Prettified json formatting

prettified/simplified json formatting using jj

resources/profiles/Flashforge/process/0.06mm Standard @Flashforge AD5M 0.25 Nozzle.json

@@ -4,9 +4,7 @@
   "setting_id": "GP001",
   "instantiation": "true",
   "inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.25 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.25 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "is_custom_defined": "0",

resources/profiles/Flashforge/process/0.06mm Standard @Flashforge AD5M Pro 0.25 Nozzle.json

@@ -4,9 +4,7 @@
   "setting_id": "GP001",
   "instantiation": "true",
   "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.25 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.25 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "is_custom_defined": "0",

resources/profiles/Flashforge/process/0.08mm Standard @Flashforge AD5M 0.25 Nozzle.json

@@ -4,9 +4,7 @@
   "setting_id": "GP001",
   "instantiation": "true",
   "inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.25 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.25 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "is_custom_defined": "0",

resources/profiles/Flashforge/process/0.08mm Standard @Flashforge AD5M Pro 0.25 Nozzle.json

@@ -4,9 +4,7 @@
   "setting_id": "GP001",
   "instantiation": "true",
   "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.25 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.25 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "is_custom_defined": "0",

resources/profiles/Flashforge/process/0.10mm Standard @FF AD5X 0.25 nozzle.json

@@ -1,25 +1,23 @@
 {
-    "type": "process",
-    "brim_type": "auto_brim",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "setting_id": "GP012",
-    "instantiation": "true",
-    "compatible_printers": [
-    "Flashforge AD5X 0.25 nozzle"
-  ],
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
-    "is_custom_defined": "0",
-    "layer_height": "0.1",
-    "name": "0.10mm Standard @FF AD5X 0.25 nozzle",
-    "only_one_wall_top": "1",
-    "prime_tower_width": "45",
-    "print_settings_id": "0.10mm Standard @FF AD5X 0.25 nozzle",
-    "support_interface_spacing": "0.2",
-    "support_type": "tree(auto)",
-    "version": "2.2.0.0",
-    "wall_loops": "3"
+  "type": "process",
+  "brim_type": "auto_brim",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "setting_id": "GP012",
+  "instantiation": "true",
+  "compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
+  "is_custom_defined": "0",
+  "layer_height": "0.1",
+  "name": "0.10mm Standard @FF AD5X 0.25 nozzle",
+  "only_one_wall_top": "1",
+  "prime_tower_width": "45",
+  "print_settings_id": "0.10mm Standard @FF AD5X 0.25 nozzle",
+  "support_interface_spacing": "0.2",
+  "support_type": "tree(auto)",
+  "version": "2.2.0.0",
+  "wall_loops": "3"
 }

resources/profiles/Flashforge/process/0.10mm Standard @FF G4P 0.25 nozzle.json

@@ -6,9 +6,7 @@
   "filter_out_gap_fill": "0.1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.25 nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "gap_fill_target": "topbottom",
   "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
   "initial_layer_infill_speed": "80",

resources/profiles/Flashforge/process/0.10mm Standard @Flashforge AD5M 0.25 Nozzle.json

@@ -4,9 +4,7 @@
   "setting_id": "GP001",
   "instantiation": "true",
   "inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.25 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.25 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "is_custom_defined": "0",

resources/profiles/Flashforge/process/0.10mm Standard @Flashforge AD5M Pro 0.25 Nozzle.json

@@ -4,9 +4,7 @@
   "setting_id": "GP001",
   "instantiation": "true",
   "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.25 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.25 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "is_custom_defined": "0",

resources/profiles/Flashforge/process/0.12mm Detail @Flashforge Guider 2s 0.4 nozzle.json

@@ -104,7 +104,5 @@
   "wall_loops": "3",
   "wall_infill_order": "inner wall/outer wall/infill",
   "wall_generator": "arachne",
-  "compatible_printers": [
-    "Flashforge Guider 2s 0.4 nozzle"
-  ]
+  "compatible_printers": ["Flashforge Guider 2s 0.4 nozzle"]
 }

resources/profiles/Flashforge/process/0.12mm Fine @Flashforge AD5M 0.4 Nozzle.json

@@ -4,9 +4,7 @@
   "inherits": "0.20mm Standard @Flashforge AD5M 0.4 Nozzle",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.4 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "layer_height": "0.12",

resources/profiles/Flashforge/process/0.12mm Fine @Flashforge AD5M Pro 0.4 Nozzle.json

@@ -4,9 +4,7 @@
   "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.4 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "layer_height": "0.12",

resources/profiles/Flashforge/process/0.12mm Fine @Flashforge G3U 0.4 Nozzle.json

@@ -3,9 +3,7 @@
   "from": "system",
   "setting_id": "GP001",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider 3 Ultra 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider 3 Ultra 0.4 Nozzle"],
   "bridge_flow": "0.96",
   "bridge_speed": "20",
   "infill_wall_overlap": "25%",

resources/profiles/Flashforge/process/0.12mm Standard @FF AD5X 0.25 nozzle.json

@@ -1,24 +1,22 @@
 {
-    "type": "process",
-    "brim_type": "auto_brim",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "setting_id": "GP012",
-    "instantiation": "true",
-    "compatible_printers": [
-    "Flashforge AD5X 0.25 nozzle"
-  ],
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
-    "is_custom_defined": "0",
-    "name": "0.12mm Standard @FF AD5X 0.25 nozzle",
-    "only_one_wall_top": "1",
-    "prime_tower_width": "45",
-    "print_settings_id": "0.12mm Standard @FF AD5X 0.25 nozzle",
-    "support_interface_spacing": "0.2",
-    "support_type": "tree(auto)",
-    "version": "2.2.0.0",
-    "wall_loops": "3"
+  "type": "process",
+  "brim_type": "auto_brim",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "setting_id": "GP012",
+  "instantiation": "true",
+  "compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
+  "is_custom_defined": "0",
+  "name": "0.12mm Standard @FF AD5X 0.25 nozzle",
+  "only_one_wall_top": "1",
+  "prime_tower_width": "45",
+  "print_settings_id": "0.12mm Standard @FF AD5X 0.25 nozzle",
+  "support_interface_spacing": "0.2",
+  "support_type": "tree(auto)",
+  "version": "2.2.0.0",
+  "wall_loops": "3"
 }

resources/profiles/Flashforge/process/0.12mm Standard @FF G4P 0.25 nozzle.json

@@ -6,9 +6,7 @@
   "filter_out_gap_fill": "0.1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.25 nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "gap_fill_target": "topbottom",
   "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
   "initial_layer_infill_speed": "80",

resources/profiles/Flashforge/process/0.12mm Standard @Flashforge AD5M 0.25 Nozzle.json

