juli/OrcaSlicer
1
1 Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-10-17 20:57:26 +00:00
Code Issues Packages Projects Releases Wiki Activity

NEW: add nozzle_hrc and filament required hrc

Browse Source 
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed

either of it be zero means use other printers
or user want to print it anyway

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
This commit is contained in:
qing.zhang authored and Lane.Wei committed 2022-12-15 04:33:48 -05:00
1 parent 9ec439c8f5
commit 6ca5df9118
21 files changed
+107 -19
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json
+1
View File
@@ -30,6 +30,7 @@
"Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.4 nozzle",
"Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle",
"Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle",
"Bambu Lab X1 0.4 nozzle",
"Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.6 nozzle",
"Bambu Lab X1 0.8 nozzle" "Bambu Lab X1 0.8 nozzle"
] ]
resources/profiles/BBL/filament/Bambu PA-CF @base.json
+3
View File
@@ -5,6 +5,9 @@
"from": "system", "from": "system",
"instantiation": "false", "instantiation": "false",
"inherits": "fdm_filament_pa", "inherits": "fdm_filament_pa",
"required_nozzle_HRC": [
"55"
],
"filament_vendor": [ "filament_vendor": [
"Bambu Lab" "Bambu Lab"
], ],
resources/profiles/BBL/filament/Bambu PET-CF @base.json
+3
View File
@@ -5,6 +5,9 @@
"from": "system", "from": "system",
"instantiation": "false", "instantiation": "false",
"inherits": "fdm_filament_pet", "inherits": "fdm_filament_pet",
"required_nozzle_HRC": [
"55"
],
"filament_vendor": [ "filament_vendor": [
"Bambu Lab" "Bambu Lab"
], ],
resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json
+1
View File
@@ -9,6 +9,7 @@
"Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.4 nozzle",
"Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle",
"Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle",
"Bambu Lab X1 0.4 nozzle",
"Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.6 nozzle",
"Bambu Lab X1 0.8 nozzle" "Bambu Lab X1 0.8 nozzle"
] ]
resources/profiles/BBL/filament/Generic PA-CF.json
+4
View File
@@ -6,6 +6,9 @@
"from": "system", "from": "system",
"instantiation": "true", "instantiation": "true",
"inherits": "fdm_filament_pa", "inherits": "fdm_filament_pa",
"required_nozzle_HRC": [
"55"
],
"filament_type": [ "filament_type": [
"PA-CF" "PA-CF"
], ],
@@ -34,6 +37,7 @@
"Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.4 nozzle",
"Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle",
"Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle",
"Bambu Lab X1 0.4 nozzle",
"Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.6 nozzle",
"Bambu Lab X1 0.8 nozzle" "Bambu Lab X1 0.8 nozzle"
] ]
resources/profiles/BBL/filament/Generic PA.json
+1
View File
@@ -19,6 +19,7 @@
"Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.4 nozzle",
"Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle",
"Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle",
"Bambu Lab X1 0.4 nozzle",
"Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.6 nozzle",
"Bambu Lab X1 0.8 nozzle" "Bambu Lab X1 0.8 nozzle"
] ]
resources/profiles/BBL/filament/Generic PLA-CF.json
+10 -6
View File
@@ -12,6 +12,9 @@
"filament_type": [ "filament_type": [
"PLA-CF" "PLA-CF"
], ],
"required_nozzle_HRC": [
"55"
],
"filament_max_volumetric_speed": [ "filament_max_volumetric_speed": [
"12" "12"
], ],
@@ -34,10 +37,11 @@
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}" "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}"
], ],
"compatible_printers": [ "compatible_printers": [
"Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.4 nozzle",
"Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle",
"Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle",
"Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.4 nozzle",
"Bambu Lab X1 0.8 nozzle" "Bambu Lab X1 0.6 nozzle",
] "Bambu Lab X1 0.8 nozzle"
]
} }
resources/profiles/BBL/filament/Generic PVA.json
+1
View File
@@ -8,6 +8,7 @@
"compatible_printers": [ "compatible_printers": [
"Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.4 nozzle",
"Bambu Lab X1 0.4 nozzle", "Bambu Lab X1 0.4 nozzle",
"Bambu Lab X1 Carbon 0.6 nozzle",
"Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle",
"Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.6 nozzle",
"Bambu Lab X1 0.8 nozzle" "Bambu Lab X1 0.8 nozzle"
