mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-08-05 09:07:39 +00:00
Add filament_retract_length_toolchange/filament_retract_restart_extra_toolchange config and update tool changer printer's profiles (#15039)
* update snapmaker profiles. largely ported for Snapmaker Orca fork * update prime volume * set precise_outer_wall to 1 * Update per-material multi-tool ramming to the filament library * Add per-filament overrides for toolchange retraction * Set toolchange retraction per filament for Snapmaker U1 * set default support type to tree * format snapmaker profiles
This commit is contained in:
SoftFever
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Polymaker General PLA Family @U1",
|
||||
"inherits": "Polymaker PLA @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "thXfSaUkOAKJ50ey",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Polymaker"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"62"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Polymaker PLA @U1 base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFL99",
|
||||
"instantiation": "false",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Polymaker Silk PLA Family @U1",
|
||||
"inherits": "Polymaker PLA @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "h8vIYpXbxFtHPV6e",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.34"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Polymaker"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Polymaker Tough PLA Family @U1",
|
||||
"inherits": "Polymaker PLA @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "d6CC81Es2hp46bto",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Polymaker"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -11,7 +11,6 @@
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
]
|
||||
|
||||
@@ -17,7 +17,6 @@
|
||||
"filament_z_hop": [
|
||||
"0.0"
|
||||
],
|
||||
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
|
||||
@@ -17,7 +17,6 @@
|
||||
"filament_z_hop": [
|
||||
"0.0"
|
||||
],
|
||||
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
|
||||
@@ -17,7 +17,6 @@
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
]
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"name": "PolyLite Dual PLA @0.2 nozzle",
|
||||
"setting_id": "jhmy4YHi9MuL0DWu",
|
||||
"inherits": "PolyLite PLA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "jhmy4YHi9MuL0DWu",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker A250 Dual (0.2 nozzle)",
|
||||
"Snapmaker A250 Dual BKit (0.2 nozzle)",
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"name": "PolyLite J1 PLA @0.2 nozzle",
|
||||
"setting_id": "jFlRSxx0KvN3BOUu",
|
||||
"inherits": "PolyLite PLA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "jFlRSxx0KvN3BOUu",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker J1 (0.2 nozzle)"
|
||||
]
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"name": "PolyLite J1 PLA",
|
||||
"setting_id": "wcpOTTMyZNPFKyXr",
|
||||
"inherits": "PolyLite PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "wcpOTTMyZNPFKyXr",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker J1 (0.4 nozzle)",
|
||||
"Snapmaker J1 (0.6 nozzle)",
|
||||
|
||||
@@ -1,4 +1,9 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "PolyLite PETG @Base",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
@@ -18,11 +23,6 @@
|
||||
"0"
|
||||
],
|
||||
"description": "",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"name": "PolyLite PETG @Base",
|
||||
"type": "filament",
|
||||
"instantiation": "false",
|
||||
"from": "system",
|
||||
"filament_vendor": [
|
||||
"Polymaker"
|
||||
]
|
||||
|
||||
@@ -17,7 +17,6 @@
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
]
|
||||
|
||||
@@ -17,7 +17,6 @@
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
]
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"name": "PolyLite PLA @0.2 nozzle",
|
||||
"setting_id": "s9mdMaFca8SHfji9",
|
||||
"inherits": "PolyLite PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "s9mdMaFca8SHfji9",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker A250 (0.2 nozzle)",
|
||||
"Snapmaker A250 BKit (0.2 nozzle)",
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"name": "PolyLite PLA @base",
|
||||
"filament_id": "1393866034",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "1393866034",
|
||||
"instantiation": "false",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"name": "PolyTerra Dual PLA @0.2 nozzle",
|
||||
"setting_id": "UQYgjH1uVxf3d2Nv",
|
||||
"inherits": "PolyTerra PLA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "UQYgjH1uVxf3d2Nv",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker A250 Dual (0.2 nozzle)",
|
||||
"Snapmaker A250 Dual BKit (0.2 nozzle)",
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"name": "PolyTerra J1 PLA @0.2 nozzle",
|
||||
"setting_id": "mxKHxGmBZzPLS82O",
|
||||
"inherits": "PolyTerra PLA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "mxKHxGmBZzPLS82O",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker J1 (0.2 nozzle)"
|
||||
]
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"name": "PolyTerra J1 PLA",
|
||||
"setting_id": "4MZWZX7QPBzxdEGj",
|
||||
"inherits": "PolyTerra PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "4MZWZX7QPBzxdEGj",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker J1 (0.4 nozzle)",
|
||||
"Snapmaker J1 (0.6 nozzle)",
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"name": "PolyTerra PLA @0.2 nozzle",
|
||||
"setting_id": "6W1ygT08NordBdIW",
|
||||
"inherits": "PolyTerra PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "6W1ygT08NordBdIW",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker A250 (0.2 nozzle)",
|
||||
"Snapmaker A250 BKit (0.2 nozzle)",
|
||||
|
||||
@@ -1,4 +1,9 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Polymaker HT-PLA @Base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_density": [
|
||||
"1.28"
