mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-10 02:37:04 +00:00
Sync Elegoo profiles (#13790)
* Sync Elegoo profiles from ElegooSlicer
Update vendor Elegoo.json, filament/machine/process trees, and OrcaFilamentLibrary
Elegoo entries. Align machine default material names with existing filament preset names.
* feat: expose filament_name for G-code export filename format
Derive from filament_settings_id for the first active extruder and strip the suffix after @, matching ElegooSlicer so filename_format can use {filament_name}.
* chore: reorder Elegoo entries in OrcaFilamentLibrary
Group Elegoo @base profiles and bump library version to 02.03.02.62.
* sync OrcaFilamentLibrary.json with Elegoo filament profiles
* fix: clean up Elegoo process renamed_from for profile validation
Add single renamed_from only where preset names changed from legacy Orca
names; remove duplicate Rapid @System library entries that conflicted with
ECC2 vendor presets.
* fix(profiles): add missing Elegoo renamed_from for profile validation
CI custom-preset tests still inherit legacy Orca preset names that no
longer exist after the Elegoo bundle update. Add renamed_from on process,
Neptune 4 machines, OrcaFilamentLibrary filaments, and Giga profiles so
inherits resolve again, without changing print parameters.
This commit is contained in:
wujie
@@ -1,23 +1,24 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.4 nozzle",
|
||||
"inherits": "fdm_machine_ecc",
|
||||
"inherits": "fdm_elegoo_3dp_001_common",
|
||||
"from": "system",
|
||||
"setting_id": "EC04",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"257x0",
|
||||
"257x257",
|
||||
"0x257"
|
||||
"256x0",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"printable_height": "257",
|
||||
"printable_height": "256",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
@@ -27,6 +28,12 @@
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"bed_texture_area": [
|
||||
"0x-10",
|
||||
"256x-10",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
@@ -49,10 +56,13 @@
|
||||
"support_air_filtration": "1",
|
||||
"default_bed_type": "4",
|
||||
"upward_compatible_machine": [],
|
||||
"manual_filament_change": "0",
|
||||
"purge_in_prime_tower": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"change_filament_gcode": "M600",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
"support_multi_filament": "0",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_start_gcode": ";;===== date: 20251011 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\n;bed_level_temp:[bed_temperature_initial_layer_single]\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM190 S[bed_temperature_initial_layer_single]\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250603 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800\nG2 I1 J0 Z{max_layer_z+0.5} F3000 ; lower z a little\nG90\n{if max_layer_z > 100}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
}
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_centuri_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EC;Elegoo Rapid PETG+;;Elegoo Rapid PLA+ @EC;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EC;Elegoo TPU 95A @EC"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG @0.2 nozzle;Elegoo PETG @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EC;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EC;Elegoo TPU 95A @EC;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EC;Elegoo PLA Galaxy @EC;Elegoo PLA Marble @EC;Elegoo PLA Sparkle @EC;Elegoo PLA Wood @EC;Elegoo Rapid TPU 95A @EC;Elegoo ABS @0.2 nozzle;Elegoo ABS @EC;Elegoo PAHT-CF @EC;Elegoo PC @0.2 nozzle;Elegoo PC @EC;Elegoo PC-FR @0.2 nozzle;Elegoo PC-FR @EC;Elegoo PETG-CF @EC;Elegoo PETG-GF @EC;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EC"
|
||||
}
|
||||
|
||||
@@ -1,23 +1,24 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"inherits": "fdm_machine_ecc",
|
||||
"inherits": "fdm_elegoo_3dp_001_common",
|
||||
"from": "system",
|
||||
"setting_id": "ECC04",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"257x0",
|
||||
"257x257",
|
||||
"0x257"
|
||||
"256x0",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"printable_height": "257",
|
||||
"printable_height": "256",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
@@ -27,6 +28,12 @@
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"bed_texture_area": [
|
||||
"0x-10",
|
||||
"256x-10",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
@@ -42,6 +49,7 @@
|
||||
"0x0"
|
||||
],
|
||||
"default_bed_type": "4",
|
||||
"auto_toolchange_command": "0",
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
@@ -49,10 +57,13 @@
|
||||
"scan_first_layer": "1",
|
||||
"support_air_filtration": "1",
|
||||
"upward_compatible_machine": [],
|
||||
"manual_filament_change": "0",
|
||||
"purge_in_prime_tower": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"change_filament_gcode": "M600",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "\n;==========CC_CHANGE_FILAMENT_GCODE_CCB==========\n;===== date: 2025-12-04-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n;==========CC_CHANGE_FILAMENT_GCODE_CCE==========",
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
"support_multi_filament": "1",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_start_gcode": ";===== CC_START_GCODE ================\n;===== date: 2026-04-28-001 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\n;bed_level_temp:[bed_temperature_initial_layer_single]\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nM83\nG28 ;home\nM729 ;Clean Nozzle\nM190 S[bed_temperature_initial_layer_single]\n\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\n\n\nG90\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X0 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X0.9 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== CC_END_GCODE ================\n;===== date: 2025-12-04-001 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800\nG2 I1 J0 Z{max_layer_z+0.5} F3000 ; lower z a little\nG90\n{if max_layer_z > 100}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM749\nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
}
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC;Elegoo PLA-CF @ECC;Elegoo PLA @ECC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC;Elegoo Rapid PETG+;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC;Elegoo TPU 95A @ECC"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC;Elegoo PETG @0.2 nozzle;Elegoo PETG @ECC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC;Elegoo PLA-CF @ECC;Elegoo PLA @ECC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC;Elegoo TPU 95A @ECC;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @ECC;Elegoo PLA Galaxy @ECC;Elegoo PLA Marble @ECC;Elegoo PLA Sparkle @ECC;Elegoo PLA Wood @ECC;Elegoo Rapid TPU 95A @ECC;Elegoo ABS @0.2 nozzle;Elegoo ABS @ECC;Elegoo PAHT-CF @ECC;Elegoo PC @0.2 nozzle;Elegoo PC @ECC;Elegoo PC-FR @0.2 nozzle;Elegoo PC-FR @ECC;Elegoo PETG-CF @ECC;Elegoo PETG-GF @ECC;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @ECC"
|
||||
}
|
||||
|
||||
@@ -1,142 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_ecc",
|
||||
"inherits": "fdm_machine_ecc_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"256x0",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"extruder_clearance_max_radius": "68",
|
||||
"extruder_clearance_height_to_lid": "90",
|
||||
"nozzle_volume": "107",
|
||||
"printer_structure": "corexy",
|
||||
"best_object_pos": "0.5x0.5",
|
||||
"retraction_minimum_travel": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.2"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"thumbnails": [