resources/profiles/BBL/filament/fdm_filament_common.json
+3
View File
@@ -3,6 +3,9 @@
"name": "fdm_filament_common", "name": "fdm_filament_common",
"from": "system", "from": "system",
"instantiation": "false", "instantiation": "false",
"required_nozzle_HRC": [
"20"
],
"cool_plate_temp" : [ "cool_plate_temp" : [
"60" "60"
], ],
resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json
+1
View File
@@ -29,5 +29,6 @@
"machine_load_filament_time": "17", "machine_load_filament_time": "17",
"machine_unload_filament_time": "16", "machine_unload_filament_time": "16",
"nozzle_type": "stainless_steel", "nozzle_type": "stainless_steel",
"nozzle_hrc": "20",
"auxiliary_fan": "0" "auxiliary_fan": "0"
} }
resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json
+4 -3
View File
@@ -26,6 +26,7 @@
"retraction_minimum_travel": [ "retraction_minimum_travel": [
"3" "3"
], ],
"machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 202200929 =====================\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG0 Z12 F300 ; lower the hotbed , to prevent the nozzle is below the hotbed\nG0 Z-6;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\n{if bbl_bed_temperature_gcode}\nM1002 set_heatbed_surface_temp:[bed_temperature_initial_layer_vector] ;config bed temps\nM140 A S[bed_temperature_initial_layer_single] ;set bed temp\nM190 A S[bed_temperature_initial_layer_single] ;wait for bed temp\n{else}\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n{endif}\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_tool]==\"PLA\"}\n {if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on \nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_tool]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_tool]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_tool]A\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n Line truncated "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 202201020 =====================\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG0 Z12 F300 ; lower the hotbed , to prevent the nozzle is below the hotbed\nG0 Z-6;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_tool]==\"PLA\"}\n {if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on \nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_tool]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_tool]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_tool]A\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;===== check scanner clarity ===========================\nM972 S5 P0 \nM400 S1\n;===== check scanner clarity end =======================\n\n;======Line truncated
"nozzle_type": "hardened_steel" "nozzle_type": "hardened_steel",
} "nozzle_hrc": "55"
}
resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json
+4 -3
View File
@@ -29,6 +29,7 @@
"retract_length_toolchange": [ "retract_length_toolchange": [
"3" "3"
], ],
"machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 202200929 =====================\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG0 Z12 F300 ; lower the hotbed , to prevent the nozzle is below the hotbed\nG0 Z-6;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\n{if bbl_bed_temperature_gcode}\nM1002 set_heatbed_surface_temp:[bed_temperature_initial_layer_vector] ;config bed temps\nM140 A S[bed_temperature_initial_layer_single] ;set bed temp\nM190 A S[bed_temperature_initial_layer_single] ;wait for bed temp\n{else}\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n{endif}\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_tool]==\"PLA\"}\n {if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on \nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_tool]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_tool]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_tool]A\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n Line truncated "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 202201020 =====================\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG0 Z12 F300 ; lower the hotbed , to prevent the nozzle is below the hotbed\nG0 Z-6;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_tool]==\"PLA\"}\n {if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on \nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_tool]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_tool]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_tool]A\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;===== check scanner clarity ===========================\nM972 S5 P0 \nM400 S1\n;===== check scanner clarity end =======================\n\n;======Line truncated