|
||||
],
|
||||
@@ -18,11 +23,6 @@
|
||||
"0"
|
||||
],
|
||||
"description": "",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"name": "Polymaker HT-PLA @Base",
|
||||
"type": "filament",
|
||||
"instantiation": "false",
|
||||
"from": "system",
|
||||
"filament_vendor": [
|
||||
"Polymaker"
|
||||
]
|
||||
|
||||
@@ -1,4 +1,9 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Polymaker HT-PLA-GF @Base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_density": [
|
||||
"1.34"
|
||||
],
|
||||
@@ -18,11 +23,6 @@
|
||||
"0"
|
||||
],
|
||||
"description": "",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"name": "Polymaker HT-PLA-GF @Base",
|
||||
"type": "filament",
|
||||
"instantiation": "false",
|
||||
"from": "system",
|
||||
"filament_vendor": [
|
||||
"Polymaker"
|
||||
]
|
||||
|
||||
@@ -1,4 +1,9 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Polymaker PETG @Base",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
@@ -18,11 +23,6 @@
|
||||
"0"
|
||||
],
|
||||
"description": "",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"name": "Polymaker PETG @Base",
|
||||
"type": "filament",
|
||||
"instantiation": "false",
|
||||
"from": "system",
|
||||
"filament_vendor": [
|
||||
"Polymaker"
|
||||
]
|
||||
|
||||
@@ -1,4 +1,9 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Polymaker PLA Pro @Base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
@@ -18,11 +23,6 @@
|
||||
"0"
|
||||
],
|
||||
"description": "",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"name": "Polymaker PLA Pro @Base",
|
||||
"type": "filament",
|
||||
"instantiation": "false",
|
||||
"from": "system",
|
||||
"filament_vendor": [
|
||||
"Polymaker"
|
||||
]
|
||||
|
||||
@@ -7,5 +7,8 @@
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -7,5 +7,8 @@
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
|
||||
"inherits": "Snapmaker Breakaway Support @base",
|
||||
"from": "system",
|
||||
"setting_id": "mJoaud6wulT4p8SA",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"69.98"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.2"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
|
||||
"inherits": "Snapmaker Breakaway Support @base",
|
||||
"from": "system",
|
||||
"setting_id": "rKUUREJNhstIU0I2",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"69.98"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,98 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
|
||||
"inherits": "Snapmaker Breakaway Support @base",
|
||||
"from": "system",
|
||||
"setting_id": "hQ8jQ5GKQKGKuPew",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_cost": [
|
||||
"69.98"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.015"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -10,5 +10,83 @@
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PETG HF @U1 0.2 nozzle",
|
||||
"inherits": "Snapmaker PETG HF @U1 base2",
|
||||
"from": "system",
|
||||
"setting_id": "Ujul2YTBwfldFiFd",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_ec": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retraction_distances_when_ec": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"\n\n"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"3"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,113 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PETG HF @U1 0.6 nozzle",
|
||||
"inherits": "Snapmaker PETG HF @U1 base2",
|
||||
"from": "system",
|
||||
"setting_id": "2FfQZdp5xunngnF0",
|
||||
"instantiation": "true",
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_ec": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retraction_distances_when_ec": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"\n"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,110 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PETG HF @U1 0.8 nozzle",
|
||||
"inherits": "Snapmaker PETG HF @U1 base2",
|
||||
"from": "system",
|
||||
"setting_id": "ebANa67V4B2nwUaX",
|
||||
"instantiation": "true",
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_ec": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retraction_distances_when_ec": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,279 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PETG HF @U1 base2",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"filament_id": "GFG96",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.28"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"25"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cooling_before_tower": [
|
||||
"0"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"0"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"8.0"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"45.0"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"35.0"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"90.0"
|
||||
],
|
||||
"filament_dev_chamber_drying_time": [
|
||||
"12.0"
|
||||
],
|
||||
"filament_flush_temp": [
|
||||
"0"
|
||||
],
|
||||
"filament_flush_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_long_retractions_when_ec": [
|
||||
"nil"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1"
|
||||
],
|
||||
"filament_ramming_volumetric_speed_nc": [
|
||||
"-1"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_printable": [
|
||||
"3"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_ec": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_prime_volume_nc": [
|
||||
"60"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0"
|
||||
],
|
||||
"filament_pre_cooling_temperature_nc": [
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_travel_time_nc": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_length_nc": [
|
||||
"14"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"long_retractions_when_ec": [
|
||||
"0"
|
||||
],
|
||||
"retraction_distances_when_ec": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"no_slow_down_for_cooling_on_outwalls": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_velocity_adaptation_factor": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n\n"
