diff --git a/src/slic3r/GUI/DeviceManager.cpp b/src/slic3r/GUI/DeviceManager.cpp
index cb29fbe11a..8a576cfc77 100644
--- a/src/slic3r/GUI/DeviceManager.cpp
+++ b/src/slic3r/GUI/DeviceManager.cpp
@@ -1438,26 +1438,29 @@ int MachineObject::command_upgrade_module(std::string url, std::string module_ty
 
 int MachineObject::command_xyz_abs()
 {
-    return this->publish_gcode("G90 \n");
+    if (!m_agent) return -1;
+    int rtn = m_agent->command_xyz_abs(get_dev_id(), MachineObject::m_sequence_id++, is_lan_mode_printer());
+    if (rtn == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED || rtn == ORCA_NETWORK_ERR_CAP_NOT_AVAILABLE)
+        show_unsupported_dlg(rtn);
+    return rtn;
 }
 
 int MachineObject::command_auto_leveling()
 {
-    return this->publish_gcode("G29 \n");
+    if (!m_agent) return -1;
+    int rtn = m_agent->command_auto_leveling(get_dev_id(), MachineObject::m_sequence_id++, is_lan_mode_printer());
+    if (rtn == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED || rtn == ORCA_NETWORK_ERR_CAP_NOT_AVAILABLE)
+        show_unsupported_dlg(rtn);
+    return rtn;
 }
 
 int MachineObject::command_go_home()
 {
-    if (m_support_mqtt_homing)
-    {
-        json j;
-        j["print"]["command"] = "back_to_center";
-        j["print"]["sequence_id"] = std::to_string(MachineObject::m_sequence_id++);
-        return this->publish_json(j);
-    }
-
-    // gcode command
-    return this->is_in_printing() ? this->publish_gcode("G28 X\n") : this->publish_gcode("G28 \n");
+    if (!m_agent) return -1;
+    int rtn = m_agent->command_go_home(get_dev_id(), this->is_in_printing(), m_support_mqtt_homing, MachineObject::m_sequence_id++, is_lan_mode_printer());
+    if (rtn == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED || rtn == ORCA_NETWORK_ERR_CAP_NOT_AVAILABLE)
+        show_unsupported_dlg(rtn);
+    return rtn;
 }
 
 int MachineObject::command_task_partskip(std::vector<int> part_ids)
@@ -1579,23 +1582,20 @@ int MachineObject::command_stop_buzzer()
 
 int MachineObject::command_set_bed(int temp)
 {
-    if (m_support_mqtt_bet_ctrl)
-    {
-        json j;
-        j["print"]["command"] = "set_bed_temp";
-        j["print"]["temp"] = temp;
-        j["print"]["sequence_id"] = std::to_string(MachineObject::m_sequence_id++);
-        return this->publish_json(j);
-    }
-
-    std::string gcode_str = (boost::format("M140 S%1%\n") % temp).str();
-    return this->publish_gcode(gcode_str);
+    if (!m_agent) return -1;
+    int rtn = m_agent->command_set_bed(get_dev_id(), temp, m_support_mqtt_bet_ctrl, MachineObject::m_sequence_id++, is_lan_mode_printer());
+    if (rtn == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED || rtn == ORCA_NETWORK_ERR_CAP_NOT_AVAILABLE)
+        show_unsupported_dlg(rtn);
+    return rtn;
 }
 
 int MachineObject::command_set_nozzle(int temp)
 {
-    std::string gcode_str = (boost::format("M104 S%1%\n") % temp).str();
-    return this->publish_gcode(gcode_str);
+    if (!m_agent) return -1;
+    int rtn = m_agent->command_set_nozzle(get_dev_id(), temp, MachineObject::m_sequence_id++, is_lan_mode_printer());
+    if (rtn == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED || rtn == ORCA_NETWORK_ERR_CAP_NOT_AVAILABLE)
+        show_unsupported_dlg(rtn);
+    return rtn;
 }
 
