Wiki Update 11 - Strength (#10369)

* Create Patterns specific wiki

* Fix typos in installation instructions

Corrected the winget flag from --exact to -e and removed an extraneous backtick from the Mac xattr command in the README installation instructions.

* Improve README formatting and clarity

* Calibration Flow Ratio Yolo Archimedean cords

Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com>

* redirection/tab.cpp section

* Missing Frequent

* remove auto-cooling

* remove thumbnails

* seam pointers

* walls

* infill

* Image standarization

* Fix broken internal links

* Add reference note to Arachne wall generator docs

* OrcaSlicer std

* PrusaSlicer std

* 2d-lateral xlsx

* vertical patterns

* Redirections fix

* Update speed_settings_overhang_speed.md

* Fix to action

* FlowRate

Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com>

* Top Bottom Shells

* advanced strength

* Action fix

* Update How-to-wiki.md

* Home.md icons and reorganize sections

* Home Icons fix

* Update cornering-calib.md

* Update strength_settings_infill.md

* Update Auxiliary-fan.md

Co-Authored-By: Fisheye_3D <78997080+fisheye3d@users.noreply.github.com>

* Add warning about wiki maintenance status

doc/print_settings/speed/speed_settings_acceleration.md

@@ -23,11 +23,11 @@ The default acceleration of both normal printing and travel.
 
 ## Outer wall
 
-Acceleration for [outer wall](speed_settings_walls#outer-wall) printing. This is usually set to a lower value than normal printing to ensure better quality.
+Acceleration for [outer wall](speed_settings_other_layers_speed#outer-wall) printing. This is usually set to a lower value than normal printing to ensure better quality.
 
 ## Inner wall
 
-Acceleration for [inner wall](speed_settings_walls#inner-wall) printing. This is usually set to a higher value than outer wall printing to improve speed.
+Acceleration for [inner wall](speed_settings_other_layers_speed#inner-wall) printing. This is usually set to a higher value than outer wall printing to improve speed.
 
 ## Bridge
 

doc/print_settings/speed/speed_settings_advanced.md

@@ -184,7 +184,7 @@ In this case, the printer slows down and then accelerates independently of what
 
 ## Credits
 
-- **Original feature authors and creators:** The Prusa Slicer team, including [@bubnikv](https://github.com/bubnikv), [@hejllukas](https://github.com/hejllukas).
+- **Original feature authors and creators:** The PrusaSlicer team, including [@bubnikv](https://github.com/bubnikv), [@hejllukas](https://github.com/hejllukas).
 - **Enhanced by:** [@MGunlogson](https://github.com/MGunlogson), introducing the feature to external perimeters, enhancing it by taking into account travel, retraction and implementing near-contiguous extrusions pressure equalizer adjustments.
 - **Ported to Orca:** [@igiannakas](https://github.com/igiannakas).
 - **Enhanced by:** [@noisyfox](https://github.com/Noisyfox), per object pressure equalization and fixing calculation logic bugs.

doc/print_settings/speed/speed_settings_initial_layer_speed.md

@@ -4,12 +4,12 @@ Printing the first layer slower than the rest of the print is a widely recommend
 
 ## Initial layer
 
-This setting determines the printing speed for the first layer, excluding [solid infill](strength_settings_top_bottom_shells) regions.  It applies to the [outer/inner walls](strength_settings_walls), [sparse infill](strength_settings_infill) when [bottom layers](strength_settings_top_bottom_shells#shells-layers) is set to 0.  
+This setting determines the printing speed for the first layer, excluding [solid infill](strength_settings_top_bottom_shells) regions.  It applies to the [outer/inner walls](strength_settings_walls), [sparse infill](strength_settings_infill) when [bottom layers](strength_settings_top_bottom_shells#shell-layers) is set to 0.  
 Adjusting this speed helps ensure proper adhesion and print quality for the initial layer.
 
 ## Initial layer infill
 
-Defines the speed used specifically for [solid infill](strength_settings_top_bottom_shells#shells-layers) regions on the first layer. These areas require more precise and consistent extrusion to create a flat and stable surface for subsequent layers. Printing this section too fast may result in high internal stresses (increased risk of warping), poor layer uniformity, or adhesion failures.
+Defines the speed used specifically for [solid infill](strength_settings_top_bottom_shells#shell-layers) regions on the first layer. These areas require more precise and consistent extrusion to create a flat and stable surface for subsequent layers. Printing this section too fast may result in high internal stresses (increased risk of warping), poor layer uniformity, or adhesion failures.
 
 ## Initial layer travel speed
 

doc/print_settings/speed/speed_settings_other_layers_speed.md

@@ -7,8 +7,8 @@
 >
 > - [Maximum Volumetric Speed](volumetric-speed-calib)
 > - Machine / Motion ability
-> - [Acceleration](speed-settings-acceleration)
-> - [Jerk settings](speed-settings-jerk)
+> - [Acceleration](speed_settings_acceleration)
+> - [Jerk settings](speed_settings_jerk_xy)
 
 - [Speed limitations](#speed-limitations)
 - [Outer wall](#outer-wall)
@@ -62,8 +62,8 @@ For example, if the threshold is set to 5 mm, then the perimeter length must be
 
 ## Sparse infill
 
-Speed of [sparse infill](strength_settings_infill#sparse-infill) which is printed faster than solid infill to reduce print time.  
-In case you are using your Infill Pattern as aesthetic feature, you may want to set it closer to the [outer wall speed](#outer-wall) to get better quality.
+Speed of [sparse infill](strength_settings_infill) which is printed faster than solid infill to reduce print time.  
+In case you are using your [Infill Pattern](strength_settings_infill) as aesthetic feature, you may want to set it closer to the [outer wall speed](#outer-wall) to get better quality.
 
 ## Internal solid infill
 

doc/print_settings/speed/speed_settings_overhang_speed.md

@@ -2,7 +2,7 @@
 
 - [Slow down for overhang](#slow-down-for-overhang)
   - [Slow down for curled perimeters](#slow-down-for-curled-perimeters)
-  - [Overhang speed](#overhang-speed-1)
+  - [Speed](#speed)
 - [Bridge speed](#bridge-speed)
 
 ## Slow down for overhang
@@ -21,7 +21,7 @@ It is generally recommended to have this option switched on unless your printer
 > [!NOTE]
 > When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge. For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 100% overhang speed will be applied.
 
-### Overhang speed
+### Speed
 
 This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of [line width](quality_settings_line_width).