 +8,6 @@
     "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab P1S 0.6 nozzle",

resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json

@@ -10,7 +10,6 @@
     "sparse_infill_density": "25%",
     "wall_loops": "4",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle",

resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.8 nozzle",

resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle",

resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json

@@ -8,7 +8,6 @@
     "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab P1S 0.8 nozzle",

resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle",

resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.8 nozzle",

resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
     "elefant_foot_compensation": "0.15",
     "smooth_coefficient": "150",
-    "overhang_totally_speed": "50",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.8 nozzle",

resources/profiles/BBL/process/fdm_process_common.json

@@ -48,7 +48,7 @@
     "only_one_wall_top": "1",
     "outer_wall_line_width": "0.42",
     "outer_wall_speed": "120",
-    "overhang_totally_speed": "19",
+    "overhang_totally_speed": "10",
     "prime_tower_width": "50",
     "print_sequence": "by layer",
     "print_settings_id": "",

resources/profiles/BBL/process/fdm_process_dual_common.json

@@ -20,7 +20,7 @@
     "overhang_2_4_speed": "50",
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
-    "overhang_totally_speed": "26",
+    "overhang_totally_speed": "10",
     "print_extruder_id": [
         "1",
         "1",