mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-09 10:16:50 +00:00
Give generic filaments one name and one identity across every vendor
This commit is contained in:
SoftFever
@@ -8,7 +8,7 @@
|
||||
"printer_model": "Creality CR-10 Max",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Creality CR10Max",
|
||||
"nozzle_diameter": [
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_cr10max_buildplate_model.stl",
|
||||
"bed_texture": "creality_cr10max_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -116,7 +116,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
||||
"machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
|
||||
|
||||
@@ -116,7 +116,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
||||
"machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
|
||||
|
||||
@@ -116,7 +116,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
||||
"machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
|
||||
|
||||
@@ -116,7 +116,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
||||
"machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_cr10se_buildplate_model.stl",
|
||||
"bed_texture": "creality_cr10se_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PLA @Creality HF;Generic Speed PLA @Creality HF;Generic PETG @Creality;Generic TPU @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -106,7 +106,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_cr10v2_buildplate_model.stl",
|
||||
"bed_texture": "creality_cr10v2_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -109,7 +109,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 X2 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -110,7 +110,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 X2 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_cr10v3_buildplate_model.stl",
|
||||
"bed_texture": "creality_cr10v3_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
"printer_model": "Creality CR-6 Max",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.16mm Optimal @Creality CR-6 0.2",
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
"printer_model": "Creality CR-6 Max",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Creality CR-6 0.4",
|
||||
"nozzle_diameter": [
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
"printer_model": "Creality CR-6 Max",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.20mm Standard @Creality CR-6 0.6",
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
"printer_model": "Creality CR-6 Max",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.32mm Standard @Creality CR-6 0.8",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"hotend_model": "",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "Creality_CR_6_Max",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
"printer_model": "Creality CR-6 SE",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.16mm Optimal @Creality CR-6 0.2",
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
"printer_model": "Creality CR-6 SE",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Creality CR-6 0.4",
|
||||
"nozzle_diameter": [
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
"printer_model": "Creality CR-6 SE",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.20mm Standard @Creality CR-6 0.6",
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
"printer_model": "Creality CR-6 SE",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.32mm Standard @Creality CR-6 0.8",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"hotend_model": "",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "Creality_CR_6_SE",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -9,7 +9,7 @@
|
||||
"gcode_flavor": "marlin",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Creality CR-M4",
|
||||
"nozzle_diameter": [
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_crm4_buildplate_model.stl",
|
||||
"bed_texture": "creality_crm4_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -112,7 +112,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -112,7 +112,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -112,7 +112,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -112,7 +112,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -112,7 +112,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -112,7 +112,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -112,7 +112,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -112,7 +112,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3v2_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3v2_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -106,7 +106,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -110,7 +110,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling \nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -110,7 +110,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -110,7 +110,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -111,7 +111,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3s1plus_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3s1plus_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -109,7 +109,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3s1pro_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3s1pro_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3s1_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3s1_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality Ender-3 V2",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Creality Ender3V2",
|
||||
"nozzle_diameter": [
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
"printer_model": "Creality Ender-3 V2 Neo",
|
||||
"printer_structure": "i3",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Creality Ender3V2 Neo",
|
||||
"nozzle_diameter": [
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3v2neo_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3v2neo_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PLA;Creality Generic PETG"
|
||||
"default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PLA @Creality;Generic PETG @Creality"
|
||||
}
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3v2_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3v2_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -126,7 +126,7 @@
|
||||
