diff --git a/resources/profiles/FlyingBear.json b/resources/profiles/FlyingBear.json
index ebe1b36210..17b1089ba5 100644
--- a/resources/profiles/FlyingBear.json
+++ b/resources/profiles/FlyingBear.json
@@ -12,6 +12,10 @@
             "name": "FlyingBear Reborn3",
             "sub_path": "machine/FlyingBear Reborn3.json"
         },
+        {
+            "name": "FlyingBear Ghost7",
+            "sub_path": "machine/Ghost7/FlyingBear Ghost7.json"
+        },
         {
             "name": "FlyingBear S1",
             "sub_path": "machine/S1/FlyingBear S1.json"
@@ -26,6 +30,10 @@
             "name": "fdm_process_common_S1",
             "sub_path": "process/S1/fdm_process_common_S1.json"
         },
+        {
+            "name": "fdm_process_common_Ghost7",
+            "sub_path": "process/Ghost7/fdm_process_common_Ghost7.json"
+        },
         {
             "name": "0.08mm Extra Fine @FlyingBear Reborn3",
             "sub_path": "process/0.08mm Extra Fine @FlyingBear Reborn3.json"
@@ -46,6 +54,28 @@
             "name": "0.24mm Draft @FlyingBear Reborn3",
             "sub_path": "process/0.24mm Draft @FlyingBear Reborn3.json"
         },
+
+        {
+            "name": "0.08mm Extra Fine @FlyingBear Ghost7",
+            "sub_path": "process/Ghost7/0.08mm Extra Fine @FlyingBear Ghost7.json"
+        },
+        {
+            "name": "0.12mm Fine @FlyingBear Ghost7",
+            "sub_path": "process/Ghost7/0.12mm Fine @FlyingBear Ghost7.json"
+        },
+        {
+            "name": "0.16mm Optimal @FlyingBear Ghost7",
+            "sub_path": "process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json"
+        },
+        {
+            "name": "0.20mm Standard @FlyingBear Ghost7",
+            "sub_path": "process/Ghost7/0.20mm Standard @FlyingBear Ghost7.json"
+        },
+        {
+            "name": "0.24mm Draft @FlyingBear Ghost7",
+            "sub_path": "process/Ghost7/0.24mm Draft @FlyingBear Ghost7.json"
+        },     
+        
         {
             "name": "fdm_process_marlin_common",
             "sub_path": "process/fdm_process_marlin_common.json"
@@ -100,6 +130,10 @@
             "name": "fdm_filament_common_S1",
             "sub_path": "filament/S1/fdm_filament_common_S1.json"
         },
+        {
+            "name": "fdm_filament_common_Ghost7",
+            "sub_path": "filament/Ghost7/fdm_filament_common_Ghost7.json"
+        },
         {
             "name": "fdm_filament_abs",
             "sub_path": "filament/fdm_filament_abs.json"
@@ -164,6 +198,10 @@
             "name": "fdm_filament_pla @S1",
             "sub_path": "filament/S1/fdm_filament_pla @S1.json"
         },
+        {
+            "name": "fdm_filament_pla @Ghost7",
+            "sub_path": "filament/Ghost7/fdm_filament_pla @Ghost7.json"
+        },
         {
             "name": "fdm_filament_pla_Hyper @S1",
             "sub_path": "filament/S1/fdm_filament_pla_Hyper @S1.json"
@@ -244,6 +282,10 @@
             "name": "Other PETG @S1",
             "sub_path": "filament/S1/Other PETG @S1.json"
         },
+        {
+            "name": "FlyingBear PLA @Ghost7",
+            "sub_path": "filament/Ghost7/FlyingBear PLA @Ghost7.json"
+        },
         {
             "name": "FlyingBear PLA @S1",
             "sub_path": "filament/S1/FlyingBear PLA @S1.json"
@@ -290,6 +332,10 @@
             "name": "FlyingBear Reborn3 0.4 nozzle",
             "sub_path": "machine/FlyingBear Reborn3 0.4 nozzle.json"
         },
+        {
+            "name": "FlyingBear Ghost7 0.4 nozzle",
+            "sub_path": "machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json"
+        },
         {
             "name": "FlyingBear S1 0.4 nozzle",
             "sub_path": "machine/S1/FlyingBear S1 0.4 nozzle.json"
diff --git a/resources/profiles/FlyingBear/FlyingBear Ghost7-bed.stl b/resources/profiles/FlyingBear/FlyingBear Ghost7-bed.stl
new file mode 100644
index 0000000000..d3c81370b7
Binary files /dev/null and b/resources/profiles/FlyingBear/FlyingBear Ghost7-bed.stl differ
diff --git a/resources/profiles/FlyingBear/FlyingBear Ghost7-bed1.stl b/resources/profiles/FlyingBear/FlyingBear Ghost7-bed1.stl
new file mode 100644
index 0000000000..5d0df36e67
Binary files /dev/null and b/resources/profiles/FlyingBear/FlyingBear Ghost7-bed1.stl differ
diff --git a/resources/profiles/FlyingBear/FlyingBear Ghost7-texture.png b/resources/profiles/FlyingBear/FlyingBear Ghost7-texture.png
new file mode 100644
index 0000000000..456ba1f935
