juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-16 18:12:10 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fix of [2.3.0-alpha4] Crash - several models cause crash when slicing #5208

Browse Source 
Fixed some issues in internal anchors of the Adaptive Cubic infill.
The ugly and dangerous implicit casting operators in Line, MultiPoint,
Polyline and Polygon were made explicit.
This commit is contained in:
Vojtech Bubnik
2020-11-24 16:00:46 +01:00
parent 10c41290fd
commit 62bdc192d8
25 changed files with 237 additions and 110 deletions
Download Patch File Download Diff File Expand all files Collapse all files

35
src/libslic3r/PrintConfig.cpp
View File

@@ -1064,11 +1064,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(1));
def = this->add("infill_anchor", coFloatOrPercent);
auto def_infill_anchor_min = def = this->add("infill_anchor", coFloatOrPercent);
def->label = L("Length of the infill anchor");
def->category = L("Advanced");
def->tooltip = L("Connect an infill line to an internal perimeter with a short segment of an additional perimeter. "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width.");
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. "
"PrusaSlicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side "
"and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. "
"Set this parameter to zero to disable anchoring perimeters connected to a single infill line.");
def->sidetext = L("mm or %");
def->ratio_over = "infill_extrusion_width";
def->gui_type = "f_enum_open";
@@ -1078,15 +1082,36 @@ void PrintConfigDef::init_fff_params()
def->enum_values.push_back("5");
def->enum_values.push_back("10");
def->enum_values.push_back("1000");
def->enum_labels.push_back(L("0 (not anchored)"));
def->enum_labels.push_back(L("0 (no open anchors)"));
def->enum_labels.push_back("1 mm");
def->enum_labels.push_back("2 mm");
def->enum_labels.push_back("5 mm");
def->enum_labels.push_back("10 mm");
def->enum_labels.push_back(L("1000 (unlimited)"));
def->mode = comAdvanced;
// def->set_default_value(new ConfigOptionFloatOrPercent(300, true));
def->set_default_value(new ConfigOptionFloatOrPercent(1000, false));
def->set_default_value(new ConfigOptionFloatOrPercent(600, true));
def = this->add("infill_anchor_max", coFloatOrPercent);
def->label = L("Maximum length of the infill anchor");
def->category = def_infill_anchor_min->category;
def->tooltip = L("Connect an infill line to an internal perimeter with a short segment of an additional perimeter. "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. "
"PrusaSlicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side "
"and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. "
"Set this parameter to zero to disable anchoring.");
def->sidetext = def_infill_anchor_min->sidetext;
def->ratio_over = def_infill_anchor_min->ratio_over;
def->gui_type = def_infill_anchor_min->gui_type;
def->enum_values = def_infill_anchor_min->enum_values;
def->enum_labels.push_back(L("0 (not anchored)"));
def->enum_labels.push_back("1 mm");
def->enum_labels.push_back("2 mm");
def->enum_labels.push_back("5 mm");
def->enum_labels.push_back("10 mm");
def->enum_labels.push_back(L("1000 (unlimited)"));
def->mode = def_infill_anchor_min->mode;
def->set_default_value(new ConfigOptionFloatOrPercent(50, false));
def = this->add("infill_extruder", coInt);
def->label = L("Infill extruder");