Merge branch 'main' into rat-rig-covers

cmake/modules/MacOSXBundleInfo.plist.in

@@ -37,6 +37,14 @@
         <array>
           <string>orcaslicer</string>
         </array>
+      </dict>
+		<dict>
+        <key>CFBundleURLName</key>
+        <string>BambuStudio Downloads</string>
+        <key>CFBundleURLSchemes</key>
+        <array>
+          <string>bambustudioopen</string>
+        </array>
       </dict>
     </array>
 	<key>CFBundleDocumentTypes</key>

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -5516,6 +5516,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7247,6 +7250,14 @@ msgid ""
 "does not support to print on the Cool Plate"
 msgstr ""
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr ""
 
@@ -8904,6 +8915,11 @@ msgstr ""
 msgid "°C"
 msgstr ""
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -8930,6 +8946,11 @@ msgid ""
 "support to print on the Cool Plate"
 msgstr ""
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -8948,12 +8969,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr ""
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
 msgstr ""
 
 msgid "Engineering Plate"
 msgstr ""
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr ""
 
@@ -9799,6 +9826,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -9823,6 +9851,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-07-07 18:43+0200\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5927,6 +5927,9 @@ msgstr "Bloquejar la placa actual"
 msgid "Edit current plate name"
 msgstr "Editar el nom de la placa actual"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Personalitzar la placa actual"
 
@@ -7903,6 +7906,14 @@ msgstr ""
 "Temperatura del llit quan s'instal·la la Base Freda. El valor 0 significa "
 "que el filament no admet imprimir a la Base Freda"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Base d'enginyeria"
 
@@ -9793,6 +9804,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9827,6 +9843,11 @@ msgstr ""
 "Temperatura del llit en la capa inicial. El valor 0 significa que el "
 "filament no admet imprimir a la Base Freda"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9851,12 +9872,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Tipus de llit suportats per la impressora"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Base Freda"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Base d'Enginyeria"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Seqüència d'impressió de primera capa"
 
@@ -10892,6 +10919,7 @@ msgstr "Avanç de Pressió Lineal( Klipper ) AKA Factor d'Avanç Lineal( Marlin
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10916,6 +10944,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17293,6 +17322,9 @@ msgstr ""
 "augmentar adequadament la temperatura del llit pot reduir la probabilitat de "
 "deformació."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Base Freda"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Invertir en capes senars"
 

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -5801,6 +5801,9 @@ msgstr "Zamknout aktuální podložku"
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Přizpůsobit aktuální podložku"
 
@@ -7687,6 +7690,14 @@ msgstr ""
 "Toto je teplota podložky, když je Cool podložka. Hodnota 0 znamená, že "
 "filament nepodporuje tisk na Cool Podložku"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering podložka"
 
@@ -9482,6 +9493,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9516,6 +9532,11 @@ msgstr ""
 "Toto je teplota podložky první vrstvy. Hodnota 0 znamená filament "
 "nepodporuje tisk na Cool Podložku"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9540,12 +9561,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Typy podložek podporované tiskárnou"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Cool Podložka"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Podložka"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Sekvence tisku první vrstvy"
 
@@ -10478,6 +10505,7 @@ msgstr "Předstih tlaku (Klipper) AKA Lineární faktor předstihu (Marlin)"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10502,6 +10530,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16272,6 +16301,9 @@ msgid ""
 "probability of warping."
 msgstr ""
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Podložka"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Obrátit na lichých"
 

localization/i18n/de/OrcaSlicer_de.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -4847,10 +4847,10 @@ msgid "Clone copies of selections"
 msgstr "Ausgewählte Kopien duplizieren"
 
 msgid "Duplicate Current Plate"
-msgstr ""
+msgstr "Aktuelle Druckplatte duplizieren"
 
 msgid "Duplicate the current plate"
-msgstr ""
+msgstr "Dupliziert die aktuelle Druckplatte"
 
 msgid "Select all"
 msgstr "Alles auswählen"
@@ -5980,6 +5980,9 @@ msgstr "Speere aktuelle Platte"
 msgid "Edit current plate name"
 msgstr "Bearbeite den Namen der aktuellen Platte"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Aktuelle Platte anpassen"
 
@@ -7974,6 +7977,17 @@ msgstr ""
 "Wert von 0 bedeutet, dass das Filament auf der kalten Druckplatte nicht "
 "unterstützt."
 
+msgid "Textured Cool plate"
+msgstr "Texturierte kalte Druckplatte"
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+"Dies ist die Betttemperatur, wenn die kalte Druckplatte installiert ist. Ein "
+"Wert von 0 bedeutet, dass das Filament auf der texturierten kalten "
+"Druckplatte nicht unterstützt wird."
+
 msgid "Engineering plate"
 msgstr "Technische Druckplatte"
 
@@ -9893,6 +9907,14 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+"Dies ist die Betttemperatur für Schichten mit Ausnahme der Ersten. Ein Wert "
+"von 0 bedeutet, dass das Filament auf der strukturierten kalten Druckplatte "
+"nicht unterstützt wird."
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9929,6 +9951,14 @@ msgstr ""
 "Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, "
 "dass das Filament auf der kalten Druckplatte nicht unterstützt wird."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+"Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, "
+"dass das Filament auf der strukturierten kalten Druckplatte nicht "
+"unterstützt wird."
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9953,12 +9983,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Vom Drucker unterstützte Druckbettypen"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Kalte Druckplatte"
+msgstr "Glatte kalte Druckplatte"
 
 msgid "Engineering Plate"
 msgstr "Technische Druckplatte"
 
+msgid "Smooth High Temp Plate"
+msgstr "Glatte Hochtemperatur-Druckplatte"
+
+msgid "Textured Cool Plate"
+msgstr "Strukturierte kalte Druckplatte"
+
 msgid "First layer print sequence"
 msgstr "Erste Schicht Druckreihenfolge"
 
@@ -10272,7 +10308,7 @@ msgstr ""
 "in denen Brücken nicht verankert werden können."
 
 msgid "Reverse on even"
-msgstr ""
+msgstr "Umkehren auf geraden Schichten"
 
 msgid "Overhang reversal"
 msgstr "Überhangsumkehr"
@@ -10285,6 +10321,12 @@ msgid ""
 "This setting can also help reduce part warping due to the reduction of "
 "stresses in the part walls."
 msgstr ""
+"Extrudieren Sie Umfänge, die über einem Überhang liegen, in umgekehrter "
+"Richtung auf geraden Schichten. Dieses abwechselnde Muster kann steile "
+"Überhänge drastisch verbessern.\n"
+"\n"
+"Diese Einstellung kann auch dazu beitragen, das Verziehen des Teils aufgrund "
+"der Reduzierung der Spannungen in den Teilwänden zu verringern."
 
 msgid "Reverse only internal perimeters"
 msgstr "Nur interne Umfänge umkehren"
@@ -10303,6 +10345,20 @@ msgid ""
 "Reverse Threshold to 0 so that all internal walls print in alternating "
 "directions on even layers irrespective of their overhang degree."
 msgstr ""
+"Wenden Sie die Logik der umgekehrten Umfänge nur auf interne Umfänge an.\n"
+"\n"
+"Diese Einstellung reduziert die Spannungen im Teil erheblich, da sie jetzt "
+"in abwechselnde Richtungen verteilt sind. Dies sollte das Verziehen des "
+"Teils reduzieren und gleichzeitig die Qualität der äußeren Wand erhalten. "
+"Diese Funktion kann sehr nützlich für Materialien sein, die zum Verziehen "
+"neigen, wie ABS/ASA, und auch für elastische Filamente, wie TPU und Seiden-"
+"PLA. Sie kann auch dazu beitragen, das Verziehen in schwebenden Bereichen "
+"über Stützen zu reduzieren.\n"
+"\n"
+"Damit diese Einstellung am effektivsten ist, wird empfohlen, den "
+"Umkehrschwellenwert auf 0 zu setzen, damit alle internen Wände auf geraden "
+"Schichten unabhängig von ihrem Überhangswinkel in abwechselnden Richtungen "
+"gedruckt werden."
 
 msgid "Bridge counterbore holes"
 msgstr "Brücken für Senkungen"
@@ -10339,6 +10395,9 @@ msgid ""
 "useful. Can be a % of the perimeter width.\n"
 "Value 0 enables reversal on every even layers regardless."
 msgstr ""
+"Anzahl der Millimeter, die der Überhang betragen muss, damit die Umkehrung "
+"als nützlich angesehen wird. Kann ein Prozentsatz der Umfangsbreite sein.\n"
+"Der Wert 0 aktiviert die Umkehrung auf jeder geraden Schicht."
 
 msgid "Classic mode"
 msgstr "Klassicher Modus"
@@ -10942,6 +11001,12 @@ msgid ""
 "\n"
 "This option will be disabled if spiral vase mode is enabled."
 msgstr ""
+"Die Richtung, in der die Wand-Schleifen extrudiert werdenStandardmäßig "
+"werden alle Wände gegen den Uhrzeigersinn extrudiert, es sei denn, die "
+"Option Umkehrung bei geraden Schichten ist aktiviert. Wenn diese Option auf "
+"einen anderen Wert als Auto gesetzt wird, wird die Wandrichtung unabhängig "
+"von der Umkehrung bei geraden Schichten festgelegt.\n"
+"Diese Option wird deaktiviert, wenn der Spiral-Vase-Modus aktiviert ist."
 
 msgid "Counter clockwise"
 msgstr "Gegen den Uhrzeigersinn"
@@ -11111,8 +11176,9 @@ msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)"
 msgstr "Pressure advance(Klipper)AKA Linear advance Faktor(Marlin)"
 
 msgid "Enable adaptive pressure advance (beta)"
-msgstr ""
+msgstr "Adaptive Pressure Advance aktivieren (Beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -11158,6 +11224,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr "Adaptive Pressure Advance Messung (experimentell)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17690,6 +17757,9 @@ msgstr ""
 "wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die "
 "Wahrscheinlichkeit von Verwerfungen verringert werden kann."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Kalte Druckplatte"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Umkehren bei ungeraden Schichten"
 

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5755,6 +5755,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7652,6 +7655,14 @@ msgstr ""
 "This is the bed temperature when the cool plate is installed. A value of 0 "
 "means the filament does not support printing on the Cool Plate."
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering plate"
 
@@ -9429,6 +9440,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9463,6 +9479,11 @@ msgstr ""
 "This is the bed temperature of the first layer. A value of 0 means the "
 "filament does not support printing on the Cool Plate."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9487,12 +9508,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Bed types supported by the printer"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "First layer print sequence"
 
@@ -10405,6 +10432,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10429,6 +10457,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16115,6 +16144,9 @@ msgstr ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate"
+
 #~ msgid ""
 #~ "While printing by Object, the extruder may collide skirt.\n"
 #~ "Thus, reset the skirt layer to 1 to avoid that."

localization/i18n/es/OrcaSlicer_es.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Carlos Fco. Caruncho Serrano <puzzlero@gmail.com>\n"
 "Language-Team: \n"
@@ -5961,6 +5961,9 @@ msgstr "Bloquear bandeja actual"
 msgid "Edit current plate name"
 msgstr "Editar el nombre de la bandeja actual"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Personalizar bandeja actual"
 
@@ -7946,6 +7949,14 @@ msgstr ""
 "Un valor de 0 significa que el filamento no admite la impresión en la "
 "Bandeja Fría"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Bandeja de Ingeniería"
 
@@ -9851,6 +9862,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9887,6 +9903,11 @@ msgstr ""
 "Esta es la temperatura de la cama de la primera capa. Un valor de 0 "
 "significa que el filamento no admite la impresión en la Bandeja Fría"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9913,12 +9934,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Tipos de cama que admite la impresora"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Bandeja Fría"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Bandeja de Ingeniería"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Secuencia de impresión de primera capa"
 
@@ -11108,6 +11135,7 @@ msgstr "Pressure Advance(Klipper) AKA Factor de avance lineal(Marlin)"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr "Activar Avance de Presión Lineal Adaptativo (beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -11151,6 +11179,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr "Medidas de avance lineal de presión adaptativo (beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17703,6 +17732,9 @@ msgstr ""
 "aumentar adecuadamente la temperatura del lecho térmico puede reducir la "
 "probabilidad de deformaciones."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Bandeja Fría"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Invertir en impar"
 

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -5963,6 +5963,9 @@ msgstr "Verrouiller le plateau actuel"
 msgid "Edit current plate name"
 msgstr "Modifier le nom du plateau actuel"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Personnaliser le plateau actuel"
 
@@ -7990,6 +7993,17 @@ msgstr ""
 "plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas "
 "être imprimé sur le plateau froid."
 
+msgid "Textured Cool plate"
+msgstr "Plaque Cool plate texturée"
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+"Température du plateau lorsque la plaque Cool plate est installée. La valeur "
+"0 signifie que le filament ne peut pas être imprimé sur la plaque Cool plate "
+"texturée."
+
 msgid "Engineering plate"
 msgstr "Plaque Engineering"
 
@@ -9935,6 +9949,14 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+"Température du plateau pour les couches à l’exception de la couche initiale. "
+"La valeur 0 signifie que le filament ne peut pas être imprimé sur la plaque "
+"Cool plate texturée."
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9972,6 +9994,13 @@ msgstr ""
 "0 signifie que ce filament ne peut pas être imprimé sur le plateau froid "
 "(\"Cool plate\")."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+"Température du plateau de la couche initiale. La valeur 0 signifie que le "
+"filament ne peut pas être imprimé sur la plaque Cool plate texturée."
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9998,12 +10027,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Types de plateaux pris en charge par l'imprimante"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Cool Plate/Plaque PLA"
+msgstr "Plaque Cool plate lisse"
 
 msgid "Engineering Plate"
 msgstr "Plaque Engineering"
 
+msgid "Smooth High Temp Plate"
+msgstr "Plaque lisse haute température"
+
+msgid "Textured Cool Plate"
+msgstr "Plaque Cool plate texturée"
+
 msgid "First layer print sequence"
 msgstr "Séquence d’impression de la première couche"
 
@@ -11207,6 +11242,7 @@ msgstr "Pressure Advance (Klipper) AKA Linear Advance (Marlin)"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr "Activer l’avance de pression adaptative (beta)"
 
+#, fuzzy, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -11252,6 +11288,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr "Mesures adaptatives de l’avance de pression (beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17867,6 +17904,9 @@ msgstr ""
 "déformer, tels que l’ABS, une augmentation appropriée de la température du "
 "plateau chauffant peut réduire la probabilité de déformation."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate/Plaque PLA"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Parois inversées sur couches impaires"
 

localization/i18n/hu/OrcaSlicer_hu.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -5800,6 +5800,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7725,6 +7728,14 @@ msgstr ""
 "Asztalhőmérséklet a hideg tálca használatával. A 0 érték azt jelenti, hogy a "
 "filament nem támogatja a Cool Plate-re történő nyomtatást"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering plate"
 
@@ -9542,6 +9553,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9576,6 +9592,11 @@ msgstr ""
 "A kezdőréteg asztalhőmérséklete. A 0 érték azt jelenti, hogy a filament nem "
 "támogatja a Cool Plate-re történő nyomtatást"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9600,12 +9621,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Nyomtató által támogatott asztaltípusok"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Az első réteg nyomtatási sorrendje"
 
@@ -10520,6 +10547,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10544,6 +10572,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16303,6 +16332,9 @@ msgstr ""
 "Tudtad, hogy a vetemedésre hajlamos anyagok (például ABS) nyomtatásakor a "
 "tárgyasztal hőmérsékletének növelése csökkentheti a vetemedés valószínűségét?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate"
+
 #~ msgid ""
 #~ "While printing by Object, the extruder may collide skirt.\n"
 #~ "Thus, reset the skirt layer to 1 to avoid that."

localization/i18n/it/OrcaSlicer_it.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5915,6 +5915,9 @@ msgstr "Piastra corrente di blocco"
 msgid "Edit current plate name"
 msgstr "Modificare il nome del piatto corrente"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Personalizza la piastra corrente"
 
@@ -7878,6 +7881,14 @@ msgstr ""
 "Temperatura del piano quando è installato il piatto Cool Plate. Il valore 0 "
 "significa che il filamento non supporta la stampa su piatto Cool Plate."
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering plate"
 
@@ -9766,6 +9777,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9800,6 +9816,11 @@ msgstr ""
 "Indica la temperatura del piano del primo layer. Un valore pari a 0 indica "
 "che il filamento non supporta la stampa sul piatto Cool Plate."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9824,12 +9845,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Tipi di piatti supportati dalla stampante"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Sequenza di stampa del primo strato"
 
@@ -10864,6 +10891,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10888,6 +10916,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17148,6 +17177,9 @@ msgstr ""
 "aumentare in modo appropriato la temperatura del piano riscaldato può "
 "ridurre la probabilità di deformazione."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Retromarcia su dispari"
 

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5720,6 +5720,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7586,6 +7589,14 @@ msgstr ""
 "常温プレートが装着時のベッド温度です。値が0の場合、フィラメントが常温プレート"
 "に使用できない意味です。"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "エンジニアリングプレート"
 
@@ -9343,6 +9354,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9377,6 +9393,11 @@ msgstr ""
 "1層目のベッド温度です。値が0の場合、フィラメントが常温プレートに使用できない"
 "意味です。"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9401,12 +9422,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "適応ベッド種類"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "常温プレート"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "エンジニアリングプレート"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "First layer print sequence"
 
@@ -10295,6 +10322,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10319,6 +10347,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -15980,6 +16009,9 @@ msgstr ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "常温プレート"
+
 #~ msgid ""
 #~ "While printing by Object, the extruder may collide skirt.\n"
 #~ "Thus, reset the skirt layer to 1 to avoid that."

