ENH: post commit for params to H2D

1. Add flush and  retract params in profiles

jira: STUDIO-11965

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id4a1017a927be58d1e951a78b98f1a86b060e602
(cherry picked from commit 403fb623729bc3f3433a80a90fc55c6b09a6d4b2)

resources/profiles/BBL/filament/Generic PVA @BBL H2D.json

@@ -5,7 +5,6 @@
     "from": "system",
     "setting_id": "GFSS99_06",
     "instantiation": "true",
-    "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.",
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -14,6 +13,14 @@
         "0.95",
         "0.95"
     ],
+    "filament_flush_temp": [
+        "0",
+        "0"
+    ],
+    "filament_flush_volumetric_speed": [
+        "0",
+        "0"
+    ],
     "filament_long_retractions_when_cut": [
         "nil",
         "nil"
@@ -74,6 +81,10 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
+    "long_retractions_when_ec": [
+        "1",
+        "1"
+    ],
     "nozzle_temperature": [
         "220",
         "220"
@@ -82,6 +93,10 @@
         "220",
         "220"
     ],
+    "retraction_distances_when_ec": [
+        "10",
+        "10"
+    ],
     "compatible_printers": [
         "Bambu Lab H2D 0.4 nozzle",
         "Bambu Lab H2D 0.6 nozzle",