|
||||
"320x320",
|
||||
"160x160"
|
||||
],
|
||||
"thumbnails_format": "PNG",
|
||||
"nozzle_type": "brass",
|
||||
"single_extruder_multi_material": "1",
|
||||
"machine_end_gcode": ";===== date: 20240510 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y245 F3000\n\nG1 X65 Y245 F12000\nG1 Y245 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n",
|
||||
"layer_change_gcode": ";LAYER:{layer_num+1}\n",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M600"
|
||||
}
|
||||
@@ -1,130 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_ecc_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"support_chamber_temp_control": "0",
|
||||
"printer_technology": "FFF",
|
||||
"printer_notes": "",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printer_settings_id": "Elegoo",
|
||||
"disable_m73": "1",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"cooling_tube_retraction": "90",
|
||||
"parking_pos_retraction": "90",
|
||||
"single_extruder_multi_material": "1",
|
||||
"support_air_filtration": "0",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"default_filament_profile": [],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"layer_change_gcode": "",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": "",
|
||||
"change_filament_gcode": "",
|
||||
"purge_in_prime_tower": "0",
|
||||
"manual_filament_change": "1",
|
||||
"enable_filament_ramming": "0"
|
||||
}
|
||||
@@ -65,18 +65,30 @@
|
||||
"bed_mesh_min": "10,10",
|
||||
"bed_mesh_probe_distance": "22,22",
|
||||
"disable_m73": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"20",
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"20",
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"change_filament_gcode": "\n;==========CC2_CHANGE_FILAMENT_GCODE==========\n;===== date: 2025-10-16-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n",
|
||||
"layer_change_gcode": "M73 L{layer_num+1}\n;LAYER:{layer_num+1}\n",
|
||||
"machine_end_gcode": ";===== CC&CC2_END_GCODE ================\n;===== date: 2025-10-16-001 =====================\n\nM104 S0\nM140 S0 ;Turn-off bed\nM83\nG92 E0 ; zero the extruder\nG1 E-1.5 F1800\nG2 I0 J1 Z{max_layer_z+0.5} F3000 ; lower z a little\nM106 S0\nM106 P2 S0\nG90\n{if max_layer_z > 75}G1 Z{min(max_layer_z+5, printable_height+0.5)} F20000{else}G1 Z80 F20000 {endif}; Move print head up \nG180 S9\nM84\n",
|
||||
"machine_start_gcode": ";===== CC2_START_GCODE ================\n;===== date: 2025-11-06-001 =====================\n\nG90\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single] A\nM106 S0\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 FROM_SLICER=1\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\nG28\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n{if first_layer_print_min[1] > 0.5}\nG180 S7\nG1 X{print_bed_max[0]*0.5-1} Y-1.2 F20000\nG1 Z0.5 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 E6 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nM106 S200\nG1 X{print_bed_max[0]*0.5-41} E20 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nG1 F6000\nG1 X{print_bed_max[0]*0.5-46} E0.8\n{else}\nG1 E30 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))}\n{endif}\nM106 S0\nG180 S8\nG1 F20000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"change_filament_gcode": "\n;==========CC2_CHANGE_FILAMENT_GCODE==========\n;===== date: 2026-01-16-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n",
|
||||
"layer_change_gcode": "M73 L{layer_num+1}\n;LAYER:{layer_num+1}\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_end_gcode": ";===== CC2_END_GCODE ================\n;===== date: 2026-01-16-001 =====================\n\n\nM140 S0 ;Turn-off bed\nM83\nG92 E0 ; zero the extruder\nG1 E-1.5 F1800\nG2 I0 J1 Z{max_layer_z+0.5} F3000 ; lower z a little\nM106 S0\nM106 P2 S0\nG90\n{if max_layer_z > 75}G1 Z{min(max_layer_z+5, printable_height+0.5)} F20000{else}G1 Z80 F20000 {endif}; Move print head up \nG180 S9\nM104 S0\nM84\n",
|
||||
"machine_start_gcode": ";===== CC2_START_GCODE ================\n;===== date: 2026-01-16-001 =====================\n\nG90\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single] A\nM106 S0\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 FROM_SLICER=1\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\nG28\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n{if first_layer_print_min[1] > 0.5}\nG180 S7\nG1 X{print_bed_max[0]*0.5-1} Y-1.2 F20000\nG1 Z0.5 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 E6 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nM106 S200\nG1 X{print_bed_max[0]*0.5-41} E20 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nG1 F6000\nG1 X{print_bed_max[0]*0.5-46} E0.8\n{else}\nG1 E30 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))}\n{endif}\nM106 S0\nG180 S8\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0.5"
|
||||
]
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC2;Elegoo PETG @0.2 nozzle;Elegoo PETG @ECC2;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC2;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC2;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC2;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC2;Elegoo PLA-CF @ECC2;Elegoo PLA @ECC2;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC2;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC2;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC2;Elegoo TPU 95A @ECC2;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @ECC2;Elegoo PLA Galaxy @ECC2;Elegoo PLA Marble @ECC2; Elegoo PLA Sparkle @ECC2;Elegoo PLA Wood @ECC2;Elegoo Rapid TPU 95A @ECC2;Elegoo ABS @0.2 nozzle;Elegoo ABS @ECC2;Elegoo PAHT-CF @ECC2;Elegoo PC @0.2 nozzle;Elegoo PC @ECC2;Elegoo PC-FR @0.2 nozzle;Elegoo PC-FR @ECC2;Elegoo PETG-CF @ECC2;Elegoo PETG-GF @ECC2;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @ECC2"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC2;Elegoo PETG @0.2 nozzle;Elegoo PETG @ECC2;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC2;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC2;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC2;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC2;Elegoo PLA-CF @ECC2;Elegoo PLA @ECC2;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC2;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC2;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC2;Elegoo TPU 95A @ECC2;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @ECC2;Elegoo PLA Galaxy @ECC2;Elegoo PLA Marble @ECC2;Elegoo PLA Sparkle @ECC2;Elegoo PLA Wood @ECC2;Elegoo Rapid TPU 95A @ECC2;Elegoo ABS @0.2 nozzle;Elegoo ABS @ECC2;Elegoo PAHT-CF @ECC2;Elegoo PC @0.2 nozzle;Elegoo PC @ECC2;Elegoo PC-FR @0.2 nozzle;Elegoo PC-FR @ECC2;Elegoo PETG-CF @ECC2;Elegoo PETG-GF @ECC2;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @ECC2;Elegoo ASA-CF @ECC2;Elegoo PET-CF @ECC2;Elegoo PETG HF @ECC2;Elegoo PLA Glow @ECC2;Elegoo PLA Translucent2 @ECC2"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,13 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "EN104",
|
||||
"name": "Elegoo Neptune 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"inherits": "Elegoo Neptune 2 0.4 nozzle",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
@@ -16,99 +17,5 @@
|
||||
"210x210",
|
||||
"0x210"
|
||||
],
|
||||
"printable_height": "200",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"printable_height": "200"
|
||||
}
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN106",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo Neptune 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN108",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo Neptune 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -1,63 +1,63 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "EN204",