|
||||
],
|
||||
"filament_adaptive_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"volumetric_speed_coefficients": [
|
||||
"0 0 0 0 0 0"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,110 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
|
||||
"inherits": "Snapmaker PETG Translucent @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "UTpedqYJysaoe3OI",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"20"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.23"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,98 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PETG Translucent @U1 0.4 nozzle",
|
||||
"inherits": "Snapmaker PETG Translucent @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "k6UQJJASzFSfePqN",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PETG Translucent @U1 0.6 nozzle",
|
||||
"inherits": "Snapmaker PETG Translucent @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "FlcbnP3kWiJLMDMl",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PETG Translucent @U1 0.8 nozzle",
|
||||
"inherits": "Snapmaker PETG Translucent @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "aJk3TnFTU3uQGjd3",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"30"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PETG Translucent @U1 base",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"filament_id": "PETG_TRANSLUCENT_001",
|
||||
"instantiation": "false"
|
||||
}
|
||||
@@ -0,0 +1,127 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Basic @U1 base",
|
||||
"from": "system",
|
||||
"filament_id": "1417031127011",
|
||||
"instantiation": "false",
|
||||
"filament_end_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"35"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"35"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_load_time": [
|
||||
"2"
|
||||
],
|
||||
"filament_unload_time": [
|
||||
"2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,284 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Basic @U1",
|
||||
"inherits": "Snapmaker PLA Basic @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "ZtUJN4JpkR0MLpiY",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"25"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,284 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
|
||||
"inherits": "Snapmaker PLA Basic @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "iybaFWrXKOsmXgMJ",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"25"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,95 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Glow @U1 0.4 nozzle",
|
||||
"inherits": "Snapmaker PLA Glow @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "ee1YNNr8CwKetuvY",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"30"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,44 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Glow @U1 base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "SPGLOW001",
|
||||
"instantiation": "false",
|
||||
"filament_end_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"35"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"35"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_load_time": [
|
||||
"2"
|
||||
],
|
||||
"filament_unload_time": [
|
||||
"2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,287 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Matte @U1 0.2 nozzle",
|
||||
"inherits": "Snapmaker PLA Matte @U1 base2",
|
||||
"from": "system",
|
||||
"setting_id": "d3c48DeNk7VDeeHf",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
" "
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
" "
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"4"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"4"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.025"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,287 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Matte @U1 0.6 nozzle",
|
||||
"inherits": "Snapmaker PLA Matte @U1 base2",
|
||||
"from": "system",
|
||||
"setting_id": "l3E1WaljDn2uoTqW",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
" "
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
" "
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.015"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,287 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Matte @U1 0.8 nozzle",
|
||||
"inherits": "Snapmaker PLA Matte @U1 base2",
|
||||
"from": "system",
|
||||
"setting_id": "NLPd4AA0seW3NXdy",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
" "
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
" "
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.015"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,127 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Matte @U1 base2",
|
||||
"from": "system",
|
||||
"filament_id": "141703112701",
|
||||
"instantiation": "false",
|
||||
"filament_end_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"35"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"35"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_load_time": [
|
||||
"2"
|
||||
],
|
||||
"filament_unload_time": [
|
||||
"2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -27,7 +27,7 @@
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
"80"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
@@ -47,9 +47,6 @@
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
@@ -60,7 +57,7 @@
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
@@ -102,7 +99,7 @@
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.01"
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
@@ -117,7 +114,7 @@
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
"22"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
@@ -140,6 +137,9 @@
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