@@ -4,9 +4,7 @@
   "inherits": "0.20mm Standard @Flashforge AD5M 0.4 Nozzle",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.25 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.25 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "setting_id": "GP012",
@@ -44,4 +42,4 @@
   "tree_support_tip_diameter": "1.2",
   "version": "1.8.0.0",
   "wipe_speed": "80%"
-}
+}

resources/profiles/Flashforge/process/0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle.json

@@ -4,9 +4,7 @@
   "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.25 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.25 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "setting_id": "GP011",
@@ -44,4 +42,4 @@
   "tree_support_tip_diameter": "1.2",
   "version": "1.8.0.0",
   "wipe_speed": "80%"
-}
+}

resources/profiles/Flashforge/process/0.14mm Standard @FF AD5X 0.25 nozzle.json

@@ -1,24 +1,22 @@
 {
-    "type": "process",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "setting_id": "GP012",
-    "instantiation": "true",
-    "compatible_printers": [
-    "Flashforge AD5X 0.25 nozzle"
-  ],
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
-    "is_custom_defined": "0",
-    "layer_height": "0.14",
-    "name": "0.14mm Standard @FF AD5X 0.25 nozzle",
-    "only_one_wall_top": "1",
-    "prime_tower_width": "45",
-    "print_settings_id": "0.14mm Standard @FF AD5X 0.25 nozzle",
-    "support_interface_spacing": "0.2",
-    "support_type": "tree(auto)",
-    "version": "2.2.0.0",
-    "wall_loops": "3"
+  "type": "process",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "setting_id": "GP012",
+  "instantiation": "true",
+  "compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",
+  "is_custom_defined": "0",
+  "layer_height": "0.14",
+  "name": "0.14mm Standard @FF AD5X 0.25 nozzle",
+  "only_one_wall_top": "1",
+  "prime_tower_width": "45",
+  "print_settings_id": "0.14mm Standard @FF AD5X 0.25 nozzle",
+  "support_interface_spacing": "0.2",
+  "support_type": "tree(auto)",
+  "version": "2.2.0.0",
+  "wall_loops": "3"
 }

resources/profiles/Flashforge/process/0.14mm Standard @FF G4P 0.25 nozzle.json

@@ -6,9 +6,7 @@
   "filter_out_gap_fill": "0.1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.25 nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
   "gap_fill_target": "topbottom",
   "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
   "initial_layer_infill_speed": "80",

resources/profiles/Flashforge/process/0.14mm Standard @Flashforge AD5M 0.25 Nozzle.json

@@ -3,9 +3,7 @@
   "from": "system",
   "setting_id": "GP001",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.25 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.25 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "inherits": "0.12mm Standard @Flashforge AD5M 0.25 Nozzle",

resources/profiles/Flashforge/process/0.14mm Standard @Flashforge AD5M Pro 0.25 Nozzle.json

@@ -3,9 +3,7 @@
   "from": "system",
   "setting_id": "GP001",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.25 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.25 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",

resources/profiles/Flashforge/process/0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle.json

@@ -104,7 +104,5 @@
   "wall_loops": "2",
   "wall_infill_order": "inner wall/outer wall/infill",
   "wall_generator": "arachne",
-  "compatible_printers": [
-    "Flashforge Guider 2s 0.4 nozzle"
-  ]
+  "compatible_printers": ["Flashforge Guider 2s 0.4 nozzle"]
 }

resources/profiles/Flashforge/process/0.16mm Standard @FF AD5X.json

@@ -1,30 +1,28 @@
 {
-    "type": "process",
-    "brim_type": "auto_brim",
-    "elefant_foot_compensation": "0.1",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "setting_id": "GP002",
-    "instantiation": "true",
-    "compatible_printers": [
-    "Flashforge AD5X 0.4 nozzle"
-  ],
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
-    "internal_solid_infill_speed": "300",
-    "is_custom_defined": "0",
-    "layer_height": "0.16",
-    "name": "0.16mm Standard @FF AD5X",
-    "only_one_wall_top": "1",
-    "prime_tower_width": "45",
-    "print_settings_id": "0.16mm Standard @FF AD5X",
-    "skirt_loops": "0",
-    "sparse_infill_speed": "330",
-    "support_bottom_z_distance": "0.14",
-    "support_interface_spacing": "0.2",
-    "support_top_z_distance": "0.14",
-    "support_type": "tree(auto)",
-    "version": "2.1.1.0"
+  "type": "process",
+  "brim_type": "auto_brim",
+  "elefant_foot_compensation": "0.1",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "setting_id": "GP002",
+  "instantiation": "true",
+  "compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
+  "internal_solid_infill_speed": "300",
+  "is_custom_defined": "0",
+  "layer_height": "0.16",
+  "name": "0.16mm Standard @FF AD5X",
+  "only_one_wall_top": "1",
+  "prime_tower_width": "45",
+  "print_settings_id": "0.16mm Standard @FF AD5X",
+  "skirt_loops": "0",
+  "sparse_infill_speed": "330",
+  "support_bottom_z_distance": "0.14",
+  "support_interface_spacing": "0.2",
+  "support_top_z_distance": "0.14",
+  "support_type": "tree(auto)",
+  "version": "2.1.1.0"
 }

resources/profiles/Flashforge/process/0.16mm Standard @FF G4P HF.json

@@ -5,9 +5,7 @@
   "filter_out_gap_fill": "0.1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.4 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
   "gap_fill_target": "topbottom",
   "infill_wall_overlap": "50%",
   "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",

resources/profiles/Flashforge/process/0.16mm Standard @FF G4P.json

@@ -5,9 +5,7 @@
   "filter_out_gap_fill": "0.1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.4 nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
   "gap_fill_target": "topbottom",
   "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
   "initial_layer_speed": "60",

resources/profiles/Flashforge/process/0.18mm Fine @FF AD5X 0.6 nozzle.json

@@ -1,25 +1,23 @@
 {
-    "type": "process",
-    "brim_type": "auto_brim",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "instantiation": "true",
-    "compatible_printers": [
-    "Flashforge AD5X 0.6 nozzle"
-  ],
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "infill_wall_overlap": "20%",
-    "inherits": "0.18mm Fine @Flashforge AD5M Pro 0.6 Nozzle",
-    "is_custom_defined": "0",
-    "name": "0.18mm Fine @FF AD5X 0.6 nozzle",
-    "only_one_wall_top": "1",
-    "prime_tower_brim_width": "5",
-    "prime_tower_width": "45",
-    "print_settings_id": "0.18mm Fine @FF AD5X 0.6 nozzle",
-    "skirt_loops": "0",
-    "support_bottom_z_distance": "0.22",
-    "support_top_z_distance": "0.22",
-    "version": "2.1.1.0"
+  "type": "process",
+  "brim_type": "auto_brim",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "instantiation": "true",
+  "compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "infill_wall_overlap": "20%",
+  "inherits": "0.18mm Fine @Flashforge AD5M Pro 0.6 Nozzle",
+  "is_custom_defined": "0",
+  "name": "0.18mm Fine @FF AD5X 0.6 nozzle",
+  "only_one_wall_top": "1",
+  "prime_tower_brim_width": "5",
+  "prime_tower_width": "45",
+  "print_settings_id": "0.18mm Fine @FF AD5X 0.6 nozzle",
+  "skirt_loops": "0",
+  "support_bottom_z_distance": "0.22",
+  "support_top_z_distance": "0.22",
+  "version": "2.1.1.0"
 }

resources/profiles/Flashforge/process/0.18mm Fine @Flashforge AD5M 0.6 Nozzle.json

