mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-28 11:21:30 +00:00
Merge branch 'main' into belt/baseChanges
This commit is contained in:
Rodrigo Faselli
@@ -12,21 +12,21 @@
|
|||||||
"name": "re3D Gigabot 4 XLT",
|
"name": "re3D Gigabot 4 XLT",
|
||||||
"sub_path": "machine/re3D Gigabot 4 XLT.json"
|
"sub_path": "machine/re3D Gigabot 4 XLT.json"
|
||||||
},
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D GigabotX 2",
|
||||||
|
"sub_path": "machine/re3D GigabotX 2.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D GigabotX 2 XLT",
|
||||||
|
"sub_path": "machine/re3D GigabotX 2 XLT.json"
|
||||||
|
},
|
||||||
{
|
{
|
||||||
"name": "re3D Terabot 4",
|
"name": "re3D Terabot 4",
|
||||||
"sub_path": "machine/re3D Terabot 4.json"
|
"sub_path": "machine/re3D Terabot 4.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "re3D Gigabot X2",
|
"name": "re3D TerabotX 2",
|
||||||
"sub_path": "machine/re3D Gigabot X2.json"
|
"sub_path": "machine/re3D TerabotX 2.json"
|
||||||
},
|
|
||||||
{
|
|
||||||
"name": "re3D Gigabot X2 XLT",
|
|
||||||
"sub_path": "machine/re3D Gigabot X2 XLT.json"
|
|
||||||
},
|
|
||||||
{
|
|
||||||
"name": "re3D Terabot X2",
|
|
||||||
"sub_path": "machine/re3D Terabot X2.json"
|
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"process_list": [
|
"process_list": [
|
||||||
@@ -43,28 +43,32 @@
|
|||||||
"sub_path": "process/fgf_process_re3D_common.json"
|
"sub_path": "process/fgf_process_re3D_common.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "0.2mm Fine @re3D fdm 0.4",
|
"name": "0.2 Fine",
|
||||||
"sub_path": "process/0.2mm Fine @re3D fdm 0.4.json"
|
"sub_path": "process/0.2mm Fine @re3D fdm 0.4.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "0.26mm Standard @re3D fdm 0.4",
|
"name": "0.26 Standard",
|
||||||
"sub_path": "process/0.26mm Standard @re3D fdm 0.4.json"
|
"sub_path": "process/0.26mm Standard @re3D fdm 0.4.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "0.32mm Draft @re3D fdm 0.4",
|
"name": "0.32 Draft",
|
||||||
"sub_path": "process/0.32mm Draft @re3D fdm 0.4.json"
|
"sub_path": "process/0.32mm Draft @re3D fdm 0.4.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "0.2mm Standard @re3D fdm 0.8",
|
"name": "0.3 Fine",
|
||||||
"sub_path": "process/0.2mm Standard @re3D fdm 0.8.json"
|
"sub_path": "process/0.3mm Fine @re3D fdm 0.8.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "0.4mm Draft @re3D fdm 0.8",
|
"name": "0.4 Standard",
|
||||||
"sub_path": "process/0.4mm Draft @re3D fdm 0.8.json"
|
"sub_path": "process/0.4mm Draft @re3D fdm 0.8.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "1.0mm Standard @re3D fgf 1.75",
|
"name": "1.0 Standard",
|
||||||
"sub_path": "process/1.0mm Standard @re3D fgf 1.75.json"
|
"sub_path": "process/1.0mm Standard @re3D fgf 1.75.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "0.6 Standard",
|
||||||
|
"sub_path": "process/0.6mm Standard @re3D fgf 0.8.json"
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"filament_list": [
|
"filament_list": [
|
||||||
@@ -72,37 +76,77 @@
|
|||||||
"name": "fdm_filament_common",
|
"name": "fdm_filament_common",
|
||||||
"sub_path": "filament/fdm_filament_common.json"
|
"sub_path": "filament/fdm_filament_common.json"
|
||||||
},
|
},
|
||||||
{
|
|
||||||
"name": "fdm_filament_pet",
|
|
||||||
"sub_path": "filament/fdm_filament_pet.json"
|
|
||||||
},
|
|
||||||
{
|
{
|
||||||
"name": "fdm_filament_pla",
|
"name": "fdm_filament_pla",
|
||||||
"sub_path": "filament/fdm_filament_pla.json"
|
"sub_path": "filament/fdm_filament_pla.json"
|
||||||
},
|
},
|
||||||
|
{
|
||||||
|
"name": "fdm_filament_pet",
|
||||||
|
"sub_path": "filament/fdm_filament_pet.json"
|
||||||
|
},
|
||||||
{
|
{
|
||||||
"name": "fdm_filament_pc",
|
"name": "fdm_filament_pc",
|
||||||
"sub_path": "filament/fdm_filament_pc.json"
|
"sub_path": "filament/fdm_filament_pc.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "re3D Greengate rPETG",
|
"name": "re3D PLA",
|
||||||
"sub_path": "filament/re3D Greengate rPETG.json"
|
"sub_path": "filament/re3D PLA.json"
|
||||||
},
|
|
||||||
{
|
|
||||||
"name": "re3D PC",
|
|
||||||
"sub_path": "filament/re3D PC.json"
|
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "re3D PETG",
|
"name": "re3D PETG",
|
||||||
"sub_path": "filament/re3D PETG.json"
|
"sub_path": "filament/re3D PETG.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "re3D PLA",
|
"name": "re3D PC",
|
||||||
"sub_path": "filament/re3D PLA.json"
|
"sub_path": "filament/re3D PC.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D Greengate rPETG",
|
||||||
|
"sub_path": "filament/re3D Greengate rPETG.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "re3D rPP",
|
"name": "re3D rPP",
|
||||||
"sub_path": "filament/re3D rPP.json"
|
"sub_path": "filament/re3D rPP.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D PLA @0.4 nozzle",
|
||||||
|
"sub_path": "filament/re3D PLA @0.4 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D PLA @0.8 nozzle",
|
||||||
|
"sub_path": "filament/re3D PLA @0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D PETG @0.4 nozzle",
|
||||||
|
"sub_path": "filament/re3D PETG @0.4 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D PETG @0.8 nozzle",
|
||||||
|
"sub_path": "filament/re3D PETG @0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D PC @0.4 nozzle",
|
||||||
|
"sub_path": "filament/re3D PC @0.4 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D PC @0.8 nozzle",
|
||||||
|
"sub_path": "filament/re3D PC @0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D Greengate rPETG @0.8 nozzle",
|
||||||
|
"sub_path": "filament/re3D Greengate rPETG @0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D Greengate rPETG @1.75 nozzle",
|
||||||
|
"sub_path": "filament/re3D Greengate rPETG @1.75 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D rPP @0.8 nozzle",
|
||||||
|
"sub_path": "filament/re3D rPP @0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D rPP @1.75 nozzle",
|
||||||
|
"sub_path": "filament/re3D rPP @1.75 nozzle.json"
|
||||||
}
|
}
|
||||||
],
|
],
|
||||||
"machine_list": [
|
"machine_list": [
|
||||||
@@ -134,6 +178,22 @@
|
|||||||
"name": "re3D Gigabot 4 XLT 0.8 nozzle",
|
"name": "re3D Gigabot 4 XLT 0.8 nozzle",
|
||||||
"sub_path": "machine/re3D Gigabot 4 XLT 0.8 nozzle.json"
|
"sub_path": "machine/re3D Gigabot 4 XLT 0.8 nozzle.json"
|
||||||
},
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D GigabotX 2 0.8 nozzle",
|
||||||
|
"sub_path": "machine/re3D GigabotX 2 0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D GigabotX 2 1.75 nozzle",
|
||||||
|
"sub_path": "machine/re3D GigabotX 2 1.75 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D GigabotX 2 XLT 0.8 nozzle",
|
||||||
|
"sub_path": "machine/re3D GigabotX 2 XLT 0.8 nozzle.json"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"name": "re3D GigabotX 2 XLT 1.75 nozzle",
|
||||||
|
"sub_path": "machine/re3D GigabotX 2 XLT 1.75 nozzle.json"
|
||||||
|
},
|
||||||
{
|
{
|
||||||
"name": "re3D Terabot 4 0.4 nozzle",
|
"name": "re3D Terabot 4 0.4 nozzle",
|
||||||
"sub_path": "machine/re3D Terabot 4 0.4 nozzle.json"
|
"sub_path": "machine/re3D Terabot 4 0.4 nozzle.json"
|
||||||
@@ -143,16 +203,12 @@
|
|||||||
"sub_path": "machine/re3D Terabot 4 0.8 nozzle.json"
|
"sub_path": "machine/re3D Terabot 4 0.8 nozzle.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "re3D Gigabot X2 1.75 nozzle",
|
"name": "re3D TerabotX 2 0.8 nozzle",
|
||||||
"sub_path": "machine/re3D Gigabot X2 1.75 nozzle.json"
|
"sub_path": "machine/re3D TerabotX 2 0.8 nozzle.json"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"name": "re3D Gigabot X2 XLT 1.75 nozzle",
|
"name": "re3D TerabotX 2 1.75 nozzle",
|
||||||
"sub_path": "machine/re3D Gigabot X2 XLT 1.75 nozzle.json"
|
"sub_path": "machine/re3D TerabotX 2 1.75 nozzle.json"
|
||||||
},
|
|
||||||
{
|
|
||||||
"name": "re3D Terabot X2 1.75 nozzle",
|
|
||||||
"sub_path": "machine/re3D Terabot X2 1.75 nozzle.json"
|
|
||||||
}
|
}
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -2,170 +2,5 @@
|
|||||||
"type": "filament",
|
"type": "filament",
|
||||||
"name": "fdm_filament_common",
|
"name": "fdm_filament_common",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "false",
|
"instantiation": "false"
|
||||||
"cool_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"eng_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"hot_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"textured_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"cool_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"eng_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"hot_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"textured_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"overhang_fan_threshold": [
|
|
||||||
"95%"
|
|
||||||
],
|
|
||||||
"overhang_fan_speed": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"slow_down_for_layer_cooling": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"close_fan_the_first_x_layers": [
|
|
||||||
"3"
|
|
||||||
],
|
|
||||||
"filament_end_gcode": [
|
|
||||||
"; filament end gcode \n"
|
|
||||||
],
|
|
||||||
"filament_flow_ratio": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"reduce_fan_stop_start_freq": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"fan_cooling_layer_time": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"filament_cost": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"filament_density": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"filament_deretraction_speed": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"filament_diameter": [
|
|
||||||
"2.85"
|
|
||||||
],
|
|
||||||
"filament_max_volumetric_speed": [
|
|
||||||
"12"
|
|
||||||
],
|
|
||||||
"filament_minimal_purge_on_wipe_tower": [
|
|
||||||
"15"
|
|
||||||
],
|
|
||||||
"filament_multitool_ramming_volume": [
|
|
||||||
"15"
|
|
||||||
],
|
|
||||||
"filament_multitool_ramming_flow": [
|
|
||||||
"15"
|
|
||||||
],
|
|
||||||
"filament_retraction_minimum_travel": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"filament_retract_before_wipe": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"filament_retract_when_changing_layer": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"filament_retraction_length": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"filament_z_hop": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"filament_z_hop_types": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"filament_retract_restart_extra": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"filament_retraction_speed": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"filament_settings_id": [
|
|
||||||
""
|
|
||||||
],
|
|
||||||
"filament_soluble": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"filament_type": [
|
|
||||||
"PLA"
|
|
||||||
],
|
|
||||||
"filament_vendor": [
|
|
||||||
"Generic"
|
|
||||||
],
|
|
||||||
"filament_wipe": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"filament_wipe_distance": [
|
|
||||||
"nil"
|
|
||||||
],
|
|
||||||
"bed_type": [
|
|
||||||
"Cool Plate"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_initial_layer": [
|
|
||||||
"200"
|
|
||||||
],
|
|
||||||
"full_fan_speed_layer": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"fan_max_speed": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"fan_min_speed": [
|
|
||||||
"35"
|
|
||||||
],
|
|
||||||
"slow_down_min_speed": [
|
|
||||||
"10"
|
|
||||||
],
|
|
||||||
"slow_down_layer_time": [
|
|
||||||
"8"
|
|
||||||
],
|
|
||||||
"filament_start_gcode": [
|
|
||||||
"; Filament gcode\n"
|
|
||||||
],
|
|
||||||
"nozzle_temperature": [
|
|
||||||
"200"
|
|
||||||
],
|
|
||||||
"temperature_vitrification": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"filament_loading_speed_start": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"filament_loading_speed": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"filament_unloading_speed_start": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"filament_unloading_speed": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"filament_cooling_moves": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"filament_cooling_initial_speed": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"filament_cooling_final_speed": [
|
|
||||||
"0"
|
|
||||||
]
|
|
||||||
}
|
}
|
||||||
@@ -4,91 +4,7 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"inherits": "fdm_filament_common",
|
"inherits": "fdm_filament_common",
|
||||||
"pressure_advance": [
|
|
||||||
"0.096"
|
|
||||||
],
|
|
||||||
"cool_plate_temp": [
|
|
||||||
"115"
|
|
||||||
],
|
|
||||||
"eng_plate_temp": [
|
|
||||||
"115"
|
|
||||||
],
|
|
||||||
"hot_plate_temp": [
|
|
||||||
"115"
|
|
||||||
],
|
|
||||||
"textured_plate_temp": [
|
|
||||||
"115"
|
|
||||||
],
|
|
||||||
"cool_plate_temp_initial_layer": [
|
|
||||||
"113"
|
|
||||||
],
|
|
||||||
"eng_plate_temp_initial_layer": [
|
|
||||||
"113"
|
|
||||||
],
|
|
||||||
"hot_plate_temp_initial_layer": [
|
|
||||||
"113"
|
|
||||||
],
|
|
||||||
"textured_plate_temp_initial_layer": [
|
|
||||||
"113"
|
|
||||||
],
|
|
||||||
"slow_down_for_layer_cooling": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"close_fan_the_first_x_layers": [
|
|
||||||
"3"
|
|
||||||
],
|
|
||||||
"fan_cooling_layer_time": [
|
|
||||||
"30"
|
|
||||||
],
|
|
||||||
"slow_down_layer_time": [
|
|
||||||
"2"
|
|
||||||
],
|
|
||||||
"filament_max_volumetric_speed": [
|
|
||||||
"12"
|
|
||||||
],
|
|
||||||
"filament_type": [
|
"filament_type": [
|
||||||
"PC"
|
"PC"
|
||||||
],
|
|
||||||
"filament_density": [
|
|
||||||
"1.04"
|
|
||||||
],
|
|
||||||
"filament_cost": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_initial_layer": [
|
|
||||||
"260"
|
|
||||||
],
|
|
||||||
"reduce_fan_stop_start_freq": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"fan_max_speed": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"fan_min_speed": [
|
|
||||||
"10"
|
|
||||||
],
|
|
||||||
"overhang_fan_speed": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"overhang_fan_threshold": [
|
|
||||||
"25%"
|
|
||||||
],
|
|
||||||
"support_material_interface_fan_speed": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"nozzle_temperature": [
|
|
||||||
"260"
|
|
||||||
],
|
|
||||||
"temperature_vitrification": [
|
|
||||||
"120"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_low": [
|
|
||||||
"260"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_high": [
|
|
||||||
"280"
|
|
||||||
],
|
|
||||||
"filament_start_gcode": [
|
|
||||||
"; filament start gcode\n"
|
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -4,79 +4,7 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"inherits": "fdm_filament_common",
|
"inherits": "fdm_filament_common",
|
||||||
"filament_density": [
|
|
||||||
"1.27"
|
|
||||||
],
|
|
||||||
"filament_cost": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"temperature_vitrification": [
|
|
||||||
"70"
|
|
||||||
],
|
|
||||||
"close_fan_the_first_x_layers": [
|
|
||||||
"3"
|
|
||||||
],
|
|
||||||
"enable_overhang_bridge_fan": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"fan_cooling_layer_time": [
|
|
||||||
"30"
|
|
||||||
],
|
|
||||||
"fan_max_speed": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"fan_min_speed": [
|
|
||||||
"80"
|
|
||||||
],
|
|
||||||
"filament_diameter": [
|
|
||||||
"2.85"
|
|
||||||
],
|
|
||||||
"filament_flow_ratio": [
|
|
||||||
"0.91"
|
|
||||||
],
|
|
||||||
"filament_max_volumetric_speed": [
|
|
||||||
"9.5"
|
|
||||||
],
|
|
||||||
"filament_minimal_purge_on_wipe_tower": [
|
|
||||||
"15"
|
|
||||||
],
|
|
||||||
"filament_type": [
|
"filament_type": [
|
||||||
"PETG"
|
"PETG"
|
||||||
],
|
|
||||||
"hot_plate_temp": [
|
|
||||||
"70"
|
|
||||||
],
|
|
||||||
"hot_plate_temp_initial_layer": [
|
|
||||||
"70"
|
|
||||||
],
|
|
||||||
"nozzle_temperature": [
|
|
||||||
"250"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_initial_layer": [
|
|
||||||
"250"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_low": [
|
|
||||||
"230"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_high": [
|
|
||||||
"250"
|
|
||||||
],
|
|
||||||
"overhang_fan_threshold": [
|
|
||||||
"95%"
|
|
||||||
],
|
|
||||||
"pressure_advance": [
|
|
||||||
"0.205"
|
|
||||||
],
|
|
||||||
"reduce_fan_stop_start_freq": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"slow_down_layer_time": [
|
|
||||||
"8"
|
|
||||||
],
|
|
||||||
"slow_down_min_speed": [
|
|
||||||
"10"
|
|
||||||
],
|
|
||||||
"support_material_interface_fan_speed": [
|
|
||||||
"100"
|
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -4,97 +4,7 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"inherits": "fdm_filament_common",
|
"inherits": "fdm_filament_common",
|
||||||
"filament_flow_ratio": [
|
|
||||||
"0.91"
|
|
||||||
],
|
|
||||||
"pressure_advance": [
|
|
||||||
"0.11"
|
|
||||||
],
|
|
||||||
"fan_cooling_layer_time": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"filament_max_volumetric_speed": [
|
|
||||||
"12"
|
|
||||||
],
|
|
||||||
"filament_type": [
|
"filament_type": [
|
||||||
"PLA"
|
"PLA"
|
||||||
],
|
|
||||||
"filament_density": [
|
|
||||||