Binary files /dev/null and b/resources/profiles/FlyingBear/FlyingBear Ghost7-texture.png differ
diff --git a/resources/profiles/FlyingBear/FlyingBear Ghost7_cover.png b/resources/profiles/FlyingBear/FlyingBear Ghost7_cover.png
new file mode 100644
index 0000000000..536bb86c69
Binary files /dev/null and b/resources/profiles/FlyingBear/FlyingBear Ghost7_cover.png differ
diff --git a/resources/profiles/FlyingBear/error_hull_show b/resources/profiles/FlyingBear/error_hull_show
new file mode 100644
index 0000000000..e69de29bb2
diff --git a/resources/profiles/FlyingBear/filament/Ghost7/FlyingBear PLA @Ghost7.json b/resources/profiles/FlyingBear/filament/Ghost7/FlyingBear PLA @Ghost7.json
new file mode 100644
index 0000000000..46d83cd19e
--- /dev/null
+++ b/resources/profiles/FlyingBear/filament/Ghost7/FlyingBear PLA @Ghost7.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "name": "FlyingBear PLA @Ghost7",
+    "inherits": "fdm_filament_pla @Ghost7",
+    "from": "system",
+    "setting_id": "GFSA04",
+    "filament_id": "GFL99",
+    "instantiation": "true",
+    "filament_flow_ratio": [
+        "0.94"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "enable_pressure_advance": [
+        "0"
+    ],
+    "pressure_advance": [
+        "0.032"
+    ],
+    "compatible_printers": [
+        "FlyingBear Ghost7 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/filament/Ghost7/fdm_filament_common_Ghost7.json b/resources/profiles/FlyingBear/filament/Ghost7/fdm_filament_common_Ghost7.json
new file mode 100644
index 0000000000..2822e10b25
--- /dev/null
+++ b/resources/profiles/FlyingBear/filament/Ghost7/fdm_filament_common_Ghost7.json
@@ -0,0 +1,144 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_common_Ghost7",
+    "from": "system",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "0"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_max_volumetric_speed": [
+        "0"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_settings_id": [
+        ""
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_vendor": [
+        "Generic"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "35"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "nozzle_temperature": [
+        "200"
+    ],
+    "temperature_vitrification": [
+        "100"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/filament/Ghost7/fdm_filament_pla @Ghost7.json b/resources/profiles/FlyingBear/filament/Ghost7/fdm_filament_pla @Ghost7.json
new file mode 100644
index 0000000000..c24daf01cc
--- /dev/null
+++ b/resources/profiles/FlyingBear/filament/Ghost7/fdm_filament_pla @Ghost7.json	
@@ -0,0 +1,97 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pla @Ghost7",
+    "inherits": "fdm_filament_common_Ghost7",
+    "from": "system",
+    "instantiation": "false",
+    "filament_vendor": [
+        "FlyingBear"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "cool_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "additional_cooling_fan_speed": [
+        "100"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json
new file mode 100644
index 0000000000..c261f33111
--- /dev/null
+++ b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json	
@@ -0,0 +1,204 @@
+{
+    "type": "machine",
+    "name": "FlyingBear Ghost7 0.4 nozzle",
+    "inherits": "fdm_klipper_common",
+    "from": "system",
+    "setting_id": "GM001",
+    "instantiation": "true",
+    "printer_model": "FlyingBear Ghost7",
+    "auxiliary_fan": "1",
+    "bed_exclude_area": [
+        "242x0",
+        "250x0",
+        "250x30",
+        "242x30"
+    ],
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
+    "change_filament_gcode": "",
+    "cooling_tube_length": "5",
+    "cooling_tube_retraction": "91.5",
+    "default_filament_profile": [
+        "FlyingBear PLA @Ghost7" 
+    ],
+    "default_print_profile": "0.20mm Standard @FlyingBear Ghost7",
+    "deretraction_speed": [
+        "30"
+    ],
+    "enable_filament_ramming": "1",
+    "extra_loading_move": "-2",
+    "extruder_clearance_height_to_lid": "69",
+    "extruder_clearance_height_to_rod": "69",
+    "extruder_clearance_radius": "55",
+    "extruder_colour": [
+        "#FCE94F"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "fan_kickstart": "0",
+    "fan_speedup_overhangs": "1",
+    "fan_speedup_time": "0",
+    "high_current_on_filament_swap": "0",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nM117 Layer {layer_num+1}/[total_layer_count] : {filament_settings_id[0]}",
+    "machine_end_gcode": "PRINT_END",
+    "machine_load_filament_time": "0",
