add new features to lang files (#7918)

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-12-01 08:07+0100\n"
+"POT-Creation-Date: 2025-01-04 17:35+0100\n"
 "PO-Revision-Date: 2024-07-07 18:43+0200\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -1298,9 +1298,6 @@ msgstr "Centre de l'aresta"
 msgid "Center of circle"
 msgstr "Centre del cercle"
 
-msgid "ShiftLeft mouse button"
-msgstr "Màj+Botó esquerre del ratolí"
-
 msgid "Select feature"
 msgstr "Seleccioneu una característica"
 
@@ -1316,18 +1313,25 @@ msgstr "Reinicia la selecció"
 msgid "Esc"
 msgstr "Esc"
 
-msgid "Unselect"
-msgstr "Desmarcar"
+msgid "Cancel a feature until exit"
+msgstr ""
 
 msgid "Measure"
 msgstr "Mesurar"
 
+msgid ""
+"Please confirm explosion ratio = 1,and please select at least one object"
+msgstr ""
+
+msgid "Please select at least one object."
+msgstr ""
+
 msgid "Edit to scale"
 msgstr "Editar a escala"
 
 msgctxt "Verb"
-msgid "Scale"
-msgstr "Escalar"
+msgid "Scale all"
+msgstr ""
 
 msgid "None"
 msgstr "Cap"
@@ -1341,6 +1345,42 @@ msgstr "Longitut"
 msgid "Selection"
 msgstr "Selecció"
 
+msgid " (Moving)"
+msgstr ""
+
+msgid ""
+"Select 2 faces on objects and \n"
+" make objects assemble together."
+msgstr ""
+
+msgid ""
+"Select 2 points or circles on objects and \n"
+" specify distance between them."
+msgstr ""
+
+msgid "Face"
+msgstr ""
+
+msgid " (Fixed)"
+msgstr ""
+
+msgid "Point"
+msgstr ""
+
+msgid ""
+"Feature 1 has been reset, \n"
+"feature 2 has been feature 1"
+msgstr ""
+
+msgid "Warning:please select Plane's feature."
+msgstr ""
+
+msgid "Warning:please select Point's or Circle's feature."
+msgstr ""
+
+msgid "Warning:please select two different mesh."
+msgstr ""
+
 msgid "Copy to clipboard"
 msgstr "Copiar al porta-retalls"
 
@@ -1356,6 +1396,27 @@ msgstr "Distància directa"
 msgid "Distance XYZ"
 msgstr "Distància XYZ"
 
+msgid "Parallel"
+msgstr ""
+
+msgid "Center coincidence"
+msgstr ""
+
+msgid "Featue 1"
+msgstr ""
+
+msgid "Reverse rotation"
+msgstr ""
+
+msgid "Rotate around center:"
+msgstr ""
+
+msgid "Parallel distance:"
+msgstr ""
+
+msgid "Flip by Face 2"
+msgstr ""
+
 msgid "Ctrl+"
 msgstr "Ctrl+"
 
@@ -2790,8 +2851,8 @@ msgstr ""
 msgid "About %s"
 msgstr "Sobre %s"
 
-msgid "Orca Slicer "
-msgstr "Orca Slicer "
+msgid "Orca Slicer"
+msgstr ""
 
 msgid "OrcaSlicer is based on BambuStudio, PrusaSlicer, and SuperSlicer."
 msgstr "OrcaSlicer es basa en BambuStudio, PrusaSlicer i SuperSlicer."
@@ -3265,8 +3326,8 @@ msgid ""
 "be opened during copy check. The output G-code is at %1%.tmp."
 msgstr ""
 "La còpia del codi-G temporal ha finalitzat, però el codi exportat no s'ha "
-"pogut obrir durant la verificació de la còpia. El codi-G de sortida és a %1%."
-"tmp."
+"pogut obrir durant la verificació de la còpia. El codi-G de sortida és a "
+"%1%.tmp."
 