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-05-31 23:33+0900\n"
 "Last-Translator: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github."
 "com>\n"
@@ -5763,6 +5763,9 @@ msgstr "현재 플레이트 잠금"
 msgid "Edit current plate name"
 msgstr "현재 번호판 이름 수정"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "사용자 정의 플레이트"
 
@@ -7650,6 +7653,14 @@ msgstr ""
 "쿨 플레이트 설치 시 베드 온도. 값 0은 필라멘트가 쿨 플레이트에 출력하는 것을 "
 "지원하지 않음을 의미합니다"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "엔지니어링 플레이트"
 
@@ -9461,6 +9472,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9495,6 +9511,11 @@ msgstr ""
 "초기 레이어의 베드 온도. 값 0은 필라멘트가 쿨 플레이트 출력을 지원하지 않음"
 "을 의미합니다"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9519,12 +9540,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "프린터가 지원하는 베드 유형"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "쿨 플레이트"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "엔지니어링 플레이트"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "첫 레이어 출력 순서"
 
@@ -10502,6 +10529,7 @@ msgstr "프레셔 어드밴스(Klipper)/리니어 어드밴스(Marlin)"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10526,6 +10554,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16532,6 +16561,9 @@ msgstr ""
 "ABS와 같이 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 "
 "높이면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "쿨 플레이트"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "홀수에 반전"
 

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5853,6 +5853,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7836,6 +7839,14 @@ msgstr ""
 "Dit is de bedtemperatuur wanneer de koelplaat is geïnstalleerd. Een waarde "
 "van 0 betekent dat het filament printen op de Cool Plate niet ondersteunt."
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering plaat"
 
@@ -9676,6 +9687,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9711,6 +9727,11 @@ msgstr ""
 "Dit is de bedtemperatuur van de beginlaag. Een waarde van 0 betekent dat het "
 "filament printen op de Cool Plate niet ondersteunt."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9735,12 +9756,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Printbedden ondersteund door de printer"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Cool (koud) printbed"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering plate (technisch printbed)"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Afdrukvolgorde van de eerste laag"
 
@@ -10664,6 +10691,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10688,6 +10716,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16554,6 +16583,9 @@ msgstr ""
 "kromtrekken, zoals ABS, een juiste verhoging van de temperatuur van het "
 "warmtebed de kans op kromtrekken kan verkleinen?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool (koud) printbed"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Overhang omkering"
 

localization/i18n/pl/OrcaSlicer_pl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <tlumaczeniebs@gmail.com>\n"
 "Language-Team: \n"
@@ -5916,6 +5916,9 @@ msgstr "Zablokuj bieżący stół"
 msgid "Edit current plate name"
 msgstr "Edytuj aktualną nazwę płyty"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Dostosuj bieżący stół"
 
@@ -7878,6 +7881,14 @@ msgstr ""
 "Temperatura stołu, gdy zainstalowana jest Cool Plate. Wartość 0 oznacza, że "
 "filament nie jest przystosowany do druku na Cool Plate"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering Plate"
 
@@ -9775,6 +9786,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9809,6 +9825,11 @@ msgstr ""
 "Temperatura stołu pierwszej warstwy. Wartość 0 oznacza, że filament nie "
 "obsługuje drukowania na Cool Plate"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9833,12 +9854,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Rodzaje płyt roboczych obsługiwanych przez drukarkę"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Cool Plate / PLA Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Sekwencja druku pierwszej warstwy"
 
@@ -10872,6 +10899,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr "Włącz adaptacyjny wzrost ciśnienia (beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10893,8 +10921,8 @@ msgid ""
 "\n"
 msgstr ""
 "Wraz ze wzrostem prędkości druku zaobserwowano, że efektywna wartość PA "
-"zazwyczaj maleje. Oznacza to, że pojedyncza wartość PA nie jest w "
+"zazwyczaj maleje. Oznacza to, że pojedyncza wartość PA nie jest w 100% "
-"100% optymalna dla wszystkich elementów i zwykle stosowana jest wartość "
+"optymalna dla wszystkich elementów i zwykle stosowana jest wartość "
 "kompromisowa, która nie powoduje zbyt dużego \"wypuklenia\" na elementach "
 "drukowanych wolniej, a jednocześnie nie powoduje przerw na elementach "
 "drukowanych szybciej.\n"
@@ -10912,6 +10940,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr "Adaptacyjny pomiar ciśnienia (beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17296,6 +17325,9 @@ msgstr ""
 "takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może "
 "zmniejszyć prawdopodobieństwo odkształceń."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate / PLA Plate"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Przeciwny kierunek na nieparzystych warstwach"
 

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -2,7 +2,7 @@
 msgid ""
 msgstr ""
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-06-01 21:51-0300\n"
 "Last-Translator: \n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -5911,6 +5911,9 @@ msgstr "Bloquear a mesa atual"
 msgid "Edit current plate name"
 msgstr "Editar nome da mesa atual"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Personalizar a mesa atual"
 
@@ -7878,6 +7881,14 @@ msgstr ""
 "Temperatura da mesa quando a cool plate (mesa fria) está instalada. Valor 0 "
 "significa que o filamento não suporta impressão na cool plate"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Mesa de engenharia"
 
@@ -9739,6 +9750,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9773,6 +9789,11 @@ msgstr ""
 "Temperatura da mesa na primeira camada. O valor 0 significa que o filamento "
 "não suporta a impressão na Cool Plate (Mesa Fria)"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9797,12 +9818,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Tipos de mesa suportadas pela impressora"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Mesa Fria"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engenharia Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Sequência de impressão da primeira camada"
 
@@ -10832,6 +10859,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10856,6 +10884,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17116,6 +17145,9 @@ msgstr ""
 "aumentar adequadamente a temperatura da mesa aquecida pode reduzir a "
 "probabilidade de empenamento?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "Mesa Fria"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Inverter em ímpares"
 

localization/i18n/ru/OrcaSlicer_ru.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V2.0.0 Official Release\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-09-15 13:34+0300\n"
 "Last-Translator: \n"
 "Language-Team: andylg@yandex.ru\n"
@@ -5951,6 +5951,9 @@ msgstr "Заблокировать текущую печатную пласти
 msgid "Edit current plate name"
 msgstr "Изменить имя текущей пластины"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Настроить текущую печатную пластину"
 
@@ -7943,6 +7946,14 @@ msgstr ""
 "Температура не подогреваемого стола. 0 означает, что пластиковая нить не "
 "поддерживает печать на этой печатной пластине."
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Инженерная пластина"
 
@@ -8133,8 +8144,8 @@ msgid ""
 "nozzle diameter value?"
 msgstr ""
 "При активации нескольких материалов на одном экструдере, \n"
-"все экструдеры должны иметь одинаковый диаметр"
+"все экструдеры должны иметь одинаковый диаметрХотите ли Вы изменить диаметр "
-"Хотите ли Вы изменить диаметр для всех экструдеров \n"
+"для всех экструдеров \n"
 "на значение диаметра сопла первого экструдера?"
 
 msgid "Nozzle diameter"
@@ -9194,8 +9205,8 @@ msgid ""
 "Your print is very close to the priming regions. Make sure there is no "
 "collision."
 msgstr ""
-"Объект печати находится слишком близко друг к другу. "
+"Объект печати находится слишком близко друг к другу. Убедитесь что нет "
-"Убедитесь что нет столкновения объектов."
+"столкновения объектов."
 
 msgid ""
 "Failed to generate gcode for invalid custom G-code.\n"
@@ -9431,8 +9442,8 @@ msgid ""
 "While the object %1% itself fits the build volume, it exceeds the maximum "
 "build volume height because of material shrinkage compensation."
 msgstr ""
-"Несмотря на то, что объём объекта %1% помещается в область сборки, "
+"Несмотря на то, что объём объекта %1% помещается в область сборки, он "
-"он превышает максимальную высоту из-за компенсации усадки материала."
+"превышает максимальную высоту из-за компенсации усадки материала."
 
 #, boost-format
 msgid "The object %1% exceeds the maximum build volume height."
@@ -9462,8 +9473,9 @@ msgid ""
 "well when the prime tower is enabled. It's very experimental, so please "
 "proceed with caution."
 msgstr ""
-"Разные диаметры сопел и нитей могут плохо работать при включённой основной башне. "
+"Разные диаметры сопел и нитей могут плохо работать при включённой основной "
-"Это ранняя экспериментальная функция, поэтому используйте с осторожностью."
+"башне. Это ранняя экспериментальная функция, поэтому используйте с "
+"осторожностью."
 
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
@@ -9476,9 +9488,8 @@ msgid ""
 "Ooze prevention is only supported with the wipe tower when "
 "'single_extruder_multi_material' is off."
 msgstr ""
-"Предотвращение образования пузырей поддерживается только при "
+"Предотвращение образования пузырей поддерживается только при использовании "
-"использовании башни стирания, когда 'single_extruder_multi_material' "
+"башни стирания, когда 'single_extruder_multi_material' выключен"
-"выключен"
 
 msgid ""
 "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, "
@@ -9863,6 +9874,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9897,6 +9913,11 @@ msgstr ""
 "Температура стола для первого слоя. 0 означает, что пластиковая нить не "
 "поддерживает печать на этой печатной пластине."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9921,12 +9942,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Типы столов, поддерживаемые принтером"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Не нагреваемая пластина"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Инженерная пластина"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Последовательность печати первого слоя"
 
@@ -10006,32 +10033,33 @@ msgid ""
 "generator and use this option to control whether the cosmetic top and bottom "
 "surface gap fill is generated"
 msgstr ""
-"Включает заполнение зазоров для выбранных твёрдых поверхностей. "
+"Включает заполнение зазоров для выбранных твёрдых поверхностей. Минимальную "
-"Минимальную длину зазора заполнения можно контролировать с помощью параметра "
+"длину зазора заполнения можно контролировать с помощью параметра фильтрации "
-"фильтрации мелких зазоров, расположенного ниже.\n"
+"мелких зазоров, расположенного ниже.\n"
 "\n"
 "Параметры:\n"
-"1. Везде: Заполняет зазоры на верхней, нижней и внутренней твёрдых поверхностях "
+"1. Везде: Заполняет зазоры на верхней, нижней и внутренней твёрдых "
-"для обеспечения максимальной прочности;\n"
+"поверхностях для обеспечения максимальной прочности;\n"
-"2. Верхние и нижние поверхности: Применяет заполнение зазоров только к верхней "
+"2. Верхние и нижние поверхности: Применяет заполнение зазоров только к "
-"и нижней поверхностям, балансируя скорость печати путём уменьшения потенциальной "
+"верхней и нижней поверхностям, балансируя скорость печати путём уменьшения "
-"избыточной эструзии в сплошном заполнении, обеспечивая отсутствие зазоров между "
+"потенциальной избыточной эструзии в сплошном заполнении, обеспечивая "
-"ними;\n"
+"отсутствие зазоров между ними;\n"
-"3. Нигде: Отключает заполнение пробелов для всех областей сплошной заливки. \n"
+"3. Нигде: Отключает заполнение пробелов для всех областей сплошной "
+"заливки. \n"
 "\n"
 "Обратите внимание, что при использовании классического генератора периметра "
 "между периметрами также могут образовываться промежутки, если между ними не "
 "помещается линия полной ширины. \n"
 "\n"
 "Если Вы хотите, чтобы все промежутки, включая сгенерированные классическим "
-"генератором периметра, были удалены, установите значение параметра фильтрации "
+"генератором периметра, были удалены, установите значение параметра "
-"маленьких промежутков на большое число, например, 999999. \n"
+"фильтрации маленьких промежутков на большое число, например, 999999. \n"
 "\n"
 "Однако этого делать не рекомендуется, поскольку заполнение зазоров между "
 "периметрами влияет на прочность модели. Для некоторых моделей, в которых "
 "между периметрами образуются чрезмерные зазоры, лучшим вариантом будет "
-"переключение на генератор паутинных стен с использованием опции для управления "
+"переключение на генератор паутинных стен с использованием опции для "
-"косметическими зазорами на верхней и нижней поверхностях."
+"управления косметическими зазорами на верхней и нижней поверхностях."
 
 msgid "Everywhere"
 msgstr "Везде"
@@ -10128,12 +10156,12 @@ msgid ""
 "object's flow ratio."
 msgstr ""
 "Это значение определяет толщину внутреннего мостового слоя. Это первый слой "
-"над разрежённым наполнителем. Немного уменьшите это значение (например, 0,9), "
+"над разрежённым наполнителем. Немного уменьшите это значение (например, "
-"чтобы улучшить качество поверхности поверх редкого наполнителя.\n"
+"0,9), чтобы улучшить качество поверхности поверх редкого наполнителя.\n"
 "\n"
 "Фактический внутренний расход моста рассчитывается путём умножения этого "
-"значения на коэффициент расхода моста, коэффициент расхода нити и, если задано, "
+"значения на коэффициент расхода моста, коэффициент расхода нити и, если "
-"коэффициент расхода объекта."
+"задано, коэффициент расхода объекта."
 