|
||||
"name": "Elegoo Neptune 2 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 2",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune2",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
"235x0",
|
||||
"235x235",
|
||||
"0x235"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
@@ -80,12 +80,11 @@
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
@@ -93,7 +92,7 @@
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
"5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
@@ -106,13 +105,11 @@
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"machine_pause_gcode": "",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;M413 S0 ; disable Power Loss Recovery\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\n;\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.5-50} Y0.5 F6000\nG1 Z0.4 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X{print_bed_max[0]*0.5+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.5+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0\n",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 2 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN206",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 2",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo Neptune 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 2 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN208",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 2",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo Neptune 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 2",
|
||||
"model_id": "Elegoo-Neptune-2",
|
||||
"nozzle_diameter": "0.4",
|
||||
"model_id": "Elegoo-N2",
|
||||
"nozzle_diameter": "0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune2_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune2_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN2 Series;Elegoo PETG @0.2 nozzle;Elegoo PETG @EN2 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN2 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN2 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN2 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN2 Series;Elegoo PLA-CF @EN2 Series;Elegoo PLA @EN2 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN2 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN2 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN2 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN2 Series;Elegoo PLA Galaxy @EN2 Series;Elegoo PLA Marble @EN2 Series;Elegoo PLA Sparkle @EN2 Series;Elegoo PLA Wood @EN2 Series;Elegoo Rapid TPU 95A @EN2 Series;Elegoo PETG-CF @EN2 Series;Elegoo PETG-GF @EN2 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN2 Series"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,13 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "EN2D04",
|
||||
"name": "Elegoo Neptune 2D 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"inherits": "Elegoo Neptune 2 0.4 nozzle",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 2D",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune2D",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle",
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
@@ -21,52 +22,51 @@
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
"235x0",
|
||||
"235x235",
|
||||
"0x235"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
@@ -85,14 +85,13 @@
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32",
|
||||
"0.32"
|
||||
"0.28",
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08",
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2"
|
||||
@@ -118,14 +117,11 @@
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"machine_start_gcode": "T[initial_tool] ; set active extruder\nM413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\nT[initial_tool] ; set active extruder\n;M413 S0 ; disable Power Loss Recovery\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nG90 \nM83 ; extruder relative mode\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\nM420 S1 ; enable mesh - remove ; at beginning of line to enable\n;\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.5-50} Y0.5 F6000\nG1 Z0.4 F300\n;\nG92 E0 ; reset extruder\nG1 E90 F600 ; load filament\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\n;\nG1 X{print_bed_max[0]*0.5+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.5+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0\n;",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n;If prime tower is not enabled, perform the following refuelling G-Code.\n{if enable_prime_tower != true}G1 E-80 F2000 ; unload filament {endif}\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"change_filament_gcode": ";If prime tower is not enabled, perform the following refuelling G-Code.\n{if enable_prime_tower != true} \nM83\nG92 E0\nG1 E-5 Z{layer_z+0.4} F1200\nG1 E-85 F1200\nT[next_extruder]\nG93 E0\nG1 E90 F1200\n;\n{endif}",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 2D 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 2D 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN2D06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 2D",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo Neptune 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 2D 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 2D 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN2D08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 2D",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo Neptune 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 2D",
|
||||
"model_id": "Elegoo-Neptune-2D",
|
||||
"nozzle_diameter": "0.4",
|
||||
"model_id": "Elegoo-N2D",
|
||||
"nozzle_diameter": "0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune2d_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune2d_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN2 Series;Elegoo PETG @0.2 nozzle;Elegoo PETG @EN2 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN2 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN2 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN2 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN2 Series;Elegoo PLA-CF @EN2 Series;Elegoo PLA @EN2 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN2 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN2 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN2 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN2 Series;Elegoo PLA Galaxy @EN2 Series;Elegoo PLA Marble @EN2 Series;Elegoo PLA Sparkle @EN2 Series;Elegoo PLA Wood @EN2 Series;Elegoo Rapid TPU 95A @EN2 Series;Elegoo PETG-CF @EN2 Series;Elegoo PETG-GF @EN2 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN2 Series"
|
||||
}
|
||||
|
||||
@@ -1,114 +1,24 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "EN2S04",
|
||||
"name": "Elegoo Neptune 2S 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 2S",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune2S",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
"235x0",
|
||||
"235x235",
|
||||
