MINIIS Profiles: Bug fixes in processes regarding line width, fewer wall loops on bigger nozzles (#5699)

* added Prusa Mini with Input Shaper to profiles

* refactoring to more reusable settings

* added more processes, changed settings

* Update 0.15mm Speed @MINIIS.json

* Update 0.10mm Speed @MINIIS.json

* changed to cubic because of speed

* further changes after reviewing prusa slicer settings

* simplified machine settings

* retraction speeds according to prusa slicer

* changed max flow according to prusa slicer

* after clearification at the prusaslicer repository M900 got removed

* precise wall per default

* enable reverse overhang on odd by default

* added settings from prusa slicer

* changed cooling setings

* changed default to inner-outer-inner wall

inner-outer-inner gives pretty good overhangs with better surface

* new profiles for bigger nozzles, changed some cooling settings according to prusaslicer

* profiles for different nozzles sizes, better speed settings

* initial layer height was wrong

* wrong initial layer height

* set the correct accelerations

* changed firmware version number

* using pressure advance UI setting instead of custom filament g-code

* Update Prusa Generic PC.json

* Update Prusa Generic PC.json

* changed max flow for PC

* added PVA filament profiles

* bug fix in filament loading

* changed line width according to prusa slicer

* changed heatbed temperature for Minis capabilities

* set default support to snug

* changed default filament setting to the correct value

* changed line with to the correct values according to prusaslicer profiles

* Update Prusa MINIIS 0.4 nozzle.json

updated firmware version

* updated firmware version

* changed first layer height according to optimal value of the respective nozzle size

* changed wall loops to 2 for bigger nozzles

resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json

@@ -14,9 +14,10 @@
   "internal_solid_infill_line_width": "0.9",
   "support_line_width": "0.65",
   "layer_height": "0.3",
-  "initial_layer_print_height": "0.2",
+  "initial_layer_print_height": "0.4",
   "top_shell_thickness": "0.7",
   "top_shell_layers": "3",
+  "wall_loops": "2",
   "bottom_shell_thickness": "0.5",
   "bottom_shell_layers": "2",
   "travel_speed": "300",