@@ -4,9 +4,7 @@
   "inherits": "0.30mm Standard @Flashforge AD5M 0.6 Nozzle",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.6 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.6 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "layer_height": "0.18",

resources/profiles/Flashforge/process/0.18mm Fine @Flashforge AD5M Pro 0.6 Nozzle.json

@@ -4,9 +4,7 @@
   "inherits": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.6 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "layer_height": "0.18",

resources/profiles/Flashforge/process/0.18mm Standard @Flashforge G3U 0.6 Nozzle.json

@@ -4,9 +4,7 @@
   "setting_id": "GP001",
   "instantiation": "true",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
-  "compatible_printers": [
-    "Flashforge Guider 3 Ultra 0.6 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider 3 Ultra 0.6 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "is_custom_defined": "0",

resources/profiles/Flashforge/process/0.20mm Standard @FF AD5X.json

@@ -1,28 +1,26 @@
 {
-    "type": "process",
-    "brim_type": "auto_brim",
-    "elefant_foot_compensation": "0.1",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "setting_id": "GP002",
-    "instantiation": "true",
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
-    "compatible_printers": [
-    "Flashforge AD5X 0.4 nozzle"
-  ],
-    "initial_layer_print_height": "0.25",
-    "is_custom_defined": "0",
-    "name": "0.20mm Standard @FF AD5X",
-    "only_one_wall_top": "1",
-    "prime_tower_width": "45",
-    "print_settings_id": "0.20mm Standard @FF AD5X",
-    "skirt_loops": "0",
-    "support_bottom_z_distance": "0.16",
-    "support_interface_spacing": "0.2",
-    "support_top_z_distance": "0.16",
-    "support_type": "tree(auto)",
-    "version": "2.1.1.0"
+  "type": "process",
+  "brim_type": "auto_brim",
+  "elefant_foot_compensation": "0.1",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "setting_id": "GP002",
+  "instantiation": "true",
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
+  "compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
+  "initial_layer_print_height": "0.25",
+  "is_custom_defined": "0",
+  "name": "0.20mm Standard @FF AD5X",
+  "only_one_wall_top": "1",
+  "prime_tower_width": "45",
+  "print_settings_id": "0.20mm Standard @FF AD5X",
+  "skirt_loops": "0",
+  "support_bottom_z_distance": "0.16",
+  "support_interface_spacing": "0.2",
+  "support_top_z_distance": "0.16",
+  "support_type": "tree(auto)",
+  "version": "2.1.1.0"
 }

resources/profiles/Flashforge/process/0.20mm Standard @FF G4P HF.json

@@ -5,9 +5,7 @@
   "filter_out_gap_fill": "0.1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.4 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
   "gap_fill_target": "topbottom",
   "infill_wall_overlap": "50%",
   "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",

resources/profiles/Flashforge/process/0.20mm Standard @FF G4P PLA600.json

@@ -5,9 +5,7 @@
   "filter_out_gap_fill": "0.1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.4 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
   "gap_fill_target": "topbottom",
   "gap_infill_speed": "250",
   "infill_wall_overlap": "50%",

resources/profiles/Flashforge/process/0.20mm Standard @FF G4P.json

@@ -6,9 +6,7 @@
   "filter_out_gap_fill": "0.1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.4 nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
   "gap_fill_target": "topbottom",
   "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
   "initial_layer_print_height": "0.25",

resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json

@@ -6,7 +6,7 @@
   "setting_id": "GP001",
   "instantiation": "true",
   "layer_height": "0.2",
-  "initial_layer_print_height" : "0.2",
+  "initial_layer_print_height": "0.2",
   "line_width": "0.4",
   "initial_layer_line_width": "0.4",
   "outer_wall_line_width": "0.4",
@@ -54,9 +54,7 @@
   "wipe_speed": "200",
   "reduce_crossing_wall": "1",
   "max_travel_detour_distance": "50",
-  "compatible_printers": [
-    "Flashforge Adventurer 3 Series 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 3 Series 0.4 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": ""
 }

resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M 0.4 Nozzle.json

@@ -5,9 +5,7 @@
   "from": "system",
   "setting_id": "GP001",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.4 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "only_one_wall_top": "0",
@@ -17,5 +15,3 @@
   "skirt_loops": "0",
   "version": "2.1.1.0"
 }
-    
-

resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle.json

@@ -5,9 +5,7 @@
   "from": "system",
   "setting_id": "GP002",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.4 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "only_one_wall_top": "0",
@@ -16,5 +14,4 @@
   "print_settings_id": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
   "skirt_loops": "0",
   "version": "2.1.1.0"
-}  
-
+}

resources/profiles/Flashforge/process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json

@@ -20,9 +20,7 @@
   "brim_object_gap": "0.1",
   "brim_type": "no_brim",
   "brim_width": "5",
-  "compatible_printers": [
-    "Flashforge Guider 3 Ultra 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider 3 Ultra 0.4 Nozzle"],
   "compatible_printers_condition": "",
   "default_acceleration": "10000",
   "default_jerk": "0",

resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json

@@ -105,7 +105,5 @@
   "wall_loops": "2",
   "wall_infill_order": "inner wall/outer wall/infill",
   "wall_generator": "arachne",
-  "compatible_printers": [
-    "Flashforge Guider 2s 0.4 nozzle"
-  ]
+  "compatible_printers": ["Flashforge Guider 2s 0.4 nozzle"]
 }

resources/profiles/Flashforge/process/0.20mm Standard for engineering plastic @Flashforge G3U 0.4 Nozzle.json

