Wiki Update 11 - Strength (#10369)

* Create Patterns specific wiki

* Fix typos in installation instructions

Corrected the winget flag from --exact to -e and removed an extraneous backtick from the Mac xattr command in the README installation instructions.

* Improve README formatting and clarity

* Calibration Flow Ratio Yolo Archimedean cords

Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com>

* redirection/tab.cpp section

* Missing Frequent

* remove auto-cooling

* remove thumbnails

* seam pointers

* walls

* infill

* Image standarization

* Fix broken internal links

* Add reference note to Arachne wall generator docs

* OrcaSlicer std

* PrusaSlicer std

* 2d-lateral xlsx

* vertical patterns

* Redirections fix

* Update speed_settings_overhang_speed.md

* Fix to action

* FlowRate

Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com>

* Top Bottom Shells

* advanced strength

* Action fix

* Update How-to-wiki.md

* Home.md icons and reorganize sections

* Home Icons fix

* Update cornering-calib.md

* Update strength_settings_infill.md

* Update Auxiliary-fan.md

Co-Authored-By: Fisheye_3D <78997080+fisheye3d@users.noreply.github.com>

* Add warning about wiki maintenance status

doc/calibration/input-shaping-calib.md

@@ -39,7 +39,7 @@ Ussualy the recommended values modes are `MZV` or `EI` for Delta printers.
 
    ![IS_freq_menu](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_freq_menu.png?raw=true)
 
-   1. Measure the X and Y heights and read the frequency set at that point in Orca Slicer.
+   1. Measure the X and Y heights and read the frequency set at that point in OrcaSlicer.
 
    ![IS_damp_klipper_print_measure](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_damp_klipper_print_measure.jpg?raw=true)
    ![IS_freq_klipper_slicer_measure](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_freq_klipper_slicer_measure.png?raw=true)
@@ -53,7 +53,7 @@ Ussualy the recommended values modes are `MZV` or `EI` for Delta printers.
 
    ![IS_damp_menu](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_damp_menu.png?raw=true)
 
-   1. Measure the X and Y heights and read the damping set at that point in Orca Slicer.
+   1. Measure the X and Y heights and read the damping set at that point in OrcaSlicer.
 
    ![IS_damp_klipper_print_measure](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_damp_klipper_print_measure.jpg?raw=true)
    ![IS_damp_klipper_slicer_measure](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_damp_klipper_slicer_measure.png?raw=true)
@@ -87,7 +87,7 @@ ZV Input Shaping introduces an anti-vibration signal into the stepper motion for
 
    ![IS_freq_menu](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_freq_menu.png?raw=true)
 
-   1. Measure the X and Y heights and read the frequency set at that point in Orca Slicer.
+   1. Measure the X and Y heights and read the frequency set at that point in OrcaSlicer.
 
    ![IS_freq_marlin_print_measure](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_freq_marlin_print_measure.jpg?raw=true)
    ![IS_freq_marlin_slicer_measure](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_freq_marlin_slicer_measure.png?raw=true)
@@ -101,7 +101,7 @@ ZV Input Shaping introduces an anti-vibration signal into the stepper motion for
 
    ![IS_damp_menu](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_damp_menu.png?raw=true)
 
-   1. Measure the X and Y heights and read the damping set at that point in Orca Slicer.
+   1. Measure the X and Y heights and read the damping set at that point in OrcaSlicer.
 
    ![IS_damp_marlin_print_measure](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_damp_marlin_print_measure.jpg?raw=true)
    ![IS_damp_marlin_slicer_measure](https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_damp_marlin_slicer_measure.png?raw=true)