juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-16 18:12:10 +00:00
Code Issues Packages Projects Releases Wiki Activity

Feature/add_snapmaker_u1_profiles (#10225)

Browse Source 
* add snapmaker u1 profiles

* tweak some parameters for U1
This commit is contained in:
SoftFever
2025-07-25 22:25:28 +08:00
committed by GitHub
parent 1ef427f661
commit 68110eeecc
105 changed files with 4619 additions and 221 deletions
Download Patch File Download Diff File Expand all files Collapse all files

199
resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json Normal file
View File

@@ -0,0 +1,199 @@
{
"type": "machine",
"setting_id": "1591507869",
"name": "Snapmaker U1 (0.4 nozzle)",
"from": "system",
"instantiation": "true",
"inherits": "fdm_U1",
"printer_model": "Snapmaker U1",
"printer_variant": "0.4",
"auxiliary_fan": "1",
"change_filament_gcode": "; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\n\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG0 Z1.5 F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"T\" + next_extruder + \"\n\";\n}\nM400\n{if filament_type[next_extruder] == \"PVA\"}\nSET_VELOCITY_LIMIT ACCEL=3000\n{else}\n{endif}",
"extruder_colour": [
"#FCE94F",
"#FCE94F",
"#FCE94F",
"#FCE94F"
],
"extruder_offset": [
"0x0",
"0x0",
"0x0",
"0x0"
],
"host_type": "octoprint",
"is_custom_defined": "0",
"long_retractions_when_cut": [
"0",
"0",
"0",
"0"
],
"machine_end_gcode": " PRINT_END\nTIMELAPSE_STOP",
"machine_max_jerk_z": [
"3",
"0.4"
],
"machine_max_speed_e": [
"30",
"25"
],
"machine_max_speed_z": [
"20",
"12"
],
"machine_tool_change_time": "5",
"max_layer_height": [
"0.32",
"0.32",
"0.32",
"0.32"
],
"min_layer_height": [
"0.08",
"0.08",
"0.08",
"0.08"
],
"nozzle_diameter": [
"0.4",
"0.4",
"0.4",
"0.4"
],
"nozzle_type": "hardened_steel",
"printable_area": [
"-0.5x-1",
"270.5x-1",
"270.5x271",
"-0.5x271"
],
"printable_height": "270",
"printer_settings_id": "MyToolChanger 0.4 nozzle - Copy",
"retract_before_wipe": [
"0%",
"0%",
"0%",
"0%"
],
"retract_length_toolchange": [
"10",
"10",
"10",
"10"
],
"retract_lift_above": [
"0",
"0",
"0",
"0"
],
"retract_lift_below": [
"269",
"269",
"269",
"269"
],
"retract_lift_enforce": [
"All Surfaces",
"All Surfaces",
"All Surfaces",
"All Surfaces"
],
"retract_restart_extra": [
"0",
"0",
"0",
"0"
],
"retract_restart_extra_toolchange": [
"0",
"0",
"0",
"0"
],
"retract_when_changing_layer": [
"1",
"1",
"1",
"1"
],
"retraction_distances_when_cut": [
"18",
"18",
"18",
"18"
],
"retraction_length": [
"0.8",
"0.8",
"0.8",
"0.8"
],
"retraction_minimum_travel": [
"1",
"1",
"1",
"1"
],
"retraction_speed": [
"40",
"40",
"40",
"40"
],
"deretraction_speed": [
"35",
"35",
"35",
"35"
],
"thumbnails": "48x48/PNG, 300x300/PNG",
"travel_slope": [
"3",
"3",
"3",
"3"
],
"version": "2.2.0.4",
"wipe": [
"1",
"1",
"1",
"1"
],
"wipe_distance": [
"2",
"2",
"2",
"2"
],
"z_hop": [
"0.4",
"0.4",
"0.4",
"0.4"
],
"z_hop_types": [
"Auto Lift",
"Auto Lift",
"Auto Lift",
"Auto Lift"
],
"enable_filament_ramming": "0",
"extruder_clearance_height_to_rod": "27.5",
"extruder_clearance_radius": "72.5",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME",
"z_hop_when_prime": [
"0",
"0",
"0",
"0"
],
"ramming_pressure_advance_value": "0.02",
"tool_change_temprature_wait": "0",
"printer_notes": "1、修改幅面坐标，原点坐标\n2、修改换头时间，5S",
"machine_pause_gcode": "M600"
}

15
resources/profiles/Snapmaker/machine/Snapmaker U1.json Normal file
View File

@@ -0,0 +1,15 @@
{
"type": "machine_model",
"machine_tech": "FFF",
"family": "Snapmaker",
"name": "Snapmaker U1",
"url": "",
"model_id": "797581801",
"bed_model": "Snapmaker U1_bed.stl",
"bed_texture": "Snapmaker U1_texture.svg",
"nozzle_diameter": "0.4"
}

