fix(profiles): Snapmaker U1 — cap ABS/ASA/PPS bed temps at 100 °C (#15483)

The U1's heated bed tops out at 100 °C, but these profiles requested
105-110 °C, which leads to print errors unless the user modifies the
printer's firmware configuration.

Affected profiles:
- Snapmaker ABS @U1 base (110/105 → 100)
- Snapmaker ASA @U1 base (110 → 100)
- Fiberon ASA-CF08 @Snapmaker U1 base (105 → 100)
- Fiberon PPS-GF20 @Snapmaker U1 base (105 → 100)

Bumps Snapmaker.json to 02.04.00.10.

Co-authored-by: yw4z <ywsyildiz@gmail.com>

resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1 base.json

@@ -15,13 +15,13 @@
 		"1"
 	],
 	"cool_plate_temp": [
-		"105"
+		"100"
 	],
 	"cool_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"eng_plate_temp": [
-		"105"
+		"100"
 	],
 	"eng_plate_temp_initial_layer": [
 		"100"
@@ -48,7 +48,7 @@
 		"Polymaker"
 	],
 	"hot_plate_temp": [
-		"105"
+		"100"
 	],
 	"hot_plate_temp_initial_layer": [
 		"100"
@@ -72,7 +72,7 @@
 		"110.8"
 	],
 	"textured_plate_temp": [
-		"105"
+		"100"
 	],
 	"textured_plate_temp_initial_layer": [
 		"100"

resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1 base.json

@@ -15,16 +15,16 @@
 		"1"
 	],
 	"cool_plate_temp": [
-		"105"
+		"100"
 	],
 	"cool_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"eng_plate_temp": [
-		"105"
+		"100"
 	],
 	"eng_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"fan_cooling_layer_time": [
 		"12"
@@ -51,10 +51,10 @@
 		"Polymaker"
 	],
 	"hot_plate_temp": [
-		"105"
+		"100"
 	],
 	"hot_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"nozzle_temperature": [
 		"300"
@@ -81,10 +81,10 @@
 		"110"
 	],
 	"textured_plate_temp": [
-		"105"
+		"100"
 	],
 	"textured_plate_temp_initial_layer": [
-		"105"
+		"100"
 	],
 	"filament_type": [
 		"ABS"