 int MachineObject::command_set_nozzle_new(int nozzle_id, int temp)
@@ -1925,47 +1925,12 @@ int MachineObject::command_ams_air_print_detect(bool air_print_detect)
 
 int MachineObject::command_axis_control(std::string axis, double unit, double input_val, int speed)
 {
-    if (m_support_mqtt_axis_control)
-    {
-        int dir = input_val > 0 ? 1 : -1;
-        // i3-arch printers move the bed for Y/Z, so the on-screen direction is
-        // reversed — same negation the g-code fallback below applies.
-        if (!is_core_xy() && (axis.compare("Y") == 0 || axis.compare("Z") == 0)) {
-            dir = -dir;
-        }
-
-        json j;
-        j["print"]["command"] = "xyz_ctrl";
-        j["print"]["axis"] = axis;
-        j["print"]["dir"] = dir;
-        j["print"]["mode"] = (std::abs(input_val) >= 10) ? 1 : 0;
-        j["print"]["sequence_id"] = std::to_string(MachineObject::m_sequence_id++);
-        return this->publish_json(j);
-    }
-
-    double value = input_val;
-    if (!is_core_xy()) {
-        if ( axis.compare("Y") == 0
-            || axis.compare("Z")  == 0) {
-            value = -1.0 * input_val;
-        }
-    }
-
-    char cmd[256];
-    if (axis.compare("X") == 0
-        || axis.compare("Y") == 0
-        || axis.compare("Z") == 0) {
-        sprintf(cmd, "M211 S \nM211 X1 Y1 Z1\nM1002 push_ref_mode\nG91 \nG1 %s%0.1f F%d\nM1002 pop_ref_mode\nM211 R\n", axis.c_str(), value * unit, speed);
-    }
-    else if (axis.compare("E") == 0) {
-        sprintf(cmd, "M83 \nG0 %s%0.1f F%d\n", axis.c_str(), value * unit, speed);
-    }
-    else {
-        return -1;
-    }
-
-
-    return this->publish_gcode(cmd);
+    if (!m_agent) return -1;
+    int rtn = m_agent->command_axis_control(get_dev_id(), axis, unit, input_val, speed, is_core_xy(),
+                                             m_support_mqtt_axis_control, MachineObject::m_sequence_id++, is_lan_mode_printer());
+    if (rtn == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED || rtn == ORCA_NETWORK_ERR_CAP_NOT_AVAILABLE)
+        show_unsupported_dlg(rtn);
+    return rtn;
 }
 
 int MachineObject::command_extruder_control(int nozzle_id, double val)
diff --git a/src/slic3r/Utils/BBLPrinterAgent.cpp b/src/slic3r/Utils/BBLPrinterAgent.cpp
index 9d422552fe..88323e868c 100644
--- a/src/slic3r/Utils/BBLPrinterAgent.cpp
+++ b/src/slic3r/Utils/BBLPrinterAgent.cpp
@@ -5,6 +5,7 @@
 #include <boost/format.hpp>
 #include <boost/log/trivial.hpp>
 #include <nlohmann/json.hpp>
+#include <cmath>
 
 namespace Slic3r {
 
@@ -70,6 +71,104 @@ int BBLPrinterAgent::command_ams_select_tray(std::string dev_id, std::string tra
     return publish(dev_id, j, lan_mode);
 }
 