"1.24"
|
|
||||||
],
|
|
||||||
"filament_cost": [
|
|
||||||
"20"
|
|
||||||
],
|
|
||||||
"cool_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"eng_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"hot_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"textured_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"cool_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"eng_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"hot_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"textured_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_initial_layer": [
|
|
||||||
"220"
|
|
||||||
],
|
|
||||||
"reduce_fan_stop_start_freq": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"slow_down_for_layer_cooling": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"fan_max_speed": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"fan_min_speed": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"overhang_fan_speed": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"overhang_fan_threshold": [
|
|
||||||
"0%"
|
|
||||||
],
|
|
||||||
"close_fan_the_first_x_layers": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"nozzle_temperature": [
|
|
||||||
"220"
|
|
||||||
],
|
|
||||||
"temperature_vitrification": [
|
|
||||||
"45"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_low": [
|
|
||||||
"190"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_high": [
|
|
||||||
"230"
|
|
||||||
],
|
|
||||||
"slow_down_min_speed": [
|
|
||||||
"10"
|
|
||||||
],
|
|
||||||
"slow_down_layer_time": [
|
|
||||||
"4"
|
|
||||||
],
|
|
||||||
"additional_cooling_fan_speed": [
|
|
||||||
"70"
|
|
||||||
],
|
|
||||||
"filament_start_gcode": [
|
|
||||||
"; filament start gcode\n"
|
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
+89
-70
@@ -1,94 +1,113 @@
|
|||||||
{
|
{
|
||||||
"type": "filament",
|
"type": "filament",
|
||||||
"name": "fdm_filament_abs",
|
"filament_id": "GFG01",
|
||||||
|
"setting_id": "GFSG01",
|
||||||
|
"name": "re3D Greengate rPETG @0.8 nozzle",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "false",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_common",
|
"inherits": "fdm_filament_pet",
|
||||||
"fan_cooling_layer_time": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"filament_max_volumetric_speed": [
|
|
||||||
"12"
|
|
||||||
],
|
|
||||||
"filament_type": [
|
|
||||||
"ABS"
|
|
||||||
],
|
|
||||||
"filament_density": [
|
|
||||||
"1.24"
|
|
||||||
],
|
|
||||||
"filament_cost": [
|
|
||||||
"20"
|
|
||||||
],
|
|
||||||
"cool_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"eng_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"hot_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"textured_plate_temp": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"cool_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"eng_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"hot_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"textured_plate_temp_initial_layer": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_initial_layer": [
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
"220"
|
"220"
|
||||||
],
|
],
|
||||||
"reduce_fan_stop_start_freq": [
|
"nozzle_temperature_range_high": [
|
||||||
"1"
|
"260"
|
||||||
],
|
],
|
||||||
"slow_down_for_layer_cooling": [
|
"hot_plate_temp_initial_layer": [
|
||||||
"1"
|
"70"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1.0"
|
||||||
|
],
|
||||||
|
"enable_pressure_advance": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M190 S75\nM104 S220 T0\nM104 S210 T1\nM104 S200 T2\nM109 S220 T0\nM109 S210 T1\nM109 S200 T2"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.27"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"2.85"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"cool_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"cool_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"eng_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"eng_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
],
|
],
|
||||||
"fan_max_speed": [
|
"fan_max_speed": [
|
||||||
"100"
|
"100"
|
||||||
],
|
],
|
||||||
"fan_min_speed": [
|
"fan_min_speed": [
|
||||||
"100"
|
"30"
|
||||||
],
|
],
|
||||||
"overhang_fan_speed": [
|
"fan_cooling_layer_time": [
|
||||||
"100"
|
"20"
|
||||||
|
],
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"2"
|
||||||
],
|
],
|
||||||
"overhang_fan_threshold": [
|
"overhang_fan_threshold": [
|
||||||
"50%"
|
"95%"
|
||||||
],
|
],
|
||||||
"close_fan_the_first_x_layers": [
|
"overhang_fan_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"enable_overhang_bridge_fan": [
|
||||||
"1"
|
"1"
|
||||||
],
|
],
|
||||||
"nozzle_temperature": [
|
"slow_down_for_layer_cooling": [
|
||||||
"220"
|
"1"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.205"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
],
|
],
|
||||||
"temperature_vitrification": [
|
"temperature_vitrification": [
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_low": [
|
|
||||||
"190"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_high": [
|
|
||||||
"230"
|
|
||||||
],
|
|
||||||
"slow_down_min_speed": [
|
|
||||||
"10"
|
|
||||||
],
|
|
||||||
"slow_down_layer_time": [
|
|
||||||
"4"
|
|
||||||
],
|
|
||||||
"additional_cooling_fan_speed": [
|
|
||||||
"70"
|
"70"
|
||||||
],
|
],
|
||||||
"filament_start_gcode": [
|
"support_material_interface_fan_speed": [
|
||||||
"; filament start gcode\n"
|
"100"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D GigabotX 2 0.8 nozzle",
|
||||||
|
"re3D GigabotX 2 XLT 0.8 nozzle",
|
||||||
|
"re3D TerabotX 2 0.8 nozzle"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -0,0 +1,113 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"filament_id": "GFG01",
|
||||||
|
"setting_id": "GFSG01_175",
|
||||||
|
"name": "re3D Greengate rPETG @1.75 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"inherits": "fdm_filament_pet",
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1.0"
|
||||||
|
],
|
||||||
|
"enable_pressure_advance": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"M190 S75\nM104 S220 T0\nM104 S210 T1\nM104 S200 T2\nM109 S220 T0\nM109 S210 T1\nM109 S200 T2"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.27"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"2.85"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"cool_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"cool_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"eng_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"eng_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"95%"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"enable_overhang_bridge_fan": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_for_layer_cooling": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.205"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"temperature_vitrification": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"support_material_interface_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D GigabotX 2 1.75 nozzle",
|
||||||
|
"re3D GigabotX 2 XLT 1.75 nozzle",
|
||||||
|
"re3D TerabotX 2 1.75 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@@ -1,47 +1,20 @@
|
|||||||
{
|
{
|
||||||
"type": "filament",
|
"type": "filament",
|
||||||
"filament_id": "GFG99",
|
|
||||||
"setting_id": "GFSG99",
|
|
||||||
"name": "re3D Greengate rPETG",
|
"name": "re3D Greengate rPETG",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pet",
|
"inherits": "fdm_filament_pet",
|
||||||
"nozzle_temperature_initial_layer": [
|
"filament_id": "GFG01",
|
||||||
"255"
|
"setting_id": "re3d_greengate_rpetg",
|
||||||
],
|
"filament_settings_id": [
|
||||||
"nozzle_temperature": [
|
"re3D Greengate rPETG"
|
||||||
"255"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_low": [
|
|
||||||
"220"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_high": [
|
|
||||||
"260"
|
|
||||||
],
|
|
||||||
"hot_plate_temp_initial_layer": [
|
|
||||||
"80"
|
|
||||||
],
|
|
||||||
"hot_plate_temp": [
|
|
||||||
"80"
|
|
||||||
],
|
|
||||||
"filament_flow_ratio": [
|
|
||||||
"1.02"
|
|
||||||
],
|
|
||||||
"enable_pressure_advance": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"slow_down_layer_time": [
|
|
||||||
"20"
|
|
||||||
],
|
|
||||||
"slow_down_min_speed": [
|
|
||||||
"25"
|
|
||||||
],
|
|
||||||
"filament_start_gcode": [
|
|
||||||
"M190 S75\nM104 S220 T0\nM104 S210 T1\nM104 S200 T2\nM109 S220 T0\nM109 S210 T1\nM109 S200 T2"
|
|
||||||
],
|
],
|
||||||
"compatible_printers": [
|
"compatible_printers": [
|
||||||
"re3D Gigabot X2 1.75 nozzle",
|
"re3D GigabotX 2",
|
||||||
"re3D Gigabot X2 XLT 1.75 nozzle",
|
"re3D GigabotX 2 XLT",
|
||||||
"re3D Terabot X2 1.75 nozzle"
|
"re3D TerabotX 2"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"re3D"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -0,0 +1,173 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"name": "re3D PC @0.4 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"inherits": "fdm_filament_pc",
|
||||||
|
"filament_id": "GFG99",
|
||||||
|
"setting_id": "re3d_pc_04",
|
||||||
|
"filament_settings_id": [
|
||||||
|
"re3D PC @0.4 nozzle"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D Gigabot 4 0.4 nozzle",
|
||||||
|
"re3D Gigabot 4 XLT 0.4 nozzle",
|
||||||
|
"re3D Terabot 4 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"re3D"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.19"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"2.85"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"0.99"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"11.5"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"113"
|
||||||
|
],
|
||||||
|
"cool_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"cool_plate_temp_initial_layer": [
|
||||||
|
"113"
|
||||||
|
],
|
||||||
|
"eng_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"eng_plate_temp_initial_layer": [
|
||||||
|
"113"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"113"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"50%"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"enable_overhang_bridge_fan": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_for_layer_cooling": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.096"
|
||||||
|
],
|
||||||
|
"enable_pressure_advance": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_retraction_length": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"support_material_interface_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_volume": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_flow": [
|
||||||
|
"10.5"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_dist": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_length": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_ironing_area": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_purge_volume": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_print_temp": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_toolchange_delay": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_moves": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_initial_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_final_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_distance": [
|
||||||
|
"0"
|
||||||
|
]
|
||||||
|
}
|
||||||
@@ -0,0 +1,173 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"name": "re3D PC @0.8 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"inherits": "fdm_filament_pc",
|
||||||
|
"filament_id": "GFG99",
|
||||||
|
"setting_id": "re3d_pc_08",
|
||||||
|
"filament_settings_id": [
|
||||||
|
"re3D PC @0.8 nozzle"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D Gigabot 4 0.8 nozzle",
|
||||||
|
"re3D Gigabot 4 XLT 0.8 nozzle",
|
||||||
|
"re3D Terabot 4 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"re3D"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.19"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"2.85"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"0.99"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"11.5"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"113"
|
||||||
|
],
|
||||||
|
"cool_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"cool_plate_temp_initial_layer": [
|
||||||
|
"113"
|
||||||
|
],
|
||||||
|
"eng_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"eng_plate_temp_initial_layer": [
|
||||||
|
"113"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"115"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"113"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"50%"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"enable_overhang_bridge_fan": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_for_layer_cooling": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.096"
|
||||||
|
],
|
||||||
|
"enable_pressure_advance": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_retraction_length": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"support_material_interface_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_volume": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_flow": [
|
||||||
|
"10.5"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_dist": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_length": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_ironing_area": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_purge_volume": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_print_temp": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_toolchange_delay": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_moves": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_initial_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_final_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_distance": [
|
||||||
|
"0"
|
||||||
|
]
|
||||||
|
}
|
||||||
@@ -1,17 +1,20 @@
|
|||||||
{
|
{
|
||||||
"type": "filament",
|
"type": "filament",
|
||||||
"filament_id": "GFG99",
|
|
||||||
"setting_id": "GFSG99",
|
|
||||||
"name": "re3D PC",
|
"name": "re3D PC",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pc",
|
"inherits": "fdm_filament_pc",
|
||||||
|
"filament_id": "GFG99",
|
||||||
|
"setting_id": "re3d_pc",
|
||||||
|
"filament_settings_id": [
|
||||||
|
"re3D PC"
|
||||||
|
],
|
||||||
"compatible_printers": [
|
"compatible_printers": [
|
||||||
"re3D Gigabot 4 0.4 nozzle",
|
"re3D Gigabot 4",
|
||||||
"re3D Gigabot 4 XLT 0.4 nozzle",
|
"re3D Gigabot 4 XLT",
|
||||||
"re3D Terabot 4 0.4 nozzle",
|
"re3D Terabot 4"
|
||||||
"re3D Gigabot 4 0.8 nozzle",
|
],
|
||||||
"re3D Gigabot 4 XLT 0.8 nozzle",
|
"filament_vendor": [
|
||||||
"re3D Terabot 4 0.8 nozzle"
|
"re3D"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -0,0 +1,173 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"name": "re3D PETG @0.4 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"inherits": "fdm_filament_pet",
|
||||||
|
"filament_id": "GFG03",
|
||||||
|
"setting_id": "re3d_petg_04",
|
||||||
|
"filament_settings_id": [
|
||||||
|
"re3D PETG @0.4 nozzle"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D Gigabot 4 0.4 nozzle",
|
||||||
|
"re3D Gigabot 4 XLT 0.4 nozzle",
|
||||||
|
"re3D Terabot 4 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"re3D"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.27"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"2.85"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"0.99"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"10.5"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"cool_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"cool_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"eng_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"eng_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"50%"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"enable_overhang_bridge_fan": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_for_layer_cooling": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.205"
|
||||||
|
],
|
||||||
|
"enable_pressure_advance": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"support_material_interface_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_volume": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_flow": [
|
||||||
|
"10.5"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_dist": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_length": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_ironing_area": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_purge_volume": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_print_temp": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_toolchange_delay": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_moves": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_initial_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_final_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_distance": [
|
||||||
|
"0"
|
||||||
|
]
|
||||||
|
}
|
||||||
@@ -0,0 +1,173 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"name": "re3D PETG @0.8 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"inherits": "fdm_filament_pet",
|
||||||
|
"filament_id": "GFG03",
|
||||||
|