@@ -216,19 +216,19 @@
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
"65"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
@@ -276,9 +276,9 @@
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
"65"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -46,8 +46,5 @@
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,285 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Silk @U1 0.2 nozzle",
|
||||
"inherits": "Snapmaker PLA Basic @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "Q5xH6oGGlbXr14Pa",
|
||||
"filament_id": "11813638720",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"3"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"18"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"1"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.015"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,285 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Silk @U1 0.6 nozzle",
|
||||
"inherits": "Snapmaker PLA Basic @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "2pieDQoz9PiDCnU1",
|
||||
"filament_id": "11813638720",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.015"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,285 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Silk @U1 0.8 nozzle",
|
||||
"inherits": "Snapmaker PLA Basic @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "f3H0JFUnds0mkKCN",
|
||||
"filament_id": "11813638720",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.015"
|
||||
]
|
||||
}
|
||||
@@ -55,8 +55,5 @@
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,285 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Silk @U1",
|
||||
"inherits": "Snapmaker PLA Silk @U1 base",
|
||||
"inherits": "Snapmaker PLA Basic @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "9PkHSwtXFM0zPWth",
|
||||
"filament_id": "11813638720",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"25"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"1"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.015"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,50 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
|
||||
"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
|
||||
"from": "system",
|
||||
"setting_id": "jsAgNNiUC6DoO7rz",
|
||||
"instantiation": "true",
|
||||
"filament_deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.01"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"30"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.2"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,41 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
|
||||
"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
|
||||
"from": "system",
|
||||
"setting_id": "aKudBpQBj3MZZZav",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"30"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.6"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,41 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
|
||||
"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
|
||||
"from": "system",
|
||||
"setting_id": "sWoInox4hzxzIHfe",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"30"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.6"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.018"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,281 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA SnapSpeed @U1 base2",
|
||||
"from": "system",
|
||||
"filament_id": "141703112701",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
" "
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
" "
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"45"
|
||||
]
|
||||
}
|
||||
@@ -33,13 +33,13 @@
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
@@ -47,20 +47,17 @@
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
@@ -102,7 +99,7 @@
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
"0.966"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
@@ -117,7 +114,7 @@
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
"20"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
@@ -126,7 +123,7 @@
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
"30"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
@@ -140,6 +137,9 @@
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
@@ -159,13 +159,13 @@
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
@@ -207,19 +207,19 @@
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
"65"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
@@ -231,7 +231,7 @@
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
@@ -246,7 +246,7 @@
|
||||
"0.4157"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.026"
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
@@ -267,7 +267,7 @@
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
@@ -276,9 +276,9 @@
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
"65"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,284 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Translucent @U1 0.2 nozzle",
|
||||
"inherits": "Snapmaker PLA Translucent @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "zIg9XLrieYNBduyn",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1.6"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.15"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,284 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Translucent @U1 0.4 nozzle",
|
||||
"inherits": "Snapmaker PLA Translucent @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "RqtrcLcy124ICGEc",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"50"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,284 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Translucent @U1 0.6 nozzle",
|
||||
"inherits": "Snapmaker PLA Translucent @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "OZHemzEcvzFMN8fL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,284 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
|
||||