"nozzle_type": "hardened_steel" "nozzle_type": "hardened_steel",
} "nozzle_hrc": "55"
}
resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json
+3 -2
View File
@@ -26,6 +26,7 @@
"retraction_minimum_travel": [ "retraction_minimum_travel": [
"5" "5"
], ],
"machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 202200929 =====================\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG0 Z12 F300 ; lower the hotbed , to prevent the nozzle is below the hotbed\nG0 Z-6;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\n{if bbl_bed_temperature_gcode}\nM1002 set_heatbed_surface_temp:[bed_temperature_initial_layer_vector] ;config bed temps\nM140 A S[bed_temperature_initial_layer_single] ;set bed temp\nM190 A S[bed_temperature_initial_layer_single] ;wait for bed temp\n{else}\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n{endif}\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_tool]==\"PLA\"}\n {if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on \nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_tool]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_tool]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_tool]A\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n GLine truncated "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 202201020 =====================\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG0 Z12 F300 ; lower the hotbed , to prevent the nozzle is below the hotbed\nG0 Z-6;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_tool]==\"PLA\"}\n {if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on \nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_tool]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_tool]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_tool]A\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;===== check scanner clarity ===========================\nM972 S5 P0 \nM400 S1\n;===== check scanner clarity end =======================\n\n;========Line truncated
"nozzle_type": "stainless_steel" "nozzle_type": "stainless_steel",
"nozzle_hrc": "20"
} }
resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json
+1
View File
@@ -29,5 +29,6 @@
"machine_load_filament_time": "17", "machine_load_filament_time": "17",
"machine_unload_filament_time": "16", "machine_unload_filament_time": "16",
"nozzle_type": "hardened_steel", "nozzle_type": "hardened_steel",
"nozzle_hrc": "55",
"auxiliary_fan": "1" "auxiliary_fan": "1"
} }
src/libslic3r/GCode/GCodeProcessor.cpp
+34
View File
@@ -35,6 +35,7 @@ static const float DEFAULT_TRAVEL_ACCELERATION = 1250.0f;
static const size_t MIN_EXTRUDERS_COUNT = 5; static const size_t MIN_EXTRUDERS_COUNT = 5;
static const float DEFAULT_FILAMENT_DIAMETER = 1.75f; static const float DEFAULT_FILAMENT_DIAMETER = 1.75f;
static const int DEFAULT_FILAMENT_HRC = 0;
static const float DEFAULT_FILAMENT_DENSITY = 1.245f; static const float DEFAULT_FILAMENT_DENSITY = 1.245f;
static const int DEFAULT_FILAMENT_VITRIFICATION_TEMPERATURE = 0; static const int DEFAULT_FILAMENT_VITRIFICATION_TEMPERATURE = 0;
static const Slic3r::Vec3f DEFAULT_EXTRUDER_OFFSET = Slic3r::Vec3f::Zero(); static const Slic3r::Vec3f DEFAULT_EXTRUDER_OFFSET = Slic3r::Vec3f::Zero();
@@ -778,6 +779,7 @@ void GCodeProcessorResult::reset() {
extruders_count = 0; extruders_count = 0;
extruder_colors = std::vector<std::string>(); extruder_colors = std::vector<std::string>();
filament_diameters = std::vector<float>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_DIAMETER); filament_diameters = std::vector<float>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_DIAMETER);
required_nozzle_HRC = std::vector<int>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_HRC);
filament_densities = std::vector<float>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_DENSITY); filament_densities = std::vector<float>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_DENSITY);
custom_gcode_per_print_z = std::vector<CustomGCode::Item>(); custom_gcode_per_print_z = std::vector<CustomGCode::Item>();
warnings.clear(); warnings.clear();
@@ -881,14 +883,17 @@ void GCodeProcessor::apply_config(const PrintConfig& config)
m_extruder_offsets.resize(extruders_count); m_extruder_offsets.resize(extruders_count);
