Wiki Update 11 - Strength (#10369)

* Create Patterns specific wiki

* Fix typos in installation instructions

Corrected the winget flag from --exact to -e and removed an extraneous backtick from the Mac xattr command in the README installation instructions.

* Improve README formatting and clarity

* Calibration Flow Ratio Yolo Archimedean cords

Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com>

* redirection/tab.cpp section

* Missing Frequent

* remove auto-cooling

* remove thumbnails

* seam pointers

* walls

* infill

* Image standarization

* Fix broken internal links

* Add reference note to Arachne wall generator docs

* OrcaSlicer std

* PrusaSlicer std

* 2d-lateral xlsx

* vertical patterns

* Redirections fix

* Update speed_settings_overhang_speed.md

* Fix to action

* FlowRate

Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com>

* Top Bottom Shells

* advanced strength

* Action fix

* Update How-to-wiki.md

* Home.md icons and reorganize sections

* Home Icons fix

* Update cornering-calib.md

* Update strength_settings_infill.md

* Update Auxiliary-fan.md

Co-Authored-By: Fisheye_3D <78997080+fisheye3d@users.noreply.github.com>

* Add warning about wiki maintenance status

doc/print_settings/quality/quality_settings_wall_generator.md

@@ -26,6 +26,9 @@ The Arachne wall generator dynamically adjusts extrusion width to follow the sha
 
 ![wallgenerator-arachne](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/WallGenerator/wallgenerator-arachne.png?raw=true)
 
+> [!NOTE]
+> [A Framework for Adaptive Width Control of Dense Contour-Parallel Toolpaths in Fused Deposition Modeling](https://www.sciencedirect.com/science/article/pii/S0010448520301007?via%3Dihub)
+
 ### Wall transitioning threshhold angle
 
 Defines the minimum angle (in degrees) required for the algorithm to create a transition between an even and odd number of walls. If a wedge shape exceeds this angle, no extra center wall will be added. Lowering this value reduces center walls but may cause under- or over-extrusion in sharp corners.