"setting_id": "re3d_petg_08",
|
||||||
|
"filament_settings_id": [
|
||||||
|
"re3D PETG @0.8 nozzle"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D Gigabot 4 0.8 nozzle",
|
||||||
|
"re3D Gigabot 4 XLT 0.8 nozzle",
|
||||||
|
"re3D Terabot 4 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"re3D"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.27"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"2.85"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"0.99"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"10.5"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"cool_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"cool_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"eng_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"eng_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"50%"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"enable_overhang_bridge_fan": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_for_layer_cooling": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.205"
|
||||||
|
],
|
||||||
|
"enable_pressure_advance": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"support_material_interface_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_volume": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_flow": [
|
||||||
|
"10.5"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_dist": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_length": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_ironing_area": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_purge_volume": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_print_temp": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_toolchange_delay": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_moves": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_initial_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_final_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_distance": [
|
||||||
|
"0"
|
||||||
|
]
|
||||||
|
}
|
||||||
@@ -1,26 +1,20 @@
|
|||||||
{
|
{
|
||||||
"type": "filament",
|
"type": "filament",
|
||||||
"filament_id": "GFG99",
|
|
||||||
"setting_id": "GFSG99",
|
|
||||||
"name": "re3D PETG",
|
"name": "re3D PETG",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pet",
|
"inherits": "fdm_filament_pet",
|
||||||
"filament_start_gcode": [
|
"filament_id": "GFG03",
|
||||||
"; Filament gcode"
|
"setting_id": "re3d_petg",
|
||||||
],
|
"filament_settings_id": [
|
||||||
"filament_end_gcode": [
|
"re3D PETG"
|
||||||
"; filament end gcode"
|
|
||||||
],
|
|
||||||
"filament_retraction_length": [
|
|
||||||
"1"
|
|
||||||
],
|
],
|
||||||
"compatible_printers": [
|
"compatible_printers": [
|
||||||
"re3D Gigabot 4 0.4 nozzle",
|
"re3D Gigabot 4",
|
||||||
"re3D Gigabot 4 XLT 0.4 nozzle",
|
"re3D Gigabot 4 XLT",
|
||||||
"re3D Terabot 4 0.4 nozzle",
|
"re3D Terabot 4"
|
||||||
"re3D Gigabot 4 0.8 nozzle",
|
],
|
||||||
"re3D Gigabot 4 XLT 0.8 nozzle",
|
"filament_vendor": [
|
||||||
"re3D Terabot 4 0.8 nozzle"
|
"re3D"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -0,0 +1,174 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"name": "re3D PLA @0.4 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"inherits": "fdm_filament_pla",
|
||||||
|
"filament_id": "GFL99",
|
||||||
|
"setting_id": "re3d_pla_04",
|
||||||
|
"filament_settings_id": [
|
||||||
|
"re3D PLA @0.4 nozzle"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D Gigabot 4 0.4 nozzle",
|
||||||
|
"re3D Gigabot 4 XLT 0.4 nozzle",
|
||||||
|
"re3D Terabot 4 0.4 nozzle"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"re3D"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": "2",
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"2.85"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"0.99"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"12"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"cool_plate_temp": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"cool_plate_temp_initial_layer": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"eng_plate_temp": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"eng_plate_temp_initial_layer": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"0%"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"enable_overhang_bridge_fan": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_for_layer_cooling": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.096"
|
||||||
|
],
|
||||||
|
"enable_pressure_advance": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"temperature_vitrification": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"support_material_interface_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_volume": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_flow": [
|
||||||
|
"10.5"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_dist": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_length": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_ironing_area": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_purge_volume": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_print_temp": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_toolchange_delay": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_moves": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_initial_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_final_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_distance": [
|
||||||
|
"0"
|
||||||
|
]
|
||||||
|
}
|
||||||
@@ -0,0 +1,174 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"name": "re3D PLA @0.8 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"inherits": "fdm_filament_pla",
|
||||||
|
"filament_id": "GFL99",
|
||||||
|
"setting_id": "re3d_pla_08",
|
||||||
|
"filament_settings_id": [
|
||||||
|
"re3D PLA @0.8 nozzle"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D Gigabot 4 0.8 nozzle",
|
||||||
|
"re3D Gigabot 4 XLT 0.8 nozzle",
|
||||||
|
"re3D Terabot 4 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"re3D"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": "2",
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_diameter": [
|
||||||
|
"2.85"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"0.99"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"12"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"cool_plate_temp": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"cool_plate_temp_initial_layer": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"eng_plate_temp": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"eng_plate_temp_initial_layer": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"textured_plate_temp": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"textured_plate_temp_initial_layer": [
|
||||||
|
"65"
|
||||||
|
],
|
||||||
|
"fan_max_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"fan_min_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"fan_cooling_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"full_fan_speed_layer": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"0%"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"enable_overhang_bridge_fan": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_for_layer_cooling": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.096"
|
||||||
|
],
|
||||||
|
"enable_pressure_advance": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"reduce_fan_stop_start_freq": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"temperature_vitrification": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"support_material_interface_fan_speed": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"filament_soluble": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_volume": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"filament_multitool_ramming_flow": [
|
||||||
|
"10.5"
|
||||||
|
],
|
||||||
|
"filament_minimal_purge_on_wipe_tower": [
|
||||||
|
"15"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_dist": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_pre_extrusion_length": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_ironing_area": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_purge_volume": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_tower_interface_print_temp": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed_start": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_unloading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_toolchange_delay": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_moves": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_initial_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_cooling_final_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_loading_speed": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"filament_stamping_distance": [
|
||||||
|
"0"
|
||||||
|
]
|
||||||
|
}
|
||||||
@@ -1,17 +1,20 @@
|
|||||||
{
|
{
|
||||||
"type": "filament",
|
"type": "filament",
|
||||||
"filament_id": "GFL99",
|
|
||||||
"setting_id": "GFSL99",
|
|
||||||
"name": "re3D PLA",
|
"name": "re3D PLA",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pla",
|
"inherits": "fdm_filament_pla",
|
||||||
|
"filament_id": "GFL99",
|
||||||
|
"setting_id": "re3d_pla",
|
||||||
|
"filament_settings_id": [
|
||||||
|
"re3D PLA"
|
||||||
|
],
|
||||||
"compatible_printers": [
|
"compatible_printers": [
|
||||||
"re3D Gigabot 4 0.4 nozzle",
|
"re3D Gigabot 4",
|
||||||
"re3D Gigabot 4 XLT 0.4 nozzle",
|
"re3D Gigabot 4 XLT",
|
||||||
"re3D Terabot 4 0.4 nozzle",
|
"re3D Terabot 4"
|
||||||
"re3D Gigabot 4 0.8 nozzle",
|
],
|
||||||
"re3D Gigabot 4 XLT 0.8 nozzle",
|
"filament_vendor": [
|
||||||
"re3D Terabot 4 0.8 nozzle"
|
"re3D"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -0,0 +1,65 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"filament_id": "GFG02",
|
||||||
|
"setting_id": "GFSG02",
|
||||||
|
"name": "re3D rPP @0.8 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"inherits": "fdm_filament_pet",
|
||||||
|
"filament_type": [
|
||||||
|
"PP"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"re3D"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"default_filament_colour": [
|
||||||
|
"#FFFFFF"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"0.675"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"190"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"190"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"180"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"280"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1.1"
|
||||||
|
],
|
||||||
|
"enable_pressure_advance": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"; filament start gcode\nM190 S110\nM104 S190 T0\nM104 S185 T1\nM104 S170 T2\nM109 S190 T0\nM109 S185 T1\nM109 S170 T2\n"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D GigabotX 2 0.8 nozzle",
|
||||||
|
"re3D GigabotX 2 XLT 0.8 nozzle",
|
||||||
|
"re3D TerabotX 2 0.8 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@@ -0,0 +1,65 @@
|
|||||||
|
{
|
||||||
|
"type": "filament",
|
||||||
|
"filament_id": "GFG02",
|
||||||
|
"setting_id": "GFSG02_175",
|
||||||
|
"name": "re3D rPP @1.75 nozzle",
|
||||||
|
"from": "system",
|
||||||
|
"instantiation": "true",
|
||||||
|
"inherits": "fdm_filament_pet",
|
||||||
|
"filament_type": [
|
||||||
|
"PP"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"re3D"
|
||||||
|
],
|
||||||
|
"close_fan_the_first_x_layers": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"default_filament_colour": [
|
||||||
|
"#FFFFFF"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"0.675"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"185"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"185"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"180"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"280"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"110"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"1.15"
|
||||||
|
],
|
||||||
|
"enable_pressure_advance": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"filament_start_gcode": [
|
||||||
|
"; filament start gcode\nM190 S110\nM104 S185 T0\nM104 S185 T1\nM104 S185 T2\nM109 S185 T0\nM109 S185 T1\nM109 S185 T2\n"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D GigabotX 2 1.75 nozzle",
|
||||||
|
"re3D GigabotX 2 XLT 1.75 nozzle",
|
||||||
|
"re3D TerabotX 2 1.75 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@@ -1,7 +1,5 @@
|
|||||||
{
|
{
|
||||||
"type": "filament",
|
"type": "filament",
|
||||||
"filament_id": "GFG99",
|
|
||||||
"setting_id": "GFSG99",
|
|
||||||
"name": "re3D rPP",
|
"name": "re3D rPP",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
@@ -9,42 +7,17 @@
|
|||||||
"filament_type": [
|
"filament_type": [
|
||||||
"PP"
|
"PP"
|
||||||
],
|
],
|
||||||
"nozzle_temperature_initial_layer": [
|
"filament_id": "GFG02",
|
||||||
"185"
|
"setting_id": "re3d_rpp",
|
||||||
],
|
"filament_settings_id": [
|
||||||
"nozzle_temperature": [
|
"re3D rPP"
|
||||||
"185"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_low": [
|
|
||||||
"180"
|
|
||||||
],
|
|
||||||
"nozzle_temperature_range_high": [
|
|
||||||
"200"
|
|
||||||
],
|
|
||||||
"hot_plate_temp_initial_layer": [
|
|
||||||
"110"
|
|
||||||
],
|
|
||||||
"hot_plate_temp": [
|
|
||||||
"110"
|
|
||||||
],
|
|
||||||
"filament_flow_ratio": [
|
|
||||||
"1.18"
|
|
||||||
],
|
|
||||||
"enable_pressure_advance": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"slow_down_layer_time": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"slow_down_min_speed": [
|
|
||||||
"10"
|
|
||||||
],
|
|
||||||
"filament_start_gcode": [
|
|
||||||
"M190 S110\nM104 S185 T0\nM104 S185 T1\nM104 S185 T2\nM109 S185 T0\nM109 S185 T1\nM109 S185 T2"
|
|
||||||
],
|
],
|
||||||
"compatible_printers": [
|
"compatible_printers": [
|
||||||
"re3D Gigabot X2 1.75 nozzle",
|
"re3D GigabotX 2",
|
||||||
"re3D Gigabot X2 XLT 1.75 nozzle",
|
"re3D GigabotX 2 XLT",
|
||||||
"re3D Terabot X2 1.75 nozzle"
|
"re3D TerabotX 2"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"re3D"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -3,115 +3,11 @@
|
|||||||
"name": "fdm_machine_common",
|
"name": "fdm_machine_common",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"printer_technology": "FFF",
|
"auxiliary_fan": "0",
|
||||||
"deretraction_speed": [
|
"bed_exclude_area": ["0x0"],
|
||||||
"40"
|
"family": "re3D",
|
||||||
],
|
|
||||||
"extruder_colour": [
|
|
||||||
"#FCE94F"
|
|
||||||
],
|
|
||||||
"extruder_offset": [
|
|
||||||
"0x0"
|
|
||||||
],
|
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
|
"emit_machine_limits_to_gcode": "0",
|
||||||
"silent_mode": "0",
|
"silent_mode": "0",
|
||||||
"machine_max_acceleration_e": [
|
"scan_first_layer": "0"
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_extruding": [
|
|
||||||
"10000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_retracting": [
|
|
||||||
"1000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_x": [
|
|
||||||
"10000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_y": [
|
|
||||||
"10000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_z": [
|
|
||||||
"100"
|
|
||||||
],
|
|
||||||
"machine_max_speed_e": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"machine_max_speed_x": [
|
|
||||||
"500"
|
|
||||||
],
|
|
||||||
"machine_max_speed_y": [
|
|
||||||
"500"
|
|
||||||
],
|
|
||||||
"machine_max_speed_z": [
|
|
||||||
"10"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_e": [
|
|
||||||
"5"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_x": [
|
|
||||||
"8"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_y": [
|
|
||||||
"8"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_z": [
|
|
||||||
"0.4"
|
|
||||||
],
|
|
||||||
"machine_min_extruding_rate": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"machine_min_travel_rate": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"max_layer_height": [
|
|
||||||
"0.4"
|
|
||||||
],
|
|
||||||
"min_layer_height": [
|
|
||||||
"0.1"
|
|
||||||
],
|
|
||||||
"printable_height": "400",
|
|
||||||
"extruder_clearance_radius": "65",
|
|
||||||
"extruder_clearance_height_to_rod": "36",
|
|
||||||
"extruder_clearance_height_to_lid": "140",
|
|
||||||
"nozzle_diameter": [
|
|
||||||
"0.4"
|
|
||||||
],
|
|
||||||
"printer_settings_id": "",
|
|
||||||
"printer_variant": "0.4",
|
|
||||||
"retraction_minimum_travel": [
|
|
||||||
"2"
|
|
||||||
],
|
|
||||||
"retract_before_wipe": [
|
|
||||||
"70%"
|
|
||||||
],
|
|
||||||
"retract_when_changing_layer": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"retraction_length": [
|
|
||||||
"5"
|
|
||||||
],
|
|
||||||
"retract_length_toolchange": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"z_hop": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"retract_restart_extra": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"retract_restart_extra_toolchange": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"retraction_speed": [
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"single_extruder_multi_material": "1",
|
|
||||||
"change_filament_gcode": "",
|
|
||||||
"wipe": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"z_lift_type": "NormalLift",