"inherits": "Snapmaker PLA Translucent @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "IPehCg9fKawLorB5",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,44 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Translucent @U1 base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "SPTR001",
|
||||
"instantiation": "false",
|
||||
"filament_end_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"35"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"35"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_load_time": [
|
||||
"2"
|
||||
],
|
||||
"filament_unload_time": [
|
||||
"2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Wood @U1 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "XvizDDHbds3bVrzi",
|
||||
"filament_id": "GFL9922",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"\n"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.025"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,114 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Wood @U1 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "Kp77DCcitdmoyjqm",
|
||||
"filament_id": "GFL9922",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"\n"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.014"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,114 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA Wood @U1 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "nBYnNiqwLo6nAsqi",
|
||||
"filament_id": "GFL9922",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"\n"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.965"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.007"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,132 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA-CF @U1 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "2INwruC3ZVkBTdUT",
|
||||
"filament_id": "GFL98111",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"50"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,138 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA-CF @U1 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "CKfdL85SvbOLzMuP",
|
||||
"filament_id": "GFL98111",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.015"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,135 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PLA-CF @U1 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "fhhnfJm4dN9FXpWQ",
|
||||
"filament_id": "GFL98111",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
""
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"3"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.015"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -59,9 +59,6 @@
|
||||
"temperature_vitrification": [
|
||||
"150"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
|
||||
@@ -7,5 +7,8 @@
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,113 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PVA @U1 0.6 nozzle",
|
||||
"inherits": "Snapmaker PVA @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "lIqgnfeZdAm8G0TH",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_cost": [
|
||||
"79.98"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker PVA @U1 0.8 nozzle",
|
||||
"inherits": "Snapmaker PVA @U1 base",
|
||||
"from": "system",
|
||||
"setting_id": "WxtuvwWxy73Gi0IK",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"79.98"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"1"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"205"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
@@ -7,5 +7,95 @@
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,150 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker TPU 90A @U1 0.6 nozzle",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "uQCplebxmpBpzsnk",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n\n"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0.1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.093"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"14"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"0"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,144 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker TPU 90A @U1 0.8 nozzle",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "w4Hpl2qNPmgNvaeM",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n\n"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0.1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.095"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"4"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"14"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
]
|
||||
}
|
||||
141
resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json
Normal file
141
resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json
Normal file
@@ -0,0 +1,141 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker TPU 90A @U1",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "T4MmgICRrSzvmCZ5",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n\n"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0.1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.045"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"5"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"14"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
]
|
||||
}
|
||||
@@ -43,9 +43,6 @@
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
|
||||