m_extruder_colors.resize(extruders_count); m_extruder_colors.resize(extruders_count);
m_result.filament_diameters.resize(extruders_count); m_result.filament_diameters.resize(extruders_count);
m_result.required_nozzle_HRC.resize(extruders_count);
m_result.filament_densities.resize(extruders_count); m_result.filament_densities.resize(extruders_count);
m_result.filament_vitrification_temperature.resize(extruders_count); m_result.filament_vitrification_temperature.resize(extruders_count);
m_extruder_temps.resize(extruders_count); m_extruder_temps.resize(extruders_count);
m_result.nozzle_hrc = static_cast<int>(config.nozzle_hrc.getInt());
for (size_t i = 0; i < extruders_count; ++ i) { for (size_t i = 0; i < extruders_count; ++ i) {
m_extruder_offsets[i] = to_3d(config.extruder_offset.get_at(i).cast<float>().eval(), 0.f); m_extruder_offsets[i] = to_3d(config.extruder_offset.get_at(i).cast<float>().eval(), 0.f);
m_extruder_colors[i] = static_cast<unsigned char>(i); m_extruder_colors[i] = static_cast<unsigned char>(i);
m_result.filament_diameters[i] = static_cast<float>(config.filament_diameter.get_at(i)); m_result.filament_diameters[i] = static_cast<float>(config.filament_diameter.get_at(i));
m_result.required_nozzle_HRC[i] = static_cast<int>(config.required_nozzle_HRC.get_at(i));
m_result.filament_densities[i] = static_cast<float>(config.filament_density.get_at(i)); m_result.filament_densities[i] = static_cast<float>(config.filament_density.get_at(i));
m_result.filament_vitrification_temperature[i] = static_cast<float>(config.temperature_vitrification.get_at(i)); m_result.filament_vitrification_temperature[i] = static_cast<float>(config.temperature_vitrification.get_at(i));
} }
@@ -935,6 +940,9 @@ void GCodeProcessor::apply_config(const DynamicPrintConfig& config)
if (nozzle_volume != nullptr) if (nozzle_volume != nullptr)
m_nozzle_volume = nozzle_volume->value; m_nozzle_volume = nozzle_volume->value;
const ConfigOptionInt *nozzle_HRC = config.option<ConfigOptionInt>("nozzle_hrc");
if (nozzle_HRC != nullptr) m_result.nozzle_hrc = nozzle_HRC->value;
const ConfigOptionEnum<GCodeFlavor>* gcode_flavor = config.option<ConfigOptionEnum<GCodeFlavor>>("gcode_flavor"); const ConfigOptionEnum<GCodeFlavor>* gcode_flavor = config.option<ConfigOptionEnum<GCodeFlavor>>("gcode_flavor");
if (gcode_flavor != nullptr) if (gcode_flavor != nullptr)
m_flavor = gcode_flavor->value; m_flavor = gcode_flavor->value;
@@ -978,6 +986,18 @@ void GCodeProcessor::apply_config(const DynamicPrintConfig& config)
} }
} }
const ConfigOptionInts *filament_HRC = config.option<ConfigOptionInts>("required_nozzle_HRC");
if (filament_HRC != nullptr) {
m_result.required_nozzle_HRC.clear();
m_result.required_nozzle_HRC.resize(filament_HRC->values.size());
for (size_t i = 0; i < filament_HRC->values.size(); ++i) { m_result.required_nozzle_HRC[i] = static_cast<float>(filament_HRC->values[i]); }
}
if (m_result.required_nozzle_HRC.size() < m_result.extruders_count) {
for (size_t i = m_result.required_nozzle_HRC.size(); i < m_result.extruders_count; ++i) { m_result.required_nozzle_HRC.emplace_back(DEFAULT_FILAMENT_HRC);
}
}
const ConfigOptionFloats* filament_densities = config.option<ConfigOptionFloats>("filament_density"); const ConfigOptionFloats* filament_densities = config.option<ConfigOptionFloats>("filament_density");
if (filament_densities != nullptr) { if (filament_densities != nullptr) {
m_result.filament_densities.clear(); m_result.filament_densities.clear();
@@ -3996,6 +4016,20 @@ void GCodeProcessor::update_slice_warnings()
if (!warning.params.empty()) { if (!warning.params.empty()) {
warning.msg = BED_TEMP_TOO_HIGH_THAN_FILAMENT; warning.msg = BED_TEMP_TOO_HIGH_THAN_FILAMENT;
m_result.warnings.push_back(warning); m_result.warnings.push_back(warning);
//bbs:HRC checker
if (m_result.nozzle_hrc!=0) {
for (size_t i = 0; i < used_extruders.size(); i++) {
int HRC=0;
if (used_extruders[i] < m_result.required_nozzle_HRC.size())
HRC = m_result.required_nozzle_HRC[used_extruders[i]];
if (HRC != 0 && (m_result.nozzle_hrc<HRC)) {
GCodeProcessorResult::SliceWarning warning;
warning.level = 1;
warning.msg = THE_ACTUAL_NOZZLE_HRC_SMALLER_THAN__THE_REQUAIRED_NOZZLE_HRC;
m_result.warnings.emplace_back(std::move(warning));
}
}
} }
m_result.warnings.shrink_to_fit(); m_result.warnings.shrink_to_fit();
src/libslic3r/GCode/GCodeProcessor.hpp
+4 -2
View File