189
resources/profiles/Snapmaker/machine/fdm_U1.json Normal file
View File

@@ -0,0 +1,189 @@
{
"type": "machine",
"name": "fdm_U1",
"from": "system",
"instantiation": "false",
"inherits": "fdm_toolchanger",
"gcode_flavor": "klipper",
"single_extruder_multi_material": "0",
"bed_model": "Snapmaker U1_bed.stl",
"bed_texture": "Snapmaker U1_bed.svg",
"max_layer_height": [
"0.32",
"0.32",
"0.32",
"0.32",
"0.32"
],
"min_layer_height": [
"0.08",
"0.08",
"0.08",
"0.08",
"0.08"
],
"deretraction_speed": [
"30",
"30",
"30",
"30",
"30"
],
"extruder_colour": [
"#FCE94F",
"#FCE94F",
"#FCE94F",
"#FCE94F",
"#FCE94F"
],
"extruder_offset": [
"0x0",
"0x0",
"0x0",
"0x0",
"0x0"
],
"long_retractions_when_cut": [
"0",
"0",
"0",
"0",
"0"
],
"nozzle_diameter": [
"0.4",
"0.4",
"0.4",
"0.4",
"0.4"
],
"retract_before_wipe": [
"70%",
"70%",
"70%",
"70%",
"70%"
],
"retract_length_toolchange": [
"2",
"2",
"2",
"2",
"2"
],
"retract_lift_above": [
"0",
"0",
"0",
"0",
"0"
],
"retract_lift_below": [
"0",
"0",
"0",
"0",
"0"
],
"retract_lift_enforce": [
"All Surfaces",
"All Surfaces",
"All Surfaces",
"All Surfaces",
"All Surfaces"
],
"retract_restart_extra": [
"0",
"0",
"0",
"0",
"0"
],
"retract_restart_extra_toolchange": [
"0",
"0",
"0",
"0",
"0"
],
"retract_when_changing_layer": [
"1",
"1",
"1",
"1",
"1"
],
"retraction_distances_when_cut": [
"18",
"18",
"18",
"18",
"18"
],
"retraction_length": [
"0.8",
"0.8",
"0.8",
"0.8",
"0.8"
],
"retraction_minimum_travel": [
"1",
"1",
"1",
"1",
"1"
],
"retraction_speed": [
"30",
"30",
"30",
"30",
"30"
],
"travel_slope": [
"3",
"3",
"3",
"3",
"3"
],
"version": "2.1.1.1",
"wipe": [
"1",
"1",
"1",
"1",
"1"
],
"wipe_distance": [
"1",
"1",
"1",
"1",
"1"
],
"z_hop": [
"0.4",
"0.4",
"0.4",
"0.4",
"0.4"
],
"z_hop_types": [
"Normal Lift",
"Normal Lift",
"Normal Lift",
"Normal Lift",
"Normal Lift"
],
"bed_mesh_max": "267,267",
"bed_mesh_min": "3,3",
"purge_in_prime_tower": "0",
"machine_pause_gcode": "M601",
"change_filament_gcode": "",
"machine_start_gcode": ";===== machine: PR2 ========================\n;===== date: 20250717 =====================\nPRINT_START\n;===== 预热热床和第一个挤出头 =================\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\n\n;===== 粗回零 =================\nG28 X Y\nT{initial_extruder}\nM109 T{initial_extruder} S140\nG28 Z\nG90\nG0 Z10 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG4 P2000\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 自动进料 ======================\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\n\n;===== 挤出流量 ======================\n{if (is_extruder_used[0])}\nSM_PRINT_FLOW_CALIBRATE INDEX=0 TARGET_TEMP={nozzle_temperature[0]}\n{endif}\n{if (is_extruder_used[1])}\nSM_PRINT_FLOW_CALIBRATE INDEX=1 TARGET_TEMP={nozzle_temperature[1]}\n{endif}\n{if (is_extruder_used[2])}\nSM_PRINT_FLOW_CALIBRATE INDEX=2 TARGET_TEMP={nozzle_temperature[2]}\n{endif}\n{if (is_extruder_used[3])}\nSM_PRINT_FLOW_CALIBRATE INDEX=3 TARGET_TEMP={nozzle_temperature[3]}\n{endif}\n\n;===== 取出第一个挤出头 =================\nT{initial_extruder}\nSET_VELOCITY_LIMIT ACCEL=10000\nM204 S10000\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z10 F10000\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nG0 Z5 F10000\nFINELY_CLEAN_NOZZLE_STAGE_1\nG0 Z5 F10000\nROUGHLY_CLEAN_NOZZLE\nG0 Z5 F10000\nFINELY_CLEAN_NOZZLE_STAGE_2\nM83\n\n;===== 第一个挤出头降温 =================\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM106 S0\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nINNER_CUTOFF_BASE_DISCARD\nINNER_ROUGHLY_CLEAN_NOZZLE_BASE_DISCARD\nINNER_ROUGHLY_CLEAN_NOZZLE_BASE_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 精回零 =================\nG28 Z\n;===== 热床调平 =================\n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n\n;BED_MESH_CALIBRATE PROBE_COUNT=7,7\n\n\n;======== 预挤出/划线 ================\n{if (is_extruder_used[0]) and 0 != initial_extruder}\nSM_PRINT_START_LINE INDEX=0 TARGET_TEMP={nozzle_temperature_initial_layer[0]}\nM83\nM104 S{nozzle_temperature[0] - 90}\n{endif}\n\n{if (is_extruder_used[1]) and 1 != initial_extruder}\nSM_PRINT_START_LINE INDEX=1 TARGET_TEMP={nozzle_temperature_initial_layer[1]}\nM83\nM104 S{nozzle_temperature[1] - 90}\n{endif}\n\n{if (is_extruder_used[2]) and 2 != initial_extruder}\nSM_PRINT_START_LINE INDEX=2 TARGET_TEMP={nozzle_temperature_initial_layer[2]}\nM83\nM104 S{nozzle_temperature[2] - 90}\n{endif}\n\n{if (is_extruder_used[3]) and 3 != initial_extruder}\nSM_PRINT_START_LINE INDEX=3 TARGET_TEMP={nozzle_temperature_initial_layer[3]}\nM83\nM104 S{nozzle_temperature[3] - 90}\n{endif}\n\n{if (is_extruder_used[initial_extruder])}\nSM_PRINT_START_LINE INDEX={initial_extruder} TARGET_TEMP={nozzle_temperature_initial_layer[initial_extruder]}\n{endif}\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} T{initial_extruder}\nM106 S0\n\nTIMELAPSE_START",
"scan_first_layer": "0",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0"
}