|
|
||||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
|
||||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
|
||||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
|
||||||
}
|
}
|
||||||
@@ -1,146 +1,131 @@
|
|||||||
{
|
{
|
||||||
"type": "machine",
|
|
||||||
"name": "fdm_re3D_common",
|
|
||||||
"from": "system",
|
|
||||||
"instantiation": "false",
|
|
||||||
"inherits": "fdm_machine_common",
|
|
||||||
"gcode_flavor": "klipper",
|
|
||||||
"machine_max_acceleration_e": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_extruding": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_retracting": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_travel": [
|
|
||||||
"20000",
|
|
||||||
"20000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_x": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_y": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_z": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_speed_e": [
|
|
||||||
"20",
|
|
||||||
"20"
|
|
||||||
],
|
|
||||||
"machine_max_speed_x": [
|
|
||||||
"500",
|
|
||||||
"500"
|
|
||||||
],
|
|
||||||
"machine_max_speed_y": [
|
|
||||||
"500",
|
|
||||||
"500"
|
|
||||||
],
|
|
||||||
"machine_max_speed_z": [
|
|
||||||
"20",
|
|
||||||
"20"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_e": [
|
|
||||||
"2.5",
|
|
||||||
"2.5"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_x": [
|
|
||||||
"9",
|
|
||||||
"9"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_y": [
|
|
||||||
"9",
|
|
||||||
"9"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_z": [
|
|
||||||
"0.2",
|
|
||||||
"0.2"
|
|
||||||
],
|
|
||||||
"machine_min_extruding_rate": [
|
|
||||||
"0",
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"machine_min_travel_rate": [
|
|
||||||
"0",
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"max_layer_height": [
|
|
||||||
"0.32"
|
|
||||||
],
|
|
||||||
"min_layer_height": [
|
|
||||||
"0.2"
|
|
||||||
],
|
|
||||||
"extruder_clearance_radius": "125",
|
|
||||||
"extruder_clearance_height_to_rod": "25",
|
|
||||||
"printer_settings_id": "",
|
|
||||||
"printer_technology": "FFF",
|
|
||||||
"printer_variant": "0.4",
|
|
||||||
"retraction_minimum_travel": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"retract_before_wipe": [
|
|
||||||
"70%"
|
|
||||||
],
|
|
||||||
"retract_when_changing_layer": [
|
|
||||||
"1"
|
|
||||||
],
|
|
||||||
"retraction_length": [
|
|
||||||
"1.0"
|
|
||||||
],
|
|
||||||
"retract_length_toolchange": [
|
|
||||||
"12"
|
|
||||||
],
|
|
||||||
"z_hop": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"retract_restart_extra": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"retract_restart_extra_toolchange": [
|
|
||||||
"-0.08"
|
|
||||||
],
|
|
||||||
"retraction_speed": [
|
|
||||||
"200"
|
|
||||||
],
|
|
||||||
"deretraction_speed": [
|
|
||||||
"200"
|
|
||||||
],
|
|
||||||
"z_hop_types": "Normal Lift",
|
|
||||||
"silent_mode": "0",
|
|
||||||
"single_extruder_multi_material": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"machine_tool_change_time": [
|
|
||||||
"30"
|
|
||||||
],
|
|
||||||
"change_filament_gcode": "",
|
|
||||||
"machine_pause_gcode": "PAUSE",
|
|
||||||
"wipe": [
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"default_filament_profile": [
|
|
||||||
""
|
|
||||||
],
|
|
||||||
"default_print_profile": "",
|
|
||||||
"bed_exclude_area": [
|
"bed_exclude_area": [
|
||||||
"0x0"
|
"0x0"
|
||||||
],
|
],
|
||||||
"machine_start_gcode": "M220 S100\nM221 S100\nG28\nG92 E0\nG1 Z0.3 F200\n",
|
"instantiation": "false",
|
||||||
"machine_end_gcode": "M104 S0 T0\nM104 S0 T1\nM140 S0\n\nG28 X Y\nM18\nM107\n",
|
"type": "machine",
|
||||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
"deretraction_speed": [
|
||||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
"30",
|
||||||
"scan_first_layer": "0",
|
"30"
|
||||||
"auxiliary_fan": "0",
|
],
|
||||||
|
"enable_filament_ramming": "1",
|
||||||
|
"extruder_offset": [
|
||||||
|
"0x0",
|
||||||
|
"0x0"
|
||||||
|
],
|
||||||
"extruders_count": [
|
"extruders_count": [
|
||||||
"2"
|
"2"
|
||||||
]
|
],
|
||||||
|
"inherits": "fdm_machine_common",
|
||||||
|
"machine_end_gcode": "G92 E0\nTURN_OFF_HEATERS\nG28 X Y\nM18\nM107",
|
||||||
|
"machine_start_gcode": "M83 ; Use relative extrusion distances\nG28 ; Home all axes\nM140 S{first_layer_bed_temperature[initial_tool]} ; Start heating bed\nM190 S{first_layer_bed_temperature[initial_tool]} ; Wait for bed to reach temperature\n\nT{initial_tool}\n\n\n; ---------------------------\n; HEAT THE USED TOOL\n; ---------------------------\n{if is_extruder_used[initial_tool]}\nM104 T{initial_tool} S{first_layer_temperature[initial_tool]} ; Preheat active extruder to first layer temperature\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]} ; Wait for active extruder to reach temperature\n{endif}\n\nG1 F18000\nG4 S0\nG92 E0",
|
||||||
|
"machine_tool_change_time": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
|
"name": "fdm_re3D_common",
|
||||||
|
"printer_technology": "FFF",
|
||||||
|
"retract_before_wipe": [
|
||||||
|
"70%",
|
||||||
|
"70%"
|
||||||
|
],
|
||||||
|
"retract_length_toolchange": [
|
||||||
|
"12",
|
||||||
|
"12"
|
||||||
|
],
|
||||||
|
"retract_restart_extra": [
|
||||||
|
"0",
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"retract_restart_extra_toolchange": [
|
||||||
|
"-0.08",
|
||||||
|
"-0.08"
|
||||||
|
],
|
||||||
|
"retract_when_changing_layer": [
|
||||||
|
"1",
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"retraction_length": [
|
||||||
|
"1.0",
|
||||||
|
"1.0"
|
||||||
|
],
|
||||||
|
"retraction_minimum_travel": [
|
||||||
|
"1",
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"retraction_speed": [
|
||||||
|
"30",
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"single_extruder_multi_material": "0",
|
||||||
|
"wipe": [
|
||||||
|
"1",
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"z_hop": [
|
||||||
|
"0",
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"z_hop_types": [
|
||||||
|
"Normal Lift",
|
||||||
|
"Normal Lift"
|
||||||
|
],
|
||||||
|
"bed_temperature_formula": "by_first_filament",
|
||||||
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||||
|
"best_object_pos": "0.5,0.5",
|
||||||
|
"cooling_tube_length": "0",
|
||||||
|
"cooling_tube_retraction": "0",
|
||||||
|
"default_nozzle_volume_type": [
|
||||||
|
"Standard",
|
||||||
|
"Standard"
|
||||||
|
],
|
||||||
|
"disable_m73": "0",
|
||||||
|
"extruder_colour": [
|
||||||
|
"#FCE94F",
|
||||||
|
"#FCE94F"
|
||||||
|
],
|
||||||
|
"extruder_type": [
|
||||||
|
"Direct Drive",
|
||||||
|
"Direct Drive"
|
||||||
|
],
|
||||||
|
"extruder_variant_list": [
|
||||||
|
"Direct Drive Standard",
|
||||||
|
"Direct Drive Standard"
|
||||||
|
],
|
||||||
|
"fan_kickstart": "0",
|
||||||
|
"fan_speedup_overhangs": "1",
|
||||||
|
"fan_speedup_time": "0",
|
||||||
|
"host_type": "octoprint",
|
||||||
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||||
|
"machine_pause_gcode": "PAUSE",
|
||||||
|
"machine_unload_filament_time": "0",
|
||||||
|
"manual_filament_change": "0",
|
||||||
|
"master_extruder_id": "1",
|
||||||
|
"physical_extruder_map": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"preferred_orientation": "0",
|
||||||
|
"printer_extruder_id": [
|
||||||
|
"1",
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"printer_extruder_variant": [
|
||||||
|
"Direct Drive Standard",
|
||||||
|
"Direct Drive Standard"
|
||||||
|
],
|
||||||
|
"support_air_filtration": "0",
|
||||||
|
"support_chamber_temp_control": "0",
|
||||||
|
"thumbnails": "48x48/PNG, 300x300/PNG",
|
||||||
|
"thumbnails_format": "PNG",
|
||||||
|
"travel_slope": [
|
||||||
|
"3",
|
||||||
|
"3"
|
||||||
|
],
|
||||||
|
"use_firmware_retraction": "0",
|
||||||
|
"use_relative_e_distances": "1",
|
||||||
|
"wipe_distance": [
|
||||||
|
"1",
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"wipe_tower_type": "type2",
|
||||||
|
"z_offset": "0"
|
||||||
}
|
}
|
||||||
@@ -5,81 +5,6 @@
|
|||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"inherits": "fdm_machine_common",
|
"inherits": "fdm_machine_common",
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
"machine_max_acceleration_e": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_extruding": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_retracting": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_travel": [
|
|
||||||
"20000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_x": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_y": [
|
|
||||||
"5000",
|
|
||||||
"5000"
|
|
||||||
],
|
|
||||||
"machine_max_acceleration_z": [
|
|
||||||
"2000",
|
|
||||||
"2000"
|
|
||||||
],
|
|
||||||
"machine_max_speed_e": [
|
|
||||||
"60",
|
|
||||||
"60"
|
|
||||||
],
|
|
||||||
"machine_max_speed_x": [
|
|
||||||
"500",
|
|
||||||
"500"
|
|
||||||
],
|
|
||||||
"machine_max_speed_y": [
|
|
||||||
"500",
|
|
||||||
"500"
|
|
||||||
],
|
|
||||||
"machine_max_speed_z": [
|
|
||||||
"20",
|
|
||||||
"20"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_e": [
|
|
||||||
"2.5",
|
|
||||||
"2.5"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_x": [
|
|
||||||
"9",
|
|
||||||
"9"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_y": [
|
|
||||||
"9",
|
|
||||||
"9"
|
|
||||||
],
|
|
||||||
"machine_max_jerk_z": [
|
|
||||||
"0.2",
|
|
||||||
"0.2"
|
|
||||||
],
|
|
||||||
"machine_min_extruding_rate": [
|
|
||||||
"0",
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"machine_min_travel_rate": [
|
|
||||||
"0",
|
|
||||||
"0"
|
|
||||||
],
|
|
||||||
"max_layer_height": [
|
|
||||||
"2.25"
|
|
||||||
],
|
|
||||||
"min_layer_height": [
|
|
||||||
"0.3"
|
|
||||||
],
|
|
||||||
"extruder_clearance_radius": "70",
|
|
||||||
"printer_settings_id": "",
|
"printer_settings_id": "",
|
||||||
"printer_technology": "FFF",
|
"printer_technology": "FFF",
|
||||||
"purge_in_prime_tower": "0",
|
"purge_in_prime_tower": "0",
|
||||||
@@ -90,6 +15,9 @@
|
|||||||
"retract_before_wipe": [
|
"retract_before_wipe": [
|
||||||
"70%"
|
"70%"
|
||||||
],
|
],
|
||||||
|
"extruders_count": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
"retract_when_changing_layer": [
|
"retract_when_changing_layer": [
|
||||||
"1"
|
"1"
|
||||||
],
|
],
|
||||||
@@ -97,10 +25,10 @@
|
|||||||
"0"
|
"0"
|
||||||
],
|
],
|
||||||
"retract_length_toolchange": [
|
"retract_length_toolchange": [
|
||||||
"2"
|
"0"
|
||||||
],
|
],
|
||||||
"z_hop": [
|
"z_hop": [
|
||||||
"0.4"
|
"0"
|
||||||
],
|
],
|
||||||
"retract_restart_extra": [
|
"retract_restart_extra": [
|
||||||
"0"
|
"0"
|
||||||
@@ -116,16 +44,12 @@
|
|||||||
],
|
],
|
||||||
"z_hop_types": "Normal Lift",
|
"z_hop_types": "Normal Lift",
|
||||||
"silent_mode": "0",
|
"silent_mode": "0",
|
||||||
"single_extruder_multi_material": "1",
|
"single_extruder_multi_material": "0",
|
||||||
"change_filament_gcode": "M600",
|
"change_filament_gcode": "M600",
|
||||||
"machine_pause_gcode": "PAUSE",
|
"machine_pause_gcode": "PAUSE",
|
||||||
"wipe": [
|
"wipe": [
|
||||||
"1"
|
"1"
|
||||||
],
|
],
|
||||||
"default_filament_profile": [
|
|
||||||
"re3D Greengate rPETG"
|
|
||||||
],
|
|
||||||
"default_print_profile": "1.0mm Standard @re3D fgf 1.75",
|
|
||||||
"bed_exclude_area": [
|
"bed_exclude_area": [
|
||||||
"0x0"
|
"0x0"
|
||||||
],
|
],
|
||||||
|
|||||||
@@ -1,31 +1,36 @@
|
|||||||
{
|
{
|
||||||
"type": "machine",
|
"type": "machine",
|
||||||
"setting_id": "GM001",
|
|
||||||
"name": "re3D Gigabot 4 0.4 nozzle",
|
"name": "re3D Gigabot 4 0.4 nozzle",
|
||||||
"from": "system",
|
|
||||||
"instantiation": "true",
|
|
||||||
"inherits": "fdm_re3D_common",
|
"inherits": "fdm_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_tech": "FFF",
|
||||||
|
"model_id": "GB4",
|
||||||
"printer_model": "re3D Gigabot 4",
|
"printer_model": "re3D Gigabot 4",
|
||||||
"nozzle_diameter": [
|
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||||
"0.4",
|
"default_materials": "re3D PETG;re3D PLA;re3D PC",
|
||||||
"0.4"
|
|
||||||
],
|
|
||||||
"printer_variant": "0.4",
|
|
||||||
"printable_area": [
|
"printable_area": [
|
||||||
"0x0",
|
"0x0",
|
||||||
"590x0",
|
"590x0",
|
||||||
"590x600",
|
"590x600",
|
||||||
"0x600"
|
"0x600"
|
||||||
],
|
],
|
||||||
"printable_height": "590",
|
"printable_height": "600",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.4",
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
|
"printer_variant": "0.4",
|
||||||
"max_layer_height": [
|
"max_layer_height": [
|
||||||
"0.32"
|
"0.32"
|
||||||
],
|
],
|
||||||
"min_layer_height": [
|
"min_layer_height": [
|
||||||
"0.2"
|
"0.2"
|
||||||
],
|
],
|
||||||
"retraction_length": [
|
"default_filament_profile": [
|
||||||
"0.6"
|
"re3D PLA @0.4 nozzle",
|
||||||
|
"re3D PETG @0.4 nozzle"
|
||||||
],
|
],
|
||||||
"default_print_profile": "0.28mm Standard @re3D fdm 0.4"
|
"default_print_profile": "0.26 Standard",
|
||||||
|
"printer_settings_id": "re3d_gigbot4_04",
|
||||||
|
"setting_id": "re3d_gigbot4_04"
|
||||||
}
|
}
|
||||||
@@ -1,31 +1,36 @@
|
|||||||
{
|
{
|
||||||
"type": "machine",
|
"type": "machine",
|
||||||
"setting_id": "GM001",
|
|
||||||
"name": "re3D Gigabot 4 0.8 nozzle",
|
"name": "re3D Gigabot 4 0.8 nozzle",
|
||||||
"from": "system",
|
|
||||||
"instantiation": "true",
|
|
||||||
"inherits": "fdm_re3D_common",
|
"inherits": "fdm_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_tech": "FFF",
|
||||||
|
"model_id": "GB4",
|
||||||
"printer_model": "re3D Gigabot 4",
|
"printer_model": "re3D Gigabot 4",
|
||||||
"nozzle_diameter": [
|
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||||
"0.8",
|
"default_materials": "re3D PETG;re3D PLA;re3D PC",
|
||||||
"0.8"
|
|
||||||
],
|
|
||||||
"printable_area": [
|
"printable_area": [
|
||||||
"0x0",
|
"0x0",
|
||||||
"590x0",
|
"590x0",
|
||||||
"590x600",
|
"590x600",
|
||||||
"0x600"
|
"0x600"
|
||||||
],
|
],
|
||||||
"printable_height": "590",
|
"printable_height": "600",
|
||||||
"max_layer_height": [
|
"nozzle_diameter": [
|
||||||
"0.64"
|
"0.8",
|
||||||
],
|
"0.8"
|
||||||
"min_layer_height": [
|
|
||||||
"0.3"
|
|
||||||
],
|
|
||||||
"retraction_length": [
|
|
||||||
"1.0"
|
|
||||||
],
|
],
|
||||||
"printer_variant": "0.8",
|
"printer_variant": "0.8",
|
||||||
"default_print_profile": "0.2mm Standard @re3D fdm 0.8"
|
"max_layer_height": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.2"
|
||||||
|
],
|
||||||
|
"default_filament_profile": [
|
||||||
|
"re3D PLA @0.8 nozzle",
|
||||||
|
"re3D PETG @0.8 nozzle"
|
||||||
|
],
|
||||||
|
"default_print_profile": "0.4 Standard",
|
||||||
|
"printer_settings_id": "re3d_gigbot4_08",
|
||||||
|
"setting_id": "re3d_gigbot4_08"
|
||||||
}
|
}
|
||||||
@@ -1,15 +1,13 @@
|
|||||||
{
|
{
|
||||||
"type": "machine",
|
"type": "machine",
|
||||||
"setting_id": "GM001",
|
|
||||||
"name": "re3D Gigabot 4 XLT 0.4 nozzle",
|
"name": "re3D Gigabot 4 XLT 0.4 nozzle",
|
||||||
"from": "system",
|
|
||||||
"instantiation": "true",
|
|
||||||
"inherits": "fdm_re3D_common",
|
"inherits": "fdm_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_tech": "FFF",
|
||||||
|
"model_id": "GB4",
|
||||||
"printer_model": "re3D Gigabot 4 XLT",
|
"printer_model": "re3D Gigabot 4 XLT",
|
||||||
"nozzle_diameter": [
|
"bed_texture": "Gigabot 4 XLT_buildplate_texture.png",
|
||||||
"0.4",
|
"default_materials": "re3D PETG;re3D PLA;re3D PC",
|
||||||
"0.4"
|
|
||||||
],
|
|
||||||
"printable_area": [
|
"printable_area": [
|
||||||
"0x0",
|
"0x0",
|
||||||
"590x0",
|
"590x0",
|
||||||
@@ -17,15 +15,22 @@
|
|||||||
"0x760"
|
"0x760"
|
||||||
],
|
],
|
||||||
"printable_height": "900",
|
"printable_height": "900",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.4",
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
|
"printer_variant": "0.4",
|
||||||
"max_layer_height": [
|
"max_layer_height": [
|
||||||
"0.32"
|
"0.32"
|
||||||
],
|
],
|
||||||
"min_layer_height": [
|
"min_layer_height": [
|
||||||
"0.2"
|
"0.2"
|
||||||
],
|
],
|
||||||
"retraction_length": [
|
"default_filament_profile": [
|
||||||
"0.6"
|
"re3D PLA @0.4 nozzle",
|
||||||
|
"re3D PETG @0.4 nozzle"
|
||||||
],
|
],
|
||||||
"printer_variant": "0.4",
|
"default_print_profile": "0.26 Standard",
|
||||||
"default_print_profile": "0.28mm Standard @re3D fdm 0.4"
|
"printer_settings_id": "re3d_gigabot4_xlt_04",
|
||||||
|
"setting_id": "re3d_gigabot4_xlt_04"
|
||||||
}
|
}
|
||||||
@@ -1,31 +1,36 @@
|
|||||||
{
|
{
|
||||||
"type": "machine",
|
"type": "machine",
|
||||||
"setting_id": "GM001",
|
|
||||||
"name": "re3D Gigabot 4 XLT 0.8 nozzle",
|
"name": "re3D Gigabot 4 XLT 0.8 nozzle",
|
||||||
"from": "system",
|
|
||||||
"instantiation": "true",
|
|
||||||
"inherits": "fdm_re3D_common",
|
"inherits": "fdm_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_tech": "FFF",
|
||||||
|
"model_id": "GB4",
|
||||||
"printer_model": "re3D Gigabot 4 XLT",
|
"printer_model": "re3D Gigabot 4 XLT",
|
||||||
|
"bed_texture": "Gigabot 4 XLT_buildplate_texture.png",
|
||||||
|
"default_materials": "re3D PETG;re3D PLA;re3D PC",
|
||||||
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"590x0",
