Add LH Stinger printer profiles (#13410)

resources/profiles/LH/process/0.20mm Solid @LH Stinger.json

@@ -0,0 +1,64 @@
+{
+	"type": "process",
+	"name": "0.20mm Solid @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_solid",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"accel_to_decel_factor": "90%",
+	"bottom_shell_layers": "2",
+	"bridge_acceleration": "5000",
+	"bridge_density": "97%",
+	"brim_object_gap": "0.04",
+	"default_acceleration": "15000",
+	"default_jerk": "10",
+	"detect_narrow_internal_solid_infill": "0",
+	"enable_support": "1",
+	"ensure_vertical_shell_thickness": "none",
+	"filter_out_gap_fill": "2",
+	"gap_infill_speed": "200",
+	"infill_jerk": "10",
+	"infill_wall_overlap": "18%",
+	"initial_layer_jerk": "10",
+	"initial_layer_line_width": "0.45",
+	"initial_layer_print_height": "0.25",
+	"inner_wall_acceleration": "15000",
+	"inner_wall_jerk": "10",
+	"internal_solid_infill_acceleration": "15000",
+	"outer_wall_jerk": "10",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "60%",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "20",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"raft_first_layer_density": "60%",
+	"small_perimeter_threshold": "7",
+	"sparse_infill_acceleration": "15000",
+	"sparse_infill_density": "98%",
+	"sparse_infill_pattern": "rectilinear",
+	"support_interface_speed": "200",
+	"support_speed": "200",
+	"top_shell_layers": "2",
+	"top_shell_thickness": "0.6",
+	"top_solid_infill_flow_ratio": "0.96",
+	"top_surface_acceleration": "5000",
+	"top_surface_jerk": "10",
+	"top_surface_speed": "150",
+	"inner_wall_speed": "200",
+	"sparse_infill_speed": "200",
+	"internal_solid_infill_speed": "200",
+	"internal_bridge_density": "95%",
+	"internal_bridge_speed": "150",
+	"gap_fill_target": "nowhere",
+	"wall_loops": "3",
+	"travel_jerk": "10"
+}