mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-25 11:52:05 +00:00
Sync Elegoo profiles (#13790)
* Sync Elegoo profiles from ElegooSlicer
Update vendor Elegoo.json, filament/machine/process trees, and OrcaFilamentLibrary
Elegoo entries. Align machine default material names with existing filament preset names.
* feat: expose filament_name for G-code export filename format
Derive from filament_settings_id for the first active extruder and strip the suffix after @, matching ElegooSlicer so filename_format can use {filament_name}.
* chore: reorder Elegoo entries in OrcaFilamentLibrary
Group Elegoo @base profiles and bump library version to 02.03.02.62.
* sync OrcaFilamentLibrary.json with Elegoo filament profiles
* fix: clean up Elegoo process renamed_from for profile validation
Add single renamed_from only where preset names changed from legacy Orca
names; remove duplicate Rapid @System library entries that conflicted with
ECC2 vendor presets.
* fix(profiles): add missing Elegoo renamed_from for profile validation
CI custom-preset tests still inherit legacy Orca preset names that no
longer exist after the Elegoo bundle update. Add renamed_from on process,
Neptune 4 machines, OrcaFilamentLibrary filaments, and Giga profiles so
inherits resolve again, without changing print parameters.
This commit is contained in:
wujie
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ABS @System",
|
||||
"inherits": "Elegoo ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEABSS00",
|
||||
"instantiation": "true",
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -3,21 +3,51 @@
|
||||
"name": "Elegoo ABS @base",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "EABSB00",
|
||||
"filament_id": "OEABSB00",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -3,7 +3,20 @@
|
||||
"name": "Elegoo ASA @System",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OGFSE06_00",
|
||||
"setting_id": "OEASAS00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": []
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"renamed_from": "Elegoo ASA"
|
||||
}
|
||||
|
||||
@@ -3,15 +3,45 @@
|
||||
"name": "Elegoo ASA @base",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFE06",
|
||||
"filament_id": "OEASAB00",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA-CF @System",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEASACFS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -1,23 +1,92 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PAHT @base",
|
||||
"inherits": "fdm_filament_paht",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "EPAHTB00",
|
||||
"filament_id": "OEPAHTB0",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,69 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PAHT-CF @System",
|
||||
"inherits": "Elegoo PAHT @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPAHTCFS00",
|
||||
"instantiation": "true",
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -0,0 +1,54 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC @System",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPCS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -3,21 +3,27 @@
|
||||
"name": "Elegoo PC @base",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"filament_id": "EPCB00",
|
||||
"filament_id": "OEPCB00",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,39 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC-FR @System",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPCFRS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -0,0 +1,57 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PET-CF @System",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPETCFS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_type": [
|
||||
"PET-CF"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG @System",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPETGS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "Elegoo PETG @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "EPETGB00",
|
||||
"filament_id": "OEPETGB0",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
@@ -26,12 +26,12 @@
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
@@ -44,12 +44,6 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
@@ -77,7 +71,10 @@
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,42 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG HF @System",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "OERPETGHFS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -1,10 +1,22 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @System",
|
||||
"renamed_from": "Elegoo PETG Pro @System",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "OGFSE02_00",
|
||||
"setting_id": "OEPETGPROS00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": []
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"renamed_from": "Elegoo PETG PRO"
|
||||
}
|
||||
|
||||
@@ -1,74 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "OGFE02",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"12.49"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG Translucent @System",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPETGTRANSS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -1,9 +1,45 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG-CF @System",
|
||||
"inherits": "Elegoo PETG-CF @base",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "OGFSE03_00",
|
||||
"setting_id": "OEPETGCFS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
|
||||
@@ -1,74 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG-CF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "OGFE03",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"18.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.29"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,42 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG-GF @System",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPETGFS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -3,7 +3,29 @@
|
||||
"name": "Elegoo PLA @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OGFSE04_00",
|
||||
"setting_id": "OEPLAS00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": []
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"renamed_from": "Elegoo PLA"
|
||||
}
|
||||
|
||||
@@ -3,10 +3,13 @@
|
||||
"name": "Elegoo PLA @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFE04",
|
||||
"filament_id": "OEPLAB00",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"0"
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
@@ -17,7 +20,31 @@
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Basic @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLABASICS00",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Galaxy @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLAGALAXYS00",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Glow @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLAGLOWS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Marble @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLAMARBLES00",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -0,0 +1,52 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLAMS00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"renamed_from": "Elegoo PLA Matte"
|
||||
}
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "EPLAMB00",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLAPROS00",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.032"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"renamed_from": "Elegoo PLA PRO"
|
||||
}
|
||||
@@ -0,0 +1,52 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLASS00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"renamed_from": "Elegoo PLA Silk"
|
||||
}
|
||||
@@ -1,29 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "EPLASB00",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,39 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Sparkle @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLASPARKLES00",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -0,0 +1,39 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Translucent2 @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLATRA2S00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Wood @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLAWOODS00",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+ @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLAPLUSS00",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"renamed_from": "Elegoo PLA+"
|
||||
}
|
||||
@@ -0,0 +1,61 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF @System",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OEPLACFS00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.032"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"renamed_from": "Elegoo PLA-CF"
|
||||
}
|
||||
@@ -1,38 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "EPLACFB00",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
@@ -1,9 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @System",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "OGFSE01_00",
|
||||
"setting_id": "OERPETGS00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": []
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"renamed_from": "Elegoo Rapid PETG;Elegoo Rapid PETG+"
|
||||
}
|
||||
|
||||
@@ -1,74 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "OGFE01",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"13.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.28"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
@@ -1,9 +1,49 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @System",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "OGFSE05_00",
|
||||
"setting_id": "OERPLAPLUSS00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": []
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"renamed_from": "Elegoo Rapid PLA+"
|
||||
}
|
||||
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFE05",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid TPU 95A @System",
|
||||
"inherits": "Elegoo TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "OERTPU95AS00",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -1,9 +1,18 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @System",
|
||||
"inherits": "Elegoo TPU 95A @base",
|
||||
"inherits": "Elegoo TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "OGFSE07_00",
|
||||
"setting_id": "OETPU95AS00",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": []
|
||||
}
|
||||
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "OGFE07",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -3,17 +3,20 @@
|
||||
"name": "Elegoo TPU @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "ETPUB00",
|
||||
"filament_id": "OETPUB00",
|
||||
"instantiation": "false",
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
@@ -22,5 +25,11 @@
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user