|
||||||
|
"590x760",
|
||||||
|
"0x760"
|
||||||
|
],
|
||||||
|
"printable_height": "900",
|
||||||
"nozzle_diameter": [
|
"nozzle_diameter": [
|
||||||
"0.8",
|
"0.8",
|
||||||
"0.8"
|
"0.8"
|
||||||
],
|
],
|
||||||
"printable_area": [
|
"printer_variant": "0.8",
|
||||||
"0x0",
|
|
||||||
"600x0",
|
|
||||||
"600x760",
|
|
||||||
"0x760"
|
|
||||||
],
|
|
||||||
"printable_height": "900",
|
|
||||||
"max_layer_height": [
|
"max_layer_height": [
|
||||||
"0.64"
|
"0.6"
|
||||||
],
|
],
|
||||||
"min_layer_height": [
|
"min_layer_height": [
|
||||||
"0.2"
|
"0.2"
|
||||||
],
|
],
|
||||||
"retraction_length": [
|
"default_filament_profile": [
|
||||||
"1.0"
|
"re3D PLA @0.8 nozzle",
|
||||||
|
"re3D PETG @0.8 nozzle"
|
||||||
],
|
],
|
||||||
"printer_variant": "0.8",
|
"default_print_profile": "0.4 Standard",
|
||||||
"default_print_profile": "0.2mm Standard @re3D fdm 0.8"
|
"printer_settings_id": "re3d_gigabot4_xlt_08",
|
||||||
|
"setting_id": "re3d_gigabot4_xlt_08"
|
||||||
}
|
}
|
||||||
@@ -1,8 +1,9 @@
|
|||||||
{
|
{
|
||||||
"type": "machine_model",
|
"type": "machine_model",
|
||||||
"name": "re3D Gigabot 4 XLT",
|
"name": "re3D Gigabot 4 XLT",
|
||||||
"model_id": "GB4XLT",
|
"model_id": "re3D Gigabot 4 XLT",
|
||||||
"nozzle_diameter": "0.4;0.8",
|
"nozzle_diameter": "0.4;0.8",
|
||||||
|
"instantiation": "false",
|
||||||
"machine_tech": "FFF",
|
"machine_tech": "FFF",
|
||||||
"family": "re3D",
|
"family": "re3D",
|
||||||
"bed_model": "",
|
"bed_model": "",
|
||||||
|
|||||||
@@ -1,8 +1,9 @@
|
|||||||
{
|
{
|
||||||
"type": "machine_model",
|
"type": "machine_model",
|
||||||
"name": "re3D Gigabot 4",
|
"name": "re3D Gigabot 4",
|
||||||
"model_id": "GB4",
|
"model_id": "re3D Gigabot 4",
|
||||||
"nozzle_diameter": "0.4;0.8",
|
"nozzle_diameter": "0.4;0.8",
|
||||||
|
"instantiation": "false",
|
||||||
"machine_tech": "FFF",
|
"machine_tech": "FFF",
|
||||||
"family": "re3D",
|
"family": "re3D",
|
||||||
"bed_model": "",
|
"bed_model": "",
|
||||||
|
|||||||
@@ -1,28 +0,0 @@
|
|||||||
{
|
|
||||||
"type": "machine",
|
|
||||||
"setting_id": "GM001",
|
|
||||||
"name": "re3D Gigabot X2 1.75 nozzle",
|
|
||||||
"from": "system",
|
|
||||||
"instantiation": "true",
|
|
||||||
"inherits": "fgf_re3D_common",
|
|
||||||
"printer_model": "re3D Gigabot X2",
|
|
||||||
"nozzle_diameter": [
|
|
||||||
"1.75"
|
|
||||||
],
|
|
||||||
"printable_area": [
|
|
||||||
"0x0",
|
|
||||||
"552x0",
|
|
||||||
"552x593",
|
|
||||||
"0x593"
|
|
||||||
],
|
|
||||||
"printable_height": "470",
|
|
||||||
"extruder_clearance_height_to_rod": "220",
|
|
||||||
"extruder_clearance_height_to_lid": "630",
|
|
||||||
"max_layer_height": [
|
|
||||||
"1.4"
|
|
||||||
],
|
|
||||||
"min_layer_height": [
|
|
||||||
"0.4"
|
|
||||||
],
|
|
||||||
"printer_variant": "1.75"
|
|
||||||
}
|
|
||||||
@@ -1,28 +0,0 @@
|
|||||||
{
|
|
||||||
"type": "machine",
|
|
||||||
"setting_id": "GM001",
|
|
||||||
"name": "re3D Gigabot X2 XLT 1.75 nozzle",
|
|
||||||
"from": "system",
|
|
||||||
"instantiation": "true",
|
|
||||||
"inherits": "fgf_re3D_common",
|
|
||||||
"printer_model": "re3D Gigabot X2 XLT",
|
|
||||||
"nozzle_diameter": [
|
|
||||||
"1.75"
|
|
||||||
],
|
|
||||||
"printable_area": [
|
|
||||||
"0x0",
|
|
||||||
"552x0",
|
|
||||||
"552x740",
|
|
||||||
"0x740"
|
|
||||||
],
|
|
||||||
"printable_height": "765",
|
|
||||||
"extruder_clearance_height_to_rod": "220",
|
|
||||||
"extruder_clearance_height_to_lid": "630",
|
|
||||||
"max_layer_height": [
|
|
||||||
"1.4"
|
|
||||||
],
|
|
||||||
"min_layer_height": [
|
|
||||||
"0.6"
|
|
||||||
],
|
|
||||||
"printer_variant": "1.75"
|
|
||||||
}
|
|
||||||
@@ -1,12 +0,0 @@
|
|||||||
{
|
|
||||||
"type": "machine_model",
|
|
||||||
"name": "re3D Gigabot X2 XLT",
|
|
||||||
"model_id": "GBX2XLT",
|
|
||||||
"nozzle_diameter": "1.75",
|
|
||||||
"machine_tech": "FFF",
|
|
||||||
"family": "re3D",
|
|
||||||
"bed_model": "",
|
|
||||||
"bed_texture": "re3D Gigabot X2 XLT_buildplate_texture.svg",
|
|
||||||
"hotend_model": "GBX-HOTEND.stl",
|
|
||||||
"default_materials": "re3D rPP;re3D Greengate rPETG;"
|
|
||||||
}
|
|
||||||
@@ -1,12 +0,0 @@
|
|||||||
{
|
|
||||||
"type": "machine_model",
|
|
||||||
"name": "re3D Gigabot X2",
|
|
||||||
"model_id": "GBX2",
|
|
||||||
"nozzle_diameter": "1.75",
|
|
||||||
"machine_tech": "FFF",
|
|
||||||
"family": "re3D",
|
|
||||||
"bed_model": "",
|
|
||||||
"bed_texture": "re3D Gigabot X2_buildplate_texture.svg",
|
|
||||||
"hotend_model": "GBX-HOTEND.stl",
|
|
||||||
"default_materials": "re3D rPP;re3D Greengate rPETG;"
|
|
||||||
}
|
|
||||||
@@ -0,0 +1,33 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"name": "re3D GigabotX 2 0.8 nozzle",
|
||||||
|
"inherits": "fgf_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_tech": "FGF",
|
||||||
|
"model_id": "re3D GBX2",
|
||||||
|
"printer_model": "re3D GigabotX 2",
|
||||||
|
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||||
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"552x0",
|
||||||
|
"552x593",
|
||||||
|
"0x593"
|
||||||
|
],
|
||||||
|
"printable_height": "470",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"printer_variant": "0.8",
|
||||||
|
"max_layer_height": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.3"
|
||||||
|
],
|
||||||
|
"default_filament_profile": [
|
||||||
|
"re3D Greengate rPETG @0.8 nozzle"
|
||||||
|
],
|
||||||
|
"default_print_profile": "0.6 Standard",
|
||||||
|
"printer_settings_id": "re3d_gbx_08",
|
||||||
|
"setting_id": "re3d_gbx_08"
|
||||||
|
}
|
||||||
@@ -0,0 +1,34 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"name": "re3D GigabotX 2 1.75 nozzle",
|
||||||
|
"renamed_from": "re3D Gigabot X2 1.75 nozzle",
|
||||||
|
"inherits": "fgf_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_tech": "FGF",
|
||||||
|
"model_id": "re3D GBX2",
|
||||||
|
"printer_model": "re3D GigabotX 2",
|
||||||
|
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||||
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"552x0",
|
||||||
|
"552x593",
|
||||||
|
"0x593"
|
||||||
|
],
|
||||||
|
"printable_height": "470",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"printer_variant": "1.75",
|
||||||
|
"max_layer_height": [
|
||||||
|
"1.3"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"default_filament_profile": [
|
||||||
|
"re3D Greengate rPETG @1.75 nozzle"
|
||||||
|
],
|
||||||
|
"default_print_profile": "1.0 Standard",
|
||||||
|
"printer_settings_id": "re3d_gbx_175",
|
||||||
|
"setting_id": "re3d_gbx_175"
|
||||||
|
}
|
||||||
@@ -0,0 +1,33 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"name": "re3D GigabotX 2 XLT 0.8 nozzle",
|
||||||
|
"inherits": "fgf_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_tech": "FGF",
|
||||||
|
"model_id": "re3D GBX2 XLT",
|
||||||
|
"printer_model": "re3D GigabotX 2 XLT",
|
||||||
|
"bed_texture": "GigabotX 2 XLT_buildplate_texture.png",
|
||||||
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"552x0",
|
||||||
|
"552x740",
|
||||||
|
"0x740"
|
||||||
|
],
|
||||||
|
"printable_height": "470",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"printer_variant": "0.8",
|
||||||
|
"max_layer_height": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.3"
|
||||||
|
],
|
||||||
|
"default_filament_profile": [
|
||||||
|
"re3D Greengate rPETG @0.8 nozzle"
|
||||||
|
],
|
||||||
|
"default_print_profile": "0.6 Standard",
|
||||||
|
"printer_settings_id": "re3d_gbx_xlt_08",
|
||||||
|
"setting_id": "re3d_gbx_xlt_08"
|
||||||
|
}
|
||||||
@@ -0,0 +1,34 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"name": "re3D GigabotX 2 XLT 1.75 nozzle",
|
||||||
|
"renamed_from": "re3D Gigabot X2 XLT 1.75 nozzle",
|
||||||
|
"inherits": "fgf_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_tech": "FGF",
|
||||||
|
"model_id": "re3D GBX2 XLT",
|
||||||
|
"printer_model": "re3D GigabotX 2 XLT",
|
||||||
|
"bed_texture": "GigabotX 2 XLT_buildplate_texture.png",
|
||||||
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"552x0",
|
||||||
|
"552x740",
|
||||||
|
"0x740"
|
||||||
|
],
|
||||||
|
"printable_height": "470",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"printer_variant": "1.75",
|
||||||
|
"max_layer_height": [
|
||||||
|
"1.3"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"default_filament_profile": [
|
||||||
|
"re3D Greengate rPETG @1.75 nozzle"
|
||||||
|
],
|
||||||
|
"default_print_profile": "1.0 Standard",
|
||||||
|
"printer_settings_id": "re3d_gbx_xlt_175",
|
||||||
|
"setting_id": "re3d_gbx_xlt_175"
|
||||||
|
}
|
||||||
@@ -0,0 +1,13 @@
|
|||||||
|
{
|
||||||
|
"type": "machine_model",
|
||||||
|
"name": "re3D GigabotX 2 XLT",
|
||||||
|
"model_id": "re3D GigabotX 2 XLT",
|
||||||
|
"nozzle_diameter": "0.8;1.75",
|
||||||
|
"instantiation": "false",
|
||||||
|
"machine_tech": "FGF",
|
||||||
|
"family": "re3D",
|
||||||
|
"bed_model": "",
|
||||||
|
"bed_texture": "re3D Gigabot X2 XLT_buildplate_texture.svg",
|
||||||
|
"hotend_model": "GBX-HOTEND.stl",
|
||||||
|
"default_materials": "re3D Greengate rPETG;re3D rPP;"
|
||||||
|
}
|
||||||
@@ -0,0 +1,13 @@
|
|||||||
|
{
|
||||||
|
"type": "machine_model",
|
||||||
|
"name": "re3D GigabotX 2",
|
||||||
|
"model_id": "re3D GigabotX 2",
|
||||||
|
"nozzle_diameter": "0.8;1.75",
|
||||||
|
"instantiation": "false",
|
||||||
|
"machine_tech": "FGF",
|
||||||
|
"family": "re3D",
|
||||||
|
"bed_model": "",
|
||||||
|
"bed_texture": "re3D Gigabot X2_buildplate_texture.svg",
|
||||||
|
"hotend_model": "GBX-HOTEND.stl",
|
||||||
|
"default_materials": "re3D Greengate rPETG;re3D rPP;"
|
||||||
|
}
|
||||||
@@ -1,15 +1,13 @@
|
|||||||
{
|
{
|
||||||
"type": "machine",
|
"type": "machine",
|
||||||
"setting_id": "GM001",
|
|
||||||
"name": "re3D Terabot 4 0.4 nozzle",
|
"name": "re3D Terabot 4 0.4 nozzle",
|
||||||
"from": "system",
|
"inherits": "fdm_re3D_common",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fgf_re3D_common",
|
"machine_tech": "FFF",
|
||||||
|
"model_id": "TB4",
|
||||||
"printer_model": "re3D Terabot 4",
|
"printer_model": "re3D Terabot 4",
|
||||||
"nozzle_diameter": [
|
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||||
"0.4",
|
"default_materials": "re3D PETG;re3D PLA;re3D PC",
|
||||||
"0.4"
|
|
||||||
],
|
|
||||||
"printable_area": [
|
"printable_area": [
|
||||||
"0x0",
|
"0x0",
|
||||||
"915x0",
|
"915x0",
|
||||||
@@ -17,15 +15,22 @@
|
|||||||
"0x915"
|
"0x915"
|
||||||
],
|
],
|
||||||
"printable_height": "1000",
|
"printable_height": "1000",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.4",
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
|
"printer_variant": "0.4",
|
||||||
"max_layer_height": [
|
"max_layer_height": [
|
||||||
"0.32"
|
"0.32"
|
||||||
],
|
],
|
||||||
"min_layer_height": [
|
"min_layer_height": [
|
||||||
"0.2"
|
"0.2"
|
||||||
],
|
],
|
||||||
"retraction_length": [
|
"default_filament_profile": [
|
||||||
"0.6"
|
"re3D PLA @0.4 nozzle",
|
||||||
|
"re3D PETG @0.4 nozzle"
|
||||||
],
|
],
|
||||||
"printer_variant": "0.4",
|
"default_print_profile": "0.26 Standard",
|
||||||
"default_print_profile": "0.28mm Standard @re3D fdm 0.4"
|
"printer_settings_id": "re3d_terabot4_04",
|
||||||
|
"setting_id": "re3d_terabot4_04"
|
||||||
}
|
}
|
||||||
@@ -1,15 +1,13 @@
|
|||||||
{
|
{
|
||||||
"type": "machine",
|
"type": "machine",
|
||||||
"setting_id": "GM001",
|
|
||||||
"name": "re3D Terabot 4 0.8 nozzle",
|
"name": "re3D Terabot 4 0.8 nozzle",
|
||||||
"from": "system",
|
"inherits": "fdm_re3D_common",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fgf_re3D_common",
|
"machine_tech": "FFF",
|
||||||
|
"model_id": "TB4",
|
||||||
"printer_model": "re3D Terabot 4",
|
"printer_model": "re3D Terabot 4",
|
||||||
"nozzle_diameter": [
|
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||||
"0.8",
|
"default_materials": "re3D PETG;re3D PLA;re3D PC",
|
||||||
"0.8"
|
|
||||||
],
|
|
||||||
"printable_area": [
|
"printable_area": [
|
||||||
"0x0",
|
"0x0",
|
||||||
"915x0",
|
"915x0",
|
||||||
@@ -17,15 +15,22 @@
|
|||||||
"0x915"
|
"0x915"
|
||||||
],
|
],
|
||||||
"printable_height": "1000",
|
"printable_height": "1000",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.8",
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"printer_variant": "0.8",
|
||||||
"max_layer_height": [
|
"max_layer_height": [
|
||||||
"0.64"
|
"0.6"
|
||||||
],
|
],
|
||||||
"min_layer_height": [
|
"min_layer_height": [
|
||||||
"0.2"
|
"0.2"
|
||||||
],
|
],
|
||||||
"retraction_length": [
|
"default_filament_profile": [
|
||||||
"1.0"
|
"re3D PLA @0.8 nozzle",
|
||||||
|
"re3D PETG @0.8 nozzle"
|
||||||
],
|
],
|
||||||
"printer_variant": "0.8",
|
"default_print_profile": "0.4 Standard",
|
||||||
"default_print_profile": "0.2mm Standard @re3D fdm 0.8"
|
"printer_settings_id": "re3d_terabot4_08",
|
||||||
|
"setting_id": "re3d_terabot4_08"
|
||||||
}
|
}
|
||||||
@@ -1,8 +1,9 @@
|
|||||||
{
|
{
|
||||||
"type": "machine_model",
|
"type": "machine_model",
|
||||||
"name": "re3D Terabot 4",
|
"name": "re3D Terabot 4",
|
||||||
"model_id": "TB4",
|
"model_id": "re3D Terabot 4",
|
||||||
"nozzle_diameter": "0.4;0.8",
|
"nozzle_diameter": "0.4;0.8",
|
||||||
|
"instantiation": "false",
|
||||||
"machine_tech": "FFF",
|
"machine_tech": "FFF",
|
||||||
"family": "re3D",
|
"family": "re3D",
|
||||||
"bed_model": "",
|
"bed_model": "",
|
||||||
|
|||||||
@@ -1,28 +0,0 @@
|
|||||||
{
|
|
||||||
"type": "machine",
|
|
||||||
"setting_id": "GM001",
|
|
||||||
"name": "re3D Terabot X2 1.75 nozzle",
|
|
||||||
"from": "system",
|
|
||||||
"instantiation": "true",
|
|
||||||
"inherits": "fgf_re3D_common",
|
|
||||||
"printer_model": "re3D Terabot X2",
|
|
||||||
"nozzle_diameter": [
|
|
||||||
"1.75"
|
|
||||||
],
|
|
||||||
"printable_area": [
|
|
||||||
"0x0",
|
|
||||||
"879x0",
|
|
||||||
"879x908",
|
|
||||||
"0x908"
|
|
||||||
],
|
|
||||||
"printable_height": "830",
|
|
||||||
"extruder_clearance_height_to_rod": "220",
|
|
||||||
"extruder_clearance_height_to_lid": "630",
|
|
||||||
"max_layer_height": [
|
|
||||||
"1.4"
|
|
||||||
],
|
|
||||||
"min_layer_height": [
|
|
||||||
"0.4"
|
|
||||||
],
|
|
||||||
"printer_variant": "1.75"
|
|
||||||
}
|
|
||||||
@@ -1,12 +0,0 @@
|
|||||||
{
|
|
||||||
"type": "machine_model",
|
|
||||||
"name": "re3D Terabot X2",
|
|
||||||
"model_id": "TBX2",
|
|
||||||
"nozzle_diameter": "1.75",
|
|
||||||
"machine_tech": "FFF",
|
|
||||||
"family": "re3D",
|
|
||||||
"bed_model": "",
|
|
||||||
"bed_texture": "re3D Terabot X2_buildplate_texture.svg",
|
|
||||||
"hotend_model": "GBX-HOTEND.stl",
|
|
||||||
"default_materials": "re3D rPP;re3D Greengate rPETG;"
|
|
||||||
}
|
|
||||||
@@ -0,0 +1,33 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"name": "re3D TerabotX 2 0.8 nozzle",
|
||||||
|
"inherits": "fgf_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_tech": "FGF",
|
||||||
|
"model_id": "re3D TBX2",
|
||||||
|
"printer_model": "re3D TerabotX 2",
|
||||||
|
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||||
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"892x0",
|
||||||
|
"892x908",
|
||||||
|
"0x908"
|
||||||
|
],
|
||||||
|
"printable_height": "870",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"printer_variant": "0.8",
|
||||||
|
"max_layer_height": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.3"
|
||||||
|
],
|
||||||
|
"default_filament_profile": [
|
||||||
|
"re3D Greengate rPETG @0.8 nozzle"
|
||||||
|
],
|
||||||
|
"default_print_profile": "0.6 Standard",
|
||||||
|
"printer_settings_id": "re3d_tbx2_08",
|
||||||
|
"setting_id": "re3d_tbx2_08"
|
||||||
|
}
|
||||||
@@ -0,0 +1,34 @@
|
|||||||
|
{
|
||||||
|
"type": "machine",
|
||||||
|
"name": "re3D TerabotX 2 1.75 nozzle",
|
||||||
|
"renamed_from": "re3D Terabot X2 1.75 nozzle",
|
||||||
|
"inherits": "fgf_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"machine_tech": "FGF",
|
||||||
|
"model_id": "re3D TBX2",
|
||||||
|
"printer_model": "re3D TerabotX 2",
|
||||||
|
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||||
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"892x0",
|
||||||
|
"892x908",
|
||||||
|
"0x908"
|
||||||
|
],
|
||||||
|
"printable_height": "870",
|
||||||
|
"nozzle_diameter": [
|
||||||
|
"1.75"
|
||||||
|
],
|
||||||
|
"printer_variant": "1.75",
|
||||||
|
"max_layer_height": [
|
||||||
|
"1.3"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
|
"default_filament_profile": [
|
||||||
|
"re3D Greengate rPETG @1.75 nozzle"
|
||||||
|
],
|
||||||
|
"default_print_profile": "1.0 Standard",
|
||||||
|
"printer_settings_id": "re3d_tbx2_175",
|
||||||
|
"setting_id": "re3d_tbx2_175"
|
||||||
|
}
|
||||||
@@ -0,0 +1,13 @@
|
|||||||
|
{
|
||||||
|
"type": "machine_model",
|
||||||
|
"name": "re3D TerabotX 2",
|
||||||
|
"model_id": "re3D TerabotX 2",
|
||||||
|
"nozzle_diameter": "0.8;1.75",
|
||||||
|
"instantiation": "false",
|
||||||
|
"machine_tech": "FGF",
|
||||||
|
"family": "re3D",
|
||||||
|
"bed_model": "",
|
||||||
|
"bed_texture": "re3D Terabot X2_buildplate_texture.svg",
|
||||||
|
"hotend_model": "GBX-HOTEND.stl",
|
||||||
|
"default_materials": "re3D Greengate rPETG;re3D rPP;"
|
||||||
|
}
|
||||||