"change_filament_gcode": "PAUSE",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -126,7 +126,7 @@
|
||||
"change_filament_gcode": "PAUSE",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -117,7 +117,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
|
||||
|
||||
@@ -117,7 +117,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
|
||||
|
||||
@@ -117,7 +117,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
|
||||
|
||||
@@ -117,7 +117,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3v3ke_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3v3ke_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all"
|
||||
"default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all"
|
||||
}
|
||||
|
||||
@@ -123,7 +123,7 @@
|
||||
"change_filament_gcode": "PAUSE",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -123,7 +123,7 @@
|
||||
"change_filament_gcode": "PAUSE",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3v3plus_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3v3plus_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all"
|
||||
"default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all"
|
||||
}
|
||||
|
||||
@@ -118,7 +118,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"file_start_gcode": ";FLAVOR:Marlin\\n;TIME:{print_time_sec}\\n;Filament used:{used_filament_length}m\\n;Layer height:{layer_height}",
|
||||
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
||||
|
||||
@@ -118,7 +118,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"file_start_gcode": ";FLAVOR:Marlin\\n;TIME:{print_time_sec}\\n;Filament used:{used_filament_length}m\\n;Layer height:{layer_height}",
|
||||
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
||||
|
||||
@@ -118,7 +118,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"file_start_gcode": ";FLAVOR:Marlin\\n;TIME:{print_time_sec}\\n;Filament used:{used_filament_length}m\\n;Layer height:{layer_height}",
|
||||
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
||||
|
||||
@@ -118,7 +118,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @Ender-3V3-all"
|
||||
"Generic PLA @Creality Ender-3V3-all"
|
||||
],
|
||||
"file_start_gcode": ";FLAVOR:Marlin\\n;TIME:{print_time_sec}\\n;Filament used:{used_filament_length}m\\n;Layer height:{layer_height}",
|
||||
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3v3se_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3v3se_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all"
|
||||
"default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all"
|
||||
}
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3v3_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3v3_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic ABS @Ender-3V3-all;Creality Generic ASA @Ender-3V3-all;Creality Generic PETG @Ender-3V3-all;Creality Generic PLA @Ender-3V3-all;Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Silk @Ender-3V3-all;Creality Generic TPU @Ender-3V3-all"
|
||||
"default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all"
|
||||
}
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender3v2_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender3v2_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -105,7 +105,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -9,5 +9,5 @@
|
||||
"bed_texture": "creality_ender5max_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"default_materials": "Creality Hyper PLA-CF @Ender-5Max-all;Creality Hyper PLA @Ender-5Max-all;Creality Hyper ABS @Ender-5Max-all;Creality Generic TPU @Ender-5Max-all;Creality Generic ASA @Ender-5Max-all;Creality Silk PLA @Ender-5Max-all;Creality Generic PLA @Ender-5Max-all;Creality Generic PETG @Ender-5Max-all;Creality Generic ABS @Ender-5Max-all;Creality Generic PA @Ender-5Max-all"
|
||||
"default_materials": "Creality Hyper PLA-CF @Ender-5Max-all;Creality Hyper PLA @Ender-5Max-all;Creality Hyper ABS @Ender-5Max-all;Generic TPU @Creality Ender-5Max-all;Generic ASA @Creality Ender-5Max-all;Creality Silk PLA @Ender-5Max-all;Generic PLA @Creality Ender-5Max-all;Generic PETG @Creality Ender-5Max-all;Generic ABS @Creality Ender-5Max-all;Generic PA @Creality Ender-5Max-all"
|
||||
}
|
||||
|
||||
@@ -108,7 +108,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < printable_height-10}G1 Z{z_offset+ printable_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender5plus_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender5plus_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality Ender-5 Pro (2019)",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.16mm Optimal @Creality Ender5Pro (2019) 0.2",
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality Ender-5 Pro (2019)",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.25",
|
||||
"default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.25",
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality Ender-5 Pro (2019)",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.3",
|
||||
"default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.3",
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality Ender-5 Pro (2019)",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019)",
|
||||
"nozzle_diameter": [
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality Ender-5 Pro (2019)",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.5",
|
||||
"default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.5",
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality Ender-5 Pro (2019)",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.6",
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality Ender-5 Pro (2019)",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.20mm Standard @Creality Ender5Pro (2019) 0.8",
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality Ender-5 Pro (2019)",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"printer_variant": "1.0",
|
||||
"default_print_profile": "0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender5pro_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender5pro_buildplate_texture.svg",
|
||||