 #, boost-format
 msgid "G-code file exported to %1%"
@@ -3630,9 +3691,9 @@ msgstr ""
 
 #, c-format, boost-format
 msgid ""
-"Current chamber temperature is higher than the material's safe temperature,"
-"it may result in material softening and clogging.The maximum safe "
-"temperature for the material is %d"
+"Current chamber temperature is higher than the material's safe "
+"temperature,it may result in material softening and clogging.The maximum "
+"safe temperature for the material is %d"
 msgstr ""
 "La temperatura actual de la cambra és superior a la temperatura segura del "
 "material, pot provocar un estovament i obstrucció del material. La "
@@ -7901,7 +7962,15 @@ msgstr "Broquet( nozzle )"
 msgid "Nozzle temperature when printing"
 msgstr "Temperatura del broquet en imprimir"
 
-msgid "Cool plate"
+msgid "Cool Plate (SuperTack)"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Cool Plate SuperTack"
+msgstr ""
+
+msgid "Cool Plate"
 msgstr "Base Freda"
 
 msgid ""
@@ -8122,8 +8191,8 @@ msgstr ""
 msgid "Layer height limits"
 msgstr "Límits d'alçada de capa"
 
-msgid "Lift Z Enforcement"
-msgstr "Forçar elevació Z"
+msgid "Z-Hop"
+msgstr ""
 
 msgid "Retraction when switching material"
 msgstr "Retracció en canviar de material"
@@ -9841,6 +9910,11 @@ msgstr "Capa inicial"
 msgid "Initial layer bed temperature"
 msgstr "Temperatura del llit en la capa inicial"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Cool Plate SuperTack"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Cool Plate"
@@ -11549,8 +11623,8 @@ msgid "mm/s² or %"
 msgstr "mm/s o %"
 
 msgid ""
-"Acceleration of sparse infill. If the value is expressed as a percentage (e."
-"g. 100%), it will be calculated based on the default acceleration."
+"Acceleration of sparse infill. If the value is expressed as a percentage "
+"(e.g. 100%), it will be calculated based on the default acceleration."
 msgstr ""
 "Acceleració del farciment poc dens. Si el valor s'expressa en percentatge "
 "( per exemple, 100% ), es calcularà a partir de l'acceleració predeterminada."
@@ -12865,8 +12939,8 @@ msgstr ""
 "Característica experimental. Longitud de retracció abans de tallar durant el "
 "canvi de filament"
 
-msgid "Z hop when retract"
-msgstr "Salt en Z quan hi ha retracció"
+msgid "Z-hop height"
+msgstr ""
 
 msgid ""
 "Whenever the retraction is done, the nozzle is lifted a little to create "
@@ -12899,6 +12973,9 @@ msgstr ""
 "sobre del paràmetre: \"Límit inferior de salt en Z\" i estigui per sota "
 "d'aquest valor"
 
+msgid "Z-hop type"
+msgstr ""
+
 msgid "Z hop type"
 msgstr "Tipus de salt en Z"
 
@@ -14264,9 +14341,9 @@ msgid "Idle temperature"
 msgstr ""
 
 msgid ""
-"Nozzle temperature when the tool is currently not used in multi-tool setups."
-"This is only used when 'Ooze prevention' is active in Print Settings. Set to "
-"0 to disable."
+"Nozzle temperature when the tool is currently not used in multi-tool "
+"setups.This is only used when 'Ooze prevention' is active in Print Settings. "
+"Set to 0 to disable."
 msgstr ""
 
 msgid "X-Y hole compensation"
@@ -14984,8 +15061,8 @@ msgstr "Suport: propagar branques a la capa %d"
 msgid ""
 "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
 msgstr ""
-"Format de fitxer desconegut. El fitxer d'entrada ha de tenir extensió .stl, ."
-"obj, .amf( .xml )."
+"Format de fitxer desconegut. El fitxer d'entrada ha de tenir "
+"extensió .stl, .obj, .amf( .xml )."
 
 msgid "Loading of a model file failed."
 msgstr "La càrrega d'un fitxer de model ha fallat."
@@ -17337,9 +17414,28 @@ msgstr ""
 "augmentar adequadament la temperatura del llit pot reduir la probabilitat de "
 "deformació."
 
-#~ msgid "Cool Plate"
+#~ msgid "ShiftLeft mouse button"
+#~ msgstr "Màj+Botó esquerre del ratolí"
+
+#~ msgid "Unselect"
+#~ msgstr "Desmarcar"
+
+#~ msgctxt "Verb"
+#~ msgid "Scale"
+#~ msgstr "Escalar"
+
+#~ msgid "Orca Slicer "
+#~ msgstr "Orca Slicer "
+
+#~ msgid "Cool plate"
 #~ msgstr "Base Freda"
 
+#~ msgid "Lift Z Enforcement"
+#~ msgstr "Forçar elevació Z"
+
+#~ msgid "Z hop when retract"
+#~ msgstr "Salt en Z quan hi ha retracció"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Invertir en capes senars"