+int BBLPrinterAgent::command_xyz_abs(std::string dev_id, int sequence_id, bool lan_mode)
+{
+    nlohmann::json j;
+    j["print"]["command"] = "gcode_line";
+    j["print"]["param"] = "G90 \n";
+    j["print"]["sequence_id"] = std::to_string(sequence_id);
+    return publish(dev_id, j, lan_mode);
+}
+
+int BBLPrinterAgent::command_auto_leveling(std::string dev_id, int sequence_id, bool lan_mode)
+{
+    nlohmann::json j;
+    j["print"]["command"] = "gcode_line";
+    j["print"]["param"] = "G29 \n";
+    j["print"]["sequence_id"] = std::to_string(sequence_id);
+    return publish(dev_id, j, lan_mode);
+}
+
+int BBLPrinterAgent::command_go_home(std::string dev_id, bool is_printing, bool supports_mqtt_homing, int sequence_id, bool lan_mode)
+{
+    nlohmann::json j;
+    j["print"]["sequence_id"] = std::to_string(sequence_id);
+    if (supports_mqtt_homing) {
+        j["print"]["command"] = "back_to_center";
+        return publish(dev_id, j, lan_mode);
+    }
+
+    j["print"]["command"] = "gcode_line";
+    j["print"]["param"] = is_printing ? "G28 X\n" : "G28 \n";
+    return publish(dev_id, j, lan_mode);
+}
+
+int BBLPrinterAgent::command_set_bed(std::string dev_id, int temp, bool supports_mqtt_bed_ctrl, int sequence_id, bool lan_mode)
+{
+    nlohmann::json j;
+    j["print"]["sequence_id"] = std::to_string(sequence_id);
+    if (supports_mqtt_bed_ctrl) {
+        j["print"]["command"] = "set_bed_temp";
+        j["print"]["temp"] = temp;
+        return publish(dev_id, j, lan_mode);
+    }
+
+    j["print"]["command"] = "gcode_line";
+    j["print"]["param"] = (boost::format("M140 S%1%\n") % temp).str();
+    return publish(dev_id, j, lan_mode);
+}
+
+int BBLPrinterAgent::command_set_nozzle(std::string dev_id, int temp, int sequence_id, bool lan_mode)
+{
+    nlohmann::json j;
+    j["print"]["command"] = "gcode_line";
+    j["print"]["param"] = (boost::format("M104 S%1%\n") % temp).str();
+    j["print"]["sequence_id"] = std::to_string(sequence_id);
+    return publish(dev_id, j, lan_mode);
+}
+
+int BBLPrinterAgent::command_axis_control(std::string dev_id, std::string axis, double unit, double input_val, int speed,
+                                           bool is_core_xy, bool supports_mqtt_axis_control, int sequence_id, bool lan_mode)
+{
+    nlohmann::json j;
+    j["print"]["sequence_id"] = std::to_string(sequence_id);
+
+    if (supports_mqtt_axis_control) {
+        int dir = input_val > 0 ? 1 : -1;
+        // i3-arch printers move the bed for Y/Z, so the on-screen direction is
+        // reversed -- same negation the g-code fallback below applies.
+        if (!is_core_xy && (axis == "Y" || axis == "Z")) {
+            dir = -dir;
+        }
+
+        j["print"]["command"] = "xyz_ctrl";
+        j["print"]["axis"] = axis;
+        j["print"]["dir"] = dir;
+        j["print"]["mode"] = (std::abs(input_val) >= 10) ? 1 : 0;
+        return publish(dev_id, j, lan_mode);
+    }
+
+    double value = input_val;
+    if (!is_core_xy && (axis == "Y" || axis == "Z")) {
+        value = -1.0 * input_val;
+    }
+
+    std::string value_str = (boost::format("%.1f") % (value * unit)).str();
+    std::string gcode;
+    if (axis == "X" || axis == "Y" || axis == "Z") {
+        gcode = (boost::format("M211 S \nM211 X1 Y1 Z1\nM1002 push_ref_mode\nG91 \nG1 %1%%2% F%3%\nM1002 pop_ref_mode\nM211 R\n")
+                 % axis % value_str % speed).str();
+    } else if (axis == "E") {
+        gcode = (boost::format("M83 \nG0 %1%%2% F%3%\n") % axis % value_str % speed).str();
+    } else {
+        return -1;
+    }
+
+    j["print"]["command"] = "gcode_line";
