Wiki Update 11 - Strength (#10369)

* Create Patterns specific wiki

* Fix typos in installation instructions

Corrected the winget flag from --exact to -e and removed an extraneous backtick from the Mac xattr command in the README installation instructions.

* Improve README formatting and clarity

* Calibration Flow Ratio Yolo Archimedean cords

Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com>

* redirection/tab.cpp section

* Missing Frequent

* remove auto-cooling

* remove thumbnails

* seam pointers

* walls

* infill

* Image standarization

* Fix broken internal links

* Add reference note to Arachne wall generator docs

* OrcaSlicer std

* PrusaSlicer std

* 2d-lateral xlsx

* vertical patterns

* Redirections fix

* Update speed_settings_overhang_speed.md

* Fix to action

* FlowRate

Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com>

* Top Bottom Shells

* advanced strength

* Action fix

* Update How-to-wiki.md

* Home.md icons and reorganize sections

* Home Icons fix

* Update cornering-calib.md

* Update strength_settings_infill.md

* Update Auxiliary-fan.md

Co-Authored-By: Fisheye_3D <78997080+fisheye3d@users.noreply.github.com>

* Add warning about wiki maintenance status

doc/print_settings/speed/speed_settings_overhang_speed.md

@@ -2,7 +2,7 @@
 
 - [Slow down for overhang](#slow-down-for-overhang)
   - [Slow down for curled perimeters](#slow-down-for-curled-perimeters)
-  - [Overhang speed](#overhang-speed-1)
+  - [Speed](#speed)
 - [Bridge speed](#bridge-speed)
 
 ## Slow down for overhang
@@ -21,7 +21,7 @@ It is generally recommended to have this option switched on unless your printer
 > [!NOTE]
 > When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge. For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 100% overhang speed will be applied.
 
-### Overhang speed
+### Speed
 
 This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of [line width](quality_settings_line_width).