Add LH Stinger printer profiles (#13410)

resources/profiles/LH/process/0.20mm Strength @LH Stinger.json

@@ -0,0 +1,66 @@
+{
+	"type": "process",
+	"name": "0.20mm Strength @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_strength",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"accel_to_decel_factor": "90%",
+	"bottom_shell_layers": "5",
+	"bridge_acceleration": "5000",
+	"bridge_flow": "1.4",
+	"brim_object_gap": "0.04",
+	"default_acceleration": "15000",
+	"default_jerk": "10",
+	"filter_out_gap_fill": "1",
+	"gap_infill_speed": "200",
+	"infill_anchor": "1000",
+	"infill_anchor_max": "1000",
+	"infill_jerk": "10",
+	"initial_layer_infill_speed": "120",
+	"initial_layer_jerk": "10",
+	"initial_layer_speed": "90",
+	"initial_layer_travel_speed": "250",
+	"inner_wall_acceleration": "15000",
+	"inner_wall_jerk": "10",
+	"inner_wall_line_width": "0.46",
+	"internal_solid_infill_acceleration": "15000",
+	"internal_solid_infill_line_width": "0.46",
+	"line_width": "0.46",
+	"outer_wall_jerk": "10",
+	"outer_wall_line_width": "0.46",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "60%",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "20",
+	"precise_outer_wall": "0",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"sparse_infill_acceleration": "15000",
+	"sparse_infill_density": "40%",
+	"sparse_infill_line_width": "0.46",
+	"sparse_infill_pattern": "gyroid",
+	"support_bottom_z_distance": "0.15",
+	"support_interface_speed": "200",
+	"support_line_width": "0.42",
+	"support_speed": "200",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "1",
+	"top_surface_acceleration": "5000",
+	"top_surface_jerk": "10",
+	"top_surface_speed": "200",
+	"inner_wall_speed": "200",
+	"sparse_infill_speed": "200",
+	"internal_solid_infill_speed": "200",
+	"travel_jerk": "10",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_loops": "4"
+}