@@ -1,40 +1,40 @@
 {
-    "type": "process",
-    "name": "0.20mm Standard for engineering plastic @Flashforge G3U 0.4 Nozzle",
-    "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
-    "from": "system",
-    "setting_id": "GP003",
-    "instantiation": "true",
-    "bottom_shell_layers": "4",
-    "bridge_flow": "0.96",
-    "bridge_speed": "20",
-    "gap_infill_speed": "100",
-    "infill_wall_overlap": "35%",
-    "initial_layer_speed": "30",
-    "initial_layer_travel_speed": "70%",
-    "inner_wall_speed": "100",
-    "internal_bridge_speed": "40",
-    "internal_solid_infill_speed": "100",
-    "is_custom_defined": "0",
-    "outer_wall_acceleration": "3000",
-    "outer_wall_speed": "100",
-    "print_settings_id": "0.20mm Standard for engineering plastic @Flashforge G3U 0.4 Nozzle",
-    "prime_tower_brim_width": "5",
-    "sparse_infill_acceleration": "70%",
-    "sparse_infill_density": "50%",
-    "sparse_infill_pattern": "zig-zag",
-    "sparse_infill_speed": "100",
-    "support_bottom_interface_spacing": "0.2",
-    "support_bottom_z_distance": "0.15",
-    "support_interface_spacing": "0.2",
-    "support_interface_top_layers": "2",
-    "support_line_width": "0.4",
-    "support_on_build_plate_only": "1",
-    "support_speed": "80",
-    "support_type": "tree(auto)",
-    "top_bottom_infill_wall_overlap": "50%",
-    "top_surface_speed": "100",
-    "version": "2.1.0.0",
-    "wall_loops": "3",
-    "xy_hole_compensation": "0.06"
+  "type": "process",
+  "name": "0.20mm Standard for engineering plastic @Flashforge G3U 0.4 Nozzle",
+  "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
+  "from": "system",
+  "setting_id": "GP003",
+  "instantiation": "true",
+  "bottom_shell_layers": "4",
+  "bridge_flow": "0.96",
+  "bridge_speed": "20",
+  "gap_infill_speed": "100",
+  "infill_wall_overlap": "35%",
+  "initial_layer_speed": "30",
+  "initial_layer_travel_speed": "70%",
+  "inner_wall_speed": "100",
+  "internal_bridge_speed": "40",
+  "internal_solid_infill_speed": "100",
+  "is_custom_defined": "0",
+  "outer_wall_acceleration": "3000",
+  "outer_wall_speed": "100",
+  "print_settings_id": "0.20mm Standard for engineering plastic @Flashforge G3U 0.4 Nozzle",
+  "prime_tower_brim_width": "5",
+  "sparse_infill_acceleration": "70%",
+  "sparse_infill_density": "50%",
+  "sparse_infill_pattern": "zig-zag",
+  "sparse_infill_speed": "100",
+  "support_bottom_interface_spacing": "0.2",
+  "support_bottom_z_distance": "0.15",
+  "support_interface_spacing": "0.2",
+  "support_interface_top_layers": "2",
+  "support_line_width": "0.4",
+  "support_on_build_plate_only": "1",
+  "support_speed": "80",
+  "support_type": "tree(auto)",
+  "top_bottom_infill_wall_overlap": "50%",
+  "top_surface_speed": "100",
+  "version": "2.1.0.0",
+  "wall_loops": "3",
+  "xy_hole_compensation": "0.06"
 }

resources/profiles/Flashforge/process/0.24mm Draft @FF AD5X.json

@@ -1,30 +1,28 @@
 {
-    "type": "process",
-    "brim_type": "auto_brim",
-    "elefant_foot_compensation": "0.1",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "setting_id": "GP002",
-    "instantiation": "true",
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "gap_infill_speed": "180",
-    "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
-    "compatible_printers": [
-    "Flashforge AD5X 0.4 nozzle"
-  ],
-    "initial_layer_print_height": "0.25",
-    "internal_solid_infill_speed": "230",
-    "is_custom_defined": "0",
-    "layer_height": "0.24",
-    "name": "0.24mm Draft @FF AD5X",
-    "only_one_wall_top": "1",
-    "prime_tower_width": "45",
-    "print_settings_id": "0.24mm Draft @FF AD5X",
-    "skirt_loops": "0",
-    "sparse_infill_speed": "230",
-    "support_interface_spacing": "0.2",
-    "support_type": "tree(auto)",
-    "version": "2.1.1.0"
+  "type": "process",
+  "brim_type": "auto_brim",
+  "elefant_foot_compensation": "0.1",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "setting_id": "GP002",
+  "instantiation": "true",
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "gap_infill_speed": "180",
+  "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
+  "compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
+  "initial_layer_print_height": "0.25",
+  "internal_solid_infill_speed": "230",
+  "is_custom_defined": "0",
+  "layer_height": "0.24",
+  "name": "0.24mm Draft @FF AD5X",
+  "only_one_wall_top": "1",
+  "prime_tower_width": "45",
+  "print_settings_id": "0.24mm Draft @FF AD5X",
+  "skirt_loops": "0",
+  "sparse_infill_speed": "230",
+  "support_interface_spacing": "0.2",
+  "support_type": "tree(auto)",
+  "version": "2.1.1.0"
 }

resources/profiles/Flashforge/process/0.24mm Draft @Flashforge AD5M 0.4 Nozzle.json

@@ -16,9 +16,7 @@
   "support_interface_speed": "40",
   "support_speed": "100",
   "support_top_z_distance": "0.15",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.4 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "skirt_loops": "0",

resources/profiles/Flashforge/process/0.24mm Draft @Flashforge AD5M Pro 0.4 Nozzle.json

@@ -17,9 +17,7 @@
   "support_interface_spacing": "0.3",
   "support_line_width": "0.4",
   "top_surface_line_width": "0.4",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.4 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "skirt_loops": "0",

resources/profiles/Flashforge/process/0.24mm Draft @Flashforge G3U 0.4 Nozzle.json

@@ -7,9 +7,7 @@
   "bridge_speed": "15",
   "infill_wall_overlap": "25%",
   "inherits": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
-  "compatible_printers": [
-    "Flashforge Guider 3 Ultra 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider 3 Ultra 0.4 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "internal_bridge_speed": "30",

resources/profiles/Flashforge/process/0.24mm Fine @FF AD5X 0.8 nozzle.json

@@ -1,26 +1,24 @@
 {
-    "type": "process",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "instantiation": "true",
-    "compatible_printers": [
-    "Flashforge AD5X 0.8 nozzle"
-  ],
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "infill_wall_overlap": "20%",
-    "inherits": "0.24mm Fine @Flashforge AD5M Pro 0.8 Nozzle",
-    "internal_bridge_speed": "35",
-    "is_custom_defined": "0",
-    "name": "0.24mm Fine @FF AD5X 0.8 nozzle",
-    "only_one_wall_top": "1",
-    "prime_tower_brim_width": "5",
-    "prime_tower_width": "45",
-    "prime_volume": "100",
-    "print_settings_id": "0.24mm Fine @FF AD5X 0.8 nozzle",
-    "solid_infill_direction": "0",
-    "thick_internal_bridges": "0",
-    "top_shell_layers": "4",
-    "version": "2.1.1.0"
+  "type": "process",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "instantiation": "true",
+  "compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "infill_wall_overlap": "20%",
+  "inherits": "0.24mm Fine @Flashforge AD5M Pro 0.8 Nozzle",
+  "internal_bridge_speed": "35",
+  "is_custom_defined": "0",
+  "name": "0.24mm Fine @FF AD5X 0.8 nozzle",
+  "only_one_wall_top": "1",
+  "prime_tower_brim_width": "5",
+  "prime_tower_width": "45",
+  "prime_volume": "100",
+  "print_settings_id": "0.24mm Fine @FF AD5X 0.8 nozzle",
+  "solid_infill_direction": "0",
+  "thick_internal_bridges": "0",
+  "top_shell_layers": "4",
+  "version": "2.1.1.0"
 }

resources/profiles/Flashforge/process/0.24mm Fine @Flashforge AD5M 0.8 Nozzle.json