"0x235"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_start_gcode": ";;===== date: 20250227 =====================\n;M413 S0 ; disable Power Loss Recovery\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\n;\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.5-50} Y0.5 F6000\nG1 Z0.4 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X{print_bed_max[0]*0.5+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.5+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0\n",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 2S 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 2S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN2S06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 2S",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo Neptune 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 2S 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 2S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN2S08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 2S",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo Neptune 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 2S",
|
||||
"model_id": "Elegoo-Neptune-2S",
|
||||
"nozzle_diameter": "0.4",
|
||||
"model_id": "Elegoo-N2S",
|
||||
"nozzle_diameter": "0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune2s_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune2s_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN2 Series;Elegoo PETG @0.2 nozzle;Elegoo PETG @EN2 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN2 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN2 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN2 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN2 Series;Elegoo PLA-CF @EN2 Series;Elegoo PLA @EN2 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN2 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN2 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN2 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN2 Series;Elegoo PLA Galaxy @EN2 Series;Elegoo PLA Marble @EN2 Series;Elegoo PLA Sparkle @EN2 Series;Elegoo PLA Wood @EN2 Series;Elegoo Rapid TPU 95A @EN2 Series;Elegoo PETG-CF @EN2 Series;Elegoo PETG-GF @EN2 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN2 Series"
|
||||
}
|
||||
|
||||
@@ -1,111 +1,21 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "EN304",
|
||||
"name": "Elegoo Neptune 3 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"inherits": "Elegoo Neptune 2 0.4 nozzle",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 3",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
"235x0",
|
||||
"235x235",
|
||||
"0x235"
|
||||
],
|
||||
"printable_height": "280",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"printable_height": "280"
|
||||
}
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN306",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo Neptune 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN308",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo Neptune 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 3",
|
||||
"model_id": "Elegoo-Neptune-3",
|
||||
"nozzle_diameter": "0.4",
|
||||
"model_id": "Elegoo-N3",
|
||||
"nozzle_diameter": "0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune3_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune3_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN2 Series;Elegoo PETG @0.2 nozzle;Elegoo PETG @EN2 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN2 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN2 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN2 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN2 Series;Elegoo PLA-CF @EN2 Series;Elegoo PLA @EN2 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN2 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN2 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN2 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN2 Series;Elegoo PLA Galaxy @EN2 Series;Elegoo PLA Marble @EN2 Series;Elegoo PLA Sparkle @EN2 Series;Elegoo PLA Wood @EN2 Series;Elegoo Rapid TPU 95A @EN2 Series;Elegoo PETG-CF @EN2 Series;Elegoo PETG-GF @EN2 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN2 Series"
|
||||
}
|
||||
|
||||
@@ -1,114 +1,24 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "ENX04",
|
||||
"name": "Elegoo Neptune X 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune X",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo NeptuneX",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
"235x0",
|
||||
"235x235",
|
||||
"0x235"
|
||||
],
|
||||
"printable_height": "300",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_start_gcode": ";;===== date: 20250227 =====================\n;M413 S0 ; disable Power Loss Recovery\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\n;\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.5-50} Y0.5 F6000\nG1 Z0.4 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X{print_bed_max[0]*0.5+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.5+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0\n",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune X 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune X 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ENX06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune X",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo Neptune 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune X 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune X 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ENX08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune X",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN2 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo Neptune 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune X",
|
||||
"model_id": "Elegoo-Neptune-X",
|
||||
"nozzle_diameter": "0.4",
|
||||
"model_id": "Elegoo-NX",
|
||||
"nozzle_diameter": "0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptunex_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptunex_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN2 Series;Elegoo PETG @0.2 nozzle;Elegoo PETG @EN2 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN2 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN2 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN2 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN2 Series;Elegoo PLA-CF @EN2 Series;Elegoo PLA @EN2 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN2 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN2 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN2 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN2 Series;Elegoo PLA Galaxy @EN2 Series;Elegoo PLA Marble @EN2 Series;Elegoo PLA Sparkle @EN2 Series;Elegoo PLA Wood @EN2 Series;Elegoo Rapid TPU 95A @EN2 Series;Elegoo PETG-CF @EN2 Series;Elegoo PETG-GF @EN2 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN2 Series"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune",
|
||||
"model_id": "Elegoo-Neptune",
|
||||
"nozzle_diameter": "0.4",
|
||||
"model_id": "Elegoo-N1",
|
||||
"nozzle_diameter": "0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN2 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN2 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN2 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN2 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN2 Series;Elegoo PLA-CF @EN2 Series;Elegoo PLA @EN2 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN2 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN2 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN2 Series"
|
||||
}
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Max 0.2 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Max02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Max",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo N3Max 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
@@ -1,114 +1,45 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "EN3MAX04",
|
||||
"name": "Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"inherits": "Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 3 Max",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Max",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo N3Max 0.4 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