@@ -0,0 +1,147 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker TPU 95A HF @U1 0.6 nozzle",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "Q2svXpkEqg0dCdq3",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n\n"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0.1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.067"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.14"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,147 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker TPU 95A HF @U1 0.8 nozzle",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "RjsE08h3l37cAkAs",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n\n"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0.1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.045"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,144 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Snapmaker TPU 95A HF @U1",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "KwcwmV2UmZUgCBoz",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n\n"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0.1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.067"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"10"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"6"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Snapmaker"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.23"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
]
|
||||
}
|
||||
@@ -1,13 +1,54 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "CwJeuh1rxZcjvkXh",
|
||||
"name": "Snapmaker U1 (0.2 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_U1",
|
||||
"from": "system",
|
||||
"setting_id": "CwJeuh1rxZcjvkXh",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Snapmaker U1",
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"auxiliary_fan": "1",
|
||||
"change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
|
||||
"deretraction_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"host_type": "octoprint",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n",
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
|
||||
"machine_tool_change_time": "5",
|
||||
"max_layer_height": [
|
||||
"0.14",
|
||||
"0.14",
|
||||
@@ -26,5 +67,126 @@
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"nozzle_type": "hardened_steel"
|
||||
"nozzle_type": "hardened_steel",
|
||||
"printable_area": [
|
||||
"0.5x1",
|
||||
"270.5x1",
|
||||
"270.5x271",
|
||||
"0.5x271"
|
||||
],
|
||||
"printable_height": "270.05",
|
||||
"retract_before_wipe": [
|
||||
"0%",
|
||||
"0%",
|
||||
"0%",
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"269",
|
||||
"269",
|
||||
"269",
|
||||
"269"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"thumbnails": "48x48/PNG, 300x300/PNG",
|
||||
"travel_slope": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2",
|
||||
"2",
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift",
|
||||
"Auto Lift",
|
||||
"Auto Lift",
|
||||
"Auto Lift"
|
||||
],
|
||||
"enable_filament_ramming": "0",
|
||||
"extruder_clearance_height_to_rod": "27.5",
|
||||
"extruder_clearance_radius": "72.5",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
|
||||
"machine_pause_gcode": "M600",
|
||||
"nozzle_volume": "143",
|
||||
"support_multi_bed_types": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
|
||||
"default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)"
|
||||
}
|
||||
|
||||
@@ -1,14 +1,20 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "UeTP4RqAd7xAMHVE",
|
||||
"name": "Snapmaker U1 (0.4 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_U1",
|
||||
"from": "system",
|
||||
"setting_id": "UeTP4RqAd7xAMHVE",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Snapmaker U1",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
|
||||
"deretraction_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
@@ -29,38 +35,6 @@
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"25000",
|
||||
"25000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"25000",
|
||||
"25000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"25000",
|
||||
"25000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"25000",
|
||||
"25000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
@@ -69,22 +43,11 @@
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"1000",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"1000",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"resonance_avoidance": "1",
|
||||
"min_resonance_avoidance_speed": "40",
|
||||
"max_resonance_avoidance_speed": "90",
|
||||
"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20251222 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count}\nSET_PRINT_STATS_INFO CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\nG28 X Y\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nG28 Z\n\n;===== 热床调平 =================\n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n; Original upstream: BED_MESH_CALIBRATE PROBE_COUNT=11,11\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X10 Y3 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X110 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
|
||||
"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
|
||||
"machine_tool_change_time": "5",
|
||||
"max_layer_height": [
|
||||
"0.32",
|
||||
@@ -104,7 +67,7 @@
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_type": "stainless_steel",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"printable_area": [
|
||||
"0.5x1",
|
||||
"270.5x1",
|
||||
@@ -112,7 +75,6 @@
|
||||
"0.5x271"
|
||||
],
|
||||
"printable_height": "270.05",
|
||||
"printer_settings_id": "MyToolChanger 0.4 nozzle - Copy",
|
||||
"retract_before_wipe": [
|
||||
"0%",
|
||||
"0%",
|
||||
@@ -168,10 +130,10 @@
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8"
|
||||
"1.5",
|
||||
"1.5",
|
||||
"1.5",
|
||||
"1.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1",
|
||||
@@ -180,16 +142,10 @@
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"35",
|
||||
"35",
|
||||
"35",
|
||||
"35"
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"thumbnails": "48x48/PNG, 300x300/PNG",
|
||||
"travel_slope": [
|
||||
@@ -228,17 +184,12 @@
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
|
||||
"z_hop_when_prime": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"ramming_pressure_advance_value": "0.02",
|
||||
"tool_change_temprature_wait": "0",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
|
||||