+    j["print"]["param"] = gcode;
+    return publish(dev_id, j, lan_mode);
+}
+
 int BBLPrinterAgent::publish(const std::string& dev_id, const nlohmann::json& j, bool lan_mode)
 {
     const int rtn = lan_mode ? send_message_to_printer(dev_id, j.dump(), 0, 0) : send_message(dev_id, j.dump(), 0, 0);
diff --git a/src/slic3r/Utils/BBLPrinterAgent.hpp b/src/slic3r/Utils/BBLPrinterAgent.hpp
index a04cd00175..df51c7eb51 100644
--- a/src/slic3r/Utils/BBLPrinterAgent.hpp
+++ b/src/slic3r/Utils/BBLPrinterAgent.hpp
@@ -35,6 +35,13 @@ public:
     int command_ams_refresh_rfid(std::string dev_id, std::string tray_id, int sequence_id, bool lan_mode) override;
     int command_ams_calibrate(std::string dev_id, int ams_id, int sequence_id, bool lan_mode) override;
     int command_ams_select_tray(std::string dev_id, std::string tray_id, int sequence_id, bool lan_mode) override;
+    int command_xyz_abs(std::string dev_id, int sequence_id, bool lan_mode) override;
+    int command_auto_leveling(std::string dev_id, int sequence_id, bool lan_mode) override;
+    int command_go_home(std::string dev_id, bool is_printing, bool supports_mqtt_homing, int sequence_id, bool lan_mode) override;
+    int command_set_bed(std::string dev_id, int temp, bool supports_mqtt_bed_ctrl, int sequence_id, bool lan_mode) override;
+    int command_set_nozzle(std::string dev_id, int temp, int sequence_id, bool lan_mode) override;
+    int command_axis_control(std::string dev_id, std::string axis, double unit, double input_val, int speed,
+                              bool is_core_xy, bool supports_mqtt_axis_control, int sequence_id, bool lan_mode) override;
     int connect_printer(std::string dev_id, std::string dev_ip, std::string username, std::string password, bool use_ssl) override;
     int disconnect_printer() override;
     int send_message_to_printer(std::string dev_id, std::string json_str, int qos, int flag) override;
diff --git a/src/slic3r/Utils/IPrinterAgent.hpp b/src/slic3r/Utils/IPrinterAgent.hpp
index 85a1ffb8fc..fc05a23ba3 100644
--- a/src/slic3r/Utils/IPrinterAgent.hpp
+++ b/src/slic3r/Utils/IPrinterAgent.hpp
@@ -93,6 +93,19 @@ public:
     { return ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED; }
     virtual int command_ams_select_tray(std::string, std::string, int, bool)
     { return ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED; }
+    virtual int command_xyz_abs(std::string dev_id, int sequence_id, bool lan_mode)
+    { return ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED; }
+    virtual int command_auto_leveling(std::string dev_id, int sequence_id, bool lan_mode)
+    { return ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED; }
+    virtual int command_go_home(std::string dev_id, bool is_printing, bool supports_mqtt_homing, int sequence_id, bool lan_mode)
+    { return ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED; }
+    virtual int command_set_bed(std::string dev_id, int temp, bool supports_mqtt_bed_ctrl, int sequence_id, bool lan_mode)
+    { return ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED; }
+    virtual int command_set_nozzle(std::string dev_id, int temp, int sequence_id, bool lan_mode)
+    { return ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED; }
+    virtual int command_axis_control(std::string dev_id, std::string axis, double unit, double input_val, int speed,
+                                      bool is_core_xy, bool supports_mqtt_axis_control, int sequence_id, bool lan_mode)
+    { return ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED; }
 