"425x0",
|
||||
"425x425",
|
||||
"0x425"
|
||||
],
|
||||
"printable_height": "500",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"retract_lift_below": [
|
||||
"499"
|
||||
],
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
"700",
|
||||
"700"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
"700",
|
||||
"700"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
"700",
|
||||
"700"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
"700",
|
||||
"700"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"700",
|
||||
"700"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Max 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Max06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Max",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN3 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo N3Max 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.5"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Max 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Max08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Max",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN3 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo N3Max 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Max 1.0 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Max10",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Max",
|
||||
"printer_variant": "1.0",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN3 Series"
|
||||
],
|
||||
"default_print_profile": "0.50mm Standard @Elegoo N3Max 1.0 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"2.0"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.7"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3.5"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 3 Max",
|
||||
"model_id": "Elegoo-Neptune-3-Max",
|
||||
"nozzle_diameter": "0.4",
|
||||
"model_id": "Elegoo-N3Max",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8;1.0",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune3max_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune3max_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN3 Series;Elegoo PETG @0.2 nozzle;Elegoo PETG @EN3 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN3 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN3 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN3 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN3 Series;Elegoo PLA-CF @EN3 Series;Elegoo PLA @EN3 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN3 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN3 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN3 Series;Elegoo TPU 95A @EN3 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN3 Series;Elegoo PLA Galaxy @EN3 Series;Elegoo PLA Marble @EN3 Series;Elegoo PLA Sparkle @EN3 Series;Elegoo PLA Wood @EN3 Series;Elegoo Rapid TPU 95A @EN3 Series;Elegoo PETG-CF @EN3 Series;Elegoo PETG-GF @EN3 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN3 Series"
|
||||
}
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Plus02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Plus",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo N3Plus 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
@@ -1,114 +1,24 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "EN3PLUS04",
|
||||
"name": "Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"inherits": "Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 3 Plus",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Plus",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
"325x0",
|
||||
"325x325",
|
||||
"0x325"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"retract_lift_below": [
|
||||
"399"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Plus 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Plus06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Plus",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN3 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo N3Plus 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Plus 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Plus08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Plus",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN3 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo N3Plus 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Plus 1.0 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Plus10",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Plus",
|
||||
"printer_variant": "1.0",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN3 Series"
|
||||
],
|
||||
"default_print_profile": "0.50mm Standard @Elegoo N3Plus 1.0 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"2.0"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.7"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3.5"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 3 Plus",
|
||||
"model_id": "Elegoo-Neptune-3-Plus",
|
||||
"nozzle_diameter": "0.4",
|
||||
"model_id": "Elegoo-N3Plus",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8;1.0",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune3plus_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune3plus_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN3 Series;Elegoo PETG @0.2 nozzle;Elegoo PETG @EN3 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN3 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN3 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN3 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN3 Series;Elegoo PLA-CF @EN3 Series;Elegoo PLA @EN3 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN3 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN3 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN3 Series;Elegoo TPU 95A @EN3 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN3 Series;Elegoo PLA Galaxy @EN3 Series;Elegoo PLA Marble @EN3 Series;Elegoo PLA Sparkle @EN3 Series;Elegoo PLA Wood @EN3 Series;Elegoo Rapid TPU 95A @EN3 Series;Elegoo PETG-CF @EN3 Series;Elegoo PETG-GF @EN3 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN3 Series"
|
||||
}
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Pro02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Pro",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo N3Pro 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
@@ -1,43 +1,46 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "EN3PRO04",
|
||||
"name": "Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 3 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
"230x0",
|
||||
"230x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "280",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"retract_lift_below": [
|
||||
"279"
|
||||
],
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
@@ -48,12 +51,12 @@
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
@@ -76,12 +79,11 @@
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
@@ -89,26 +91,30 @@
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
"1.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
"30"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
"30"
|
||||
],
|
||||
"thumbnails": [
|
||||
"200x200/COLPIC/#30394F",
|
||||
"160x160/COLPIC/#30394F",
|
||||
"160x160/PNG"
|
||||
],
|
||||
"thumbnails_format": "COLPIC",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"machine_pause_gcode": "M600",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