 msgid "Top surface flow ratio"
 msgstr "Коэффициент потока на верхней поверхности"
@@ -10145,9 +10173,9 @@ msgid ""
 "The actual top surface flow used is calculated by multiplying this value "
 "with the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
-"Этот фактор влияет на количество материала для верхнего сплошного наполнения. "
+"Этот фактор влияет на количество материала для верхнего сплошного "
-"Вы можете немного уменьшить его для получения гладкой поверхности."
+"наполнения. Вы можете немного уменьшить его для получения гладкой "
-"\n"
+"поверхности.\n"
 "Фактический расход на верхней поверхности рассчитывается путём умножения "
 "этого значения на коэффициент расхода нити и, если задано, на коэффициент "
 "расхода объекта."
@@ -10161,11 +10189,12 @@ msgid ""
 "The actual bottom solid infill flow used is calculated by multiplying this "
 "value with the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
-"Этот фактор влияет на количество материала для нижнего сплошного наполнения. \n"
+"Этот фактор влияет на количество материала для нижнего сплошного "
+"наполнения. \n"
 "\n"
-"Фактический расход нижнего твердого наполнителя рассчитывается путём умножения "
+"Фактический расход нижнего твердого наполнителя рассчитывается путём "
-"этого значения на коэффициент расхода нити и, если задано, на коэффициент "
+"умножения этого значения на коэффициент расхода нити и, если задано, на "
-"расхода объекта."
+"коэффициент расхода объекта."
 
 msgid "Precise wall"
 msgstr "Точные периметры"
@@ -10276,15 +10305,15 @@ msgstr ""
 "Применяйте логику обратных периметров только к внутренним периметрам.\n"
 "\n"
 "Эта настройка значительно снижает напряжения в детали, поскольку теперь они "
-"распределяются в противоположных направлениях. Это должно уменьшить деформацию "
+"распределяются в противоположных направлениях. Это должно уменьшить "
-"детали, сохраняя при этом качество внешних стенок. Эта функция может быть "
+"деформацию детали, сохраняя при этом качество внешних стенок. Эта функция "
-"очень полезна для материалов, склонных к деформации, таких как ABS/ASA, а "
+"может быть очень полезна для материалов, склонных к деформации, таких как "
-"также для эластичных нитей, таких как TPU и Silk PLA. Она также может помочь "
+"ABS/ASA, а также для эластичных нитей, таких как TPU и Silk PLA. Она также "
-"уменьшить деформацию плавающих областей над опорами."
+"может помочь уменьшить деформацию плавающих областей над опорами.\n"
-"\n"
+"Чтобы эта настройка была наиболее эффективной, рекомендуется установить "
-"Чтобы эта настройка была наиболее эффективной, рекомендуется установить порог "
+"порог Reverse Threshold на 0, чтобы все внутренние стены печатались в "
-"Reverse Threshold на 0, чтобы все внутренние стены печатались в чередующихся "
+"чередующихся направлениях на ровных слоях, независимо от степени их "
-"направлениях на ровных слоях, независимо от степени их нависания."
+"нависания."
 
 msgid "Bridge counterbore holes"
 msgstr "Мост для зенкованных отверстий"
@@ -10322,8 +10351,8 @@ msgid ""
 "useful. Can be a % of the perimeter width.\n"
 "Value 0 enables reversal on every even layers regardless."
 msgstr ""
-"Количество миллиметров свеса, которое должно быть, чтобы разворот "
+"Количество миллиметров свеса, которое должно быть, чтобы разворот считался "
-"считался полезным, может составлять % от ширины периметра.\n"
+"полезным, может составлять % от ширины периметра.\n"
 "Значение 0 включает разворот на всех чётных слоях независимо от этого "
 "параметра."
 
@@ -10370,14 +10399,14 @@ msgstr ""
 "Обычно рекомендуется включать эту опцию, только если охлаждение принтера "
 "недостаточно мощное или скорость печати не настолько низкая, что скручивание "
 "по периметру не происходит. При печати с высокой скоростью по внешнему "
-"периметру этот параметр может вносить небольшие артефакты при замедлении из-за "
+"периметру этот параметр может вносить небольшие артефакты при замедлении из-"
-"большого разброса скоростей печати. Если Вы заметили артефакты, убедитесь, "
+"за большого разброса скоростей печати. Если Вы заметили артефакты, "
-"что опережение давления настроено правильно.\n"
+"убедитесь, что опережение давления настроено правильно.\n"
 "\n"
-"Примечание: Когда эта опция включена, периметры нависаний рассматриваются как "
+"Примечание: Когда эта опция включена, периметры нависаний рассматриваются "
-"нависания, то есть скорость нависания применяется, даже если периметр нависания "
+"как нависания, то есть скорость нависания применяется, даже если периметр "
-"является частью моста. Например, если периметр нависает на 100%, а снизу его "
+"нависания является частью моста. Например, если периметр нависает на 100%, а "
-"не поддерживает стена, будет применяться скорость нависания 100%."
+"снизу его не поддерживает стена, будет применяться скорость нависания 100%."
 
 msgid "mm/s or %"
 msgstr "мм/с или %"
@@ -10397,8 +10426,8 @@ msgstr ""
 "\n"
 "Кроме того, если отключена функция замедления для скрученных периметров или "
 "включен режим классического свеса, то скорость печати будет соответствовать "
-"скорости печати стен свесов, опирающихся менее чем на 13%, независимо от того, "
+"скорости печати стен свесов, опирающихся менее чем на 13%, независимо от "
-"являются ли они частью моста или свеса."
+"того, являются ли они частью моста или свеса."
 
 msgid "mm/s"
 msgstr "мм/с"
@@ -10643,30 +10672,31 @@ msgstr ""
 "Эта опция может помочь уменьшить заваливание верхних поверхностей в сильно "
 "наклонных или изогнутых моделях.\n"
 "\n"
-"По-умолчанию небольшие внутренние мосты подвергаются фильтрации, а внутренняя "
+"По-умолчанию небольшие внутренние мосты подвергаются фильтрации, а "
-"сплошная заливка печатается непосредственно поверх разреженной заливки. "
+"внутренняя сплошная заливка печатается непосредственно поверх разреженной "
-"В большинстве случаев это хорошо работает, ускоряя печать без особого ущерба "
+"заливки. В большинстве случаев это хорошо работает, ускоряя печать без "
-"для качества верхней поверхности.\n" 
+"особого ущерба для качества верхней поверхности.\n"
 "\n"
 "Однако в сильно наклонных или изогнутых моделях, особенно если используется "
-"слишком низкая плотность разреженной заливки, это может привести к скручиванию "
+"слишком низкая плотность разреженной заливки, это может привести к "
-"незакреплённой сплошной заливки, вызывая заваливание.\n"
+"скручиванию незакреплённой сплошной заливки, вызывая заваливание.\n"
 "\n"
 "Отключение этой опции приведет к печати внутреннего мостового слоя поверх "
 "слегка незакреплённого внутреннего сплошного наполнителя. Приведенные ниже "
 "параметры регулируют степень фильтрации, т.е. количество создаваемых "
 "внутренних мостиков.\n"
 "\n"
-"Фильтр - включите эту опцию. Это поведение по умолчанию, и оно хорошо работает "
+"Фильтр - включите эту опцию. Это поведение по умолчанию, и оно хорошо "
-"в большинстве случаев.\n"
+"работает в большинстве случаев.\n"
 "\n"
 "Ограниченная фильтрация - создает внутренние мостики на сильно наклонных "
-"поверхностях, избегая при этом создания ненужных внутренних мостиков. "
+"поверхностях, избегая при этом создания ненужных внутренних мостиков. Это "
-"Это хорошо работает для большинства сложных моделей.\n"
+"хорошо работает для большинства сложных моделей.\n"
 "\n"
 "Без фильтрации - создаёт внутренние мосты на каждом потенциальном внутреннем "
-"выступе. Этот вариант полезен для моделей с сильно наклоненной верхней поверхностью. "
+"выступе. Этот вариант полезен для моделей с сильно наклоненной верхней "
-"Однако в большинстве случаев он создаёт слишком много ненужных мостов."
+"поверхностью. Однако в большинстве случаев он создаёт слишком много ненужных "
+"мостов."
 
 msgid "Filter"
 msgstr "Фильтр"
@@ -10919,11 +10949,13 @@ msgid ""
 "\n"
 "This option will be disabled if spiral vase mode is enabled."
 msgstr ""
-"Направление, в котором выдавливаются петли стены, если смотреть сверху вниз.\n"
+"Направление, в котором выдавливаются петли стены, если смотреть сверху "
+"вниз.\n"
 "\n"
 "По-умолчанию все стены выдавливаются против часовой стрелки, если не включен "
 "параметр реверса по чётным. Если установить для этого параметра значение, "
-"отличное от Auto, направление стены будет задано независимо от реверса по чётным.\n"
+"отличное от Auto, направление стены будет задано независимо от реверса по "
+"чётным.\n"
 "\n"
 "Эта опция будет отключена, если включён режим спиральной вазы."
 
@@ -11073,8 +11105,8 @@ msgstr ""
 "Материал может иметь объёмные изменения после перехода из расплавленного "
 "состояния в кристаллическое. Эта настройка пропорционально изменяет весь "
 "экструзионный поток этой нити в gcode. Рекомендуемый диапазон значений - от "
-"0,95 до 1,05. Возможно, вы можете настроить это значение для получения хорошей "
+"0,95 до 1,05. Возможно, вы можете настроить это значение для получения "
-"плоской поверхности при небольшом переливе или недоливе.\n"
+"хорошей плоской поверхности при небольшом переливе или недоливе.\n"
 "\n"
 "Конечный коэффициент расхода объекта равен этому значению, умноженному на "
 "коэффициент расхода филамента."
@@ -11097,6 +11129,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr "Включить адаптивный pressure advance (бета)"
 
+#, fuzzy, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -11117,28 +11150,31 @@ msgid ""
 "and for when tool changing.\n"
 "\n"
 msgstr ""
-"Было замечено, что с увеличением скорости печати (и, следовательно, увеличением "
+"Было замечено, что с увеличением скорости печати (и, следовательно, "
-"объёмного потока через сопло) и ускорения эффективное значение PA обычно "
+"увеличением объёмного потока через сопло) и ускорения эффективное значение "
-"уменьшается. Это означает, что одно значение PA не всегда на 100% оптимально "
+"PA обычно уменьшается. Это означает, что одно значение PA не всегда на 100% "
-"для всех элементов, и обычно используется компромиссное значение, которое не "
+"оптимально для всех элементов, и обычно используется компромиссное значение, "
-"вызывает слишком сильных выпуклостей на элементах с меньшей скоростью потока и "
+"которое не вызывает слишком сильных выпуклостей на элементах с меньшей "
-"ускорениями и в то же время не вызывает зазоров на более быстрых элементах.\n"
+"скоростью потока и ускорениями и в то же время не вызывает зазоров на более "
+"быстрых элементах.\n"
 "\n"
-"Данная функция призвана устранить это ограничение путем моделирования реакции "
+"Данная функция призвана устранить это ограничение путем моделирования "
-"экструзионной системы вашего принтера в зависимости от объёмной скорости потока "
+"реакции экструзионной системы вашего принтера в зависимости от объёмной "
-"и ускорения, с которыми он печатает. Внутри системы генерируется модель, "
+"скорости потока и ускорения, с которыми он печатает. Внутри системы "
-"позволяющая экстраполировать необходимое значение pressure advance для любой "
+"генерируется модель, позволяющая экстраполировать необходимое значение "
-"заданной скорости потока и ускорения, которое затем передается принтеру в "
+"pressure advance для любой заданной скорости потока и ускорения, которое "
-"зависимости от текущих условий печати.\n"
+"затем передается принтеру в зависимости от текущих условий печати.\n"
 "\n"
-"Когда эта функция включена, значение pressure advance, указанное выше, отменяется. "
+"Когда эта функция включена, значение pressure advance, указанное выше, "
-"Однако настоятельно рекомендуется использовать разумное значение по умолчанию, "
+"отменяется. Однако настоятельно рекомендуется использовать разумное значение "
-"чтобы использовать его в качестве запасного варианта и при смене инструмента.\n"
+"по умолчанию, чтобы использовать его в качестве запасного варианта и при "
+"смене инструмента.\n"
 "\n"
 
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr "Адаптивные измерения pressure advance (бета)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -11168,8 +11204,8 @@ msgid ""
 "your filament profile\n"
 "\n"
 msgstr ""
-"Добавьте наборы значений pressure advance (PA), объемных скоростей потока "
+"Добавьте наборы значений pressure advance (PA), объемных скоростей потока и "
-"и ускорений, при которых они были измерены, через запятую. Один набор значений "
+"ускорений, при которых они были измерены, через запятую. Один набор значений "
 "на строку. Например:\n"
 "\n"
 "0.04,3.96,3000\n"
@@ -11177,24 +11213,27 @@ msgstr ""
 "0.029,7.91,3000\n"
 "0.026,7.91,10000\n"
 "\n"
-"\nКак выполнить калибровку:\n"
 "\n"
-"1. Проведите тест на опережение давления не менее чем на 3 скоростях для каждого "
+"Как выполнить калибровку:\n"
-"значения ускорения. Рекомендуется выполнить тест как минимум для скорости внешних "
-"периметров, скорости внутренних периметров и самой высокой скорости печати "
-"элементов в вашем профиле (обычно это разреженная или сплошная заливка). Затем "
-"прогоните их на тех же скоростях для самого медленного и самого быстрого ускорения "
-"печати, но не быстрее рекомендованного максимального ускорения, указанного входным "
-"формирователем Klipper.\n"
 "\n"
-"2. Запишите оптимальное значение PA для каждой скорости объемного потока и ускорения. "
+"1. Проведите тест на опережение давления не менее чем на 3 скоростях для "
-"Номер потока можно найти, выбрав поток в раскрывающемся меню цветовой схемы и переместив "
+"каждого значения ускорения. Рекомендуется выполнить тест как минимум для "
-"горизонтальный ползунок над линиями шаблона PA. Число должно быть видно в нижней части "
+"скорости внешних периметров, скорости внутренних периметров и самой высокой "
-"страницы. Идеальное значение PA должно уменьшаться тем больше, чем выше объемный расход. "
+"скорости печати элементов в вашем профиле (обычно это разреженная или "
-"Чем медленнее и с меньшим ускорением вы печатаете, тем больше диапазон допустимых значений "
+"сплошная заливка). Затем прогоните их на тех же скоростях для самого "
-"PA. Если разница не видна, используйте значение PA из более быстрого теста.3. Введите "
+"медленного и самого быстрого ускорения печати, но не быстрее "
-"триплеты значений PA, расхода и ускорения в текстовое поле здесь и сохраните профиль "
+"рекомендованного максимального ускорения, указанного входным формирователем "
-"филамента.\n"
+"Klipper.\n"
+"\n"
+"2. Запишите оптимальное значение PA для каждой скорости объемного потока и "
+"ускорения. Номер потока можно найти, выбрав поток в раскрывающемся меню "
+"цветовой схемы и переместив горизонтальный ползунок над линиями шаблона PA. "
+"Число должно быть видно в нижней части страницы. Идеальное значение PA "
+"должно уменьшаться тем больше, чем выше объемный расход. Чем медленнее и с "
+"меньшим ускорением вы печатаете, тем больше диапазон допустимых значений PA. "
+"Если разница не видна, используйте значение PA из более быстрого теста.3. "
+"Введите триплеты значений PA, расхода и ускорения в текстовое поле здесь и "
+"сохраните профиль филамента.\n"
 "\n"
 
 msgid "Enable adaptive pressure advance for overhangs (beta)"
@@ -11225,8 +11264,8 @@ msgstr ""
 "Значение pressure advance для мостов. Для отключения установките 0.\n"
 "\n"
 "Более низкое значение PA при печати мостов помогает уменьшить появление "
-"небольшой недоэкструзии сразу после мостов. Это вызвано перепадом давления "
+"небольшой недоэкструзии сразу после мостов. Это вызвано перепадом давления в "
-"в сопле при печати на воздухе, и более низкое значение PA помогает "
+"сопле при печати на воздухе, и более низкое значение PA помогает "
 "противостоять этому."
 