119
resources/profiles/Snapmaker/machine/fdm_klipper.json Normal file
View File

@@ -0,0 +1,119 @@
{
"type": "machine",
"name": "fdm_klipper",
"from": "system",
"instantiation": "false",
"printer_technology": "FFF",
"deretraction_speed": [
"40"
],
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin",
"silent_mode": "0",
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"10000"
],
"machine_max_acceleration_retracting": [
"1000"
],
"machine_max_acceleration_x": [
"10000"
],
"machine_max_acceleration_y": [
"10000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_speed_e": [
"60"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_z": [
"10"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"8"
],
"machine_max_jerk_y": [
"8"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"1"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"wipe": [
"1"
],
"default_print_profile": "",
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"machine_pause_gcode": "M601"
}

63
resources/profiles/Snapmaker/machine/fdm_toolchanger.json Normal file
View File

@@ -0,0 +1,63 @@
{
"type": "machine",
"name": "fdm_toolchanger",
"from": "system",
"instantiation": "false",
"inherits": "fdm_klipper",
"gcode_flavor": "klipper",
"machine_max_acceleration_e": ["5000", "5000"],
"machine_max_acceleration_extruding": ["20000", "20000"],
"machine_max_acceleration_retracting": ["5000", "5000"],
"machine_max_acceleration_travel": ["20000", "20000"],
"machine_max_acceleration_x": ["20000", "20000"],
"machine_max_acceleration_y": ["20000", "20000"],
"machine_max_acceleration_z": ["500", "200"],
"machine_max_speed_e": ["25", "25"],
"machine_max_speed_x": ["500", "200"],
"machine_max_speed_y": ["500", "200"],
"machine_max_speed_z": ["12", "12"],
"machine_max_jerk_e": ["2.5", "2.5"],
"machine_max_jerk_x": ["9", "9"],
"machine_max_jerk_y": ["9", "9"],
"machine_max_jerk_z": ["0.2", "0.4"],
"machine_min_extruding_rate": ["0", "0"],
"machine_min_travel_rate": ["0", "0"],
"max_layer_height": ["0.32"],
"min_layer_height": ["0.08"],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": ["1"],
"retract_before_wipe": ["70%"],
"retract_when_changing_layer": ["1"],
"retraction_length": ["0.8"],
"retract_length_toolchange": ["2"],
"z_hop": ["0.4"],
"retract_restart_extra": ["0"],
"retract_restart_extra_toolchange": ["0"],
"retraction_speed": ["30"],
"deretraction_speed": ["30"],
"z_hop_types": "Normal Lift",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"wipe": ["1"],
"default_filament_profile": [
"Snapmaker PLA"
],
"default_print_profile": "0.20mm Standard @Snapmaker",
"bed_exclude_area": ["0x0"],
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
"machine_end_gcode": "PRINT_END",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"machine_pause_gcode": "PAUSE",
"scan_first_layer": "0",
"nozzle_type": "undefine",
"auxiliary_fan": "0"
}