"Elegoo PLA @EN3 Series"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\nM400 ; wait for buffer to clear\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.5-50} Y0.5 F6000\nG1 Z0.4 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X{print_bed_max[0]*0.5+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.5+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG90 ;Absolute positionning\nM83 ; extruder relative mode\nG1 X10 Y{print_bed_max[1]*0.8} Z{min(max_layer_z+50, printable_height)} E-5 F{travel_speed*60} ; Move print head up\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Pro 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Pro06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Pro",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN3 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo N3Pro 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Pro 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Pro08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Pro",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN3 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo N3Pro 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Pro 1.0 nozzle",
|
||||
"inherits": "Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN3Pro10",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 3 Pro",
|
||||
"printer_variant": "1.0",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN3 Series"
|
||||
],
|
||||
"default_print_profile": "0.50mm Standard @Elegoo N3Pro 1.0 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"2.0"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.7"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3.5"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 3 Pro",
|
||||
"model_id": "Elegoo-Neptune-3-Pro",
|
||||
"nozzle_diameter": "0.4",
|
||||
"model_id": "Elegoo-N3Pro",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8;1.0",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune3pro_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune3pro_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN3 Series;Elegoo PETG @0.2 nozzle;Elegoo PETG @EN3 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN3 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN3 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN3 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN3 Series;Elegoo PLA-CF @EN3 Series;Elegoo PLA @EN3 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN3 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN3 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN3 Series;Elegoo TPU 95A @EN3 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN3 Series;Elegoo PLA Galaxy @EN3 Series;Elegoo PLA Marble @EN3 Series;Elegoo PLA Sparkle @EN3 Series;Elegoo PLA Wood @EN3 Series;Elegoo Rapid TPU 95A @EN3 Series;Elegoo PETG-CF @EN3 Series;Elegoo PETG-GF @EN3 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN3 Series"
|
||||
}
|
||||
|
||||
@@ -1,60 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,60 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,60 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,60 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 0.2 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN402",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo N4 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 (0.2 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,119 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN404",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_3dp_001_common",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo N4 0.4 nozzle",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"230x0",
|
||||
"230x230",
|
||||
"0x230"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"-1x-2"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"retract_lift_below": [
|
||||
"264"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_structure": "i3",
|
||||
"cooling_tube_length": "5",
|
||||
"enable_filament_ramming": "1",
|
||||
"nozzle_volume": "90",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M600",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_technology": "FFF",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\nM400 ; wait for buffer to clear\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.5-50} Y0.5 F6000\nG1 Z0.4 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X{print_bed_max[0]*0.5+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.5+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG90 ;Absolute positionning\nM83 ; extruder relative mode\nG92 E0 ; zero the extruder\nG1 E-1.5 F1800\nG2 I1 J0 Z{max_layer_z+0.5} F3000 ; lower z a little\nG90\nG1 X10 Y{print_bed_max[1]*0.8} Z{min(max_layer_z+50, printable_height)} E-5 F{travel_speed*60} ; Move print head up\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"thumbnails": [
|
||||
"320x320/COLPIC/#30394F",
|
||||
"160x160/COLPIC/#30394F",
|
||||
"160x160/PNG"
|
||||
],
|
||||
"thumbnails_format": "COLPIC",
|
||||
"renamed_from": "Elegoo Neptune 4 (0.4 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN406",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo N4 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 (0.6 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN408",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo N4 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 (0.8 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 1.0 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN410",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"printer_variant": "1.0",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.50mm Standard @Elegoo N4 1.0 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"2.0"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.7"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3.5"
|
||||
]
|
||||
}
|
||||
@@ -1,124 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,124 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,124 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,124 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.20"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4MAX02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo N4Max 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Max (0.2 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,85 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4MAX04",
|
||||
"instantiation": "true",
|
||||
"inherits": "Elegoo Neptune 4 0.4 nozzle",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo N4Max 0.4 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"426x0",
|
||||
"426x426",
|
||||
"0x426"
|
||||
],
|
||||
"bed_texture_area": [
|
||||
"0x-12.3",
|
||||
"426x-12.3",
|
||||
"426x423.6",
|
||||
"0x423.6"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"retract_lift_below": [
|
||||
"479"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"-1.5x2"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"cooling_tube_length": "5",
|
||||
"enable_filament_ramming": "1",
|
||||
"nozzle_volume": "110",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Max (0.4 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4MAX06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo N4Max 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Max (0.6 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4MAX08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo N4Max 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Max (0.8 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max 1.0 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4MAX10",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_variant": "1.0",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.50mm Standard @Elegoo N4Max 1.0 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"2.0"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.7"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3.5"