 msgid ""
@@ -11345,8 +11384,8 @@ msgid ""
 msgstr ""
 "Время выгрузки старой нити при смене нити. Обычно применяется для "
 "одноэкструдерных машин с несколькими материалами. Для станков со сменой "
-"инструмента или многоинструментальных станков оно обычно равно 0. "
+"инструмента или многоинструментальных станков оно обычно равно 0. Только для "
-"Только для статистики"
+"статистики"
 
 msgid "Tool change time"
 msgstr "Инструмент изменения времени"
@@ -11358,8 +11397,8 @@ msgid ""
 msgstr ""
 "Время, необходимое для переключения инструментов. Обычно применяется для "
 "станков со сменой инструмента или многоинструментальных станков. Для "
-"одноэкструдерных станков с несколькими материалами он обычно равен 0. "
+"одноэкструдерных станков с несколькими материалами он обычно равен 0. Только "
-"Только для статистики"
+"для статистики"
 
 msgid ""
 "Filament diameter is used to calculate extrusion in gcode, so it's important "
@@ -11383,8 +11422,8 @@ msgstr ""
 "Коэффициент расхода гранул получен эмпирическим путем и позволяет "
 "рассчитывать объем для гранульных принтеров.\n"
 "\n"
-"Внутри системы он преобразуется в filament_diameter. Все остальные "
+"Внутри системы он преобразуется в filament_diameter. Все остальные расчёты "
-"расчёты объема остаются прежними.\n"
+"объема остаются прежними.\n"
 "\n"
 "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )"
 
@@ -11417,7 +11456,8 @@ msgid ""
 "compensate."
 msgstr ""
 "Введите процент усадки, который получит нить после охлаждения (94%, если Вы "
-"измеряете 94 мм, а не 100 мм). Деталь будет масштабироваться по Z для компенсации."
+"измеряете 94 мм, а не 100 мм). Деталь будет масштабироваться по Z для "
+"компенсации."
 
 msgid "Loading speed"
 msgstr "Скорость загрузки"
@@ -11485,9 +11525,8 @@ msgid ""
 "this movement should be before the filament is retracted again."
 msgstr ""
 "Если установлено ненулевое значение, нить перемещается к соплу между "
-"отдельными движениями охлаждения («теснение»). Этот параметр определяет, "
+"отдельными движениями охлаждения («теснение»). Этот параметр определяет, как "
-"как долго должно продолжаться это движение, прежде чем нить снова будет "
+"долго должно продолжаться это движение, прежде чем нить снова будет втянута."
-"втянута."
 
 msgid "Speed of the first cooling move"
 msgstr "Скорость первого охлаждающего движения"
@@ -11985,9 +12024,10 @@ msgid ""
 "(in mm). This setting applies to top, bottom and solid infill and, if using "
 "the classic perimeter generator, to wall gap fill. "
 msgstr ""
-"Не печатать заливку с зазором, длина которого меньше указанного порога (в мм). "
+"Не печатать заливку с зазором, длина которого меньше указанного порога (в "
-"Эта настройка применяется к верхнему, нижнему и сплошному заполнению, а при "
+"мм). Эта настройка применяется к верхнему, нижнему и сплошному заполнению, а "
-"использовании классического генератора периметра - к заполнению зазоров в стене. "
+"при использовании классического генератора периметра - к заполнению зазоров "
+"в стене. "
 
 msgid ""
 "Speed of gap infill. Gap usually has irregular line width and should be "
@@ -12278,8 +12318,8 @@ msgstr ""
 "максимизировать прочность разреженной заливки.\n"
 "\n"
 "Количество слоев, на которых комбинируется заливка, определяется путем "
-"деления этого значения на высоту слоя и округляется до ближайшего десятичного "
+"деления этого значения на высоту слоя и округляется до ближайшего "
-"значения.\n"
+"десятичного значения.\n"
 "\n"
 "Используйте либо абсолютные значения в мм (например, 0,32 мм для насадки 0,4 "
 "мм), либо значения в % (например, 80 %). Это значение не должно быть больше "
@@ -12373,7 +12413,8 @@ msgid ""
 "filaments touch. This improves the adhesion between filaments, especially "
 "models printed in different materials."
 msgstr ""
-"Создайте взаимосвязанную балочную структуру в местах соприкосновения различных \n"
+"Создайте взаимосвязанную балочную структуру в местах соприкосновения "
+"различных \n"
 "нити соприкасаются. Это улучшает сцепление между нитями, особенно \n"
 "моделей, напечатанных из разных материалов."
 
@@ -12406,8 +12447,9 @@ msgid ""
 "The distance from the boundary between filaments to generate interlocking "
 "structure, measured in cells. Too few cells will result in poor adhesion."
 msgstr ""
-"Расстояние от границы между филаментами до образования взаимосвязанной структуры, "
+"Расстояние от границы между филаментами до образования взаимосвязанной "
-"измеряется в клетках. Слишком малое количество ячеек приводит к плохой адгезии."
+"структуры, измеряется в клетках. Слишком малое количество ячеек приводит к "
+"плохой адгезии."
 
 msgid "Interlocking boundary avoidance"
 msgstr "Избегание перечечения границ"
@@ -13506,7 +13548,8 @@ msgid ""
 "Angle from the object center to skirt start point. Zero is the most right "
 "position, counter clockwise is positive angle."
 msgstr ""
-"Угол от центра объекта до начальной точки юбки. Ноль - самое правое положение, \n"
+"Угол от центра объекта до начальной точки юбки. Ноль - самое правое "
+"положение, \n"
 "против часовой стрелки - положительный угол."
 
 msgid "Skirt height"
@@ -13533,12 +13576,13 @@ msgstr ""
 "деформации и отсоединения от печатной основы под воздействием ветра. Обычно "
 "он необходим только для принтеров с открытой рамой, т. е. без кожуха.\n"
 "\n"
-"Включено = высота юбки равна высоте самого высокого напечатанного объекта. "
+"Включено = высота юбки равна высоте самого высокого напечатанного объекта. В "
-"В противном случае используется значение 'Высота юбки'.\n"
+"противном случае используется значение 'Высота юбки'.\n"
 "\n"
-"Примечание: При активной защите от сквозняка юбка будет печататься на расстоянии "
+"Примечание: При активной защите от сквозняка юбка будет печататься на "
-"юбки от объекта. Поэтому, если активны ободки, она может пересекаться с ними. "
+"расстоянии юбки от объекта. Поэтому, если активны ободки, она может "
-"Чтобы избежать этого, увеличьте значение расстояния до юбки.\n"
+"пересекаться с ними. Чтобы избежать этого, увеличьте значение расстояния до "
+"юбки.\n"
 
 msgid "Disabled"
 msgstr "Отключено"
@@ -13553,7 +13597,8 @@ msgid ""
 "Combined - single skirt for all objects, Per object - individual object "
 "skirt."
 msgstr ""
-"Combined - единая юбка для всех объектов, Per object - юбка для отдельных объектов."
+"Combined - единая юбка для всех объектов, Per object - юбка для отдельных "
+"объектов."
 
 msgid "Combined"
 msgstr "Комбинированный"
@@ -13585,13 +13630,13 @@ msgid ""
 "Final number of loops is not taling into account whli arranging or "
 "validating objects distance. Increase loop number in such case. "
 msgstr ""
-"Минимальная длина экструзии нити в мм при печати юбки. Нулевое значение означает, "
+"Минимальная длина экструзии нити в мм при печати юбки. Нулевое значение "
-"что эта функция отключена.\n"
+"означает, что эта функция отключена.\n"
 "\n"
-"Использование ненулевого значения полезно, если принтер настроен на печать без "
+"Использование ненулевого значения полезно, если принтер настроен на печать "
-"основной линии.\n"
+"без основной линии.\n"
-"Конечное число петель не учитывается при расстановке или проверке расстояния между "
+"Конечное число петель не учитывается при расстановке или проверке расстояния "
-"объектами. В этом случае увеличьте количество петель."
+"между объектами. В этом случае увеличьте количество петель."
 
 msgid ""
 "The printing speed in exported gcode will be slowed down, when the estimated "
@@ -13703,10 +13748,11 @@ msgid ""
 "seconds to preheat the next tool. Orca will insert a M104 command to preheat "
 "the tool in advance."
 msgstr ""
-"Чтобы сократить время ожидания после смены инструмента, Orca может предварительно "
+"Чтобы сократить время ожидания после смены инструмента, Orca может "
-"нагреть следующий инструмент, пока текущий инструмент еще используется. Эта "
+"предварительно нагреть следующий инструмент, пока текущий инструмент еще "
-"настройка задает время в секундах для предварительного нагрева следующего "
+"используется. Эта настройка задает время в секундах для предварительного "
-"инструмента. Orca вставит команду M104 для предварительного нагрева инструмента."
+"нагрева следующего инструмента. Orca вставит команду M104 для "
+"предварительного нагрева инструмента."
 
 msgid "Preheat steps"
 msgstr "Шаги преднагрева"
@@ -13715,8 +13761,8 @@ msgid ""
 "Insert multiple preheat commands(e.g. M104.1). Only useful for Prusa XL. For "
 "other printers, please set it to 1."
 msgstr ""
-"Вставьте несколько команд предварительного нагрева (например, M104.1). Пригодится "
+"Вставьте несколько команд предварительного нагрева (например, M104.1). "
-"только для Prusa XL. Для других принтеров установите значение 1."
+"Пригодится только для Prusa XL. Для других принтеров установите значение 1."
 
 msgid "Start G-code"
 msgstr "Стартовый G-код"
@@ -14259,8 +14305,8 @@ msgstr ""
 "камеры, если он есть.\n"
 "\n"
 "Эта опция зависит от встроенного программного обеспечения, поддерживающего "
-"команды M191 и M141 либо с помощью макросов, либо нативно, и обычно используется, "
+"команды M191 и M141 либо с помощью макросов, либо нативно, и обычно "
-"когда установлен активный нагреватель камеры."
+"используется, когда установлен активный нагреватель камеры."
 
 msgid "Chamber temperature"
 msgstr "Температура термокамеры"
@@ -14284,24 +14330,25 @@ msgid ""
 "desire to handle heat soaking in the print start macro if no active chamber "
 "heater is installed."
 msgstr ""
-"Для высокотемпературных материалов, таких как ABS, ASA, PC и PA, более высокая "
+"Для высокотемпературных материалов, таких как ABS, ASA, PC и PA, более "
-"температура камеры может помочь подавить или уменьшить коробление и потенциально "
+"высокая температура камеры может помочь подавить или уменьшить коробление и "
-"привести к повышению прочности межслойного соединения. Однако в то же время "
+"потенциально привести к повышению прочности межслойного соединения. Однако в "
-"более высокая температура камеры снижает эффективность фильтрации воздуха для "
+"то же время более высокая температура камеры снижает эффективность "
-"ABS и ASA.\n"
+"фильтрации воздуха для ABS и ASA.\n"
 "\n"
 "Для PLA, PETG, TPU, PVA и других низкотемпературных материалов этот параметр "
-"следует отключить (установить значение 0), поскольку температура камеры должна "
+"следует отключить (установить значение 0), поскольку температура камеры "
-"быть низкой, чтобы избежать засорения экструдера из-за размягчения материала "
+"должна быть низкой, чтобы избежать засорения экструдера из-за размягчения "
-"при терморазрыве.\n"
+"материала при терморазрыве.\n"
 "\n"
 "Если этот параметр включен, он также устанавливает переменную gcode с именем "
 "chamber_temperature, которая может быть использована для передачи желаемой "
 "температуры камеры макросу запуска печати или макросу тепловой выдержки, "
-"например, такому: PRINT_START (другие переменные) CHAMBER_TEMP=[chamber_temperature]. "
+"например, такому: PRINT_START (другие переменные) "
-"Это может быть полезно, если ваш принтер не поддерживает команды M141/M191, или "
+"CHAMBER_TEMP=[chamber_temperature]. Это может быть полезно, если ваш принтер "
-"если вы хотите управлять тепловой выдержкой в макросе запуска печати, если не "
+"не поддерживает команды M141/M191, или если вы хотите управлять тепловой "
-"установлен активный нагреватель камеры."
+"выдержкой в макросе запуска печати, если не установлен активный нагреватель "
+"камеры."
 
 msgid "Nozzle temperature for layers after the initial one"
 msgstr "Температура сопла при печати для слоёв после первого."
@@ -14575,9 +14622,9 @@ msgid ""
 "0 to disable."
 msgstr ""
 "Температура сопла, когда инструмент в данный момент не используется в "
-"многоинструментальных установках. Этот параметр используется только в том случае, "
+"многоинструментальных установках. Этот параметр используется только в том "
-"если в настройках печати активна опция «Предотвращение образования наплывов». "
+"случае, если в настройках печати активна опция «Предотвращение образования "
-"Установите значение 0, чтобы отключить."
+"наплывов». Установите значение 0, чтобы отключить."
 
 msgid "X-Y hole compensation"
 msgstr "Коррекция размеров отверстий по XY"
@@ -15178,8 +15225,8 @@ msgid ""
 "Total number of extruders, regardless of whether they are used in the "
 "current print."
 msgstr ""
-"Общее количество экструдеров, независимо от того, используются ли они "
+"Общее количество экструдеров, независимо от того, используются ли они в "
-"в текущей печати."
+"текущей печати."
 
 msgid "Layer number"
 msgstr "Номер слоя"
@@ -17621,6 +17668,9 @@ msgstr ""
 "ABS, повышение температуры подогреваемого стола может снизить эту "
 "вероятность?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "Не нагреваемая пластина"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Реверс на нависаниях"
 

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -5766,6 +5766,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7676,6 +7679,14 @@ msgstr ""
 "Detta är byggplattans temperatur när Cool Plate är installerad. Värdet 0 "
 "betyder att filamentet inte stöder utskrift på Cool Plate."
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering plate"
 
@@ -9449,6 +9460,11 @@ msgstr ""
 msgid "°C"
 msgstr "° C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9483,6 +9499,11 @@ msgstr ""
 "Detta är byggplattans temperatur för första lager. Värdet 0 betyder att "
 "filamentet inte stöder utskrift på Cool Plate."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9507,12 +9528,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Byggplattans typ stöds av skrivaren"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Första lagrets utskrifts ordning"
 
@@ -10421,6 +10448,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10445,6 +10473,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16144,6 +16173,9 @@ msgstr ""
 "ABS, kan en lämplig ökning av värmebäddens temperatur minska sannolikheten "
 "för vridning."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate"
+
 #~ msgid ""
 #~ "While printing by Object, the extruder may collide skirt.\n"
 #~ "Thus, reset the skirt layer to 1 to avoid that."