     /**
      * Establish a direct LAN connection to a printer.
diff --git a/src/slic3r/Utils/NetworkAgent.cpp b/src/slic3r/Utils/NetworkAgent.cpp
index b169fca052..ba719c256a 100644
--- a/src/slic3r/Utils/NetworkAgent.cpp
+++ b/src/slic3r/Utils/NetworkAgent.cpp
@@ -788,6 +788,49 @@ int NetworkAgent::command_ams_select_tray(std::string dev_id, std::string tray_i
     return -1;
 }
 
+int NetworkAgent::command_xyz_abs(std::string dev_id, int sequence_id, bool lan_mode)
+{
+    if (m_printer_agent)
+        return m_printer_agent->command_xyz_abs(dev_id, sequence_id, lan_mode);
+    return -1;
+}
+
+int NetworkAgent::command_auto_leveling(std::string dev_id, int sequence_id, bool lan_mode)
+{
+    if (m_printer_agent)
+        return m_printer_agent->command_auto_leveling(dev_id, sequence_id, lan_mode);
+    return -1;
+}
+
+int NetworkAgent::command_go_home(std::string dev_id, bool is_printing, bool supports_mqtt_homing, int sequence_id, bool lan_mode)
+{
+    if (m_printer_agent)
+        return m_printer_agent->command_go_home(dev_id, is_printing, supports_mqtt_homing, sequence_id, lan_mode);
+    return -1;
+}
+
+int NetworkAgent::command_set_bed(std::string dev_id, int temp, bool supports_mqtt_bed_ctrl, int sequence_id, bool lan_mode)
+{
+    if (m_printer_agent)
+        return m_printer_agent->command_set_bed(dev_id, temp, supports_mqtt_bed_ctrl, sequence_id, lan_mode);
+    return -1;
+}
+
+int NetworkAgent::command_set_nozzle(std::string dev_id, int temp, int sequence_id, bool lan_mode)
+{
+    if (m_printer_agent)
+        return m_printer_agent->command_set_nozzle(dev_id, temp, sequence_id, lan_mode);
+    return -1;
+}
+
+int NetworkAgent::command_axis_control(std::string dev_id, std::string axis, double unit, double input_val, int speed,
+                                        bool is_core_xy, bool supports_mqtt_axis_control, int sequence_id, bool lan_mode)
+{
+    if (m_printer_agent)
+        return m_printer_agent->command_axis_control(dev_id, axis, unit, input_val, speed, is_core_xy, supports_mqtt_axis_control, sequence_id, lan_mode);
+    return -1;
+}
+
 int NetworkAgent::connect_printer(std::string dev_id, std::string dev_ip, std::string username, std::string password, bool use_ssl)
 {
     if (m_printer_agent)
diff --git a/src/slic3r/Utils/NetworkAgent.hpp b/src/slic3r/Utils/NetworkAgent.hpp
index 317a357135..a82ad3f63c 100644
--- a/src/slic3r/Utils/NetworkAgent.hpp
+++ b/src/slic3r/Utils/NetworkAgent.hpp
@@ -145,6 +145,13 @@ public:
     int command_ams_refresh_rfid(std::string dev_id, std::string tray_id, int sequence_id, bool lan_mode);
     int command_ams_calibrate(std::string dev_id, int ams_id, int sequence_id, bool lan_mode);
     int command_ams_select_tray(std::string dev_id, std::string tray_id, int sequence_id, bool lan_mode);
+    int command_xyz_abs(std::string dev_id, int sequence_id, bool lan_mode);
+    int command_auto_leveling(std::string dev_id, int sequence_id, bool lan_mode);
+    int command_go_home(std::string dev_id, bool is_printing, bool supports_mqtt_homing, int sequence_id, bool lan_mode);
+    int command_set_bed(std::string dev_id, int temp, bool supports_mqtt_bed_ctrl, int sequence_id, bool lan_mode);
+    int command_set_nozzle(std::string dev_id, int temp, int sequence_id, bool lan_mode);
+    int command_axis_control(std::string dev_id, std::string axis, double unit, double input_val, int speed,
+                              bool is_core_xy, bool supports_mqtt_axis_control, int sequence_id, bool lan_mode);
     int connect_printer(std::string dev_id, std::string dev_ip, std::string username, std::string password, bool use_ssl);
     int disconnect_printer();
     int send_message_to_printer(std::string dev_id, std::string json_str, int qos, int flag);