mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-16 05:27:50 +00:00
Sync Elegoo profiles (#13790)
* Sync Elegoo profiles from ElegooSlicer
Update vendor Elegoo.json, filament/machine/process trees, and OrcaFilamentLibrary
Elegoo entries. Align machine default material names with existing filament preset names.
* feat: expose filament_name for G-code export filename format
Derive from filament_settings_id for the first active extruder and strip the suffix after @, matching ElegooSlicer so filename_format can use {filament_name}.
* chore: reorder Elegoo entries in OrcaFilamentLibrary
Group Elegoo @base profiles and bump library version to 02.03.02.62.
* sync OrcaFilamentLibrary.json with Elegoo filament profiles
* fix: clean up Elegoo process renamed_from for profile validation
Add single renamed_from only where preset names changed from legacy Orca
names; remove duplicate Rapid @System library entries that conflicted with
ECC2 vendor presets.
* fix(profiles): add missing Elegoo renamed_from for profile validation
CI custom-preset tests still inherit legacy Orca preset names that no
longer exist after the Elegoo bundle update. Add renamed_from on process,
Neptune 4 machines, OrcaFilamentLibrary filaments, and Giga profiles so
inherits resolve again, without changing print parameters.
This commit is contained in:
wujie
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ABS @ECC",
|
||||
"inherits": "Elegoo ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "EABSECC",
|
||||
"instantiation": "true",
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -15,6 +15,7 @@
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
@@ -0,0 +1,71 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PAHT-CF @ECC",
|
||||
"inherits": "Elegoo PAHT @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPAHTCFECC",
|
||||
"instantiation": "true",
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,56 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC @ECC",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPCECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,41 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC-FR @ECC",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPCFRSECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG @ECC",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,14 +1,18 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @ECC",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGPROECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG Translucent @ECC",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGTRANSECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,44 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG-CF @ECC",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGCFECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,44 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG-GF @ECC",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGFECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -24,6 +24,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
@@ -0,0 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Basic @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLABASICECC",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Galaxy @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAGALAXYECC",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Marble @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAMARBLEECC",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @ECC",
|
||||
"inherits": "Elegoo PLA Matte @base",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAMECC",
|
||||
"instantiation": "true",
|
||||
@@ -35,10 +35,14 @@
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
@@ -18,6 +18,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @ECC",
|
||||
"inherits": "Elegoo PLA Silk @base",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLASECC",
|
||||
"instantiation": "true",
|
||||
@@ -32,10 +32,20 @@
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
@@ -0,0 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Sparkle @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLASPARKLEECC",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Wood @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAWOODECC",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -18,6 +18,7 @@
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF @ECC",
|
||||
"inherits": "Elegoo PLA-CF @base",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLACFECC",
|
||||
"instantiation": "true",
|
||||
@@ -35,10 +35,26 @@
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
@@ -2,14 +2,33 @@
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @ECC",
|
||||
"renamed_from": "Elegoo RAPID PETG @ECC",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
@@ -2,7 +2,7 @@
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @ECC",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @ECC",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUSECC",
|
||||
"instantiation": "true",
|
||||
@@ -15,9 +15,6 @@
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
@@ -36,10 +33,17 @@
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid TPU 95A @ECC",
|
||||
"renamed_from": "Elegoo RAPID TPU 95A @ECC",
|
||||
"inherits": "Elegoo TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERTPU95AECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @ECC",
|
||||
"inherits": "Elegoo TPU 95A @base",
|
||||
"inherits": "Elegoo TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "ETPU95AECC",
|
||||
"instantiation": "true",
|
||||
@@ -12,6 +12,7 @@
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
|
||||
Reference in New Issue
Block a user