localization/i18n/tr/OrcaSlicer_tr.po

@@ -3,8 +3,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
-"PO-Revision-Date: 2024-09-09 02:58+0300\n"
+"PO-Revision-Date: 2024-09-23 18:02+0300\n"
 "Last-Translator: GlauTech\n"
 "Language-Team: \n"
 "Language: tr\n"
@@ -1300,7 +1300,7 @@ msgid "Select point"
 msgstr "Nokta seç"
 
 msgid "Delete"
-msgstr "Delete"
+msgstr "Sil"
 
 msgid "Restart selection"
 msgstr "Seçimi sıfırla"
@@ -1894,13 +1894,13 @@ msgid "Invalidate cut info"
 msgstr "Kesim bilgisini geçersiz kıl"
 
 msgid "Add Primitive"
-msgstr "Şekil Ekle"
+msgstr "Şekil ekle"
 
 msgid "Add Handy models"
-msgstr "Pratik Modeller Ekle"
+msgstr "Pratik model ekle"
 
 msgid "Add Models"
-msgstr "Model Ekle"
+msgstr "Model ekle"
 
 msgid "Show Labels"
 msgstr "Etiketleri Göster"
@@ -1948,7 +1948,7 @@ msgid "arrange current plate"
 msgstr "Mevcut plakayı hizala"
 
 msgid "Reload All"
-msgstr "Tümünü Yeniden Yükle"
+msgstr "Tümünü yeniden yükle"
 
 msgid "reload all from disk"
 msgstr "Hepsini diskten yeniden yükle"
@@ -1960,7 +1960,7 @@ msgid "auto rotate current plate"
 msgstr "Geçerli plakayı otomatik döndürme"
 
 msgid "Delete Plate"
-msgstr "Plakayı Sil"
+msgstr "Plakayı sil"
 
 msgid "Remove the selected plate"
 msgstr "Seçilen plakayı kaldır"
@@ -1996,7 +1996,7 @@ msgid "Lock"
 msgstr "Kilitle"
 
 msgid "Edit Plate Name"
-msgstr "Plaka Adını Düzenle"
+msgstr "Plaka adını düzenle"
 
 msgid "Name"
 msgstr "İsim"
@@ -2528,7 +2528,7 @@ msgid ""
 "bed:\n"
 "%s"
 msgstr ""
-"Hizalama tek tablaya sığmayan aşağıdaki nesneler göz ardı edildi:\n"
+"Hizalama tek plakaya sığmayan aşağıdaki nesneler göz ardı edildi:\n"
 "%s"
 
 msgid ""
@@ -4750,10 +4750,10 @@ msgid "Clone copies of selections"
 msgstr "Seçimlerin kopyalarını kopyala"
 
 msgid "Duplicate Current Plate"
-msgstr ""
+msgstr "Geçerli plakayı çoğalt"
 
 msgid "Duplicate the current plate"
-msgstr ""
+msgstr "Geçerli plakayı çoğalt"
 
 msgid "Select all"
 msgstr "Hepsini seç"
@@ -5842,25 +5842,28 @@ msgid "Material settings"
 msgstr "Malzeme ayarları"
 
 msgid "Remove current plate (if not last one)"
-msgstr "Mevcut tablayı kaldırın (eğer sonuncusu değilse)"
+msgstr "Mevcut plakayı kaldırın (eğer sonuncusu değilse)"
 
 msgid "Auto orient objects on current plate"
-msgstr "Mevcut tablada nesneleri otomatik olarak oryante et"
+msgstr "Mevcut plakada nesneleri otomatik olarak oryante et"
 
 msgid "Arrange objects on current plate"
-msgstr "Mevcut tablada nesneleri düzenle"
+msgstr "Mevcut plakada nesneleri düzenle"
 
 msgid "Unlock current plate"
-msgstr "Mevcut tablanın kilidini aç"
+msgstr "Mevcut plakanın kilidini aç"
 
 msgid "Lock current plate"
-msgstr "Mevcut tablayı kilitle"
+msgstr "Mevcut plakayı kilitle"
 
 msgid "Edit current plate name"
-msgstr "Mevcut tabla adını düzenle"
+msgstr "Mevcut plaka adını düzenle"
+
+msgid "Move plate to the front"
+msgstr ""
 
 msgid "Customize current plate"
-msgstr "Mevcut tablayı özelleştir"
+msgstr "Mevcut plakayı özelleştir"
 
 #, boost-format
 msgid " plate %1%:"
@@ -7808,6 +7811,16 @@ msgstr ""
 "Soğutma plakası takıldığında yatak sıcaklığı. 0 değeri, filamentin Cool "
 "Plate üzerine yazdırmayı desteklemediği anlamına gelir"
 
+msgid "Textured Cool plate"
+msgstr "Dokulu Soğuk Plaka"
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+"Soğuk plaka takıldığında yatak sıcaklığı. 0 Değeri, filamentin Dokulu Soğuk "
+"Plaka üzerine yazdırmayı desteklemediği anlamına gelir."
+
 msgid "Engineering plate"
 msgstr "Mühendislik plakası"
 
@@ -7907,7 +7920,7 @@ msgid "Toolchange parameters with multi extruder MM printers"
 msgstr "Çoklu Ekstruder MM Yazıcılarda Araç Değiştirme Parametreleri"
 
 msgid "Printable space"
-msgstr "Tabla Ayarı"
+msgstr "Plaka Ayarı"
 
 #. TRN: First argument is parameter name, the second one is the value.
 #, boost-format
@@ -9688,6 +9701,13 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+"İlk katman dışındaki katmanlar için yatak sıcaklığı. 0 Değeri, filamentin "
+"Dokulu Soğuk Plaka üzerine yazdırmayı desteklemediği anlamına gelir."
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9722,6 +9742,13 @@ msgstr ""
 "İlk katmanın yatak sıcaklığı. 0 değeri, filamentin Cool Plate üzerine "
 "yazdırmayı desteklemediği anlamına gelir"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+"İlk katmanın yatak sıcaklığı. 0 Değeri, filamentin Dokulu Soğuk Plaka "
+"üzerine yazdırmayı desteklemediği anlamına gelir."
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9746,12 +9773,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Yazıcının desteklediği yatak türleri"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Soğuk Plaka"
+msgstr "Pürüzsüz Soğuk Plaka"
 
 msgid "Engineering Plate"
 msgstr "Mühendislik Plakası"
 
+msgid "Smooth High Temp Plate"
+msgstr "Pürüzsüz Yüksek Sıcaklık Plaka"
+
+msgid "Textured Cool Plate"
+msgstr "Dokulu Soğuk Plaka"
+
 msgid "First layer print sequence"
 msgstr "İlk katman yazdırma sırası"
 
@@ -10052,7 +10085,7 @@ msgstr ""
 "yolları (perimeter) oluşturun. "
 
 msgid "Reverse on even"
-msgstr ""
+msgstr "Çifteri ters çevirin"
 
 msgid "Overhang reversal"
 msgstr "Çıkıntıyı tersine çevir"
@@ -10065,6 +10098,12 @@ msgid ""
 "This setting can also help reduce part warping due to the reduction of "
 "stresses in the part walls."
 msgstr ""
+"Eşit katmanlarda ters yönde bir çıkıntının üzerinde bir kısmı bulunan "
+"çevreleri ekstrüde edin. Bu alternatif desen, dik çıkıntıları büyük ölçüde "
+"iyileştirebilir.\n"
+"\n"
+"Bu ayar aynı zamanda parça duvarlarındaki gerilimin azalması nedeniyle "
+"parçanın bükülmesinin azaltılmasına da yardımcı olabilir."
 
 msgid "Reverse only internal perimeters"
 msgstr "Yalnızca iç çevreleri ters çevir"
@@ -10083,6 +10122,18 @@ msgid ""
 "Reverse Threshold to 0 so that all internal walls print in alternating "
 "directions on even layers irrespective of their overhang degree."
 msgstr ""
+"Ters çevre mantığını yalnızca iç çevrelere uygulayın. \n"
+"\n"
+"Bu ayar, parçalar artık farklı yönlerde dağıtıldığından parça gerilimlerini "
+"büyük ölçüde azaltır. Bu, dış duvar kalitesini korurken parçanın bükülmesini "
+"de azaltacaktır. Bu özellik, ABS/ASA gibi eğrilmeye yatkın malzemeler ve "
+"ayrıca TPU ve İpek PLA gibi elastik filamentler için çok faydalı olabilir. "
+"Ayrıca destekler üzerindeki yüzen bölgelerdeki bükülmenin azaltılmasına da "
+"yardımcı olabilir.\n"
+"\n"
+"Bu ayarın en etkili olması için, Ters Eşiğin 0’a ayarlanması önerilir; "
+"böylece tüm iç duvarlar, çıkıntı derecelerine bakılmaksızın eşit katmanlara "
+"alternatif yönlerde yazdırılır."
 
 msgid "Bridge counterbore holes"
 msgstr "Köprü havşa delikleri"
@@ -10119,6 +10170,9 @@ msgid ""
 "useful. Can be a % of the perimeter width.\n"
 "Value 0 enables reversal on every even layers regardless."
 msgstr ""
+"Ters çevirmenin faydalı sayılması için çıkıntının mm sayısı olması gerekir. "
+"Çevre genişliğinin %’si olabilir.\n"
+"0 değeri ne olursa olsun her çift katmanda ters çevirmeyi mümkün kılar."
 
 msgid "Classic mode"
 msgstr "Klasik mod"
@@ -10701,6 +10755,14 @@ msgid ""
 "\n"
 "This option will be disabled if spiral vase mode is enabled."
 msgstr ""
+"Yukarıdan aşağıya bakıldığında duvar döngülerinin ekstrüzyona uğradığı yön.\n"
+"\n"
+"Çift yönlü ters çevirme seçeneği etkinleştirilmediği sürece, varsayılan "
+"olarak tüm duvarlar saat yönünün tersine ekstrüde edilir. Bunu Otomatik "
+"dışında herhangi bir seçeneğe ayarlayın, Ters çevirmeden bağımsız olarak "
+"duvar yönünü eşit olarak zorlayacaktır.\n"
+"\n"
+"Spiral vazo modu etkinse bu seçenek devre dışı bırakılacaktır."
 
 msgid "Counter clockwise"
 msgstr "Saat yönünün tersine"
@@ -10868,6 +10930,7 @@ msgstr "Basınç avansı (Klipper) Doğrusal ilerleme faktörü (Marlin)"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr "Uyarlanabilir basınç ilerlemesini etkinleştir (beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10909,6 +10972,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr "Uyarlanabilir basınç ilerleme ölçümleri (beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -11951,11 +12015,11 @@ msgstr ""
 "Yazıcınız filament yerine pellet kullanıyorsa bu seçeneği etkinleştirin"
 
 msgid "Support multi bed types"
-msgstr "Çoklu tabla"
+msgstr "Çoklu plaka"
 
 msgid "Enable this option if you want to use multiple bed types"
 msgstr ""
-"Birden fazla tabla tipi kullanmak istiyorsanız bu seçeneği etkinleştirin"
+"Birden fazla plaka tipi kullanmak istiyorsanız bu seçeneği etkinleştirin"
 
 msgid "Label objects"
 msgstr "Nesneleri etiketle"
@@ -13553,7 +13617,7 @@ msgid ""
 msgstr ""
 "Bu değer, çıkış G-kodu içindeki tüm Z koordinatlarına eklenir (veya "
 "çıkarılır).Bu, kötü Z endstop konumunu telafi etmek için kullanılır: "
-"örneğin, endstop sıfır noktanız aslında nozulu baskı tablasından 0.3mm "
+"örneğin, endstop sıfır noktanız aslında nozulu baskı plakasından 0.3mm "
 "uzakta bırakıyorsa, bu değeri -0.3 olarak ayarlayın (veya endstop'unuzu "
 "düzeltin)."
 
@@ -17306,6 +17370,9 @@ msgstr ""
 "sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını "
 "azaltabileceğini biliyor muydunuz?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "Soğuk Plaka"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Tersine çevir"
 

localization/i18n/uk/OrcaSlicer_uk.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-06-30 23:05+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5910,6 +5910,9 @@ msgstr "Блокування поточної пластини"
 msgid "Edit current plate name"
 msgstr "Редагувати поточну назву пластини"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Налаштувати поточну пластину"
 
@@ -7868,6 +7871,14 @@ msgstr ""
 "філамент\n"
 "не підтримує друк на Холодному столі"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Інженерний стіл"
 
@@ -9737,6 +9748,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9771,6 +9787,11 @@ msgstr ""
 "Температура першого шару. Значення 0 означає, що філамент не підтримує друк "
 "на холодному столі"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9795,12 +9816,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Типи ліжок, які підтримує принтер"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "Холодна пластина"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Інженерна пластина"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Послідовність друку першого шару"
 
@@ -10810,6 +10837,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10834,6 +10862,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17064,6 +17093,9 @@ msgstr ""
 "ABS, відповідне підвищення температури гарячого ліжка може зменшити "
 "ймовірність деформації."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Холодна пластина"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Зворотній на непарних"
 

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-07-28 07:12+0000\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -5652,6 +5652,9 @@ msgstr "锁定当前板"
 msgid "Edit current plate name"
 msgstr "编辑当前盘名"
 
+msgid "Move plate to the front"
+msgstr "将当前板移到最前面"
+
 msgid "Customize current plate"
 msgstr "自定义当前板"
 
@@ -7443,7 +7446,7 @@ msgid "Recommended nozzle temperature range of this filament. 0 means no set"
 msgstr "该材料的建议喷嘴温度范围。0表示未设置"
 
 msgid "Flow ratio and Pressure Advance"
-msgstr ""
+msgstr "流量和压力提前"
 
 msgid "Print chamber temperature"
 msgstr "打印仓温度"
@@ -7465,6 +7468,15 @@ msgid ""
 "does not support to print on the Cool Plate"
 msgstr "安装低温打印热床时的热床温度。0值表示这个耗材丝不支持低温打印热床"
 
+msgid "Textured Cool plate"
+msgstr "纹理低温打印热床"
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+"安装纹理低温打印热床时的热床温度。0值表示这个耗材丝不支持纹理低温打印热床"
+
 msgid "Engineering plate"
 msgstr "工程材料热床"
 
@@ -9196,6 +9208,11 @@ msgstr "非首层热床温度。0值表示这个耗材丝不支持低温打印
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr "非首层热床温度。0值表示这个耗材丝不支持纹理低温打印热床"
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9222,6 +9239,11 @@ msgid ""
 "support to print on the Cool Plate"
 msgstr "首层热床温度。0值表示这个耗材丝不支持低温打印热床"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr "首层热床温度。0值表示这个耗材丝不支持纹理低温打印热床"
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9240,12 +9262,18 @@ msgstr "首层热床温度。0值表示这个耗材丝不支持纹理PEI热床"
 msgid "Bed types supported by the printer"
 msgstr "打印机所支持的热床类型"
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
-msgstr "低温打印热床"
+msgstr "光滑的低温打印床"
 
 msgid "Engineering Plate"
 msgstr "工程材料热床"
 
+msgid "Smooth High Temp Plate"
+msgstr "光滑高温打印热床"
+
+msgid "Textured Cool Plate"
+msgstr "纹理的低温打印床"
+
 msgid "First layer print sequence"
 msgstr "第一层打印顺序"
 