|
||||
]
|
||||
}
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4 Max",
|
||||
"model_id": "Elegoo-Neptune-4-Max",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"model_id": "Elegoo-N4Max",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8;1.0",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4max_buildplate_model.stl",
|
||||
@@ -11,5 +11,5 @@
|
||||
"0x0"
|
||||
],
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN4 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN4 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN4 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN4 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN4 Series;Elegoo PLA-CF @EN4 Series;Elegoo PLA @EN4 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN4 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN4 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN4 Series;Elegoo TPU 95A @EN4 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN4 Series;Elegoo PLA Galaxy @EN4 Series;Elegoo PLA Marble @EN4 Series;Elegoo PLA Sparkle @EN4 Series;Elegoo PLA Wood @EN4 Series;Elegoo Rapid TPU 95A @EN4 Series;Elegoo PETG-CF @EN4 Series;Elegoo PETG-GF @EN4 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN4 Series"
|
||||
}
|
||||
|
||||
@@ -1,169 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.2 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,169 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.4 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,169 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"25",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,169 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.8 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"25",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.20"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4PLUS02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo N4Plus 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Plus (0.2 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,85 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4PLUS04",
|
||||
"instantiation": "true",
|
||||
"inherits": "Elegoo Neptune 4 0.4 nozzle",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"325x0",
|
||||
"325x325",
|
||||
"0x325"
|
||||
],
|
||||
"bed_texture_area": [
|
||||
"0x-12.3",
|
||||
"325x-12.3",
|
||||
"325x321.5",
|
||||
"0x321.5"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"retract_lift_below": [
|
||||
"384"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"-2x-0"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"cooling_tube_length": "5",
|
||||
"enable_filament_ramming": "1",
|
||||
"nozzle_volume": "110",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Plus (0.4 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4PLUS06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo N4Plus 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Plus (0.6 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4PLUS08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo N4Plus 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Plus (0.8 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus 1.0 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4PLUS10",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_variant": "1.0",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.50mm Standard @Elegoo N4Plus 1.0 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"2.0"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.7"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3.5"
|
||||
]
|
||||
}
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4 Plus",
|
||||
"model_id": "Elegoo-Neptune-4-Plus",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"model_id": "Elegoo-N4Plus",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8;1.0",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4plus_buildplate_model.stl",
|
||||
@@ -11,5 +11,5 @@
|
||||
"0x0"
|
||||
],
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN4 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN4 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN4 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN4 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN4 Series;Elegoo PLA-CF @EN4 Series;Elegoo PLA @EN4 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN4 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN4 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN4 Series;Elegoo TPU 95A @EN4 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN4 Series;Elegoo PLA Galaxy @EN4 Series;Elegoo PLA Marble @EN4 Series;Elegoo PLA Sparkle @EN4 Series;Elegoo PLA Wood @EN4 Series;Elegoo Rapid TPU 95A @EN4 Series;Elegoo PETG-CF @EN4 Series;Elegoo PETG-GF @EN4 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN4 Series"
|
||||
}
|
||||
|
||||
@@ -1,60 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,60 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,60 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,120 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"gcode_flavor": "klipper",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4PRO02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo N4Pro 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Pro (0.2 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4PRO04",
|
||||
"instantiation": "true",
|
||||
"inherits": "Elegoo Neptune 4 0.4 nozzle",
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"230x0",
|
||||
"230x230",
|
||||
"0x230"
|
||||
],
|
||||
"bed_texture_area": [
|
||||
"0x-12.5",
|
||||
"230x-12.5",
|
||||
"230x0",
|
||||
"230x227.5"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"retract_lift_below": [
|
||||
"264"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"-2.5x-3.5"
|
||||
],
|
||||
"before_layer_change_gcode": ";[layer_z]\nG92 E0\n{if (first_layer_print_min[0]) > 57.5 && (first_layer_print_min[1]) > 57.5 &&(first_layer_print_max[0]) < 177.5 && (first_layer_print_max[1]) < 177.5 && layer_num < 4 && bed_temperature_initial_layer_single < 71}\nM141 S0\n{endif}",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Pro (0.4 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro 0.6 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4PRO06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo N4Pro 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Pro (0.6 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,36 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro 0.8 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4PRO08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo N4Pro 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
],
|
||||
"renamed_from": "Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro 1.0 nozzle",
|
||||
"inherits": "Elegoo Neptune 4 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EN4PRO10",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"printer_variant": "1.0",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EN4 Series"
|
||||
],
|
||||
"default_print_profile": "0.50mm Standard @Elegoo N4Pro 1.0 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"2.0"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.7"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3.5"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4 Pro",
|
||||