"hotend_model": "hotend.stl",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -105,7 +105,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender5s1_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender5s1_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender5_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender5_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -101,7 +101,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender5s_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender5s_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -105,7 +105,7 @@
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
"Generic PLA @Creality"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < printable_height-10}G1 Z{z_offset+ printable_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "creality_ender6_buildplate_model.stl",
|
||||
"bed_texture": "creality_ender6_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
|
||||
"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
|
||||
}
|
||||
|
||||
@@ -9,5 +9,5 @@
|
||||
"bed_texture": "creality_hi_buildplate_texture.svg",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Creality Generic ABS @Hi-all;Creality Generic ASA @Hi-all;Creality Generic ASA-CF @Hi-all;Creality Generic PETG @Hi-all;Creality Generic PETG-CF @Hi-all;Creality Generic PLA @Hi-all;Creality Generic PLA High Speed @Hi-all;Creality Generic PLA Matte @Hi-all;Creality Generic PLA Silk @Hi-all;Creality Generic PLA-CF @Hi-all;Creality Generic PLA Wood @Hi-all;Creality Generic TPU @Hi-all"
|
||||
"default_materials": "Generic ABS @Creality Hi-all;Generic ASA @Creality Hi-all;Generic ASA-CF @Creality Hi-all;Generic PETG @Creality Hi-all;Generic PETG-CF @Creality Hi-all;Generic PLA @Creality Hi-all;Generic PLA High Speed @Creality Hi-all;Generic PLA Matte @Creality Hi-all;Generic PLA Silk @Creality Hi-all;Generic PLA-CF @Creality Hi-all;Generic PLA Wood @Creality Hi-all;Generic TPU @Creality Hi-all"
|
||||
}
|
||||
|
||||
@@ -121,7 +121,7 @@
|
||||
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality HF Generic PLA"
|
||||
"Generic PLA HF @Creality"
|
||||
],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -121,7 +121,7 @@
|
||||
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality HF Generic PLA"
|
||||
"Generic PLA HF @Creality"
|
||||
],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -121,7 +121,7 @@
|
||||
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality HF Generic PLA"
|
||||
"Generic PLA HF @Creality"
|
||||
],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -122,7 +122,7 @@
|
||||
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality HF Generic PLA"
|
||||
"Generic PLA HF @Creality"
|
||||
],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -122,7 +122,7 @@
|
||||
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality HF Generic PLA"
|
||||
"Generic PLA HF @Creality"
|
||||
],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -122,7 +122,7 @@
|
||||
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality HF Generic PLA"
|
||||
"Generic PLA HF @Creality"
|
||||
],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -9,5 +9,5 @@
|
||||
"bed_texture": "creality_k1max_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU"
|
||||
"default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality;Generic PLA @Creality;Generic PLA @Creality HF;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality"
|
||||
}
|
||||
|
||||
@@ -83,7 +83,7 @@
|
||||
"use_relative_e_distances": "1",
|
||||
"z_offset": "0",
|
||||
"default_filament_profile": [
|
||||
"Creality HF Generic PLA"
|
||||
"Generic PLA HF @Creality"
|
||||
],
|
||||
"deretraction_speed": "40",
|
||||
"extruder_colour": "#FCE94F",
|
||||
|
||||
@@ -9,5 +9,5 @@
|
||||
"hotend_model": "",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "Creality_K1_Max_CFS_C",
|
||||
"default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU"
|
||||
"default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality;Generic PLA @Creality;Generic PLA @Creality HF;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality"
|
||||
}
|
||||
|
||||
@@ -121,7 +121,7 @@
|
||||
"manual_filament_change": "0",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @K1-all"
|
||||
"Generic PLA @Creality K1-all"
|
||||
],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
|
||||
@@ -83,7 +83,7 @@
|
||||
"use_relative_e_distances": "1",
|
||||
"z_offset": "0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @K1-all"
|
||||
"Generic PLA @Creality K1-all"
|
||||
],
|
||||
"deretraction_speed": "30",
|
||||
"extruder_colour": "#FCE94F",
|
||||
|
||||
@@ -83,7 +83,7 @@
|
||||
"use_relative_e_distances": "1",
|
||||
"z_offset": "0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @K1-all"
|
||||
"Generic PLA @Creality K1-all"
|
||||
],
|
||||
"deretraction_speed": "30",
|
||||
"extruder_colour": "#FCE94F",
|
||||
|
||||
@@ -9,5 +9,5 @@
|
||||
"bed_texture": "creality_k1se_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all"
|
||||
"default_materials": "Generic ABS @Creality K1-all;Generic ASA @Creality K1-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PLA @Creality K1-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality K1-all"
|
||||
}
|
||||
|
||||
@@ -82,7 +82,7 @@
|
||||
"use_relative_e_distances": "1",
|
||||
"z_offset": "0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA @K1-all"
|
||||
"Generic PLA @Creality K1-all"
|
||||
],
|
||||
"deretraction_speed": "30",
|
||||
"extruder_colour": "#FCE94F",
|
||||
|
||||
@@ -9,5 +9,5 @@
|
||||
"hotend_model": "",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "Creality_K1_SE_CFS_C",
|
||||
"default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all"
|
||||
"default_materials": "Generic ABS @Creality K1-all;Generic ASA @Creality K1-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PLA @Creality K1-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality K1-all"
|
||||
}
|
||||
|
||||
@@ -9,5 +9,5 @@
|
||||
"bed_texture": "creality_k1_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PC @K1-all;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PETG;Creality Generic TPU"
|
||||
"default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PC @Creality K1-all;Generic PLA @Creality;Generic PLA @Creality HF;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PETG @Creality;Generic TPU @Creality"
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user