@@ -9552,8 +9580,9 @@ msgid ""
 "Number of mm the overhang need to be for the reversal to be considered "
 "useful. Can be a % of the perimeter width.\n"
 "Value 0 enables reversal on every even layers regardless."
-msgstr "判定悬垂反转需要的值（毫米），可以是线宽的百分比。"
+msgstr ""
-"0值表示在每个偶数层上都启用反转。"
+"判定悬垂反转需要的值（毫米），可以是线宽的百分比。0值表示在每个偶数层上都启用"
+"反转。"
 
 msgid "Classic mode"
 msgstr "经典模式"
@@ -9797,7 +9826,7 @@ msgstr ""
 "虑关闭它。"
 
 msgid "Filter out small internal bridges (beta)"
-msgstr ""
+msgstr "过滤细微内部桥接（试验）"
 
 msgid ""
 "This option can help reducing pillowing on top surfaces in heavily slanted "
@@ -10187,8 +10216,9 @@ msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)"
 msgstr "压力提前(Klipper)或者线性提前(Marlin)"
 
 msgid "Enable adaptive pressure advance (beta)"
-msgstr ""
+msgstr "启用自适应压力提前（试验）"
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10211,8 +10241,9 @@ msgid ""
 msgstr ""
 
 msgid "Adaptive pressure advance measurements (beta)"
-msgstr ""
+msgstr "自适应压力提前参数（试验）"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -10244,7 +10275,7 @@ msgid ""
 msgstr ""
 
 msgid "Enable adaptive pressure advance for overhangs (beta)"
-msgstr ""
+msgstr "为悬垂启用自适应压力提前（试验）"
 
 msgid ""
 "Enable adaptive PA for overhangs as well as when flow changes within the "
@@ -10254,7 +10285,7 @@ msgid ""
 msgstr ""
 
 msgid "Pressure advance for bridges"
-msgstr ""
+msgstr "为搭桥启用压力提前"
 
 msgid ""
 "Pressure advance value for bridges. Set to 0 to disable. \n"
@@ -10364,7 +10395,7 @@ msgid ""
 msgstr ""
 
 msgid "Tool change time"
-msgstr ""
+msgstr "换工具头所需时间"
 
 msgid ""
 "Time taken to switch tools. It's usually applicable for tool changers or "
@@ -10391,7 +10422,7 @@ msgid ""
 msgstr ""
 
 msgid "Shrinkage (XY)"
-msgstr ""
+msgstr "收缩率（XY）"
 
 #, no-c-format, no-boost-format
 msgid ""
@@ -10407,7 +10438,7 @@ msgstr ""
 "请确保物体之间有足够的间距，因为补偿是在边界检查之后进行"
 
 msgid "Shrinkage (Z)"
-msgstr ""
+msgstr "收缩率（Z）"
 
 #, no-c-format, no-boost-format
 msgid ""
@@ -11217,7 +11248,7 @@ msgid ""
 msgstr ""
 
 msgid "Use beam interlocking"
-msgstr ""
+msgstr "启用互锁梁"
 
 msgid ""
 "Generate interlocking beam structure at the locations where different "
@@ -11226,19 +11257,19 @@ msgid ""
 msgstr ""
 
 msgid "Interlocking beam width"
-msgstr ""
+msgstr "互锁梁宽度"
 
 msgid "The width of the interlocking structure beams."
-msgstr ""
+msgstr "互锁梁的宽度"
 
 msgid "Interlocking direction"
-msgstr ""
+msgstr "互锁方向"
 
 msgid "Orientation of interlock beams."
-msgstr ""
+msgstr "互锁梁的方向"
 
 msgid "Interlocking beam layers"
-msgstr ""
+msgstr "互锁梁层数"
 
 msgid ""
 "The height of the beams of the interlocking structure, measured in number of "
@@ -11254,12 +11285,12 @@ msgid ""
 msgstr ""
 
 msgid "Interlocking boundary avoidance"
-msgstr ""
+msgstr "互锁与边界的留白量"
 
 msgid ""
 "The distance from the outside of a model where interlocking structures will "
 "not be generated, measured in cells."
-msgstr ""
+msgstr "模型边框与互锁结构的距离，以单元格为单位。"
 
 msgid "Ironing Type"
 msgstr "熨烫类型"
@@ -11910,7 +11941,7 @@ msgid "Spiral"
 msgstr "螺旋"
 
 msgid "Traveling angle"
-msgstr ""
+msgstr "空驶抬高角度"
 
 msgid ""
 "Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results "
@@ -13106,7 +13137,7 @@ msgid ""
 msgstr ""
 
 msgid "Idle temperature"
-msgstr ""
+msgstr "待机温度"
 
 msgid ""
 "Nozzle temperature when the tool is currently not used in multi-tool setups."
@@ -15862,6 +15893,9 @@ msgstr ""
 "避免翘曲\n"
 "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。"
 
+#~ msgid "Cool Plate"
+#~ msgstr "低温打印热床"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "反转奇数层悬垂方向"
 

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2023-11-06 14:37+0800\n"
 "Last-Translator: ablegods <ablegods@gmail.com>\n"
 "Language-Team: \n"
@@ -5835,6 +5835,9 @@ msgstr "鎖定列印板"
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 #, fuzzy
 msgid "Customize current plate"
 msgstr "自訂列印板參數"
@@ -7734,6 +7737,14 @@ msgid ""
 "does not support to print on the Cool Plate"
 msgstr "使用低溫列印板時的熱床溫度。0 值表示這個線材不支援低溫列印板"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 #, fuzzy
 msgid "Engineering plate"
 msgstr "工程高溫列印板"
@@ -9532,6 +9543,11 @@ msgstr "除首層外的床溫。0 值表示這個線材不支援低溫列印板"
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 #, fuzzy
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
@@ -9562,6 +9578,11 @@ msgid ""
 "support to print on the Cool Plate"
 msgstr "首層熱床溫度。0 值表示這個線材不支援低溫列印板"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 #, fuzzy
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
@@ -9584,14 +9605,19 @@ msgstr "首層熱床溫度。0 值表示這個線材不支援金屬紋理 PEI
 msgid "Bed types supported by the printer"
 msgstr "列印設備所支援的列印板類型"
 
-#, fuzzy
+msgid "Smooth Cool Plate"
-msgid "Cool Plate"
+msgstr ""
-msgstr "低溫列印板"
 
 #, fuzzy
 msgid "Engineering Plate"
 msgstr "工程高溫列印板"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "首層列印順序"
 
@@ -10522,6 +10548,7 @@ msgstr "壓力提前（Klipper）或者線性提前（Marlin）"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10546,6 +10573,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16116,6 +16144,10 @@ msgid ""
 "probability of warping."
 msgstr ""
 
+#, fuzzy
+#~ msgid "Cool Plate"
+#~ msgstr "低溫列印板"
+
 #, fuzzy
 #~ msgid "Reverse on odd"
 #~ msgstr "反轉奇數層懸空方向"

resources/images/orca_bed_pct_left.svg

@@ -0,0 +1,98 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   width="24"
+   height="302"
+   viewBox="0 0 24 302"
+   fill="none"
+   version="1.1"
+   id="svg14"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs14" />
+  <path
+     d="M 0.36895847,8.2161586 H 20.495973 V 1.5286532 H 20.6431 l 2.53059,1.265626 V 18.028666 H 23.026563 L 20.495973,16.76304 V 11.341161 H 1.6931042 L 0.36895847,8.3724087 Z"
+     id="text18"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="T" />
+  <path
+     d="m 0.95746767,22.325545 q 0,-4.687504 4.41381913,-4.687504 h 7.3563652 q 4.413819,0 4.413819,4.687504 v 3.593752 q 0,4.687505 -4.413819,4.687505 H 11.947877 L 4.812203,20.809918 q -1.2064438,0.218751 -1.2064438,1.515627 v 3.593752 q 0,1.562501 1.7655276,1.562501 h 0.7797747 l 1.3241457,2.968754 v 0.15625 H 5.3712868 q -4.41381913,0 -4.41381913,-4.687505 z m 6.92969593,-1.562502 5.0906044,6.70313 q 1.515411,-0.09375 1.515411,-1.546876 v -3.593752 q 0,-1.562502 -1.765527,-1.562502 z"
+     id="text17"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="e" />
+  <path
+     d="m 0.36895847,36.606806 v -0.156251 l 1.20644393,-2.718752 7.474067,4.843754 7.4593546,-4.843754 1.221156,2.734377 v 0.156251 l -6.282336,3.796877 6.282336,3.781253 v 0.15625 l -1.221156,2.734377 -7.4593546,-4.843753 -7.474067,4.843753 -1.20644393,-2.718752 v -0.15625 L 6.666007,40.419308 Z"
+     id="text16"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="x" />
+  <path
+     d="M 0.36895847,52.747446 H 14.463754 v -4.015628 h 0.147128 l 2.530589,1.265626 v 2.750002 h 5.296583 l 1.324146,2.968752 v 0.15625 h -6.620729 v 4.015628 H 16.994343 L 14.463754,58.62245 V 55.872448 H 1.6931042 L 0.36895847,52.903696 Z"
+     id="text15"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="t" />
+  <path
+     d="m 0.95746767,67.309956 q 0,-4.687505 4.41381913,-4.687505 H 16.405834 l 1.324146,2.968752 v 0.15625 H 5.3712868 q -1.7655276,0 -1.7655276,1.562503 v 3.593752 q 0,1.562501 1.7655276,1.562501 H 16.405834 l 1.324146,2.968753 v 0.15625 H 5.3712868 q -4.41381913,0 -4.41381913,-4.687504 z"
+     id="text14"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="u" />
+  <path
+     d="M 0.36895847,80.278718 H 12.727652 q 4.413819,0 4.413819,4.687504 v 3.906253 h -0.147128 l -2.501164,-1.250001 v -2.656252 q 0,-1.562501 -1.765527,-1.562501 H 1.6931042 L 0.36895847,80.434968 Z"
+     id="text13"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="r" />
+  <path
+     d="m 0.95746767,96.216231 q 0,-4.687503 4.41381913,-4.687503 h 7.3563652 q 4.413819,0 4.413819,4.687503 v 3.593753 q 0,4.687506 -4.413819,4.687506 H 11.947877 L 4.812203,94.700605 q -1.2064438,0.21875 -1.2064438,1.515626 v 3.593753 q 0,1.562506 1.7655276,1.562506 h 0.7797747 l 1.3241457,2.96875 v 0.15625 H 5.3712868 q -4.41381913,0 -4.41381913,-4.687506 z m 6.92969593,-1.562501 5.0906044,6.70313 q 1.515411,-0.0937 1.515411,-1.546876 v -3.593753 q 0,-1.562501 -1.765527,-1.562501 z"
+     id="text12"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="e" />
+  <path
+     d="m 0.95746767,113.87248 q 0,-4.6875 4.41381913,-4.6875 h 7.3563652 q 4.413819,0 4.413819,4.6875 v 3.59376 q 0,1.0625 -0.456095,1.5625 h 5.752678 l 1.324146,2.96875 v 0.15625 H 5.3712868 q -4.41381913,0 -4.41381913,-4.6875 z m 2.64829153,0 v 3.59376 q 0,1.5625 1.7655276,1.5625 h 7.3563652 q 1.765527,0 1.765527,-1.5625 v -3.59376 q 0,-1.5625 -1.765527,-1.5625 H 5.3712868 q -1.7655276,0 -1.7655276,1.5625 z"
+     id="text11"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="d" />
+  <path
+     d="m 0.95746767,146.37253 q 0,-5.46876 5.14945553,-5.46876 H 18.024235 q 5.149455,0 5.149455,5.46876 v 4.84376 q 0,5.46875 -5.149455,5.46875 h -1.618401 l -1.324145,-2.96875 v -0.15625 h 2.942546 q 2.501164,0 2.501164,-2.34375 v -4.84376 q 0,-2.34376 -2.501164,-2.34376 H 6.1069232 q -2.501164,0 -2.501164,2.34376 v 4.84376 q 0,2.34375 2.501164,2.34375 h 1.6184004 l 1.3241458,2.96875 v 0.15625 H 6.1069232 q -5.14945553,0 -5.14945553,-5.46875 z"
+     id="text10"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="C" />
+  <path
+     d="m 3.6057592,166.84129 v 3.59376 q 0,1.5625 1.7655276,1.5625 h 7.3563652 q 1.765527,0 1.765527,-1.5625 v -3.59376 q 0,-1.5625 -1.765527,-1.5625 H 5.3712868 q -1.7655276,0 -1.7655276,1.5625 z m -2.64829153,0 q 0,-4.6875 4.41381913,-4.6875 h 7.3563652 q 4.413819,0 4.413819,4.6875 v 3.59376 q 0,4.6875 -4.413819,4.6875 H 5.3712868 q -4.41381913,0 -4.41381913,-4.6875 z"
+     id="text9"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="o" />
+  <path
+     d="m 3.6057592,184.49756 v 3.59375 q 0,1.5625 1.7655276,1.5625 h 7.3563652 q 1.765527,0 1.765527,-1.5625 v -3.59375 q 0,-1.5625 -1.765527,-1.5625 H 5.3712868 q -1.7655276,0 -1.7655276,1.5625 z m -2.64829153,0 q 0,-4.68751 4.41381913,-4.68751 h 7.3563652 q 4.413819,0 4.413819,4.68751 v 3.59375 q 0,4.6875 -4.413819,4.6875 H 5.3712868 q -4.41381913,0 -4.41381913,-4.6875 z"
+     id="text8"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="o" />
+  <path
+     d="M 0.36895847,198.24757 H 22.438054 l 1.324146,2.96875 v 0.15625 H 1.6931042 l -1.32414573,-2.96875 z"
+     id="text7"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="l" />
+  <path
+     d="M 0.36895847,220.12259 H 22.438054 l 0.735636,1.65625 v 8.34375 q 0,5.46876 -5.149455,5.46876 h -4.413819 q -5.1494559,0 -5.1494559,-5.46876 v -6.875 H 1.6931042 l -1.32414573,-2.96875 z m 20.15644053,3.125 h -9.416147 v 6.875 q 0,2.34376 2.501164,2.34376 h 4.413819 q 2.501164,0 2.501164,-2.34376 z"
+     id="text6"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="P" />
+  <path
+     d="M 0.36895847,241.0601 H 22.438054 l 1.324146,2.96875 v 0.15625 H 1.6931042 l -1.32414573,-2.96875 z"
+     id="text5"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="l" />
+  <path
+     d="m 3.6057592,253.5601 v 3.28125 q 0,1.5625 1.7655276,1.5625 h 2.0156441 q 1.7655275,0 1.7655275,-1.5625 v -3.28125 q 0,-1.5625 -1.7655275,-1.5625 H 5.3712868 q -1.7655276,0 -1.7655276,1.5625 z m -2.64829153,0 q 0,-4.6875 4.41381913,-4.6875 h 2.0156441 q 4.4138191,0 4.4138191,4.6875 v 3.28125 q 0,0.81251 -0.441382,1.5625 h 1.368284 q 1.765527,0 1.765527,-1.5625 v -5.59375 h 0.147128 l 2.501164,1.25 v 4.34375 q 0,4.68751 -4.413819,4.68751 H 1.6931042 L 0.36895847,258.5601 v -0.15625 H 1.3988496 q -0.44138193,-0.59374 -0.44138193,-1.5625 z"
+     id="text4"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="a" />
+  <path
+     d="M 0.36895847,268.27887 H 14.463754 v -4.01563 h 0.147128 l 2.530589,1.26562 v 2.75001 h 5.296583 l 1.324146,2.96875 v 0.15625 h -6.620729 v 4.01562 h -0.147128 l -2.530589,-1.26562 v -2.75 H 1.6931042 l -1.32414573,-2.96875 z"
+     id="text3"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="t" />
+  <path
+     d="m 0.95746767,282.84136 q 0,-4.6875 4.41381913,-4.6875 h 7.3563652 q 4.413819,0 4.413819,4.6875 v 3.59376 q 0,4.6875 -4.413819,4.6875 h -0.779775 l -7.135674,-9.79688 q -1.2064438,0.21875 -1.2064438,1.51562 v 3.59376 q 0,1.5625 1.7655276,1.5625 h 0.7797747 l 1.3241457,2.96875 v 0.15625 H 5.3712868 q -4.41381913,0 -4.41381913,-4.6875 z m 6.92969593,-1.5625 5.0906044,6.70314 q 1.515411,-0.0938 1.515411,-1.54688 v -3.59376 q 0,-1.5625 -1.765527,-1.5625 z"
+     id="text2"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="e" />
+</svg>