"model_id": "Elegoo-Neptune-4-Pro",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"model_id": "Elegoo-N4Pro",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8;1.0",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4pro_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune4pro_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN4 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN4 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN4 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN4 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN4 Series;Elegoo PLA-CF @EN4 Series;Elegoo PLA @EN4 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN4 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN4 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN4 Series;Elegoo TPU 95A @EN4 Series;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @EN4 Series;Elegoo PLA Galaxy @EN4 Series;Elegoo PLA Marble @EN4 Series;Elegoo PLA Sparkle @EN4 Series;Elegoo PLA Wood @EN4 Series;Elegoo Rapid TPU 95A @EN4 Series;Elegoo PETG-CF @EN4 Series;Elegoo PETG-GF @EN4 Series;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @EN4 Series"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4",
|
||||
"model_id": "Elegoo-Neptune-4",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"model_id": "Elegoo-N4",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8;1.0",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune4_buildplate_texture.svg",
|
||||
"bed_model": "elegoo_neptune_pro_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EN4 Series;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EN4 Series;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EN4 Series;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EN4 Series;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EN4 Series;Elegoo PLA-CF @EN4 Series;Elegoo PLA @EN4 Series;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EN4 Series;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EN4 Series;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EN4 Series;Elegoo TPU 95A @EN4 Series"
|
||||
}
|
||||
|
||||
@@ -1,145 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_neptune_4_common",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "280",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M25 ;pause print",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": "",
|
||||
"layer_change_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"thumbnails": [
|
||||
"320x320/PNG",
|
||||
"32x32/COLPIC",
|
||||
"160x160/COLPIC"
|
||||
],
|
||||
"thumbnails_format": "PNG"
|
||||
}
|
||||
File diff suppressed because one or more lines are too long
@@ -28,5 +28,6 @@
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
],
|
||||
"upward_compatible_machine": []
|
||||
}
|
||||
|
||||
@@ -28,5 +28,6 @@
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
]
|
||||
],
|
||||
"upward_compatible_machine": []
|
||||
}
|
||||
|
||||
@@ -28,5 +28,6 @@
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
]
|
||||
],
|
||||
"upward_compatible_machine": []
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo OrangeStorm Giga",
|
||||
"model_id": "Elegoo-OrangeStorm-Giga",
|
||||
"nozzle_diameter": "0.4;0.6;0.8;1.0",
|
||||
"model_id": "Elegoo-OS-Giga",
|
||||
"nozzle_diameter": "0.6;0.4;0.8;1.0",
|
||||
"bed_model": "elegoo_orangestorm_giga_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_orangestorm_giga_buildplate_texture.svg",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo PLA @Elegoo Giga;Elegoo PETG PRO @Elegoo Giga;Elegoo PLA Silk"
|
||||
"default_materials": "Elegoo PLA @Elegoo Giga;Elegoo PETG PRO @Elegoo Giga;Elegoo ASA @Elegoo Giga;Elegoo PLA Matte @Elegoo Giga;Elegoo Rapid PETG @Elegoo Giga;Elegoo Rapid PLA+ @Elegoo Giga;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @Elegoo Giga;Elegoo PLA Galaxy @Elegoo Giga;Elegoo PLA Marble @Elegoo Giga;Elegoo PLA Sparkle @Elegoo Giga;Elegoo PLA Wood @Elegoo Giga;Elegoo Rapid TPU 95A @Elegoo Giga;Elegoo PETG-CF @Elegoo Giga;Elegoo PETG-GF @Elegoo Giga;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @Elegoo Giga"
|
||||
}
|
||||
|
||||
@@ -21,6 +21,7 @@
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
|
||||
@@ -1,69 +1,91 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_elegoo_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_machine_common",
|
||||
"gcode_flavor": "marlin",
|
||||
"printer_technology": "FFF",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x235",
|
||||
"0x235"
|
||||
],
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"200",
|
||||
"200"
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
@@ -73,28 +95,27 @@
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
"printable_height": "250",
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "280",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_max_radius": "68",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_volume": "90",
|
||||
"best_object_pos": "0.5x0.5",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
"0.8"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
"0%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.2"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
@@ -104,36 +125,30 @@
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
"60"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"thumbnails": [
|
||||
"320x320",
|
||||
"160x160"
|
||||
],
|
||||
"thumbnails_format": "PNG",
|
||||
"nozzle_type": "brass",
|
||||
"machine_end_gcode": "G90 ;Absolute positionning\nM83 ; extruder relative mode\nG1 X10 Y{print_bed_max[1]*0.8} Z{min(max_layer_z+100, printable_height)} E-8 F{travel_speed*60} ; Move print head up\nG1 Z{min(max_layer_z+100, printable_height-2)} F600\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM84 ;Disable all steppers",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M25 ;pause print",
|
||||
"machine_pause_gcode": "M600",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": "",
|
||||
"layer_change_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
"machine_start_gcode": "\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0\n",
|
||||
"layer_change_gcode": ";LAYER:{layer_num+1}\n",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -3,7 +3,13 @@
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"support_chamber_temp_control": "0",
|
||||
"printer_technology": "FFF",
|
||||
"printer_notes": "",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
@@ -19,19 +25,19 @@
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500"
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500"
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500"
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
@@ -55,7 +61,7 @@
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
@@ -64,31 +70,28 @@
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"printer_settings_id": "Elegoo",
|
||||
"disable_m73": "0",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
@@ -103,16 +106,25 @@
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"35"
|
||||
"60"
|
||||
],
|
||||
"cooling_tube_retraction": "90",
|
||||
"parking_pos_retraction": "90",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"support_air_filtration": "0",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "",
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"default_filament_profile": [],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"layer_change_gcode": ";LAYER:{layer_num+1}\n",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": ""
|
||||
"machine_end_gcode": "",
|
||||
"change_filament_gcode": "",
|
||||
"purge_in_prime_tower": "0",
|
||||
"manual_filament_change": "1",
|
||||
"enable_filament_ramming": "0"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user