@@ -1,7 +1,8 @@
|
|||||||
{
|
{
|
||||||
"type": "process",
|
"type": "process",
|
||||||
"setting_id": "GP004",
|
"setting_id": "fdm__04_026",
|
||||||
"name": "0.26mm Standard @re3D fdm 0.4",
|
"name": "0.26 Standard",
|
||||||
|
"renamed_from": "0.26mm Standard @re3D fdm 0.4",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_process_re3D_common",
|
"inherits": "fdm_process_re3D_common",
|
||||||
@@ -12,36 +13,14 @@
|
|||||||
],
|
],
|
||||||
"layer_height": "0.26",
|
"layer_height": "0.26",
|
||||||
"initial_layer_print_height": "0.4",
|
"initial_layer_print_height": "0.4",
|
||||||
"top_shell_layers": "4",
|
"line_width": "0.48",
|
||||||
"top_shell_thickness": "0.6",
|
"outer_wall_line_width": "0.48",
|
||||||
"bottom_shell_layers": "3",
|
"inner_wall_line_width": "0.48",
|
||||||
"line_width": "0.45",
|
|
||||||
"outer_wall_line_width": "0.45",
|
|
||||||
"inner_wall_line_width": "0.45",
|
|
||||||
"initial_layer_line_width": "0.6",
|
"initial_layer_line_width": "0.6",
|
||||||
"sparse_infill_line_width": "0.45",
|
"sparse_infill_line_width": "0.48",
|
||||||
"internal_solid_infill_line_width": "0.45",
|
"internal_solid_infill_line_width": "0.48",
|
||||||
"top_surface_line_width": "0.45",
|
"top_surface_line_width": "0.48",
|
||||||
"support_line_width": "0.45",
|
"support_line_width": "0.48",
|
||||||
"overhang_1_4_speed": "45",
|
"support_top_z_distance": "0.2",
|
||||||
"overhang_2_4_speed": "35",
|
"support_bottom_z_distance": "0.2"
|
||||||
"overhang_3_4_speed": "25",
|
|
||||||
"overhang_4_4_speed": "15",
|
|
||||||
"initial_layer_speed": "30",
|
|
||||||
"initial_layer_infill_speed": "30",
|
|
||||||
"initial_layer_travel_speed": "50",
|
|
||||||
"outer_wall_speed": "80",
|
|
||||||
"inner_wall_speed": "80",
|
|
||||||
"small_perimeter_speed": "80",
|
|
||||||
"small_perimeter_threshold": "80",
|
|
||||||
"sparse_infill_speed": "80",
|
|
||||||
"internal_solid_infill_speed": "80",
|
|
||||||
"top_surface_speed": "80",
|
|
||||||
"gap_infill_speed": "80",
|
|
||||||
"support_speed": "80",
|
|
||||||
"support_interface_speed": "80",
|
|
||||||
"travel_speed": "300",
|
|
||||||
"standby_temperature_delta": "-55",
|
|
||||||
"support_top_z_distance": "0.28",
|
|
||||||
"support_bottom_z_distance": "0.28"
|
|
||||||
}
|
}
|
||||||
@@ -1,22 +1,26 @@
|
|||||||
{
|
{
|
||||||
"type": "process",
|
"type": "process",
|
||||||
"setting_id": "GP004",
|
"setting_id": "fdm_04_02",
|
||||||
"name": "0.2mm Fine @re3D fdm 0.4",
|
"name": "0.2 Fine",
|
||||||
|
"renamed_from": "0.2mm Fine @re3D fdm 0.4",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"inherits": "fdm_process_re3D_common",
|
"inherits": "fdm_process_re3D_common",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"layer_height": "0.2",
|
|
||||||
"compatible_printers": [
|
"compatible_printers": [
|
||||||
"re3D Gigabot 4 0.4 nozzle",
|
"re3D Gigabot 4 0.4 nozzle",
|
||||||
"re3D Gigabot 4 XLT 0.4 nozzle",
|
"re3D Gigabot 4 XLT 0.4 nozzle",
|
||||||
"re3D Terabot 4 0.4 nozzle"
|
"re3D Terabot 4 0.4 nozzle"
|
||||||
],
|
],
|
||||||
"line_width": "0.42",
|
"layer_height": "0.2",
|
||||||
"outer_wall_line_width": "0.42",
|
"initial_layer_print_height": "0.4",
|
||||||
"inner_wall_line_width": "0.42",
|
"line_width": "0.44",
|
||||||
"initial_layer_line_width": "0.5",
|
"outer_wall_line_width": "0.44",
|
||||||
"sparse_infill_line_width": "0.42",
|
"inner_wall_line_width": "0.44",
|
||||||
"internal_solid_infill_line_width": "0.42",
|
"initial_layer_line_width": "0.6",
|
||||||
"top_surface_line_width": "0.42",
|
"sparse_infill_line_width": "0.48",
|
||||||
"support_line_width": "0.42"
|
"internal_solid_infill_line_width": "0.48",
|
||||||
|
"top_surface_line_width": "0.44",
|
||||||
|
"support_line_width": "0.48",
|
||||||
|
"support_top_z_distance": "0.2",
|
||||||
|
"support_bottom_z_distance": "0.2"
|
||||||
}
|
}
|
||||||
@@ -1,47 +0,0 @@
|
|||||||
{
|
|
||||||
"type": "process",
|
|
||||||
"setting_id": "GP004",
|
|
||||||
"name": "0.2mm Standard @re3D fdm 0.8",
|
|
||||||
"from": "system",
|
|
||||||
"inherits": "fdm_process_re3D_common",
|
|
||||||
"instantiation": "true",
|
|
||||||
"compatible_printers": [
|
|
||||||
"re3D Gigabot 4 0.8 nozzle",
|
|
||||||
"re3D Gigabot 4 XLT 0.8 nozzle",
|
|
||||||
"re3D Terabot 4 0.8 nozzle"
|
|
||||||
],
|
|
||||||
"layer_height": "0.2",
|
|
||||||
"initial_layer_print_height": "0.4",
|
|
||||||
"top_shell_layers": "4",
|
|
||||||
"top_shell_thickness": "0.6",
|
|
||||||
"bottom_shell_layers": "3",
|
|
||||||
"line_width": "0.8",
|
|
||||||
"outer_wall_line_width": "0.8",
|
|
||||||
"inner_wall_line_width": "0.8",
|
|
||||||
"initial_layer_line_width": "0.8",
|
|
||||||
"sparse_infill_line_width": "0.8",
|
|
||||||
"internal_solid_infill_line_width": "0.8",
|
|
||||||
"top_surface_line_width": "0.8",
|
|
||||||
"support_line_width": "0.8",
|
|
||||||
"overhang_1_4_speed": "45",
|
|
||||||
"overhang_2_4_speed": "35",
|
|
||||||
"overhang_3_4_speed": "25",
|
|
||||||
"overhang_4_4_speed": "15",
|
|
||||||
"initial_layer_speed": "30",
|
|
||||||
"initial_layer_infill_speed": "30",
|
|
||||||
"initial_layer_travel_speed": "50",
|
|
||||||
"outer_wall_speed": "45",
|
|
||||||
"inner_wall_speed": "45",
|
|
||||||
"small_perimeter_speed": "45",
|
|
||||||
"small_perimeter_threshold": "45",
|
|
||||||
"sparse_infill_speed": "45",
|
|
||||||
"internal_solid_infill_speed": "45",
|
|
||||||
"top_surface_speed": "45",
|
|
||||||
"gap_infill_speed": "45",
|
|
||||||
"support_speed": "45",
|
|
||||||
"support_interface_speed": "45",
|
|
||||||
"travel_speed": "300",
|
|
||||||
"standby_temperature_delta": "-55",
|
|
||||||
"support_top_z_distance": "0.24",
|
|
||||||
"support_bottom_z_distance": "0.24"
|
|
||||||
}
|
|
||||||
@@ -1,7 +1,8 @@
|
|||||||
{
|
{
|
||||||
"type": "process",
|
"type": "process",
|
||||||
"setting_id": "GP004",
|
"setting_id": "fdm_04_032",
|
||||||
"name": "0.32mm Draft @re3D fdm 0.4",
|
"name": "0.32 Draft",
|
||||||
|
"renamed_from": "0.32mm Draft @re3D fdm 0.4",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_process_re3D_common",
|
"inherits": "fdm_process_re3D_common",
|
||||||
@@ -12,9 +13,6 @@
|
|||||||
],
|
],
|
||||||
"layer_height": "0.32",
|
"layer_height": "0.32",
|
||||||
"initial_layer_print_height": "0.4",
|
"initial_layer_print_height": "0.4",
|
||||||
"top_shell_layers": "4",
|
|
||||||
"top_shell_thickness": "0.6",
|
|
||||||
"bottom_shell_layers": "3",
|
|
||||||
"line_width": "0.48",
|
"line_width": "0.48",
|
||||||
"outer_wall_line_width": "0.48",
|
"outer_wall_line_width": "0.48",
|
||||||
"inner_wall_line_width": "0.48",
|
"inner_wall_line_width": "0.48",
|
||||||
@@ -23,25 +21,6 @@
|
|||||||
"internal_solid_infill_line_width": "0.48",
|
"internal_solid_infill_line_width": "0.48",
|
||||||
"top_surface_line_width": "0.48",
|
"top_surface_line_width": "0.48",
|
||||||
"support_line_width": "0.48",
|
"support_line_width": "0.48",
|
||||||
"overhang_1_4_speed": "45",
|
|
||||||
"overhang_2_4_speed": "35",
|
|
||||||
"overhang_3_4_speed": "25",
|
|
||||||
"overhang_4_4_speed": "15",
|
|
||||||
"initial_layer_speed": "30",
|
|
||||||
"initial_layer_infill_speed": "30",
|
|
||||||
"initial_layer_travel_speed": "50",
|
|
||||||
"outer_wall_speed": "80",
|
|
||||||
"inner_wall_speed": "80",
|
|
||||||
"small_perimeter_speed": "80",
|
|
||||||
"small_perimeter_threshold": "80",
|
|
||||||
"sparse_infill_speed": "80",
|
|
||||||
"internal_solid_infill_speed": "80",
|
|
||||||
"top_surface_speed": "80",
|
|
||||||
"gap_infill_speed": "80",
|
|
||||||
"support_speed": "80",
|
|
||||||
"support_interface_speed": "80",
|
|
||||||
"travel_speed": "300",
|
|
||||||
"standby_temperature_delta": "-55",
|
|
||||||
"support_top_z_distance": "0.35",
|
"support_top_z_distance": "0.35",
|
||||||
"support_bottom_z_distance": "0.35"
|
"support_bottom_z_distance": "0.35"
|
||||||
}
|
}
|
||||||
@@ -0,0 +1,26 @@
|
|||||||
|
{
|
||||||
|
"type": "process",
|
||||||
|
"setting_id": "fdm_08_03",
|
||||||
|
"name": "0.3 Fine",
|
||||||
|
"renamed_from": "0.2mm Standard @re3D fdm 0.8",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "fdm_process_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D Gigabot 4 0.8 nozzle",
|
||||||
|
"re3D Gigabot 4 XLT 0.8 nozzle",
|
||||||
|
"re3D Terabot 4 0.8 nozzle"
|
||||||
|
],
|
||||||
|
"layer_height": "0.3",
|
||||||
|
"initial_layer_print_height": "0.4",
|
||||||
|
"line_width": "1",
|
||||||
|
"outer_wall_line_width": "1",
|
||||||
|
"inner_wall_line_width": "1",
|
||||||
|
"initial_layer_line_width": "1",
|
||||||
|
"sparse_infill_line_width": "1",
|
||||||
|
"internal_solid_infill_line_width": "1",
|
||||||
|
"top_surface_line_width": "1",
|
||||||
|
"support_line_width": "1",
|
||||||
|
"support_top_z_distance": "0.24",
|
||||||
|
"support_bottom_z_distance": "0.24"
|
||||||
|
}
|
||||||
@@ -1,7 +1,8 @@
|
|||||||
{
|
{
|
||||||
"type": "process",
|
"type": "process",
|
||||||
"setting_id": "GP004",
|
"setting_id": "fdm_08_04",
|
||||||
"name": "0.4mm Draft @re3D fdm 0.8",
|
"name": "0.4 Standard",
|
||||||
|
"renamed_from": "0.4mm Draft @re3D fdm 0.8",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_process_re3D_common",
|
"inherits": "fdm_process_re3D_common",
|
||||||
@@ -12,9 +13,6 @@
|
|||||||
],
|
],
|
||||||
"layer_height": "0.4",
|
"layer_height": "0.4",
|
||||||
"initial_layer_print_height": "0.6",
|
"initial_layer_print_height": "0.6",
|
||||||
"top_shell_layers": "4",
|
|
||||||
"top_shell_thickness": "0.6",
|
|
||||||
"bottom_shell_layers": "3",
|
|
||||||
"line_width": "1",
|
"line_width": "1",
|
||||||
"outer_wall_line_width": "1",
|
"outer_wall_line_width": "1",
|
||||||
"inner_wall_line_width": "1",
|
"inner_wall_line_width": "1",
|
||||||
@@ -23,25 +21,6 @@
|
|||||||
"internal_solid_infill_line_width": "1",
|
"internal_solid_infill_line_width": "1",
|
||||||
"top_surface_line_width": "1",
|
"top_surface_line_width": "1",
|
||||||
"support_line_width": "1",
|
"support_line_width": "1",
|
||||||
"overhang_1_4_speed": "45",
|
|
||||||
"overhang_2_4_speed": "35",
|
|
||||||
"overhang_3_4_speed": "25",
|
|
||||||
"overhang_4_4_speed": "15",
|
|
||||||
"initial_layer_speed": "30",
|
|
||||||
"initial_layer_infill_speed": "30",
|
|
||||||
"initial_layer_travel_speed": "50",
|
|
||||||
"outer_wall_speed": "45",
|
|
||||||
"inner_wall_speed": "45",
|
|
||||||
"small_perimeter_speed": "45",
|
|
||||||
"small_perimeter_threshold": "45",
|
|
||||||
"sparse_infill_speed": "45",
|
|
||||||
"internal_solid_infill_speed": "45",
|
|
||||||
"top_surface_speed": "45",
|
|
||||||
"gap_infill_speed": "45",
|
|
||||||
"support_speed": "45",
|
|
||||||
"support_interface_speed": "45",
|
|
||||||
"travel_speed": "300",
|
|
||||||
"standby_temperature_delta": "-55",
|
|
||||||
"support_top_z_distance": "0.42",
|
"support_top_z_distance": "0.42",
|
||||||
"support_bottom_z_distance": "0.42"
|
"support_bottom_z_distance": "0.42"
|
||||||
}
|
}
|
||||||
@@ -0,0 +1,26 @@
|
|||||||
|
{
|
||||||
|
"type": "process",
|
||||||
|
"setting_id": "fgf_08_06",
|
||||||
|
"name": "0.6 Standard",
|
||||||
|
"from": "system",
|
||||||
|
"inherits": "fgf_process_re3D_common",
|
||||||
|
"instantiation": "true",
|
||||||
|
"layer_height": "0.6",
|
||||||
|
"initial_layer_print_height": "0.8",
|
||||||
|
"line_width": "1.0",
|
||||||
|
"outer_wall_line_width": "1.0",
|
||||||
|
"inner_wall_line_width": "1.0",
|
||||||
|
"sparse_infill_line_width": "1.0",
|
||||||
|
"internal_solid_infill_line_width": "1.0",
|
||||||
|
"top_surface_line_width": "1.0",
|
||||||
|
"support_line_width": "1.0",
|
||||||
|
"initial_layer_line_width": "1.0",
|
||||||
|
"support_top_z_distance": "0",
|
||||||
|
"top_shell_layers": "5",
|
||||||
|
"support_bottom_z_distance": "0",
|
||||||
|
"compatible_printers": [
|
||||||
|
"re3D GigabotX 2 0.8 nozzle",
|
||||||
|
"re3D GigabotX 2 XLT 0.8 nozzle",
|
||||||
|
"re3D TerabotX 2 0.8 nozzle"
|
||||||
|
]
|
||||||
|
}
|
||||||
@@ -1,16 +1,27 @@
|
|||||||
{
|
{
|
||||||
"type": "process",
|
"type": "process",
|
||||||
"setting_id": "GP004",
|
"setting_id": "fgf_175_10",
|
||||||
"name": "1.0mm Standard @re3D fgf 1.75",
|
"name": "1.0 Standard",
|
||||||
|
"renamed_from": "1.0mm Standard @re3D fgf 1.75",
|
||||||
"from": "system",
|
"from": "system",
|
||||||
"inherits": "fgf_process_re3D_common",
|
"inherits": "fgf_process_re3D_common",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"layer_height": "1.0",
|
"layer_height": "1.0",
|
||||||
"bottom_shell_layers": "2",
|
"initial_layer_print_height": "1.0",
|
||||||
"top_shell_layers": "5",
|
"line_width": "1.9",
|
||||||
|
"outer_wall_line_width": "1.9",
|
||||||
|
"inner_wall_line_width": "1.9",
|
||||||
|
"initial_layer_line_width": "1.9",
|
||||||
|
"sparse_infill_line_width": "1.9",
|
||||||
|
"internal_solid_infill_line_width": "1.9",
|
||||||
|
"top_surface_line_width": "1.9",
|
||||||
|
"support_line_width": "1.9",
|
||||||
|
"support_top_z_distance": "0",
|
||||||
|
"support_bottom_z_distance": "0",
|
||||||
|
"top_shell_layers": "3",
|
||||||
"compatible_printers": [
|
"compatible_printers": [
|
||||||
"re3D Gigabot X2 1.75 nozzle",
|
"re3D GigabotX 2 1.75 nozzle",
|
||||||
"re3D Gigabot X2 XLT 1.75 nozzle",
|
"re3D GigabotX 2 XLT 1.75 nozzle",
|
||||||
"re3D Terabot X2 1.75 nozzle"
|
"re3D TerabotX 2 1.75 nozzle"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -6,33 +6,33 @@
|
|||||||
"adaptive_layer_height": "0",
|
"adaptive_layer_height": "0",
|
||||||
"reduce_crossing_wall": "0",
|
"reduce_crossing_wall": "0",
|
||||||
"bridge_flow": "0.95",
|
"bridge_flow": "0.95",
|
||||||
"bridge_speed": "25",
|
"bridge_speed": "10",
|
||||||
"brim_width": "5",
|
"brim_width": "5",
|
||||||
"compatible_printers": [],
|
"compatible_printers": [],
|
||||||
"print_sequence": "by layer",
|
"print_sequence": "by layer",
|
||||||
"default_acceleration": "10000",
|
"default_acceleration": "0",
|
||||||
"bridge_no_support": "0",
|
"bridge_no_support": "0",
|
||||||
"elefant_foot_compensation": "0.1",
|
"elefant_foot_compensation": "0.1",
|
||||||
"outer_wall_line_width": "0.4",
|
"outer_wall_line_width": "0.4",
|
||||||
"outer_wall_speed": "120",
|
"outer_wall_speed": "25",
|
||||||
"line_width": "0.45",
|
"line_width": "0.4",
|
||||||
"infill_direction": "45",
|
"infill_direction": "45",
|
||||||
"sparse_infill_density": "15%",
|
"sparse_infill_density": "15%",
|
||||||
"sparse_infill_pattern": "crosshatch",
|
"sparse_infill_pattern": "crosshatch",
|
||||||
"initial_layer_line_width": "0.42",
|
"initial_layer_line_width": "0.4",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"initial_layer_speed": "20",
|
"initial_layer_speed": "15",
|
||||||
"gap_infill_speed": "30",
|
"gap_infill_speed": "25",
|
||||||
"infill_combination": "0",
|
"infill_combination": "0",
|
||||||
"sparse_infill_line_width": "0.45",
|
"sparse_infill_line_width": "0.4",
|
||||||
"infill_wall_overlap": "25%",
|
"infill_wall_overlap": "25%",
|
||||||
"sparse_infill_speed": "50",
|
"sparse_infill_speed": "70",
|
||||||
"interface_shells": "0",
|
"interface_shells": "0",
|
||||||
"detect_overhang_wall": "0",
|
"detect_overhang_wall": "0",
|
||||||
"reduce_infill_retraction": "0",
|
"reduce_infill_retraction": "0",
|
||||||
"filename_format": "{input_filename_base}.gcode",
|
"filename_format": "{input_filename_base}.gcode",
|
||||||
"wall_loops": "3",
|
"wall_loops": "3",
|
||||||
"inner_wall_line_width": "0.45",
|
"inner_wall_line_width": "0.4",
|
||||||
"inner_wall_speed": "40",
|
"inner_wall_speed": "40",
|
||||||
"print_settings_id": "",
|
"print_settings_id": "",
|
||||||
"raft_layers": "0",
|
"raft_layers": "0",
|
||||||
@@ -40,16 +40,16 @@
|
|||||||
"skirt_distance": "2",
|
"skirt_distance": "2",
|
||||||
"skirt_height": "2",
|
"skirt_height": "2",
|
||||||
"minimum_sparse_infill_area": "0",
|
"minimum_sparse_infill_area": "0",
|
||||||
"internal_solid_infill_line_width": "0.45",
|
"internal_solid_infill_line_width": "0.4",
|
||||||
"internal_solid_infill_speed": "40",
|
"internal_solid_infill_speed": "60",
|
||||||
"spiral_mode": "0",
|
"spiral_mode": "0",
|
||||||
"standby_temperature_delta": "-5",
|
"standby_temperature_delta": "-20",
|
||||||
"enable_support": "0",
|
"enable_support": "0",
|
||||||
"support_filament": "0",
|
"support_filament": "0",
|
||||||
"support_line_width": "0.42",
|
"support_line_width": "0.38",
|
||||||
"support_interface_filament": "0",
|
"support_interface_filament": "0",
|
||||||
"support_on_build_plate_only": "0",
|
"support_on_build_plate_only": "0",
|
||||||
"support_top_z_distance": "0.15",
|
"support_top_z_distance": "0.2",
|
||||||
"support_interface_loop_pattern": "0",
|
"support_interface_loop_pattern": "0",
|
||||||
"support_interface_top_layers": "2",
|
"support_interface_top_layers": "2",
|
||||||
"support_interface_spacing": "0",
|
"support_interface_spacing": "0",
|
||||||
@@ -61,9 +61,9 @@
|
|||||||
"support_object_xy_distance": "0.5",
|
"support_object_xy_distance": "0.5",
|
||||||
"detect_thin_wall": "0",
|
"detect_thin_wall": "0",
|
||||||
"top_surface_line_width": "0.4",
|
"top_surface_line_width": "0.4",
|
||||||
"top_surface_speed": "30",
|
"top_surface_speed": "35",
|
||||||
"travel_speed": "400",
|
"travel_speed": "150",