@@ -5,9 +5,7 @@
   "from": "system",
   "instantiation": "true",
   "layer_height": "0.24",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.8 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.8 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "bottom_shell_layers": "2",

resources/profiles/Flashforge/process/0.24mm Fine @Flashforge AD5M Pro 0.8 Nozzle.json

@@ -5,9 +5,7 @@
   "from": "system",
   "instantiation": "true",
   "layer_height": "0.24",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.8 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.8 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "bottom_shell_layers": "2",

resources/profiles/Flashforge/process/0.24mm Standard @FF G4P HF.json

@@ -5,9 +5,7 @@
   "filter_out_gap_fill": "0.1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.4 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
   "gap_fill_target": "topbottom",
   "gap_infill_speed": "180",
   "infill_wall_overlap": "50%",

resources/profiles/Flashforge/process/0.24mm Standard @FF G4P.json

@@ -5,9 +5,7 @@
   "filter_out_gap_fill": "0.1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.4 nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
   "gap_fill_target": "topbottom",
   "gap_infill_speed": "180",
   "inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",

resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 HF nozzle.json

@@ -12,9 +12,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.6 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
   "gap_infill_speed": "70",
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",

resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json

@@ -11,9 +11,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.6 nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
   "initial_layer_acceleration": "800",

resources/profiles/Flashforge/process/0.30mm Draft @Flashforge Guider 2s 0.4 nozzle.json

@@ -105,7 +105,5 @@
   "wall_loops": "2",
   "wall_infill_order": "inner wall/outer wall/infill",
   "wall_generator": "arachne",
-  "compatible_printers": [
-    "Flashforge Guider 2s 0.4 nozzle"
-  ]
+  "compatible_printers": ["Flashforge Guider 2s 0.4 nozzle"]
 }

resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD3 0.4 Nozzle.json

@@ -6,7 +6,7 @@
   "setting_id": "GP001",
   "instantiation": "true",
   "layer_height": "0.3",
-  "initial_layer_print_height" : "0.3",
+  "initial_layer_print_height": "0.3",
   "line_width": "0.4",
   "initial_layer_line_width": "0.4",
   "outer_wall_line_width": "0.4",
@@ -54,9 +54,7 @@
   "wipe_speed": "200",
   "reduce_crossing_wall": "1",
   "max_travel_detour_distance": "50",
-  "compatible_printers": [
-    "Flashforge Adventurer 3 Series 0.4 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 3 Series 0.4 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": ""
 }

resources/profiles/Flashforge/process/0.30mm Standard @FF AD5X 0.6 nozzle.json

@@ -1,25 +1,23 @@
 {
-    "type": "process",
-    "brim_type": "auto_brim",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "compatible_printers": [
-    "Flashforge AD5X 0.6 nozzle"
-  ],
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "infill_wall_overlap": "20%",
-    "inherits": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
-    "is_custom_defined": "0",
-    "name": "0.30mm Standard @FF AD5X 0.6 nozzle",
-    "only_one_wall_top": "1",
-    "prime_tower_width": "45",
-    "print_settings_id": "0.30mm Standard @FF AD5X 0.6 nozzle",
-    "skirt_loops": "0",
-    "support_bottom_z_distance": "0.3",
-    "support_top_z_distance": "0.3",
-    "version": "2.1.1.0"
+  "type": "process",
+  "brim_type": "auto_brim",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "setting_id": "GP004",
+  "instantiation": "true",
+  "compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "infill_wall_overlap": "20%",
+  "inherits": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
+  "is_custom_defined": "0",
+  "name": "0.30mm Standard @FF AD5X 0.6 nozzle",
+  "only_one_wall_top": "1",
+  "prime_tower_width": "45",
+  "print_settings_id": "0.30mm Standard @FF AD5X 0.6 nozzle",
+  "skirt_loops": "0",
+  "support_bottom_z_distance": "0.3",
+  "support_top_z_distance": "0.3",
+  "version": "2.1.1.0"
 }

resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json

@@ -9,9 +9,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.6 nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
   "initial_layer_acceleration": "800",

resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json

@@ -6,7 +6,7 @@
   "setting_id": "GP003",
   "instantiation": "true",
   "layer_height": "0.3",
-  "initial_layer_print_height" : "0.3",
+  "initial_layer_print_height": "0.3",
   "line_width": "0.6",
   "initial_layer_line_width": "0.6",
   "outer_wall_line_width": "0.6",
@@ -54,9 +54,7 @@
   "wipe_speed": "200",
   "reduce_crossing_wall": "1",
   "max_travel_detour_distance": "50",
-  "compatible_printers": [
-    "Flashforge Adventurer 3 Series 0.6 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 3 Series 0.6 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": ""
-}
+}

resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M 0.6 Nozzle.json

@@ -5,9 +5,7 @@
   "from": "system",
   "setting_id": "GP003",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.6 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.6 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "only_one_wall_top": "0",

resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle.json

@@ -5,9 +5,7 @@
   "from": "system",
   "setting_id": "GP004",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.6 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "only_one_wall_top": "0",

resources/profiles/Flashforge/process/0.30mm Standard @Flashforge G3U 0.6 Nozzle.json

