mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-16 05:27:50 +00:00
Sync Elegoo profiles (#13790)
* Sync Elegoo profiles from ElegooSlicer
Update vendor Elegoo.json, filament/machine/process trees, and OrcaFilamentLibrary
Elegoo entries. Align machine default material names with existing filament preset names.
* feat: expose filament_name for G-code export filename format
Derive from filament_settings_id for the first active extruder and strip the suffix after @, matching ElegooSlicer so filename_format can use {filament_name}.
* chore: reorder Elegoo entries in OrcaFilamentLibrary
Group Elegoo @base profiles and bump library version to 02.03.02.62.
* sync OrcaFilamentLibrary.json with Elegoo filament profiles
* fix: clean up Elegoo process renamed_from for profile validation
Add single renamed_from only where preset names changed from legacy Orca
names; remove duplicate Rapid @System library entries that conflicted with
ECC2 vendor presets.
* fix(profiles): add missing Elegoo renamed_from for profile validation
CI custom-preset tests still inherit legacy Orca preset names that no
longer exist after the Elegoo bundle update. Add renamed_from on process,
Neptune 4 machines, OrcaFilamentLibrary filaments, and Giga profiles so
inherits resolve again, without changing print parameters.
This commit is contained in:
wujie
@@ -12,7 +12,10 @@
|
||||
"18"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
@@ -21,6 +24,7 @@
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -6,7 +6,10 @@
|
||||
"setting_id": "EASAECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
@@ -15,6 +18,7 @@
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -0,0 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA-CF @ECC2",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASACFECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -21,7 +21,7 @@
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
"6"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
@@ -57,12 +57,16 @@
|
||||
"100"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -6,7 +6,10 @@
|
||||
"setting_id": "EPCECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
@@ -48,6 +51,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -6,7 +6,10 @@
|
||||
"setting_id": "EPCFRECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.05"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
@@ -33,6 +36,7 @@
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PET-CF @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETCFECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_type": [
|
||||
"PET-CF"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -6,7 +6,10 @@
|
||||
"setting_id": "EPETGECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.05"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
@@ -21,6 +24,7 @@
|
||||
"11"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -0,0 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG HF @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGHFECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -6,12 +6,19 @@
|
||||
"setting_id": "EPETGPROECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -6,7 +6,10 @@
|
||||
"setting_id": "EPETGTRANSECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
@@ -21,6 +24,7 @@
|
||||
"255"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -6,7 +6,13 @@
|
||||
"setting_id": "EPETGCFECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
@@ -24,7 +30,7 @@
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
@@ -36,6 +42,7 @@
|
||||
"6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -6,7 +6,10 @@
|
||||
"setting_id": "EPETGFECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
@@ -24,7 +27,7 @@
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
@@ -36,6 +39,7 @@
|
||||
"6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -15,7 +15,10 @@
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
@@ -24,6 +27,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -18,7 +18,10 @@
|
||||
"21"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
@@ -27,6 +30,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -21,7 +21,10 @@
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
@@ -30,6 +33,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -0,0 +1,41 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Glow @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAGLOWECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -21,7 +21,10 @@
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
@@ -30,6 +33,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -33,10 +33,10 @@
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
@@ -45,6 +45,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -8,8 +8,14 @@
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.032"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
@@ -18,6 +24,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -29,8 +29,11 @@
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.04"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
@@ -45,6 +48,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -21,7 +21,13 @@
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
@@ -30,6 +36,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -0,0 +1,44 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Translucent2 @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLATRA2ECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -9,7 +9,7 @@
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
@@ -21,7 +21,10 @@
|
||||
"200"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
@@ -30,6 +33,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -9,7 +9,10 @@
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
@@ -18,6 +21,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
@@ -33,7 +33,10 @@
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.032"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
@@ -54,6 +57,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -7,7 +7,13 @@
|
||||
"setting_id": "ERPETGECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.052"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
@@ -28,6 +34,7 @@
|
||||
"250"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -31,7 +31,10 @@
|
||||
"60"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.04"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
@@ -43,6 +46,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -7,7 +7,10 @@
|
||||
"setting_id": "ERTPU95AECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
@@ -22,6 +25,7 @@
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
@@ -9,9 +9,13 @@
|
||||
"3.2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
"0.1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
|
||||
Reference in New Issue
Block a user