|
||||||
"enable_prime_tower": "0",
|
"enable_prime_tower": "1",
|
||||||
"prime_tower_width": "60",
|
"prime_tower_width": "60",
|
||||||
"xy_hole_compensation": "0",
|
"xy_hole_compensation": "0",
|
||||||
"xy_contour_compensation": "0"
|
"xy_contour_compensation": "0"
|
||||||
|
|||||||
@@ -5,120 +5,112 @@
|
|||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"inherits": "fdm_process_common",
|
"inherits": "fdm_process_common",
|
||||||
"adaptive_layer_height": "0",
|
"adaptive_layer_height": "0",
|
||||||
"reduce_crossing_wall": "0",
|
"reduce_crossing_wall": "1",
|
||||||
|
"bridge_flow": "0.985",
|
||||||
|
"bridge_speed": "25",
|
||||||
|
"brim_width": "8",
|
||||||
|
"print_sequence": "by layer",
|
||||||
|
"default_acceleration": "5000",
|
||||||
|
"bridge_no_support": "0",
|
||||||
|
"elefant_foot_compensation": "0",
|
||||||
|
"outer_wall_speed": "120",
|
||||||
|
"sparse_infill_density": "15%",
|
||||||
|
"sparse_infill_pattern": "rectilinear",
|
||||||
|
"initial_layer_speed": "50",
|
||||||
|
"gap_infill_speed": "30",
|
||||||
|
"infill_combination": "0",
|
||||||
|
"infill_wall_overlap": "25%",
|
||||||
|
"sparse_infill_speed": "50",
|
||||||
|
"detect_overhang_wall": "1",
|
||||||
|
"reduce_infill_retraction": "0",
|
||||||
|
"filename_format": "{input_filename_base}.gcode",
|
||||||
|
"wall_loops": "3",
|
||||||
|
"inner_wall_speed": "40",
|
||||||
|
"wall_generator": "arachne",
|
||||||
|
"raft_layers": "0",
|
||||||
|
"seam_position": "nearest",
|
||||||
|
"skirt_distance": "8",
|
||||||
|
"skirt_height": "1",
|
||||||
|
"minimum_sparse_infill_area": "0",
|
||||||
|
"internal_solid_infill_speed": "40",
|
||||||
|
"spiral_mode": "0",
|
||||||
|
"standby_temperature_delta": "-75",
|
||||||
|
"enable_support": "1",
|
||||||
|
"support_filament": "0",
|
||||||
|
"support_interface_filament": "0",
|
||||||
|
"support_on_build_plate_only": "0",
|
||||||
|
"support_interface_loop_pattern": "0",
|
||||||
|
"support_interface_top_layers": "2",
|
||||||
|
"support_interface_spacing": "0.05",
|
||||||
|
"support_interface_speed": "80",
|
||||||
|
"support_base_pattern": "rectilinear",
|
||||||
|
"support_base_pattern_spacing": "2",
|
||||||
|
"support_speed": "40",
|
||||||
|
"support_threshold_angle": "30",
|
||||||
|
"support_object_xy_distance": "0.5",
|
||||||
|
"detect_thin_wall": "0",
|
||||||
|
"top_surface_speed": "30",
|
||||||
|
"travel_speed": "300",
|
||||||
|
"enable_prime_tower": "0",
|
||||||
|
"prime_tower_width": "60",
|
||||||
|
"xy_hole_compensation": "0",
|
||||||
|
"xy_contour_compensation": "0",
|
||||||
"max_travel_detour_distance": "0",
|
"max_travel_detour_distance": "0",
|
||||||
"bottom_surface_pattern": "monotonic",
|
"bottom_surface_pattern": "monotonic",
|
||||||
"bottom_shell_layers": "3",
|
"bottom_shell_layers": "3",
|
||||||
"bottom_shell_thickness": "0",
|
"bottom_shell_thickness": "0",
|
||||||
"bridge_flow": "1",
|
|
||||||
"bridge_speed": "25",
|
|
||||||
"brim_width": "8",
|
|
||||||
"brim_object_gap": "0.1",
|
"brim_object_gap": "0.1",
|
||||||
"compatible_printers_condition": "",
|
"compatible_printers_condition": "",
|
||||||
"print_sequence": "by layer",
|
|
||||||
"default_acceleration": "5500",
|
|
||||||
"top_surface_acceleration": "500",
|
"top_surface_acceleration": "500",
|
||||||
"bridge_no_support": "0",
|
|
||||||
"draft_shield": "disabled",
|
"draft_shield": "disabled",
|
||||||
"elefant_foot_compensation": "0.0",
|
"enable_arc_fitting": "1",
|
||||||
"enable_arc_fitting": "0",
|
|
||||||
"outer_wall_line_width": "0.44",
|
|
||||||
"wall_infill_order": "inner wall/outer wall/infill",
|
"wall_infill_order": "inner wall/outer wall/infill",
|
||||||
"line_width": "0.44",
|
|
||||||
"infill_direction": "45",
|
"infill_direction": "45",
|
||||||
"sparse_infill_density": "10%",
|
|
||||||
"sparse_infill_pattern": "gyroid",
|
|
||||||
"initial_layer_acceleration": "500",
|
"initial_layer_acceleration": "500",
|
||||||
"travel_acceleration": "5500",
|
"travel_acceleration": "5000",
|
||||||
"inner_wall_acceleration": "5500",
|
"inner_wall_acceleration": "5000",
|
||||||
"initial_layer_line_width": "0.6",
|
|
||||||
"initial_layer_print_height": "0.4",
|
|
||||||
"infill_combination": "0",
|
|
||||||
"sparse_infill_line_width": "0.44",
|
|
||||||
"infill_wall_overlap": "25%",
|
|
||||||
"interface_shells": "0",
|
"interface_shells": "0",
|
||||||
"ironing_flow": "10%",
|
"ironing_flow": "10%",
|
||||||
"ironing_spacing": "0.1",
|
"ironing_spacing": "0.1",
|
||||||
"ironing_speed": "20",
|
"ironing_speed": "20",
|
||||||
"ironing_type": "no ironing",
|
"ironing_type": "no ironing",
|
||||||
"layer_height": "0.2",
|
|
||||||
"reduce_infill_retraction": "0",
|
|
||||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
|
||||||
"detect_overhang_wall": "1",
|
|
||||||
"overhang_1_4_speed": "45",
|
"overhang_1_4_speed": "45",
|
||||||
"overhang_2_4_speed": "35",
|
"overhang_2_4_speed": "35",
|
||||||
"overhang_3_4_speed": "25",
|
"overhang_3_4_speed": "25",
|
||||||
"overhang_4_4_speed": "15",
|
"overhang_4_4_speed": "15",
|
||||||
"inner_wall_line_width": "0.44",
|
"print_settings_id": "fdm_process_re3D_common",
|
||||||
"wall_loops": "2",
|
"skirt_loops": "2",
|
||||||
"print_settings_id": "",
|
"resolution": "0.0",
|
||||||
"raft_layers": "0",
|
|
||||||
"seam_position": "aligned",
|
|
||||||
"skirt_distance": "10",
|
|
||||||
"skirt_height": "1",
|
|
||||||
"skirt_loops": "3",
|
|
||||||
"minimum_sparse_infill_area": "15",
|
|
||||||
"internal_solid_infill_line_width": "0.44",
|
|
||||||
"spiral_mode": "0",
|
|
||||||
"standby_temperature_delta": "-5",
|
|
||||||
"enable_support": "1",
|
|
||||||
"resolution": "0.012",
|
|
||||||
"support_type": "normal(auto)",
|
"support_type": "normal(auto)",
|
||||||
"support_style": "snug",
|
"support_style": "snug",
|
||||||
"support_on_build_plate_only": "0",
|
"support_interface_bottom_layers": "2",
|
||||||
"support_top_z_distance": "0.22",
|
|
||||||
"support_bottom_z_distance": "0.22",
|
|
||||||
"support_filament": "0",
|
|
||||||
"support_line_width": "0.44",
|
|
||||||
"support_interface_loop_pattern": "0",
|
|
||||||
"support_interface_filament": "0",
|
|
||||||
"support_interface_top_layers": "3",
|
|
||||||
"support_interface_bottom_layers": "1",
|
|
||||||
"support_interface_spacing": "0.5",
|
|
||||||
"support_interface_speed": "45",
|
|
||||||
"support_base_pattern": "rectilinear",
|
|
||||||
"support_base_pattern_spacing": "2.5",
|
|
||||||
"support_speed": "45",
|
|
||||||
"support_threshold_angle": "30",
|
|
||||||
"support_object_xy_distance": "0.35",
|
|
||||||
"tree_support_branch_angle": "45",
|
"tree_support_branch_angle": "45",
|
||||||
"tree_support_wall_count": "0",
|
"tree_support_wall_count": "0",
|
||||||
"detect_thin_wall": "0",
|
|
||||||
"top_surface_pattern": "monotonicline",
|
"top_surface_pattern": "monotonicline",
|
||||||
"top_surface_line_width": "0.44",
|
|
||||||
"top_shell_layers": "4",
|
"top_shell_layers": "4",
|
||||||
"top_shell_thickness": "0.6",
|
"top_shell_thickness": "0.6",
|
||||||
"initial_layer_speed": "30",
|
"initial_layer_infill_speed": "50",
|
||||||
"initial_layer_infill_speed": "30",
|
|
||||||
"outer_wall_speed": "45",
|
|
||||||
"inner_wall_speed": "45",
|
|
||||||
"internal_solid_infill_speed": "45",
|
|
||||||
"top_surface_speed": "45",
|
|
||||||
"gap_infill_speed": "45",
|
|
||||||
"sparse_infill_speed": "45",
|
|
||||||
"travel_speed": "300",
|
|
||||||
"enable_prime_tower": "1",
|
|
||||||
"wipe_tower_no_sparse_layers": "0",
|
"wipe_tower_no_sparse_layers": "0",
|
||||||
"prime_tower_width": "30",
|
"precise_outer_wall": "0",
|
||||||
"xy_hole_compensation": "0",
|
|
||||||
"xy_contour_compensation": "0",
|
|
||||||
"precise_outer_wall": "1",
|
|
||||||
"outer_wall_acceleration": "2500",
|
"outer_wall_acceleration": "2500",
|
||||||
"bridge_acceleration": "5500",
|
"bridge_acceleration": "5000",
|
||||||
"sparse_infill_acceleration": "5500",
|
"sparse_infill_acceleration": "5000",
|
||||||
"internal_solid_infill_acceleration": "5500",
|
"internal_solid_infill_acceleration": "5000",
|
||||||
"accel_to_decel_enable": "0",
|
"accel_to_decel_enable": "0",
|
||||||
"prime_volume": "200",
|
"prime_volume": "200",
|
||||||
"ooze_prevention": "1",
|
"ooze_prevention": "1",
|
||||||
"preheat_time": "30",
|
"preheat_time": "30",
|
||||||
"initial_layer_travel_speed": "50",
|
"initial_layer_travel_speed": "100",
|
||||||
"slow_down_layers": "2",
|
"slow_down_layers": "2",
|
||||||
"small_perimeter_speed": "45",
|
"small_perimeter_speed": "20",
|
||||||
"small_perimeter_threshold": "45",
|
"small_perimeter_threshold": "10",
|
||||||
"exclude_object": "1",
|
"exclude_object": "1",
|
||||||
"compatible_printers": [
|
"compatible_printers": [
|
||||||
"re3D Gigabot 4 0.4 nozzle",
|
"re3D Gigabot 4 0.4 nozzle",
|
||||||
|
"re3D Gigabot 4 0.8 nozzle",
|
||||||
"re3D Gigabot 4 XLT 0.4 nozzle",
|
"re3D Gigabot 4 XLT 0.4 nozzle",
|
||||||
"re3D Terabot 4 0.4 nozzle"
|
"re3D Gigabot 4 XLT 0.8 nozzle",
|
||||||
|
"re3D Terabot 4 0.4 nozzle",
|
||||||
|
"re3D Terabot 4 0.8 nozzle"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -7,71 +7,61 @@
|
|||||||
"adaptive_layer_height": "0",
|
"adaptive_layer_height": "0",
|
||||||
"reduce_crossing_wall": "1",
|
"reduce_crossing_wall": "1",
|
||||||
"max_travel_detour_distance": "0",
|
"max_travel_detour_distance": "0",
|
||||||
"bottom_surface_pattern": "monotonic",
|
"bottom_surface_pattern": "monotonicline",
|
||||||
"bottom_shell_layers": "2",
|
"bottom_shell_layers": "2",
|
||||||
"bottom_shell_thickness": "0",
|
"bottom_shell_thickness": "0",
|
||||||
"bridge_speed": "40",
|
"bridge_speed": "40",
|
||||||
"brim_type": "no_brim",
|
"brim_type": "no_brim",
|
||||||
"brim_width": "5",
|
"brim_width": "5",
|
||||||
"brim_object_gap": "0.1",
|
"brim_object_gap": "0.1",
|
||||||
"compatible_printers_condition": "",
|
|
||||||
"print_sequence": "by layer",
|
"print_sequence": "by layer",
|
||||||
"default_acceleration": "500",
|
"default_acceleration": "2500",
|
||||||
"top_surface_acceleration": "500",
|
"top_surface_acceleration": "500",
|
||||||
"bridge_no_support": "0",
|
"bridge_no_support": "0",
|
||||||
"draft_shield": "disabled",
|
"draft_shield": "disabled",
|
||||||
"elefant_foot_compensation": "0",
|
"elefant_foot_compensation": "0",
|
||||||
"enable_arc_fitting": "1",
|
"enable_arc_fitting": "1",
|
||||||
"outer_wall_line_width": "1.9",
|
|
||||||
"wall_infill_order": "inner wall/outer wall/infill",
|
"wall_infill_order": "inner wall/outer wall/infill",
|
||||||
"line_width": "1.9",
|
|
||||||
"infill_direction": "45",
|
"infill_direction": "45",
|
||||||
"sparse_infill_density": "20%",
|
"sparse_infill_density": "20%",
|
||||||
"sparse_infill_pattern": "gyroid",
|
"sparse_infill_pattern": "rectilinear",
|
||||||
"initial_layer_acceleration": "500",
|
"initial_layer_acceleration": "500",
|
||||||
"travel_acceleration": "700",
|
"travel_acceleration": "2500",
|
||||||
"inner_wall_acceleration": "500",
|
"inner_wall_acceleration": "2500",
|
||||||
"initial_layer_line_width": "1.9",
|
|
||||||
"initial_layer_print_height": "1",
|
|
||||||
"infill_combination": "0",
|
"infill_combination": "0",
|
||||||
"sparse_infill_line_width": "1.9",
|
|
||||||
"infill_wall_overlap": "50%",
|
"infill_wall_overlap": "50%",
|
||||||
"wall_generator": "classic",
|
"wall_generator": "arachne",
|
||||||
"interface_shells": "0",
|
"interface_shells": "0",
|
||||||
"ironing_flow": "15%",
|
"ironing_flow": "15%",
|
||||||
"ironing_spacing": "0.1",
|
"ironing_spacing": "0.1",
|
||||||
"ironing_speed": "15",
|
"ironing_speed": "15",
|
||||||
"ironing_type": "no ironing",
|
"ironing_type": "no ironing",
|
||||||
"layer_height": "1",
|
|
||||||
"reduce_infill_retraction": "1",
|
"reduce_infill_retraction": "1",
|
||||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
"filename_format": "{input_filename_base}.gcode",
|
||||||
"detect_overhang_wall": "1",
|
"detect_overhang_wall": "1",
|
||||||
"overhang_1_4_speed": "0",
|
"overhang_1_4_speed": "0",
|
||||||
"overhang_2_4_speed": "20",
|
"overhang_2_4_speed": "20",
|
||||||
"overhang_3_4_speed": "15",
|
"overhang_3_4_speed": "15",
|
||||||
"overhang_4_4_speed": "10",
|
"overhang_4_4_speed": "10",
|
||||||
"inner_wall_line_width": "1.9",
|
|
||||||
"wall_loops": "2",
|
"wall_loops": "2",
|
||||||
"print_settings_id": "",
|
"print_settings_id": "fgf_process_re3D_common",
|
||||||
"raft_layers": "0",
|
"raft_layers": "0",
|
||||||
"seam_position": "aligned",
|
"seam_position": "aligned",
|
||||||
"seam_gap": "0",
|
"seam_gap": "10",
|
||||||
"staggered_inner_seams": "1",
|
"staggered_inner_seams": "1",
|
||||||
"skirt_distance": "2",
|
"skirt_distance": "10",
|
||||||
"skirt_height": "1",
|
"skirt_height": "1",
|
||||||
"skirt_loops": "3",
|
"skirt_loops": "3",
|
||||||
"minimum_sparse_infill_area": "15",
|
"minimum_sparse_infill_area": "15",
|
||||||
"internal_solid_infill_line_width": "1.9",
|
|
||||||
"spiral_mode": "0",
|
"spiral_mode": "0",
|
||||||
"standby_temperature_delta": "-5",
|
"standby_temperature_delta": "0",
|
||||||
"enable_support": "0",
|
"enable_support": "0",
|
||||||
"resolution": "0.012",
|
"resolution": "0.0",
|
||||||
"support_type": "normal(auto)",
|
"support_type": "normal(auto)",
|
||||||
"support_style": "default",
|
"support_style": "default",
|
||||||
"support_on_build_plate_only": "0",
|
"support_on_build_plate_only": "0",
|
||||||
"support_top_z_distance": "0.2",
|
"support_top_z_distance": "0.2",
|
||||||
"support_filament": "0",
|
"support_filament": "0",
|
||||||
"support_line_width": "1.9",
|
|
||||||
"support_interface_loop_pattern": "0",
|
"support_interface_loop_pattern": "0",
|
||||||
"support_interface_filament": "0",
|
"support_interface_filament": "0",
|
||||||
"support_interface_top_layers": "2",
|
"support_interface_top_layers": "2",
|
||||||
@@ -80,14 +70,13 @@
|
|||||||
"support_interface_speed": "100",
|
"support_interface_speed": "100",
|
||||||
"support_base_pattern": "rectilinear",
|
"support_base_pattern": "rectilinear",
|
||||||
"support_base_pattern_spacing": "2.5",
|
"support_base_pattern_spacing": "2.5",
|
||||||
"support_speed": "150",
|
"support_speed": "50",
|
||||||
"support_threshold_angle": "30",
|
"support_threshold_angle": "30",
|
||||||
"support_object_xy_distance": "0.35",
|
"support_object_xy_distance": "0.35",
|
||||||
"tree_support_branch_angle": "45",
|
"tree_support_branch_angle": "45",
|
||||||
"tree_support_wall_count": "0",
|
"tree_support_wall_count": "0",
|
||||||
"detect_thin_wall": "0",
|
"detect_thin_wall": "0",
|
||||||
"top_surface_pattern": "monotonic",
|
"top_surface_pattern": "monotonic",
|
||||||
"top_surface_line_width": "1.9",
|
|
||||||
"top_shell_layers": "4",
|
"top_shell_layers": "4",
|
||||||
"top_shell_thickness": "0",
|
"top_shell_thickness": "0",
|
||||||
"initial_layer_speed": "30",
|
"initial_layer_speed": "30",
|
||||||
@@ -106,6 +95,7 @@
|
|||||||
"xy_contour_compensation": "0",
|
"xy_contour_compensation": "0",
|
||||||
"infill_anchor": "2mm",
|
"infill_anchor": "2mm",
|
||||||
"ensure_vertical_shell_thickness": "none",
|
"ensure_vertical_shell_thickness": "none",
|
||||||
|
"accel_to_decel_enable": "0",
|
||||||
"slow_down_layers": "1",
|
"slow_down_layers": "1",
|
||||||
"default_jerk": "5",
|
"default_jerk": "5",
|
||||||
"outer_wall_jerk": "9",
|
"outer_wall_jerk": "9",
|
||||||
@@ -115,8 +105,11 @@
|
|||||||
"first_layer_jerk": "9",
|
"first_layer_jerk": "9",
|
||||||
"travel_jerk": "9",
|
"travel_jerk": "9",
|
||||||
"compatible_printers": [
|
"compatible_printers": [
|
||||||
"re3D Gigabot X2 1.75 nozzle",
|
"re3D GigabotX 2 0.8 nozzle",
|
||||||
"re3D Gigabot X2 XLT 1.75 nozzle",
|
"re3D GigabotX 2 1.75 nozzle",
|
||||||
"re3D Terabot X2 1.75 nozzle"
|
"re3D GigabotX 2 XLT 0.8 nozzle",
|
||||||
|
"re3D GigabotX 2 XLT 1.75 nozzle",
|
||||||
|
"re3D TerabotX 2 0.8 nozzle",
|
||||||
|
"re3D TerabotX 2 1.75 nozzle"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
@@ -2871,6 +2871,14 @@ void PresetBundle::load_selections(AppConfig &config, const PresetPreferences& p
|
|||||||
|
|
||||||
if (use_default_nozzle_volume_type) {
|
if (use_default_nozzle_volume_type) {
|
||||||
project_config.option<ConfigOptionEnumsGeneric>("nozzle_volume_type")->values = current_printer.config.option<ConfigOptionEnumsGeneric>("default_nozzle_volume_type")->values;
|
project_config.option<ConfigOptionEnumsGeneric>("nozzle_volume_type")->values = current_printer.config.option<ConfigOptionEnumsGeneric>("default_nozzle_volume_type")->values;
|
||||||
|
} else {
|
||||||
|
// Orca: make sure `nozzle_volume_type` not shorter than `default_nozzle_volume_type`, otherwise we got array out of bound access
|
||||||
|
// later in `Tab::switch_excluder`
|
||||||
|
auto& opt = project_config.option<ConfigOptionEnumsGeneric>("nozzle_volume_type")->values;
|
||||||
|
const auto& opt_default = current_printer.config.option<ConfigOptionEnumsGeneric>("default_nozzle_volume_type")->values;
|
||||||
|
while (opt.size() < opt_default.size()) {
|
||||||
|
opt.emplace_back(opt_default[opt.size()]);
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
// Parse the initial physical printer name.