@@ -6,9 +6,7 @@
   "setting_id": "GP003",
   "instantiation": "true",
   "layer_height": "0.3",
-  "compatible_printers": [
-    "Flashforge Guider 3 Ultra 0.6 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider 3 Ultra 0.6 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "bottom_solid_infill_flow_ratio": "1.02",

resources/profiles/Flashforge/process/0.32mm Standard @FF G4P 0.8 HF nozzle.json

@@ -11,9 +11,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.8 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
   "initial_layer_acceleration": "800",

resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 HF nozzle.json

@@ -11,9 +11,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.6 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
   "gap_infill_speed": "70",
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",

resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json

@@ -9,9 +9,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.6 nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
   "initial_layer_acceleration": "800",

resources/profiles/Flashforge/process/0.3mm Standard @FF G4P 0.6 HF nozzle.json

@@ -11,9 +11,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.6 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
   "gap_infill_speed": "70",
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",

resources/profiles/Flashforge/process/0.40mm Standard @FF AD5X 0.8 nozzle.json

@@ -1,27 +1,25 @@
 {
-    "type": "process",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "instantiation": "true",
-    "compatible_printers": [
-        "Flashforge AD5X 0.8 nozzle"
-      ],
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "infill_wall_overlap": "20%",
-    "inherits": "0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle",
-    "internal_bridge_speed": "35",
-    "is_custom_defined": "0",
-    "name": "0.40mm Standard @FF AD5X 0.8 nozzle",
-    "only_one_wall_top": "1",
-    "prime_tower_width": "45",
-    "prime_volume": "100",
-    "print_settings_id": "0.40mm Standard @FF AD5X 0.8 nozzle",
-    "solid_infill_direction": "0",
-    "support_bottom_z_distance": "0.3",
-    "support_top_z_distance": "0.3",
-    "thick_internal_bridges": "0",
-    "top_shell_thickness": "0",
-    "version": "2.1.1.0"
+  "type": "process",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "instantiation": "true",
+  "compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "infill_wall_overlap": "20%",
+  "inherits": "0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle",
+  "internal_bridge_speed": "35",
+  "is_custom_defined": "0",
+  "name": "0.40mm Standard @FF AD5X 0.8 nozzle",
+  "only_one_wall_top": "1",
+  "prime_tower_width": "45",
+  "prime_volume": "100",
+  "print_settings_id": "0.40mm Standard @FF AD5X 0.8 nozzle",
+  "solid_infill_direction": "0",
+  "support_bottom_z_distance": "0.3",
+  "support_top_z_distance": "0.3",
+  "thick_internal_bridges": "0",
+  "top_shell_thickness": "0",
+  "version": "2.1.1.0"
 }

resources/profiles/Flashforge/process/0.40mm Standard @FF G4P 0.8 HF nozzle.json

@@ -9,9 +9,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.8 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
   "initial_layer_acceleration": "800",

resources/profiles/Flashforge/process/0.40mm Standard @Flashforge AD5M 0.8 Nozzle.json

@@ -4,9 +4,7 @@
   "inherits": "0.30mm Standard @Flashforge AD5M 0.6 Nozzle",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.8 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.8 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "setting_id": "GP002",
@@ -35,4 +33,4 @@
   "tree_support_tip_diameter": "1.2",
   "version": "1.8.0.0",
   "wipe_speed": "60%"
-}
+}

resources/profiles/Flashforge/process/0.40mm Standard @Flashforge AD5M Pro 0.8 Nozzle.json

@@ -4,9 +4,7 @@
   "inherits": "0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.8 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.8 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "setting_id": "GP001",
@@ -35,4 +33,4 @@
   "tree_support_tip_diameter": "1.2",
   "version": "1.8.0.0",
   "wipe_speed": "60%"
-}
+}

resources/profiles/Flashforge/process/0.40mm Standard @Flashforge G3U 0.8 Nozzle.json

@@ -6,9 +6,7 @@
   "setting_id": "GP003",
   "instantiation": "true",
   "layer_height": "0.4",
-  "compatible_printers": [
-    "Flashforge Guider 3 Ultra 0.8 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider 3 Ultra 0.8 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "bridge_flow": "0.96",

resources/profiles/Flashforge/process/0.42mm Draft @FF AD5X 0.6 nozzle.json

@@ -1,25 +1,23 @@
 {
-    "type": "process",
-    "brim_type": "auto_brim",
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "from": "system",
-    "instantiation": "true",
-    "compatible_printers": [
-    "Flashforge AD5X 0.6 nozzle"
-  ],
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "infill_wall_overlap": "20%",
-    "inherits": "0.42mm Draft @Flashforge AD5M Pro 0.6 Nozzle",
-    "is_custom_defined": "0",
-    "name": "0.42mm Draft @FF AD5X 0.6 nozzle",
-    "only_one_wall_top": "1",
-    "prime_tower_brim_width": "5",
-    "prime_tower_width": "45",
-    "print_settings_id": "0.42mm Draft @FF AD5X 0.6 nozzle",
-    "skirt_loops": "0",
-    "support_bottom_z_distance": "0.3",
-    "support_top_z_distance": "0.3",
-    "version": "2.1.1.0"
+  "type": "process",
+  "brim_type": "auto_brim",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "from": "system",
+  "instantiation": "true",
+  "compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "infill_wall_overlap": "20%",
+  "inherits": "0.42mm Draft @Flashforge AD5M Pro 0.6 Nozzle",
+  "is_custom_defined": "0",
+  "name": "0.42mm Draft @FF AD5X 0.6 nozzle",
+  "only_one_wall_top": "1",
+  "prime_tower_brim_width": "5",
+  "prime_tower_width": "45",
+  "print_settings_id": "0.42mm Draft @FF AD5X 0.6 nozzle",
+  "skirt_loops": "0",
+  "support_bottom_z_distance": "0.3",
+  "support_top_z_distance": "0.3",
+  "version": "2.1.1.0"
 }

resources/profiles/Flashforge/process/0.42mm Draft @Flashforge AD5M 0.6 Nozzle.json

@@ -5,9 +5,7 @@
   "from": "system",
   "instantiation": "true",
   "layer_height": "0.42",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.6 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.6 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "infill_wall_overlap": "40%",

resources/profiles/Flashforge/process/0.42mm Draft @Flashforge AD5M Pro 0.6 Nozzle.json

@@ -5,9 +5,7 @@
   "from": "system",
   "instantiation": "true",
   "layer_height": "0.42",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.6 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.6 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "bridge_flow": "0.96",

resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 HF nozzle.json

@@ -11,9 +11,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.6 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
   "gap_infill_speed": "70",
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",

resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json

@@ -9,9 +9,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.6 nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
   "initial_layer_acceleration": "800",

resources/profiles/Flashforge/process/0.42mm Standard @Flashforge G3U 0.6 Nozzle.json