+    "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "9",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "9",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "3",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "30",
+        "25"
+    ],
+    "machine_max_speed_x": [
+        "600",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "600",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "12"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
+    "machine_pause_gcode": "PAUSE",
+    "machine_start_gcode": ";v1.0.1-20250822;\n;*****************************\nBED_MESH_CLEAR\nM140 S[bed_temperature_initial_layer_single]\nPRINT_START\n;*************PRINT START*************\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 ;move head to drawing line position\nG1 Z0 F100\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\n;BED_MESH_CLEAR                                  \n;BED_MESH_PROFILE LOAD=default   # bedmesh load\nG1 Z2.0 F200 ;Move Z Axis up\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E8 F300 ;extrude filament\nG90\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)}  F1500 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E10\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] ; display layers begin\n;***********model start************\n",
+    "machine_unload_filament_time": "0",
+    "max_layer_height": [
+        "0.28"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "nozzle_hrc": "0",
+    "nozzle_type": "brass",
+    "nozzle_volume": "151.32",
+    "parking_pos_retraction": "92",
+    "print_host_webui": "",
+    "printable_area": [
+        "0x0",
+        "250x0",
+        "250x250",
+        "0x250"
+    ],
+    "printable_height": "205",
+    "printer_notes": "",
+    "printer_settings_id": "FlyingBear Ghost7 0.4 nozzle",
+    "printer_technology": "FFF",
+    "printer_variant": "0.4",
+    "printhost_apikey": "",
+    "printhost_authorization_type": "key",
+    "printhost_cafile": "",
+    "printhost_password": "",
+    "printhost_port": "",
+    "printhost_ssl_ignore_revoke": "0",
+    "printhost_user": "",
+    "purge_in_prime_tower": "1",
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "249"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "scan_first_layer": "0",
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "template_custom_gcode": "",
+    "thumbnails": [
+        "430x410"
+    ],
+    "upward_compatible_machine": [],
+    "use_firmware_retraction": "0",
+    "use_relative_e_distances": "1",
+    "wipe": [
+        "1"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Normal Lift"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json
new file mode 100644
index 0000000000..529b03825d
--- /dev/null
+++ b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json	
@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "FlyingBear Ghost7",
+    "model_id": "FlyingBear_Ghost7",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "FlyingBearDesign",
+    "bed_model": "FlyingBear Ghost7-bed.stl",
+    "bed_texture": "FlyingBear Ghost7-texture.png",
+    "hotend_model": "",
+    "default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
+}
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/process/Ghost7/0.08mm Extra Fine @FlyingBear Ghost7.json b/resources/profiles/FlyingBear/process/Ghost7/0.08mm Extra Fine @FlyingBear Ghost7.json
new file mode 100644
index 0000000000..90e72f336a
--- /dev/null
+++ b/resources/profiles/FlyingBear/process/Ghost7/0.08mm Extra Fine @FlyingBear Ghost7.json	
@@ -0,0 +1,30 @@
+{
+    "type": "process",
+    "name": "0.08mm Extra Fine @FlyingBear Ghost7",
+    "inherits": "fdm_process_common_Ghost7",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "inner_wall_acceleration": "3000",
+    "bottom_shell_layers": "7",
+    "overhang_1_4_speed": "30",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "top_shell_layers": "9",
+    "top_shell_thickness": "0.8",
+    "tree_support_wall_count": "1",
+    "brim_width": "5",
+    "gap_infill_speed": "120",
+    "outer_wall_speed": "60",
+    "inner_wall_speed": "120",
+    "internal_solid_infill_speed": "150",
+    "top_surface_speed": "150",
+    "layer_height": "0.08",
+    "print_settings_id": "0.08mm Extra Fine @FlyingBear Ghost7",
+    "sparse_infill_speed": "150",
+    "exclude_object": "1",
+    "internal_bridge_speed": "50",
+    "compatible_printers": [
+        "FlyingBear Ghost7 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/process/Ghost7/0.12mm Fine @FlyingBear Ghost7.json b/resources/profiles/FlyingBear/process/Ghost7/0.12mm Fine @FlyingBear Ghost7.json