resources/images/plate_move_front.svg

@@ -0,0 +1,74 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   width="43"
+   height="43"
+   viewBox="0 0 43 43"
+   version="1.1"
+   id="svg2"
+   sodipodi:docname="plate_move_front.svg"
+   inkscape:version="1.3.2 (091e20e, 2023-11-25, custom)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs2" />
+  <sodipodi:namedview
+     id="namedview2"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     inkscape:zoom="22.627417"
+     inkscape:cx="25.168582"
+     inkscape:cy="21.588854"
+     inkscape:window-width="1610"
+     inkscape:window-height="1237"
+     inkscape:window-x="33"
+     inkscape:window-y="721"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="svg2" />
+  <rect
+     x="1.5"
+     y="1.5"
+     width="40"
+     height="40"
+     rx="3.5"
+     style="fill:#e9e9e9;fill-opacity:1"
+     id="rect1" />
+  <path
+     d="M38,2a3,3,0,0,1,3,3V38a3,3,0,0,1-3,3H5a3,3,0,0,1-3-3V5A3,3,0,0,1,5,2H38m0-1H5A4,4,0,0,0,1,5V38a4,4,0,0,0,4,4H38a4,4,0,0,0,4-4V5a4,4,0,0,0-4-4Z"
+     style="fill:#545454"
+     id="path1" />
+  <line
+     x1="33.471352"
+     y1="6.9334393"
+     x2="9.9450846"
+     y2="6.9334393"
+     style="fill:none;stroke:#545454;stroke-width:0.850459;stroke-linecap:round;stroke-linejoin:round"
+     id="line1" />
+  <line
+     x1="32.300442"
+     y1="18.26045"
+     x2="21.987902"
+     y2="8.080493"
+     style="fill:none;stroke:#545454;stroke-width:0.714338;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1" />
+  <line
+     x1="11.504755"
+     y1="18.329735"
+     x2="21.855713"
+     y2="8.0229683"
+     style="fill:none;stroke:#545454;stroke-width:0.720111;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1-1" />
+  <line
+     x1="21.938486"
+     y1="36.433311"
+     x2="21.938484"
+     y2="8.6247864"
+     style="fill:none;stroke:#545454;stroke-width:0.623622;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1-1-2" />
+</svg>

resources/images/plate_move_front_dark.svg

@@ -0,0 +1,74 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   width="43"
+   height="43"
+   viewBox="0 0 43 43"
+   version="1.1"
+   id="svg2"
+   sodipodi:docname="plate_close_dark.svg"
+   inkscape:version="1.3.2 (091e20e, 2023-11-25, custom)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs2" />
+  <sodipodi:namedview
+     id="namedview2"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     inkscape:zoom="27.27907"
+     inkscape:cx="21.5"
+     inkscape:cy="21.5"
+     inkscape:window-width="2560"
+     inkscape:window-height="1369"
+     inkscape:window-x="-8"
+     inkscape:window-y="658"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="svg2" />
+  <rect
+     x="1.5"
+     y="1.5"
+     width="40"
+     height="40"
+     rx="3.5"
+     style="fill:#54545a"
+     id="rect1" />
+  <path
+     d="M38,2a3,3,0,0,1,3,3V38a3,3,0,0,1-3,3H5a3,3,0,0,1-3-3V5A3,3,0,0,1,5,2H38m0-1H5A4,4,0,0,0,1,5V38a4,4,0,0,0,4,4H38a4,4,0,0,0,4-4V5a4,4,0,0,0-4-4Z"
+     style="fill:#b3b3b3"
+     id="path1" />
+  <line
+     x1="9.7239828"
+     y1="6.5068207"
+     x2="34.155807"
+     y2="6.5068207"
+     style="fill:none;stroke:#c4c4c4;stroke-width:0.866675;stroke-linecap:round;stroke-linejoin:round"
+     id="line1" />
+  <line
+     x1="22.228071"
+     y1="7.6491632"
+     x2="22.228073"
+     y2="31.964647"
+     style="fill:none;stroke:#c4c4c4;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2" />
+  <line
+     x1="22.195042"
+     y1="7.4747553"
+     x2="10.588115"
+     y2="19.081686"
+     style="fill:none;stroke:#c4c4c4;stroke-width:0.675072;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2-2" />
+  <line
+     x1="33.868591"
+     y1="19.080866"
+     x2="22.261658"
+     y2="7.4739408"
+     style="fill:none;stroke:#c4c4c4;stroke-width:0.675072;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2-2-7" />
+</svg>

resources/images/plate_move_front_hover.svg

@@ -0,0 +1,74 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   width="43"
+   height="43"
+   viewBox="0 0 43 43"
+   version="1.1"
+   id="svg2"
+   sodipodi:docname="plate_close.svg"
+   inkscape:version="1.3.2 (091e20e, 2023-11-25, custom)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs2" />
+  <sodipodi:namedview
+     id="namedview2"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     inkscape:zoom="22.627417"
+     inkscape:cx="25.168582"
+     inkscape:cy="21.588854"
+     inkscape:window-width="1610"
+     inkscape:window-height="1237"
+     inkscape:window-x="1460"
+     inkscape:window-y="754"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="svg2" />
+  <rect
+     x="1.5"
+     y="1.5"
+     width="40"
+     height="40"
+     rx="3.5"
+     style="fill:#e9e9e9;fill-opacity:1"
+     id="rect1" />
+  <path
+     d="M38,2a3,3,0,0,1,3,3V38a3,3,0,0,1-3,3H5a3,3,0,0,1-3-3V5A3,3,0,0,1,5,2H38m0-1H5A4,4,0,0,0,1,5V38a4,4,0,0,0,4,4H38a4,4,0,0,0,4-4V5a4,4,0,0,0-4-4Z"
+     style="fill:#009688"
+     id="path1" />
+  <line
+     x1="33.471352"
+     y1="6.9334393"
+     x2="9.9450846"
+     y2="6.9334393"
+     style="fill:none;stroke:#009688;stroke-width:0.850459;stroke-linecap:round;stroke-linejoin:round"
+     id="line1" />
+  <line
+     x1="32.300442"
+     y1="18.26045"
+     x2="21.987902"
+     y2="8.080493"
+     style="fill:none;stroke:#009688;stroke-width:0.714338;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1" />
+  <line
+     x1="11.504755"
+     y1="18.329735"
+     x2="21.855713"
+     y2="8.0229683"
+     style="fill:none;stroke:#009688;stroke-width:0.720111;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1-1" />
+  <line
+     x1="21.938486"
+     y1="36.433311"
+     x2="21.938484"
+     y2="8.6247864"
+     style="fill:none;stroke:#009688;stroke-width:0.623622;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1-1-2" />
+</svg>

resources/images/plate_move_front_hover_dark.svg

@@ -0,0 +1,74 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   width="43"
+   height="43"
+   viewBox="0 0 43 43"
+   version="1.1"
+   id="svg2"
+   sodipodi:docname="plate_move_front_hover_dark.svg"
+   inkscape:version="1.3.2 (091e20e, 2023-11-25, custom)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs2" />
+  <sodipodi:namedview
+     id="namedview2"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     inkscape:zoom="19.289215"
+     inkscape:cx="20.555528"
+     inkscape:cy="24.85845"
+     inkscape:window-width="1350"
+     inkscape:window-height="1237"
+     inkscape:window-x="36"
+     inkscape:window-y="759"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="svg2" />
+  <rect
+     x="1.5"
+     y="1.5"
+     width="40"
+     height="40"
+     rx="3.5"
+     style="fill:#54545a"
+     id="rect1" />
+  <path
+     d="M38,2a3,3,0,0,1,3,3V38a3,3,0,0,1-3,3H5a3,3,0,0,1-3-3V5A3,3,0,0,1,5,2H38m0-1H5A4,4,0,0,0,1,5V38a4,4,0,0,0,4,4H38a4,4,0,0,0,4-4V5a4,4,0,0,0-4-4Z"
+     style="fill:#009688"
+     id="path1" />
+  <line
+     x1="9.7239828"
+     y1="6.5068207"
+     x2="34.155807"
+     y2="6.5068207"
+     style="fill:none;stroke:#009688;stroke-width:0.866675;stroke-linecap:round;stroke-linejoin:round"
+     id="line1" />
+  <line
+     x1="22.228071"
+     y1="7.6491632"
+     x2="22.228073"
+     y2="31.964647"
+     style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2" />
+  <line
+     x1="22.195042"
+     y1="7.4747553"
+     x2="10.588115"
+     y2="19.081686"
+     style="fill:none;stroke:#009688;stroke-width:0.675072;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2-2" />
+  <line
+     x1="33.868591"
+     y1="19.080866"
+     x2="22.261658"
+     y2="7.4739408"
+     style="fill:none;stroke:#009688;stroke-width:0.675072;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2-2-7" />
+</svg>

resources/profiles/Anker.json

@@ -1,6 +1,6 @@
 {
     "name": "Anker",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Anker configurations",
     "machine_model_list": [

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
     "name": "Anycubic",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Anycubic configurations",
     "machine_model_list": [

resources/profiles/Artillery.json

@@ -1,6 +1,6 @@
 {
     "name": "Artillery",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Artillery configurations",
     "machine_model_list": [

resources/profiles/BIQU.json

@@ -1,6 +1,6 @@
 {
     "name": "BIQU",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "BIQU configurations",
     "machine_model_list": [

resources/profiles/CONSTRUCT3D.json

@@ -1,6 +1,6 @@
 {
     "name": "CONSTRUCT3D",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Construct3D configurations",
     "machine_model_list": [

resources/profiles/Chuanying.json

@@ -1,7 +1,7 @@
 {
   "name": "Chuanying",
   "url": "",
-  "version": "02.02.00.00",
+  "version": "02.02.00.01",
   "force_update": "0",
   "description": "Chuanying configurations",
   "machine_model_list": [

resources/profiles/Co Print.json

@@ -1,6 +1,6 @@
 {
   "name": "Co Print",
-  "version": "02.01.01.00",
+  "version": "02.02.00.01",
   "force_update": "0",
   "description": "CoPrint configurations",
   "machine_model_list": [

resources/profiles/Comgrow.json

@@ -1,6 +1,6 @@
 {
 	"name": "Comgrow",
-	"version": "02.02.00.00",
+	"version": "02.02.00.01",
 	"force_update": "0",
 	"description": "Comgrow configurations",
 	"machine_model_list": [

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
     "name": "Creality",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Creality configurations",
     "machine_model_list": [

resources/profiles/Custom.json

@@ -1,6 +1,6 @@
 {
     "name": "Custom Printer",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "My configurations",
     "machine_model_list": [

resources/profiles/Dremel.json

@@ -1,6 +1,6 @@
 {
 	"name": "Dremel",
-	"version": "02.02.00.00",
+	"version": "02.02.00.01",
 	"force_update": "0",
 	"description": "Dremel configurations",
 	"machine_model_list": [

resources/profiles/Dremel/filament/Dremel Generic PLA.json

@@ -9,5 +9,9 @@
 	"filament_flow_ratio": ["0.98"],
 	"filament_max_volumetric_speed": ["12"],
 	"slow_down_layer_time": ["8"],
-	"compatible_printers": ""
+	"compatible_printers": [
+		"Dremel 3D45 0.4 nozzle", 
+		"Dremel 3D40 0.4 nozzle",
+		"Dremel 3D20 0.4 nozzle"
+	]
 }

resources/profiles/Elegoo.json

@@ -1,6 +1,6 @@
 {
 	"name": "Elegoo",
-	"version": "02.02.00.00",
+	"version": "02.02.00.01",
 	"force_update": "0",
 	"description": "Elegoo configurations",
 	"machine_model_list": [

resources/profiles/FLSun.json

@@ -1,6 +1,6 @@
 {
     "name": "FLSun",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "FLSun configurations",
     "machine_model_list": [

resources/profiles/Flashforge.json

@@ -1,7 +1,7 @@
 {
   "name": "Flashforge",
   "url": "",
-  "version": "02.02.00.00",
+  "version": "02.02.00.01",
   "force_update": "0",
   "description": "Flashforge configurations",
   "machine_model_list": [

resources/profiles/Flashforge/process/fdm_process_flashforge_common.json

@@ -13,7 +13,7 @@
     "compatible_printers_condition": "",
     "draft_shield": "disabled",
     "elefant_foot_compensation": "0.15",
-    "enable_arc_fitting": "1",
+    "enable_arc_fitting": "0",
     "outer_wall_acceleration": "5000",
     "wall_infill_order": "inner wall/outer wall/infill",
     "line_width": "0.42",

resources/profiles/FlyingBear.json

@@ -1,6 +1,6 @@
 {
     "name": "FlyingBear",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "1",
     "description": "FlyingBear configurations",
     "machine_model_list": [

resources/profiles/Folgertech.json

@@ -1,6 +1,6 @@
 {
     "name": "Folgertech",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Folgertech configurations",
     "machine_model_list": [

resources/profiles/Geeetech.json

@@ -1,6 +1,6 @@
 {
     "name": "Geeetech",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Geeetech configurations",
     "machine_model_list": [

resources/profiles/Ginger Additive.json

@@ -1,6 +1,6 @@
 {
   "name": "Ginger Additive",
-  "version": "02.02.00.00",
+  "version": "02.02.00.01",
   "force_update": "1",
   "description": "Ginger configuration",
   "machine_model_list": [

resources/profiles/InfiMech.json

@@ -1,6 +1,6 @@
 {
     "name": "InfiMech",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "1",
     "description": "InfiMech configurations",
     "machine_model_list": [

resources/profiles/Kingroon.json

@@ -1,7 +1,7 @@
 {
   "name": "Kingroon",
   "url": "https://kingroon.com/",
-  "version": "02.02.00.00",
+  "version": "02.02.00.01",
   "force_update": "0",
   "description": "Kingroon configuration files",
   "machine_model_list": [

resources/profiles/MagicMaker.json

@@ -1,6 +1,6 @@
 {
     "name": "MagicMaker",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "MagicMaker configurations",
     "machine_model_list": [