|
// Parse the initial physical printer name.
|
||||||
|
|||||||
@@ -138,7 +138,7 @@ static const std::unordered_map<std::string, std::vector<std::string>> printer_m
|
|||||||
"RatRig V-Core 4 IDEX 400", "RatRig V-Core 4 IDEX 400 COPY MODE", "RatRig V-Core 4 IDEX 400 MIRROR MODE", "RatRig V-Core 4 IDEX 500", "RatRig V-Core 4 IDEX 500 COPY MODE",
|
"RatRig V-Core 4 IDEX 400", "RatRig V-Core 4 IDEX 400 COPY MODE", "RatRig V-Core 4 IDEX 400 MIRROR MODE", "RatRig V-Core 4 IDEX 500", "RatRig V-Core 4 IDEX 500 COPY MODE",
|
||||||
"RatRig V-Core 4 IDEX 500 MIRROR MODE"}},
|
"RatRig V-Core 4 IDEX 500 MIRROR MODE"}},
|
||||||
{"re3D", {"re3D Gigabot 4", "re3D Gigabot 4 XLT", "re3D Terabot 4",
|
{"re3D", {"re3D Gigabot 4", "re3D Gigabot 4 XLT", "re3D Terabot 4",
|
||||||
"re3D Gigabot X2", "re3D Gigabot X2 XLT", "re3D Terabot X2"}},
|
"re3D GigabotX 2", "re3D GigabotX 2 XLT", "re3D TerabotX 2"}},
|
||||||
{"RolohaunDesign", {"Rook MK1 LDO"}},
|
{"RolohaunDesign", {"Rook MK1 LDO"}},
|
||||||
{"SecKit", {"SecKit SK-Tank", "Seckit Go3"}},
|
{"SecKit", {"SecKit SK-Tank", "Seckit Go3"}},
|
||||||
{"Snapmaker", {"Snapmaker J1", "Snapmaker A250", "Snapmaker A350", "Snapmaker A250 Dual", "Snapmaker A350 Dual",
|
{"Snapmaker", {"Snapmaker J1", "Snapmaker A250", "Snapmaker A350", "Snapmaker A250 Dual", "Snapmaker A350 Dual",
|
||||||
|
|||||||
@@ -3349,6 +3349,8 @@ bool GUI_App::on_init_network(bool try_backup)
|
|||||||
std::string country_code = app_config->get_country_code();
|
std::string country_code = app_config->get_country_code();
|
||||||
m_agent->set_country_code(country_code);
|
m_agent->set_country_code(country_code);
|
||||||
m_agent->start();
|
m_agent->start();
|
||||||
|
// Orca: disable Bambu telemetry up-front (before any login) so it never starts.
|
||||||
|
check_track_enable();
|
||||||
}
|
}
|
||||||
|
|
||||||
// When using Orca cloud alongside the BBL network plugin, the BBL DLL agent still
|
// When using Orca cloud alongside the BBL network plugin, the BBL DLL agent still
|
||||||
@@ -3365,6 +3367,12 @@ bool GUI_App::on_init_network(bool try_backup)
|
|||||||
bbl.init_log();
|
bbl.init_log();
|
||||||
bbl.set_cert_file(resources_dir() + "/cert", "slicer_base64.cer");
|
bbl.set_cert_file(resources_dir() + "/cert", "slicer_base64.cer");
|
||||||
bbl.set_country_code(app_config->get_country_code());
|
bbl.set_country_code(app_config->get_country_code());
|
||||||
|
// Orca: disable Bambu telemetry before start() so the DLL never spins up tracking
|
||||||
|
// workers. This covers the case where the BBL plugin is loaded for LAN discovery
|
||||||
|
// but the user has not registered BBL_CLOUD_PROVIDER (so m_agent->track_enable
|
||||||
|
// would not reach this DLL instance).
|
||||||
|
bbl.track_enable(false);
|
||||||
|
bbl.track_remove_files();
|
||||||
bbl.start();
|
bbl.start();
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
@@ -4970,7 +4978,7 @@ void GUI_App::on_user_login_handle(wxCommandEvent &evt)
|
|||||||
|
|
||||||
void GUI_App::check_track_enable()
|
void GUI_App::check_track_enable()
|
||||||
{
|
{
|
||||||
// Orca: alaways disable track event
|
// Orca: telemetry only exists on the BBL cloud agent; always disable it.
|
||||||
if (m_agent) {
|
if (m_agent) {
|
||||||
m_agent->track_enable(false);
|
m_agent->track_enable(false);
|
||||||
m_agent->track_remove_files();
|
m_agent->track_remove_files();
|
||||||
@@ -5855,15 +5863,59 @@ void GUI_App::reload_settings()
|
|||||||
if (is_closing() || !preset_bundle || !app_config || !mainframe)
|
if (is_closing() || !preset_bundle || !app_config || !mainframe)
|
||||||
return;
|
return;
|
||||||
|
|
||||||
|
// Snapshot each collection's edited config BEFORE any mutation.
|
||||||
|
// load_pending_vendors() via apply_vendor_config() can call select_preset(0)
|
||||||
|
// resetting all selections to defaults and overwriting m_edited_preset.
|
||||||
|
// The cloud load_user_presets() can also trigger select_preset() via
|
||||||
|
// remove_users_preset() and overwrite m_edited_preset.config via load_user_preset().
|
||||||
|
struct PresetSnapshot { std::string name; DynamicPrintConfig config; bool dirty; };
|
||||||
|
auto snapshot_collection = [](const PresetCollection& col) -> PresetSnapshot {
|
||||||
|
auto& sel = col.get_selected_preset();
|
||||||
|
auto& ed = col.get_edited_preset();
|
||||||
|
return {sel.name, ed.config, sel.is_dirty};
|
||||||
|
};
|
||||||
|
PresetSnapshot print_snap = snapshot_collection(preset_bundle->prints);
|
||||||
|
PresetSnapshot filament_snap = snapshot_collection(preset_bundle->filaments);
|
||||||
|
PresetSnapshot printer_snap = snapshot_collection(preset_bundle->printers);
|
||||||
|
|
||||||
// Check the user presets for any system vendors that need to be installed
|
// Check the user presets for any system vendors that need to be installed
|
||||||
for (auto data : user_presets) {
|
for (auto data : user_presets) {
|
||||||
if (!check_preset_parent_available(data))
|
if (!check_preset_parent_available(data))
|
||||||
add_pending_vendor_preset(data);
|
add_pending_vendor_preset(data);
|
||||||
}
|
}
|
||||||
load_pending_vendors();
|
load_pending_vendors();
|
||||||
|
|
||||||
preset_bundle->load_user_presets(*app_config, user_presets, ForwardCompatibilitySubstitutionRule::Enable);
|
preset_bundle->load_user_presets(*app_config, user_presets, ForwardCompatibilitySubstitutionRule::Enable);
|
||||||
preset_bundle->save_user_presets(*app_config, get_delete_cache_presets());
|
preset_bundle->save_user_presets(*app_config, get_delete_cache_presets());
|
||||||
|
|
||||||
|
// Re-apply any edited config that was wiped during vendor loading or sync.
|
||||||
|
auto restore_snapshot = [](PresetCollection& col, const PresetSnapshot& snap, const char* label) {
|
||||||
|
auto& ed = col.get_edited_preset();
|
||||||
|
bool changed = !ed.config.equals(snap.config);
|
||||||
|
BOOST_LOG_TRIVIAL(info) << "reload_settings restore " << label
|
||||||
|
<< ": snap_name=" << snap.name << " snap_dirty=" << snap.dirty
|
||||||
|
<< " current_name=" << ed.name << " changed=" << changed;
|
||||||
|
if (!snap.dirty) return; // nothing to protect, let cloud updates stand
|
||||||
|
Preset* p = col.find_preset(snap.name, false, true);
|
||||||
|
if (p && p->name == snap.name) {
|
||||||
|
BOOST_LOG_TRIVIAL(info) << "reload_settings RESTORING " << label
|
||||||
|
<< ": name=" << snap.name;
|
||||||
|
// If the snapshot preset is not currently selected, re-select it first.
|
||||||
|
if (col.get_selected_preset().name != snap.name)
|
||||||
|
col.select_preset_by_name(snap.name, true);
|
||||||
|
ed = col.get_edited_preset();
|
||||||
|
ed.config = snap.config;
|
||||||
|
col.get_selected_preset().is_dirty = snap.dirty;
|
||||||
|
ed.is_dirty = snap.dirty;
|
||||||
|
} else {
|
||||||
|
BOOST_LOG_TRIVIAL(info) << "reload_settings restore " << label
|
||||||
|
<< ": preset not found name=" << snap.name;
|
||||||
|
}
|
||||||
|
};
|
||||||
|
restore_snapshot(preset_bundle->prints, print_snap, "print");
|
||||||
|
restore_snapshot(preset_bundle->filaments, filament_snap, "filament");
|
||||||
|
restore_snapshot(preset_bundle->printers, printer_snap, "printer");
|
||||||
|
|
||||||
// Orca: settings changed, refresh ui to reflect the new preset values
|
// Orca: settings changed, refresh ui to reflect the new preset values
|
||||||
mainframe->update_side_preset_ui();
|
mainframe->update_side_preset_ui();
|
||||||
for (auto tab : tabs_list) {
|
for (auto tab : tabs_list) {
|
||||||
|
|||||||
@@ -1853,6 +1853,14 @@ Sidebar::Sidebar(Plater *parent)
|
|||||||
e.Skip();
|
e.Skip();
|
||||||
});
|
});
|
||||||
w->Bind(wxEVT_LEAVE_WINDOW, [this, panel_color](wxMouseEvent &e) {
|
w->Bind(wxEVT_LEAVE_WINDOW, [this, panel_color](wxMouseEvent &e) {
|
||||||
|
// Orca: if the edit button is already hidden the handler has no
|
||||||
|
// state to change, so skip the expensive wxFindWindowAtPoint tree
|
||||||
|
// walk. Without this guard, when the parent window is on an
|
||||||
|
// inactive Hyprland/Wayland workspace, GTK keeps delivering
|
||||||
|
// synthetic leave events and the Hide()+Layout() below re-enters
|
||||||
|
// the same handler in a feedback loop that pegs a CPU core.
|
||||||
|
// (IsShownOnScreen() can't be used here — see Plater.cpp:9304.)
|
||||||
|
if (!p->btn_edit_printer->IsShown()) { e.Skip(); return; }
|
||||||
// Use event-relative coords instead of wxGetMousePosition() which
|
// Use event-relative coords instead of wxGetMousePosition() which
|
||||||
// returns (0,0) on Wayland for global screen coordinates.
|
// returns (0,0) on Wayland for global screen coordinates.
|
||||||
wxWindow* evtObj = dynamic_cast<wxWindow*>(e.GetEventObject());
|
wxWindow* evtObj = dynamic_cast<wxWindow*>(e.GetEventObject());
|
||||||
|
|||||||
@@ -1172,7 +1172,6 @@ wxBoxSizer* PreferencesDialog::create_item_link_association( wxString url_prefix
|
|||||||
auto checkbox = new ::CheckBox(m_parent);
|
auto checkbox = new ::CheckBox(m_parent);
|
||||||
checkbox->SetToolTip(tooltip);
|
checkbox->SetToolTip(tooltip);
|
||||||
checkbox->SetValue(reg_to_current_instance); // If registered to the current instance, checkbox should be checked
|
checkbox->SetValue(reg_to_current_instance); // If registered to the current instance, checkbox should be checked
|
||||||
checkbox->Enable(!reg_to_current_instance); // Since unregistering isn't supported, checkbox is disabled when checked
|
|
||||||
|
|
||||||
// build text next to checkbox
|
// build text next to checkbox
|
||||||
auto checkbox_title = new wxStaticText(m_parent, wxID_ANY, title, wxDefaultPosition, DESIGN_TITLE_SIZE);
|
auto checkbox_title = new wxStaticText(m_parent, wxID_ANY, title, wxDefaultPosition, DESIGN_TITLE_SIZE);
|
||||||
@@ -1223,8 +1222,10 @@ wxBoxSizer* PreferencesDialog::create_item_link_association( wxString url_prefix
|
|||||||
v_sizer->Add(registered_instance_title, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(DESIGN_LEFT_MARGIN));
|
v_sizer->Add(registered_instance_title, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(DESIGN_LEFT_MARGIN));
|
||||||
|
|
||||||
checkbox->Bind(wxEVT_TOGGLEBUTTON, [=](wxCommandEvent& e) {
|
checkbox->Bind(wxEVT_TOGGLEBUTTON, [=](wxCommandEvent& e) {
|
||||||
wxGetApp().associate_url(url_prefix.ToStdWstring());
|
if (checkbox->GetValue())
|
||||||
checkbox->Disable();
|
wxGetApp().associate_url(url_prefix.ToStdWstring());
|
||||||
|
else
|
||||||
|
wxGetApp().disassociate_url(url_prefix.ToStdWstring());
|
||||||
update_current_association_str();
|
update_current_association_str();
|
||||||
e.Skip();
|
e.Skip();
|
||||||
});
|
});
|
||||||
|
|||||||
@@ -582,21 +582,22 @@ int NetworkAgent::get_my_token(std::string ticket, unsigned int* http_code, std:
|
|||||||
return -1;
|
return -1;
|
||||||
}
|
}
|
||||||
|
|
||||||
int NetworkAgent::track_enable(bool enable, const std::string& provider)
|
int NetworkAgent::track_enable(bool enable)
|
||||||
{
|
{
|
||||||
this->enable_track = enable;
|
// Orca cloud has no telemetry; the only cloud agent that tracks events is BBL.
|
||||||
const auto cloud_agent = get_cloud_agent(provider);
|
this->enable_track = enable;
|
||||||
|
const auto cloud_agent = get_cloud_agent(BBL_CLOUD_PROVIDER);
|
||||||
if (cloud_agent)
|
if (cloud_agent)
|
||||||
return cloud_agent->track_enable(enable);
|
return cloud_agent->track_enable(enable);
|
||||||
return -1;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
int NetworkAgent::track_remove_files(const std::string& provider)
|
int NetworkAgent::track_remove_files()
|
||||||
{
|
{
|
||||||
const auto cloud_agent = get_cloud_agent(provider);
|
const auto cloud_agent = get_cloud_agent(BBL_CLOUD_PROVIDER);
|
||||||
if (cloud_agent)
|
if (cloud_agent)
|
||||||
return cloud_agent->track_remove_files();
|
return cloud_agent->track_remove_files();
|
||||||
return -1;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
int NetworkAgent::track_event(std::string evt_key, std::string content, const std::string& provider)
|
int NetworkAgent::track_event(std::string evt_key, std::string content, const std::string& provider)
|
||||||
|
|||||||
@@ -118,8 +118,9 @@ public:
|
|||||||
int get_model_mall_detail_url(std::string* url, std::string id, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
int get_model_mall_detail_url(std::string* url, std::string id, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
||||||
int get_my_profile(std::string token, unsigned int* http_code, std::string* http_body, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
int get_my_profile(std::string token, unsigned int* http_code, std::string* http_body, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
||||||
int get_my_token(std::string ticket, unsigned int* http_code, std::string* http_body, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
int get_my_token(std::string ticket, unsigned int* http_code, std::string* http_body, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
||||||
int track_enable(bool enable, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
// Orca: telemetry only exists on the BBL cloud agent (Orca cloud has no track events).
|
||||||
int track_remove_files(const std::string& provider = ORCA_CLOUD_PROVIDER);
|
int track_enable(bool enable);
|
||||||
|
int track_remove_files();
|
||||||
int track_event(std::string evt_key, std::string content, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
int track_event(std::string evt_key, std::string content, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
||||||
int track_header(std::string header, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
int track_header(std::string header, const std::string& provider = ORCA_CLOUD_PROVIDER);
|
||||||
int track_update_property(std::string name, std::string value, std::string type = "string", const std::string& provider = ORCA_CLOUD_PROVIDER);
|
int track_update_property(std::string name, std::string value, std::string type = "string", const std::string& provider = ORCA_CLOUD_PROVIDER);
|
||||||
|
|||||||
Reference in New Issue
Block a user