@@ -4,9 +4,7 @@
   "setting_id": "GP001",
   "instantiation": "true",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
-  "compatible_printers": [
-    "Flashforge Guider 3 Ultra 0.6 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider 3 Ultra 0.6 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "initial_layer_print_height": "0.3",

resources/profiles/Flashforge/process/0.48mm Standard @FF G4P 0.8 HF nozzle.json

@@ -9,9 +9,7 @@
   "flush_into_support": "1",
   "from": "system",
   "instantiation": "true",
-  "compatible_printers": [
-    "Flashforge Guider4 Pro 0.8 HF nozzle"
-  ],
+  "compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
   "infill_wall_overlap": "15%",
   "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
   "initial_layer_acceleration": "800",

resources/profiles/Flashforge/process/0.56mm Draft @FF AD5X 0.8 nozzle.json

@@ -1,29 +1,27 @@
 {
-    "type": "process",
-    "from": "system",
-    "instantiation": "true",
-    "compatible_printers": [
-        "Flashforge AD5X 0.8 nozzle"
-      ],
-    "enable_prime_tower": "1",
-    "exclude_object": "1",
-    "filter_out_gap_fill": "0.1",
-    "gap_fill_target": "topbottom",
-    "infill_wall_overlap": "20%",
-    "inherits": "0.56mm Draft @Flashforge AD5M Pro 0.8 Nozzle",
-    "internal_bridge_speed": "35",
-    "is_custom_defined": "0",
-    "name": "0.56mm Draft @FF AD5X 0.8 nozzle",
-    "only_one_wall_top": "1",
-    "prime_tower_brim_width": "5",
-    "prime_tower_width": "45",
-    "prime_volume": "100",
-    "print_settings_id": "0.56mm Draft @FF AD5X 0.8 nozzle",
-    "solid_infill_direction": "0",
-    "support_bottom_z_distance": "0.3",
-    "support_top_z_distance": "0.3",
-    "thick_internal_bridges": "0",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0",
-    "version": "2.1.1.0"
+  "type": "process",
+  "from": "system",
+  "instantiation": "true",
+  "compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "filter_out_gap_fill": "0.1",
+  "gap_fill_target": "topbottom",
+  "infill_wall_overlap": "20%",
+  "inherits": "0.56mm Draft @Flashforge AD5M Pro 0.8 Nozzle",
+  "internal_bridge_speed": "35",
+  "is_custom_defined": "0",
+  "name": "0.56mm Draft @FF AD5X 0.8 nozzle",
+  "only_one_wall_top": "1",
+  "prime_tower_brim_width": "5",
+  "prime_tower_width": "45",
+  "prime_volume": "100",
+  "print_settings_id": "0.56mm Draft @FF AD5X 0.8 nozzle",
+  "solid_infill_direction": "0",
+  "support_bottom_z_distance": "0.3",
+  "support_top_z_distance": "0.3",
+  "thick_internal_bridges": "0",
+  "top_shell_layers": "4",
+  "top_shell_thickness": "0",
+  "version": "2.1.1.0"
 }

resources/profiles/Flashforge/process/0.56mm Draft @Flashforge AD5M 0.8 Nozzle.json

@@ -5,9 +5,7 @@
   "from": "system",
   "instantiation": "true",
   "layer_height": "0.56",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M 0.8 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M 0.8 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "bottom_shell_layers": "2",

resources/profiles/Flashforge/process/0.56mm Draft @Flashforge AD5M Pro 0.8 Nozzle.json

@@ -5,9 +5,7 @@
   "from": "system",
   "instantiation": "true",
   "layer_height": "0.56",
-  "compatible_printers": [
-    "Flashforge Adventurer 5M Pro 0.8 Nozzle"
-  ],
+  "compatible_printers": ["Flashforge Adventurer 5M Pro 0.8 Nozzle"],
   "filename_format": "{input_filename_base}.gcode",
   "post_process": "",
   "bottom_shell_layers": "2",

resources/profiles/Flashforge/process/fdm_process_common.json

@@ -1,71 +1,71 @@
 {
-    "type": "process",
-    "name": "fdm_process_common",
-    "from": "system",
-    "instantiation": "false",
-    "adaptive_layer_height": "0",
-    "reduce_crossing_wall": "0",
-    "bridge_flow": "0.95",
-    "bridge_speed": "25",
-    "brim_width": "5",
-    "print_sequence": "by layer",
-    "default_acceleration": "10000",
-    "bridge_no_support": "0",
-    "elefant_foot_compensation": "0.1",
-    "outer_wall_line_width": "0.42",
-    "outer_wall_speed": "120",
-    "line_width": "0.45",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
-    "initial_layer_line_width": "0.42",
-    "initial_layer_print_height": "0.2",
-    "initial_layer_speed": "20",
-    "gap_infill_speed": "30",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "sparse_infill_speed": "50",
-    "interface_shells": "0",
-    "detect_overhang_wall": "0",
-    "reduce_infill_retraction": "0",
-    "filename_format": "{input_filename_base}.gcode",
-    "wall_loops": "2",
-    "inner_wall_line_width": "0.45",
-    "inner_wall_speed": "40",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "nearest",
-    "skirt_distance": "2",
-    "skirt_height": "2",
-    "minimum_sparse_infill_area": "0",
-    "internal_solid_infill_line_width": "0.45",
-    "internal_solid_infill_speed": "40",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "support_filament": "0",
-    "support_line_width": "0.42",
-    "support_interface_filament": "0",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.15",
-    "support_interface_loop_pattern": "0",
-    "support_interface_top_layers": "2",
-    "support_interface_spacing": "0",
-    "support_interface_speed": "80",
-    "support_interface_pattern": "auto",
-    "support_base_pattern": "default",
-    "support_base_pattern_spacing": "2",
-    "support_speed": "40",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "0.5",
-    "detect_thin_wall": "0",
-    "top_surface_line_width": "0.42",
-    "top_surface_speed": "30",
-    "travel_speed": "400",
-    "enable_prime_tower": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": []
-}
+  "type": "process",
+  "name": "fdm_process_common",
+  "from": "system",
+  "instantiation": "false",
+  "adaptive_layer_height": "0",
+  "reduce_crossing_wall": "0",
+  "bridge_flow": "0.95",
+  "bridge_speed": "25",
+  "brim_width": "5",
+  "print_sequence": "by layer",
+  "default_acceleration": "10000",
+  "bridge_no_support": "0",
+  "elefant_foot_compensation": "0.1",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "120",
+  "line_width": "0.45",
+  "infill_direction": "45",
+  "sparse_infill_density": "15%",
+  "sparse_infill_pattern": "grid",
+  "initial_layer_line_width": "0.42",
+  "initial_layer_print_height": "0.2",
+  "initial_layer_speed": "20",
+  "gap_infill_speed": "30",
+  "infill_combination": "0",
+  "sparse_infill_line_width": "0.45",
+  "infill_wall_overlap": "15%",
+  "sparse_infill_speed": "50",
+  "interface_shells": "0",
+  "detect_overhang_wall": "0",
+  "reduce_infill_retraction": "0",
+  "filename_format": "{input_filename_base}.gcode",
+  "wall_loops": "2",
+  "inner_wall_line_width": "0.45",
+  "inner_wall_speed": "40",
+  "print_settings_id": "",
+  "raft_layers": "0",
+  "seam_position": "nearest",
+  "skirt_distance": "2",
+  "skirt_height": "2",
+  "minimum_sparse_infill_area": "0",
+  "internal_solid_infill_line_width": "0.45",
+  "internal_solid_infill_speed": "40",
+  "spiral_mode": "0",
+  "standby_temperature_delta": "-5",
+  "enable_support": "0",
+  "support_filament": "0",
+  "support_line_width": "0.42",
+  "support_interface_filament": "0",
+  "support_on_build_plate_only": "0",
+  "support_top_z_distance": "0.15",
+  "support_interface_loop_pattern": "0",
+  "support_interface_top_layers": "2",
+  "support_interface_spacing": "0",
+  "support_interface_speed": "80",
+  "support_interface_pattern": "auto",
+  "support_base_pattern": "default",
+  "support_base_pattern_spacing": "2",
+  "support_speed": "40",
+  "support_threshold_angle": "30",
+  "support_object_xy_distance": "0.5",
+  "detect_thin_wall": "0",
+  "top_surface_line_width": "0.42",
+  "top_surface_speed": "30",
+  "travel_speed": "400",
+  "enable_prime_tower": "0",
+  "prime_tower_width": "60",
+  "xy_hole_compensation": "0",
+  "xy_contour_compensation": "0",
+  "compatible_printers": []
+}