@@ -17,6 +17,7 @@
namespace Slic3r { namespace Slic3r {
// slice warnings enum strings // slice warnings enum strings
#define THE_ACTUAL_NOZZLE_HRC_SMALLER_THAN__THE_REQUAIRED_NOZZLE_HRC "the_actual_nozzle_hrc_smaller_than_the_required_nozzle_hrc"
#define BED_TEMP_TOO_HIGH_THAN_FILAMENT "bed_temperature_too_high_than_filament" #define BED_TEMP_TOO_HIGH_THAN_FILAMENT "bed_temperature_too_high_than_filament"
enum class EMoveType : unsigned char enum class EMoveType : unsigned char
@@ -86,6 +87,7 @@ namespace Slic3r {
struct GCodeProcessorResult struct GCodeProcessorResult
{ {
struct SettingsIds struct SettingsIds
{ {
std::string print; std::string print;
@@ -152,12 +154,14 @@ namespace Slic3r {
size_t extruders_count; size_t extruders_count;
std::vector<std::string> extruder_colors; std::vector<std::string> extruder_colors;
std::vector<float> filament_diameters; std::vector<float> filament_diameters;
std::vector<int> required_nozzle_HRC;
std::vector<float> filament_densities; std::vector<float> filament_densities;
std::vector<int> filament_vitrification_temperature; std::vector<int> filament_vitrification_temperature;
PrintEstimatedStatistics print_statistics; PrintEstimatedStatistics print_statistics;
std::vector<CustomGCode::Item> custom_gcode_per_print_z; std::vector<CustomGCode::Item> custom_gcode_per_print_z;
//BBS //BBS
std::vector<SliceWarning> warnings; std::vector<SliceWarning> warnings;
int nozzle_hrc;
#if ENABLE_GCODE_VIEWER_STATISTICS #if ENABLE_GCODE_VIEWER_STATISTICS
int64_t time{ 0 }; int64_t time{ 0 };
@@ -575,7 +579,6 @@ namespace Slic3r {
std::vector<Vec3f> m_extruder_offsets; std::vector<Vec3f> m_extruder_offsets;
GCodeFlavor m_flavor; GCodeFlavor m_flavor;
float m_nozzle_volume; float m_nozzle_volume;
AxisCoords m_start_position; // mm AxisCoords m_start_position; // mm
AxisCoords m_end_position; // mm AxisCoords m_end_position; // mm
AxisCoords m_origin; // mm AxisCoords m_origin; // mm
@@ -832,7 +835,6 @@ namespace Slic3r {
float get_filament_load_time(size_t extruder_id); float get_filament_load_time(size_t extruder_id);
float get_filament_unload_time(size_t extruder_id); float get_filament_unload_time(size_t extruder_id);
int get_filament_vitrification_temperature(size_t extrude_id); int get_filament_vitrification_temperature(size_t extrude_id);
void process_custom_gcode_time(CustomGCode::Type code); void process_custom_gcode_time(CustomGCode::Type code);
void process_filaments(CustomGCode::Type code); void process_filaments(CustomGCode::Type code);
src/libslic3r/Preset.cpp
+3 -2
View File
@@ -734,7 +734,8 @@ static std::vector<std::string> s_Preset_print_options {
}; };
static std::vector<std::string> s_Preset_filament_options { static std::vector<std::string> s_Preset_filament_options {
/* "filament_colour",*/ "default_filament_colour", "filament_diameter", "filament_type", "filament_soluble", "filament_is_support", "filament_max_volumetric_speed", /*"filament_colour", */ "default_filament_colour","required_nozzle_HRC","filament_diameter", "filament_type", "filament_soluble", "filament_is_support",
"filament_max_volumetric_speed",
"filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower", "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
"nozzle_temperature", "nozzle_temperature_initial_layer", "nozzle_temperature", "nozzle_temperature_initial_layer",
// BBS // BBS
@@ -771,7 +772,7 @@ static std::vector<std::string> s_Preset_printer_options {
"silent_mode", "silent_mode",
// BBS // BBS
"scan_first_layer", "machine_load_filament_time", "machine_unload_filament_time", "machine_pause_gcode", "template_custom_gcode", "scan_first_layer", "machine_load_filament_time", "machine_unload_filament_time", "machine_pause_gcode", "template_custom_gcode",
"nozzle_type", "auxiliary_fan", "nozzle_volume", "nozzle_type", "nozzle_hrc","auxiliary_fan", "nozzle_volume",
//SoftFever //SoftFever
"host_type", "print_host", "printhost_apikey", "host_type", "print_host", "printhost_apikey",
"printhost_cafile","printhost_port","printhost_authorization_type", "printhost_cafile","printhost_port","printhost_authorization_type",
src/libslic3r/Print.cpp
+3 -1
View File
@@ -130,7 +130,9 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
// BBS // BBS
"wipe_distance", "wipe_distance",
"curr_bed_type", "curr_bed_type",
"nozzle_volume" "nozzle_volume",
"nozzle_hrc",
"required_nozzle_HRC"
}; };