"machine_pause_gcode": "M600",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count}\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num+1}",
|
||||
"nozzle_volume": "143"
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
|
||||
"nozzle_volume": "143",
|
||||
"resonance_avoidance": "1",
|
||||
"min_resonance_avoidance_speed": "40",
|
||||
"max_resonance_avoidance_speed": "90"
|
||||
}
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "O6AMxX1Ptbtv4zCK",
|
||||
"name": "Snapmaker U1 (0.4+0.6 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_U1",
|
||||
"from": "system",
|
||||
"setting_id": "O6AMxX1Ptbtv4zCK",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Snapmaker U1",
|
||||
"printer_variant": "0.4+0.6",
|
||||
"default_print_profile": "0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle)",
|
||||
|
||||
@@ -1,18 +1,59 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "1OseO7RSPgE4CRKO",
|
||||
"name": "Snapmaker U1 (0.6 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_U1",
|
||||
"from": "system",
|
||||
"setting_id": "1OseO7RSPgE4CRKO",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Snapmaker U1",
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.20 Standard @Snapmaker U1 (0.6 nozzle)",
|
||||
"auxiliary_fan": "1",
|
||||
"change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
|
||||
"deretraction_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"host_type": "octoprint",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n",
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
|
||||
"machine_tool_change_time": "5",
|
||||
"max_layer_height": [
|
||||
"0.48",
|
||||
"0.48",
|
||||
"0.48",
|
||||
"0.48"
|
||||
"0.42",
|
||||
"0.42",
|
||||
"0.42",
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12",
|
||||
@@ -26,5 +67,126 @@
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"nozzle_type": "stainless_steel"
|
||||
"nozzle_type": "stainless_steel",
|
||||
"printable_area": [
|
||||
"0.5x1",
|
||||
"270.5x1",
|
||||
"270.5x271",
|
||||
"0.5x271"
|
||||
],
|
||||
"printable_height": "270.05",
|
||||
"retract_before_wipe": [
|
||||
"0%",
|
||||
"0%",
|
||||
"0%",
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"269",
|
||||
"269",
|
||||
"269",
|
||||
"269"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"thumbnails": "48x48/PNG, 300x300/PNG",
|
||||
"travel_slope": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift",
|
||||
"Auto Lift",
|
||||
"Auto Lift",
|
||||
"Auto Lift"
|
||||
],
|
||||
"enable_filament_ramming": "0",
|
||||
"extruder_clearance_height_to_rod": "27.5",
|
||||
"extruder_clearance_radius": "72.5",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
|
||||
"machine_pause_gcode": "M600",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
|
||||
"nozzle_volume": "143",
|
||||
"support_multi_bed_types": "0",
|
||||
"default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)"
|
||||
}
|
||||
|
||||
@@ -1,13 +1,54 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "WTkhQtyDO06YY6AG",
|
||||
"name": "Snapmaker U1 (0.8 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_U1",
|
||||
"from": "system",
|
||||
"setting_id": "WTkhQtyDO06YY6AG",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Snapmaker U1",
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
|
||||
"auxiliary_fan": "1",
|
||||
"change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
|
||||
"deretraction_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"host_type": "octoprint",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n",
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
|
||||
"machine_tool_change_time": "5",
|
||||
"max_layer_height": [
|
||||
"0.56",
|
||||
"0.56",
|
||||
@@ -26,5 +67,126 @@
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"nozzle_type": "hardened_steel"
|
||||
"nozzle_type": "hardened_steel",
|
||||
"printable_area": [
|
||||
"0.5x1",
|
||||
"270.5x1",
|
||||
"270.5x271",
|
||||
"0.5x271"
|
||||
],
|
||||
"printable_height": "270.05",
|
||||
"retract_before_wipe": [
|
||||
"0%",
|
||||
"0%",
|
||||
"0%",
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"269",
|
||||
"269",
|
||||
"269",
|
||||
"269"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.5",
|
||||
"1.5",
|
||||
"1.5",
|
||||
"1.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"thumbnails": "48x48/PNG, 300x300/PNG",
|
||||
"travel_slope": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2",
|
||||
"2",
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift",
|
||||
"Auto Lift",
|
||||
"Auto Lift",
|
||||
"Auto Lift"
|
||||
],
|
||||
"enable_filament_ramming": "0",
|
||||
"extruder_clearance_height_to_rod": "27.5",
|
||||
"extruder_clearance_radius": "72.5",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
|
||||
"machine_pause_gcode": "M600",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
|
||||
"nozzle_volume": "143",
|
||||
"support_multi_bed_types": "0",
|
||||
"default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)"
|
||||
}
|
||||
|
||||
@@ -176,8 +176,6 @@
|
||||
"Normal Lift",
|
||||
"Normal Lift"
|
||||
],
|
||||
"bed_mesh_max": "267,267",
|
||||
"bed_mesh_min": "3,3",
|
||||
"purge_in_prime_tower": "0",
|
||||
"machine_pause_gcode": "M601",
|
||||
"change_filament_gcode": "",
|
||||
@@ -186,12 +184,14 @@
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"printer_agent": "snapmaker",
|
||||
"printable_area": [
|
||||
"0.5x1",
|
||||
"270.5x1",
|
||||
"270.5x271",
|
||||
"0.5x271"
|
||||
],
|
||||
"printable_height": "270.05"
|
||||
"printable_height": "270.05",
|
||||
"bed_mesh_min": "3,3",
|
||||
"bed_mesh_max": "267,267",
|
||||
"printer_agent": "snapmaker"
|
||||
}
|
||||
|
||||
@@ -1,43 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.2_common",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.06",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.06",
|
||||
"support_bottom_z_distance": "0.06",
|
||||