new file mode 100644
index 0000000000..2d3769bc1a
--- /dev/null
+++ b/resources/profiles/FlyingBear/process/Ghost7/0.12mm Fine @FlyingBear Ghost7.json	
@@ -0,0 +1,30 @@
+{
+    "type": "process",
+    "name": "0.12mm Fine @FlyingBear Ghost7",
+    "inherits": "fdm_process_common_Ghost7",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "inner_wall_acceleration": "3000",
+    "bottom_shell_layers": "5",
+    "overhang_1_4_speed": "30",
+    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "10",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0.6",
+    "tree_support_wall_count": "0",
+    "brim_width": "5",
+    "gap_infill_speed": "180",
+    "outer_wall_speed": "80",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_speed": "180",
+    "top_surface_speed": "150",
+    "layer_height": "0.12",
+    "print_settings_id": "0.12mm Fine @FlyingBear Ghost7",
+    "sparse_infill_speed": "180",
+    "exclude_object": "1",
+    "internal_bridge_speed": "50",
+    "compatible_printers": [
+        "FlyingBear Ghost7 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json b/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json
new file mode 100644
index 0000000000..c0ef17a3e3
--- /dev/null
+++ b/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json	
@@ -0,0 +1,39 @@
+{
+    "type": "process",
+    "name": "0.16mm Optimal @FlyingBear Ghost7",
+    "inherits": "fdm_process_common_Ghost7",
+    "from": "system",
+    "setting_id": "GP005",
+    "instantiation": "true",
+    "inner_wall_acceleration": "3000",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "top_shell_layers": "6",
+    "overhang_1_4_speed": "50",
+    "accel_to_decel_enable": "0",
+    "bottom_shell_layers": "4",
+    "bridge_speed": "25",
+    "brim_object_gap": "0.1",
+    "exclude_object": "1",
+    "gap_infill_speed": "250",
+    "inner_wall_speed": "250",
+    "outer_wall_speed": "120",
+    "internal_bridge_speed": "50",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_speed": "300",
+    "layer_height": "0.16",
+    "line_width": "0.42",
+    "outer_wall_line_width": "0.42",
+    "overhang_speed_classic": "0",
+    "precise_outer_wall": "0",
+    "print_flow_ratio": "0.95",
+    "seam_gap": "10%",
+    "skirt_speed": "50",
+    "sparse_infill_speed": "330",
+    "support_line_width": "0.42",
+    "top_shell_thickness": "1",
+    "top_surface_line_width": "0.42",
+    "compatible_printers": [
+        "FlyingBear Ghost7 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/process/Ghost7/0.20mm Standard @FlyingBear Ghost7.json b/resources/profiles/FlyingBear/process/Ghost7/0.20mm Standard @FlyingBear Ghost7.json
new file mode 100644
index 0000000000..c3c71b666d
--- /dev/null
+++ b/resources/profiles/FlyingBear/process/Ghost7/0.20mm Standard @FlyingBear Ghost7.json	
@@ -0,0 +1,28 @@
+{
+    "type": "process",
+    "name": "0.20mm Standard @FlyingBear Ghost7",
+    "inherits": "fdm_process_common_Ghost7",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "bottom_shell_layers": "3",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "1",
+    "tree_support_wall_count": "1",
+    "brim_width": "5",
+    "gap_infill_speed": "250",
+    "inner_wall_speed": "300",
+    "internal_solid_infill_speed": "250",
+    "layer_height": "0.2",
+    "print_settings_id": "0.20mm Standard @FlyingBear Ghost7",
+    "sparse_infill_speed": "270",
+    "exclude_object": "1",
+    "internal_bridge_speed": "50",
+    "top_solid_infill_flow_ratio": "0.97",
+    "compatible_printers": [
+        "FlyingBear Ghost7 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/process/Ghost7/0.24mm Draft @FlyingBear Ghost7.json b/resources/profiles/FlyingBear/process/Ghost7/0.24mm Draft @FlyingBear Ghost7.json
new file mode 100644
index 0000000000..5023e69e37
--- /dev/null
+++ b/resources/profiles/FlyingBear/process/Ghost7/0.24mm Draft @FlyingBear Ghost7.json	
@@ -0,0 +1,27 @@
+{
+    "type": "process",
+    "name": "0.24mm Draft @FlyingBear Ghost7",
+    "inherits": "fdm_process_common_Ghost7",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
+    "bottom_shell_layers": "3",
+    "overhang_1_4_speed": "50",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "top_shell_layers": "4",
+    "top_shell_thickness": "1",
+    "tree_support_wall_count": "1",
+    "brim_width": "3",
+    "gap_infill_speed": "230",
+    "inner_wall_speed": "230",
+    "internal_solid_infill_speed": "230",
+    "layer_height": "0.24",
+    "print_settings_id": "0.24mm Draft @FlyingBear Ghost7",