static std::unordered_set<std::string> steps_ignore; static std::unordered_set<std::string> steps_ignore;
src/libslic3r/PrintConfig.cpp
+18
View File
@@ -1089,6 +1089,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comDevelop; def->mode = comDevelop;
def->set_default_value(new ConfigOptionStrings{ "#00AE42" }); def->set_default_value(new ConfigOptionStrings{ "#00AE42" });
//bbs
def = this->add("required_nozzle_HRC", coInts);
def->label = L("Required nozzle HRC");
def->tooltip = L("the HRC of nozzle when print the filament. zeros means the setting not be used");
def->min = 0;
def->max = 500;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionInts{0});
def = this->add("filament_max_volumetric_speed", coFloats); def = this->add("filament_max_volumetric_speed", coFloats);
def->label = L("Max volumetric speed"); def->label = L("Max volumetric speed");
def->tooltip = L("This setting stands for how much volume of filament can be melted and extruded per second. " def->tooltip = L("This setting stands for how much volume of filament can be melted and extruded per second. "
@@ -1434,6 +1443,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comDevelop; def->mode = comDevelop;
def->set_default_value(new ConfigOptionEnum<NozzleType>(ntUndefine)); def->set_default_value(new ConfigOptionEnum<NozzleType>(ntUndefine));
def = this->add("nozzle_hrc", coInt);
def->label = L("Nozzle HRC");
def->tooltip = L("The hardness of nozzle. zeros means the setting not be used");
def->sidetext = L("HRC");
def->min = 0;
def->max = 500;
def->mode = comDevelop;
def->set_default_value(new ConfigOptionInt{0});
def = this->add("auxiliary_fan", coBool); def = this->add("auxiliary_fan", coBool);
def->label = L("Auxiliary part cooling fan"); def->label = L("Auxiliary part cooling fan");
def->tooltip = L("Enable this option if machine has auxiliary part cooling fan"); def->tooltip = L("Enable this option if machine has auxiliary part cooling fan");
src/libslic3r/PrintConfig.hpp
+2
View File
@@ -759,6 +759,7 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionStrings, default_filament_colour)) ((ConfigOptionStrings, default_filament_colour))
((ConfigOptionInts, temperature_vitrification)) //BBS ((ConfigOptionInts, temperature_vitrification)) //BBS
((ConfigOptionFloats, filament_max_volumetric_speed)) ((ConfigOptionFloats, filament_max_volumetric_speed))
((ConfigOptionInts, required_nozzle_HRC))
((ConfigOptionFloat, machine_load_filament_time)) ((ConfigOptionFloat, machine_load_filament_time))
((ConfigOptionFloat, machine_unload_filament_time)) ((ConfigOptionFloat, machine_unload_filament_time))
((ConfigOptionFloats, filament_minimal_purge_on_wipe_tower)) ((ConfigOptionFloats, filament_minimal_purge_on_wipe_tower))
@@ -792,6 +793,7 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionString, template_custom_gcode)) ((ConfigOptionString, template_custom_gcode))
//BBS //BBS
((ConfigOptionEnum<NozzleType>, nozzle_type)) ((ConfigOptionEnum<NozzleType>, nozzle_type))
((ConfigOptionInt, nozzle_hrc))
((ConfigOptionBool, auxiliary_fan)) ((ConfigOptionBool, auxiliary_fan))
) )
src/slic3r/GUI/Tab.cpp
+3
View File
@@ -2424,6 +2424,8 @@ void TabFilament::build()
optgroup->append_single_option_line("filament_soluble"); optgroup->append_single_option_line("filament_soluble");
// BBS // BBS
optgroup->append_single_option_line("filament_is_support"); optgroup->append_single_option_line("filament_is_support");
//optgroup->append_single_option_line("filament_colour");
optgroup->append_single_option_line("required_nozzle_HRC");
optgroup->append_single_option_line("default_filament_colour"); optgroup->append_single_option_line("default_filament_colour");
optgroup->append_single_option_line("filament_diameter"); optgroup->append_single_option_line("filament_diameter");
optgroup->append_single_option_line("filament_flow_ratio"); optgroup->append_single_option_line("filament_flow_ratio");
@@ -2852,6 +2854,7 @@ void TabPrinter::build_fff()
optgroup = page->new_optgroup(L("Accessory") /*, L"param_accessory"*/); optgroup = page->new_optgroup(L("Accessory") /*, L"param_accessory"*/);
optgroup->append_single_option_line("nozzle_type"); optgroup->append_single_option_line("nozzle_type");
optgroup->append_single_option_line("nozzle_hrc");
optgroup->append_single_option_line("auxiliary_fan"); optgroup->append_single_option_line("auxiliary_fan");
const int gcode_field_height = 15; // 150 const int gcode_field_height = 15; // 150