"setting_id": "3SCofR6VrVyo3vJp",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "13.5",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
"type": "process",
|
||||
"name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "3SCofR6VrVyo3vJp",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "13.5",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
|
||||
@@ -1,39 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.2_common",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.06",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.06",
|
||||
"support_bottom_z_distance": "0.06",
|
||||
"setting_id": "997RaiNHd2YhpaRB",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "13.5",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
"type": "process",
|
||||
"name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "997RaiNHd2YhpaRB",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "13.5",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
|
||||
@@ -12,6 +12,19 @@
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "18",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150"
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_speed": "100",
|
||||
"precise_outer_wall": "1",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib",
|
||||
"gap_fill_target": "topbottom"
|
||||
}
|
||||
|
||||
@@ -1,43 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.2_common",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.08",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.08",
|
||||
"support_bottom_z_distance": "0.08",
|
||||
"setting_id": "6ExpMU3Wq4J1R7wy",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "18",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
"type": "process",
|
||||
"name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "6ExpMU3Wq4J1R7wy",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "18",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
|
||||
@@ -21,6 +21,18 @@
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "18",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150"
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"precise_outer_wall": "1",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib",
|
||||
"gap_fill_target": "topbottom"
|
||||
}
|
||||
|
||||
@@ -1,39 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.2_common",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.08",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.08",
|
||||
"support_bottom_z_distance": "0.08",
|
||||
"setting_id": "loFrCYH9ux2L5JpZ",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "18",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
"type": "process",
|
||||
"name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "loFrCYH9ux2L5JpZ",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "18",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
|
||||
@@ -1,43 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.2_common",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"setting_id": "BfLpmnJnSBYBFInR",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "28",
|
||||
"prime_volume": "25",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
"type": "process",
|
||||
"name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "BfLpmnJnSBYBFInR",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "28",
|
||||
"prime_volume": "25",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
|
||||
@@ -1,41 +1,29 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.2_common",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"setting_id": "SOq962UWv1ml1Mk0",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "0",
|
||||
"preheat_time": "31",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_tower_width": "28",
|
||||
"prime_volume": "25",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_threshold_angle": "35",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib",
|
||||
"slowdown_for_curled_perimeters": "0"
|
||||
"type": "process",
|
||||
"name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "SOq962UWv1ml1Mk0",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "1",
|
||||
"preheat_time": "31",
|
||||
"prime_tower_brim_width": "6",
|
||||
"prime_tower_width": "28",
|
||||
"prime_volume": "25",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_threshold_angle": "35",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib",
|
||||
"slowdown_for_curled_perimeters": "0"
|
||||
}
|
||||
|
||||
@@ -13,5 +13,18 @@
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150"
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "27",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"precise_outer_wall": "1",
|
||||
"support_threshold_angle": "25",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib",
|
||||
"gap_fill_target": "topbottom"
|
||||
}
|
||||
|
||||
@@ -20,5 +20,20 @@
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"slowdown_for_curled_perimeters": "0"
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "27",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "1",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_threshold_angle": "25",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib",
|
||||
"gap_fill_target": "topbottom"
|
||||
}
|
||||
|
||||
@@ -1,39 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.2_common",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.12",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_bottom_z_distance": "0.12",
|
||||
"setting_id": "KHC1zpxpuvaUEzvf",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "28",
|
||||
"prime_volume": "27",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
"type": "process",
|
||||
"name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "KHC1zpxpuvaUEzvf",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
],
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "28",
|
||||
"prime_volume": "27",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user