resources/profiles/Flashforge/process/fdm_process_flashforge_0.20.json

@@ -19,4 +19,4 @@
   "gcode_label_objects": "0",
   "slow_down_layers": "1",
   "wipe_speed": "200"
-}
+}

resources/profiles/Flashforge/process/fdm_process_flashforge_0.30.json

@@ -27,4 +27,4 @@
   "gcode_label_objects": "0",
   "slow_down_layers": "1",
   "wipe_speed": "200"
-}
+}

resources/profiles/Flashforge/process/fdm_process_flashforge_0.40.json

@@ -27,4 +27,4 @@
   "gcode_label_objects": "0",
   "slow_down_layers": "1",
   "wipe_speed": "200"
-}
+}

resources/profiles/Flashforge/process/fdm_process_flashforge_common.json

@@ -1,72 +1,72 @@
 {
-    "type": "process",
-    "name": "fdm_process_flashforge_common",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "instantiation": "false",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "3",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "brim_object_gap": "0.1",
-    "compatible_printers_condition": "",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0.15",
-    "enable_arc_fitting": "0",
-    "outer_wall_acceleration": "5000",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.42",
-    "internal_bridge_support_thickness": "0.8",
-    "initial_layer_acceleration": "500",
-    "travel_acceleration": "10000",
-    "inner_wall_acceleration": "5000",
-    "initial_layer_line_width": "0.50",
-    "sparse_infill_speed": "100",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "layer_height": "0.2",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "40",
-    "overhang_3_4_speed": "20",
-    "overhang_4_4_speed": "10",
-    "only_one_wall_top": "1",
-    "seam_position": "aligned",
-    "skirt_height": "1",
-    "skirt_loops": "2",
-    "brim_type": "no_brim",
-    "exclude_object": "0",
-    "wall_generator": "classic",
-    "minimum_sparse_infill_area": "15",
-    "internal_solid_infill_line_width": "0.42",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "default",
-    "support_top_z_distance": "0.18",
-    "support_bottom_z_distance": "0.18",
-    "support_interface_bottom_layers": "2",
-    "support_interface_spacing": "0.5",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "150",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "0.3",
-    "tree_support_branch_angle": "45",
-    "tree_support_wall_count": "0",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_acceleration": "2000",
-    "top_shell_layers": "5",
-    "top_shell_thickness": "1",
-    "initial_layer_speed": "50",
-    "initial_layer_infill_speed": "65",
-    "internal_solid_infill_speed": "150",
-    "top_surface_speed": "200",
-    "travel_speed": "500",
-    "wipe_tower_no_sparse_layers": "0",
-    "compatible_printers": []
+  "type": "process",
+  "name": "fdm_process_flashforge_common",
+  "inherits": "fdm_process_common",
+  "from": "system",
+  "instantiation": "false",
+  "max_travel_detour_distance": "0",
+  "bottom_surface_pattern": "monotonic",
+  "bottom_shell_layers": "3",
+  "bottom_shell_thickness": "0",
+  "bridge_flow": "1",
+  "brim_object_gap": "0.1",
+  "compatible_printers_condition": "",
+  "draft_shield": "disabled",
+  "elefant_foot_compensation": "0.15",
+  "enable_arc_fitting": "0",
+  "outer_wall_acceleration": "5000",
+  "wall_infill_order": "inner wall/outer wall/infill",
+  "line_width": "0.42",
+  "internal_bridge_support_thickness": "0.8",
+  "initial_layer_acceleration": "500",
+  "travel_acceleration": "10000",
+  "inner_wall_acceleration": "5000",
+  "initial_layer_line_width": "0.50",
+  "sparse_infill_speed": "100",
+  "ironing_flow": "15%",
+  "ironing_spacing": "0.1",
+  "ironing_speed": "15",
+  "ironing_type": "no ironing",
+  "layer_height": "0.2",
+  "reduce_infill_retraction": "1",
+  "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+  "detect_overhang_wall": "1",
+  "overhang_1_4_speed": "0",
+  "overhang_2_4_speed": "40",
+  "overhang_3_4_speed": "20",
+  "overhang_4_4_speed": "10",
+  "only_one_wall_top": "1",
+  "seam_position": "aligned",
+  "skirt_height": "1",
+  "skirt_loops": "2",
+  "brim_type": "no_brim",
+  "exclude_object": "0",
+  "wall_generator": "classic",
+  "minimum_sparse_infill_area": "15",
+  "internal_solid_infill_line_width": "0.42",
+  "resolution": "0.012",
+  "support_type": "normal(auto)",
+  "support_style": "default",
+  "support_top_z_distance": "0.18",
+  "support_bottom_z_distance": "0.18",
+  "support_interface_bottom_layers": "2",
+  "support_interface_spacing": "0.5",
+  "support_base_pattern": "rectilinear",
+  "support_base_pattern_spacing": "2.5",
+  "support_speed": "150",
+  "support_threshold_angle": "30",
+  "support_object_xy_distance": "0.3",
+  "tree_support_branch_angle": "45",
+  "tree_support_wall_count": "0",
+  "top_surface_pattern": "monotonicline",
+  "top_surface_acceleration": "2000",
+  "top_shell_layers": "5",
+  "top_shell_thickness": "1",
+  "initial_layer_speed": "50",
+  "initial_layer_infill_speed": "65",
+  "internal_solid_infill_speed": "150",
+  "top_surface_speed": "200",
+  "travel_speed": "500",
+  "wipe_tower_no_sparse_layers": "0",
+  "compatible_printers": []
 }