+    "sparse_infill_speed": "230",
+    "exclude_object": "1",
+    "internal_bridge_speed": "50",
+    "compatible_printers": [
+        "FlyingBear Ghost7 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json b/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json
new file mode 100644
index 0000000000..caf2f7d7e2
--- /dev/null
+++ b/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json
@@ -0,0 +1,214 @@
+{
+    "type": "process",
+    "name": "fdm_process_common_Ghost7",
+    "from": "system",
+    "instantiation": "false",
+    "accel_to_decel_enable": "0",
+    "accel_to_decel_factor": "50%",
+    "bottom_shell_thickness": "0",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "1",
+    "bridge_no_support": "0",
+    "bridge_speed": "25",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0.1",
+    "brim_type": "auto_brim",
+    "compatible_printers_condition": "",
+    "default_acceleration": "10000",
+    "default_jerk": "0",
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "1",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0.15",
+    "enable_arc_fitting": "0",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "0",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "ensure_vertical_shell_thickness": "1",
+    "extra_perimeters_on_overhangs": "0",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "0",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
+    "infill_combination": "0",
+    "infill_direction": "45",
+    "infill_jerk": "9",
+    "infill_wall_overlap": "15%",
+    "initial_layer_acceleration": "500",
+    "initial_layer_infill_speed": "50",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "50",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "5000",
+    "inner_wall_jerk": "9",
+    "inner_wall_line_width": "0.45",
+    "interface_shells": "0",
+    "internal_bridge_speed": "50%",
+    "internal_bridge_support_thickness": "0.8",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0.42",
+    "internal_solid_infill_pattern": "monotonic",
+    "ironing_flow": "10%",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "line_width": "0.42",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_width_top_surface": "100%",
+    "minimum_sparse_infill_area": "15",
+    "notes": "",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "1",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "5000",
+    "outer_wall_jerk": "9",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "200",
+    "overhang_4_4_speed": "10",
+    "overhang_speed_classic": "0",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "prime_tower_brim_width": "3",
+    "prime_tower_width": "35",
+    "prime_volume": "45",
+    "print_sequence": "by layer",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "seam_gap": "10%",
+    "seam_position": "aligned",
+    "single_extruder_multi_material_priming": "0",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "0",
+    "slowdown_for_curled_perimeters": "0",
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "15%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.45",
+    "sparse_infill_pattern": "crosshatch",
+    "spiral_mode": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "2",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "2",
+    "support_line_width": "0.42",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_remove_small_overhang": "1",
+    "support_speed": "150",
+    "support_style": "default",
+    "support_threshold_angle": "30",
+    "support_top_z_distance": "0.2",
+    "support_type": "normal(auto)",
+    "thick_bridges": "0",
+    "timelapse_type": "0",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "2000",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.42",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_speed": "200",
+    "travel_acceleration": "10000",
+    "travel_jerk": "12",
+    "travel_speed": "500",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "0",
+    "tree_support_branch_angle": "45",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "3",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "0",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "classic",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "wall_loops": "2",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "0",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extruder": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": [
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0",
+    "exclude_object": "1"
+}
\ No newline at end of file