resources/profiles/Mellow.json

@@ -0,0 +1,162 @@
+{
+    "name": "Mellow",
+    "version": "02.02.00.01",
+    "force_update": "0",
+    "description": "Mellow Printer Profiles",
+    "machine_model_list": [
+        {
+            "name": "M1",
+            "sub_path": "machine/M1.json"
+        }
+    ],
+    "process_list": [
+        {
+            "name": "fdm_process_common",
+            "sub_path": "process/fdm_process_common.json"
+        },
+        {
+            "name": "fdm_process_M1_common",
+            "sub_path": "process/fdm_process_M1_common.json"
+        },
+        {
+            "name": "0.08mm Extra Fine @M1",
+            "sub_path": "process/0.08mm Extra Fine @M1.json"
+        },
+        {
+            "name": "0.12mm Fine @M1",
+            "sub_path": "process/0.12mm Fine @M1.json"
+        },
+        {
+            "name": "0.16mm Optimal @M1",
+            "sub_path": "process/0.16mm Optimal @M1.json"
+        },
+        {
+            "name": "0.20mm Standard @M1",
+            "sub_path": "process/0.20mm Standard @M1.json"
+        },
+        {
+            "name": "0.24mm Draft @M1",
+            "sub_path": "process/0.24mm Draft @M1.json"
+        },
+        {
+            "name": "0.28mm Extra Draft @M1",
+            "sub_path": "process/0.28mm Extra Draft @M1.json"
+        },
+        {
+            "name": "0.32mm Extra Draft @M1",
+            "sub_path": "process/0.32mm Extra Draft @M1.json"
+        },
+        {
+            "name": "0.40mm Extra Draft @M1",
+            "sub_path": "process/0.40mm Extra Draft @M1.json"
+        },
+        {
+            "name": "0.56mm Extra Draft @M1",
+            "sub_path": "process/0.56mm Extra Draft @M1.json"
+        }
+    ],
+    "filament_list": [
+        {
+            "name": "fdm_filament_common",
+            "sub_path": "filament/fdm_filament_common.json"
+        },
+        {
+            "name": "fdm_filament_pla",
+            "sub_path": "filament/fdm_filament_pla.json"
+        },
+        {
+            "name": "fdm_filament_tpu",
+            "sub_path": "filament/fdm_filament_tpu.json"
+        },
+        {
+            "name": "fdm_filament_pet",
+            "sub_path": "filament/fdm_filament_pet.json"
+        },
+        {
+            "name": "fdm_filament_abs",
+            "sub_path": "filament/fdm_filament_abs.json"
+        },
+        {
+            "name": "fdm_filament_pc",
+            "sub_path": "filament/fdm_filament_pc.json"
+        },
+        {
+            "name": "fdm_filament_asa",
+            "sub_path": "filament/fdm_filament_asa.json"
+        },
+        {
+            "name": "fdm_filament_pva",
+            "sub_path": "filament/fdm_filament_pva.json"
+        },
+        {
+            "name": "fdm_filament_pa",
+            "sub_path": "filament/fdm_filament_pa.json"
+        },
+        {
+            "name": "Generic PLA @M1",
+            "sub_path": "filament/Generic PLA @M1.json"
+        },
+        {
+            "name": "Generic PLA-CF @M1",
+            "sub_path": "filament/Generic PLA-CF @M1.json"
+        },
+        {
+            "name": "Generic PETG @M1",
+            "sub_path": "filament/Generic PETG @M1.json"
+        },
+        {
+            "name": "Generic ABS @M1",
+            "sub_path": "filament/Generic ABS @M1.json"
+        },
+        {
+            "name": "Generic TPU @M1",
+            "sub_path": "filament/Generic TPU @M1.json"
+        },
+        {
+            "name": "Generic ASA @M1",
+            "sub_path": "filament/Generic ASA @M1.json"
+        },
+        {
+            "name": "Generic PC @M1",
+            "sub_path": "filament/Generic PC @M1.json"
+        },
+        {
+            "name": "Generic PVA @M1",
+            "sub_path": "filament/Generic PVA @M1.json"
+        },
+        {
+            "name": "Generic PA @M1",
+            "sub_path": "filament/Generic PA @M1.json"
+        },
+        {
+            "name": "Generic PA-CF @M1",
+            "sub_path": "filament/Generic PA-CF @M1.json"
+        }
+    ],
+    "machine_list": [
+        {
+            "name": "fdm_machine_common",
+            "sub_path": "machine/fdm_machine_common.json"
+        },
+        {
+            "name": "fdm_common_M1",
+            "sub_path": "machine/fdm_common_M1.json"
+        },
+        {
+            "name": "M1 0.4 nozzle",
+            "sub_path": "machine/M1 0.4 nozzle.json"
+        },
+        {
+            "name": "M1 0.2 nozzle",
+            "sub_path": "machine/M1 0.2 nozzle.json"
+        },
+        {
+            "name": "M1 0.6 nozzle",
+            "sub_path": "machine/M1 0.6 nozzle.json"
+        },
+        {
+            "name": "M1 0.8 nozzle",
+            "sub_path": "machine/M1 0.8 nozzle.json"
+        }
+    ]
+}

resources/profiles/Mellow/filament/Generic ABS @M1.json

@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFB99_m1_0",
+    "name": "Generic ABS @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_abs",
+    "filament_flow_ratio": [
+        "0.926"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/filament/Generic ASA @M1.json

@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "filament_id": "GFB98",
+    "setting_id": "GFB98_m1_0",
+    "name": "Generic ASA @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_asa",
+    "filament_flow_ratio": [
+        "0.93"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/filament/Generic PA @M1.json

@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFN99",
+    "setting_id": "GFN99_m1_0",
+    "name": "Generic PA @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pa",
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/filament/Generic PA-CF @M1.json

@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFN98_m1_0",
+    "name": "Generic PA-CF @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pa",
+    "filament_type": [
+        "PA-CF"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/filament/Generic PC @M1.json

@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "filament_id": "GFC99",
+    "setting_id": "GFC99_m1_0",
+    "name": "Generic PC @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pc",
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ],
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/filament/Generic PETG @M1.json

@@ -0,0 +1,51 @@
+{
+    "type": "filament",
+    "filament_id": "GFG99",
+    "setting_id": "GFG99_m1_0",
+    "name": "Generic PETG @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pet",
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "fan_max_speed": [
+        "90"
+    ],
+    "fan_min_speed": [
+        "40"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "10"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/filament/Generic PLA @M1.json

@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFL99_m1_0",
+    "name": "Generic PLA @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pla",
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/filament/Generic PLA-CF @M1.json

@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFL98",
+    "setting_id": "GFL98_m1_0",
+    "name": "Generic PLA-CF @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pla",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_type": [
+        "PLA-CF"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/filament/Generic PVA @M1.json

@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFS99",
+    "setting_id": "GFS99_m1_0",
+    "name": "Generic PVA @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pva",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/filament/Generic TPU @M1.json

@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFU99",
+    "setting_id": "GFU99_m1_0",
+    "name": "Generic TPU @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_tpu",
+    "filament_max_volumetric_speed": [
+        "3.2"
+    ],
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/filament/fdm_filament_abs.json

@@ -0,0 +1,88 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_abs",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "105"
+    ],
+    "eng_plate_temp" : [
+        "105"
+    ],
+    "hot_plate_temp" : [
+        "105"
+    ],
+    "textured_plate_temp" : [
+        "105"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "filament_max_volumetric_speed": [
+        "28.6"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "temperature_vitrification": [
+        "110"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "3"
+    ]
+}

resources/profiles/Mellow/filament/fdm_filament_asa.json

@@ -0,0 +1,88 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_asa",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "105"
+    ],
+    "eng_plate_temp" : [
+        "105"
+    ],
+    "hot_plate_temp" : [
+        "105"
+    ],
+    "textured_plate_temp" : [
+        "105"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "105"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "35"
+    ],
+    "filament_max_volumetric_speed": [
+        "28.6"
+    ],
+    "filament_type": [
+        "ASA"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "temperature_vitrification": [
+        "110"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "3"
+    ]
+}

resources/profiles/Mellow/filament/fdm_filament_common.json

@@ -0,0 +1,144 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "cool_plate_temp" : [
+        "60"
+    ],
+    "eng_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "textured_plate_temp" : [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "0"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_max_volumetric_speed": [
+        "0"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_settings_id": [
+        ""
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_vendor": [
+        "Generic"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "35"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "nozzle_temperature": [
+        "200"
+    ],
+    "temperature_vitrification": [
+        "100"
+    ]
+}

resources/profiles/Mellow/filament/fdm_filament_pa.json

@@ -0,0 +1,85 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pa",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "0"
+    ],
+    "eng_plate_temp" : [
+        "100"
+    ],
+    "hot_plate_temp" : [
+        "100"
+    ],
+    "textured_plate_temp" : [
+        "100"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "4"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_type": [
+        "PA"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "290"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "overhang_fan_speed": [
+        "30"
+    ],
+    "nozzle_temperature": [
+        "290"
+    ],
+    "temperature_vitrification": [
+        "108"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "nozzle_temperature_range_high": [
+        "300"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ]
+}

resources/profiles/Mellow/filament/fdm_filament_pc.json

@@ -0,0 +1,88 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pc",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "0"
+    ],
+    "eng_plate_temp" : [
+        "110"
+    ],
+    "hot_plate_temp" : [
+        "110"
+    ],
+    "textured_plate_temp" : [
+        "110"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "110"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "110"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "110"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "filament_max_volumetric_speed": [
+        "23.2"
+    ],
+    "filament_type": [
+        "PC"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "overhang_fan_speed": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "temperature_vitrification": [
+        "140"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "nozzle_temperature_range_high": [
+        "280"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ]
+}

resources/profiles/Mellow/filament/fdm_filament_pet.json

@@ -0,0 +1,82 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pet",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "60"
+    ],
+    "eng_plate_temp" : [
+        "0"
+    ],
+    "hot_plate_temp" : [
+        "80"
+    ],
+    "textured_plate_temp" : [
+        "80"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "0"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "80"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "80"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "filament_max_volumetric_speed": [
+        "25"
+    ],
+    "filament_type": [
+        "PETG"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_cost": [
+        "30"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "255"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "temperature_vitrification": [
+        "80"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/Mellow/filament/fdm_filament_pla.json

@@ -0,0 +1,94 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pla",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "cool_plate_temp" : [
+        "60"
+    ],
+    "eng_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "textured_plate_temp" : [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/Mellow/filament/fdm_filament_pva.json

@@ -0,0 +1,100 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pva",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "35"
+    ],
+    "eng_plate_temp" : [
+        "0"
+    ],
+    "hot_plate_temp" : [
+        "45"
+    ],
+    "textured_plate_temp" : [
+        "45"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "35"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "0"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "45"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "45"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_soluble": [
+        "1"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_type": [
+        "PVA"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "temperature_vitrification": [
+        "50"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/Mellow/filament/fdm_filament_tpu.json

@@ -0,0 +1,88 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_tpu",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "cool_plate_temp" : [
+        "30"
+    ],
+    "eng_plate_temp" : [
+        "30"
+    ],
+    "hot_plate_temp" : [
+        "35"
+    ],
+    "textured_plate_temp" : [
+        "35"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "30"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "30"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "35"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "35"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_type": [
+        "TPU"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_low": [
+        "200"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/Mellow/machine/M1 0.2 nozzle.json

@@ -0,0 +1,26 @@
+{
+    "type": "machine",
+    "setting_id": "m1_m002",
+    "name": "M1 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_common_M1",
+    "printer_model": "M1",
+    "nozzle_diameter": [
+        "0.2"
+    ],
+    "max_layer_height": [
+        "0.16"
+    ],
+    "min_layer_height": [
+        "0.04"
+    ],
+    "printer_variant": "0.2",
+    "printable_area": [
+        "0x0",
+        "106x0",
+        "106x106",
+        "0x106"
+    ],
+    "printable_height": "100"
+}

resources/profiles/Mellow/machine/M1 0.4 nozzle.json

@@ -0,0 +1,20 @@
+{
+    "type": "machine",
+    "setting_id": "m1_m001",
+    "name": "M1 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_common_M1",
+    "printer_model": "M1",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "106x0",
+        "106x106",
+        "0x106"
+    ],
+    "printable_height": "100"
+}

resources/profiles/Mellow/machine/M1 0.6 nozzle.json

@@ -0,0 +1,26 @@
+{
+    "type": "machine",
+    "setting_id": "m1_m003",
+    "name": "M1 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_common_M1",
+    "printer_model": "M1",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "max_layer_height": [
+        "0.4"
+    ],
+    "min_layer_height": [
+        "0.12"
+    ],
+    "printer_variant": "0.6",
+    "printable_area": [
+        "0x0",
+        "106x0",
+        "106x106",
+        "0x106"
+    ],
+    "printable_height": "100"
+}

resources/profiles/Mellow/machine/M1 0.8 nozzle.json

@@ -0,0 +1,26 @@
+{
+    "type": "machine",
+    "setting_id": "m1_m004",
+    "name": "M1 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_common_M1",
+    "printer_model": "M1",
+    "nozzle_diameter": [
+        "0.8"
+    ],
+    "max_layer_height": [
+        "0.6"
+    ],
+    "min_layer_height": [
+        "0.2"
+    ],
+    "printer_variant": "0.8",
+    "printable_area": [
+        "0x0",
+        "106x0",
+        "106x106",
+        "0x106"
+    ],
+    "printable_height": "100"
+}

resources/profiles/Mellow/machine/M1.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "M1",
+    "model_id": "m1_1",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Mellow",
+    "bed_model": "M1_bed_model.stl",
+    "bed_texture": "mellow_bed_texture.png",
+    "hotend_model": "",
+    "default_materials": "Generic ABS @M1;Generic PLA @M1;Generic PLA-CF @M1;Generic PETG @M1;Generic TPU @M1;Generic ASA @M1;Generic PC @M1;Generic PVA @M1;Generic PA @M1;Generic PA-CF @M1"
+}

resources/profiles/Mellow/machine/fdm_common_M1.json

@@ -0,0 +1,60 @@
+{
+  "type": "machine",
+  "name": "fdm_common_M1",
+  "from": "system",
+  "instantiation": "false",
+  "inherits": "fdm_machine_common",
+  "gcode_flavor": "klipper",
+  "machine_max_acceleration_e": ["5000", "5000"],
+  "machine_max_acceleration_extruding": ["8000", "8000"],
+  "machine_max_acceleration_retracting": ["5000", "5000"],
+  "machine_max_acceleration_travel": ["8000", "8000"],
+  "machine_max_acceleration_x": ["8000", "8000"],
+  "machine_max_acceleration_y": ["8000", "8000"],
+  "machine_max_acceleration_z": ["500", "500"],
+  "machine_max_speed_e": ["25", "25"],
+  "machine_max_speed_x": ["420", "420"],
+  "machine_max_speed_y": ["420", "420"],
+  "machine_max_speed_z": ["12", "12"],
+  "machine_max_jerk_e": ["2.5", "2.5"],
+  "machine_max_jerk_x": ["12", "12"],
+  "machine_max_jerk_y": ["12", "12"],
+  "machine_max_jerk_z": ["0.2", "0.4"],
+  "machine_min_extruding_rate": ["0", "0"],
+  "machine_min_travel_rate": ["0", "0"],
+  "max_layer_height": ["0.32"],
+  "min_layer_height": ["0.08"],
+  "printable_height": "165",
+  "extruder_clearance_radius": "65",
+  "extruder_clearance_height_to_rod": "36",
+  "extruder_clearance_height_to_lid": "140",
+  "printer_settings_id": "",
+  "printer_technology": "FFF",
+  "printer_variant": "0.4",
+  "retraction_minimum_travel": ["1"],
+  "retract_before_wipe": ["70%"],
+  "retract_when_changing_layer": ["1"],
+  "retraction_length": ["2.9"],
+  "retract_length_toolchange": ["2"],
+  "z_hop": ["0.4"],
+  "retract_restart_extra": ["0"],
+  "retract_restart_extra_toolchange": ["0"],
+  "retraction_speed": ["50"],
+  "deretraction_speed": ["40"],
+  "z_hop_types": "Normal Lift",
+  "silent_mode": "0",
+  "single_extruder_multi_material": "1",
+  "change_filament_gcode": "",
+  "wipe": ["1"],
+  "default_filament_profile": ["Generic ABS @M1"],
+  "default_print_profile": "0.20mm Standard @M1",
+  "bed_exclude_area": ["0x0"],
+  "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
+  "machine_end_gcode": "PRINT_END",
+  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+  "machine_pause_gcode": "PAUSE",
+  "scan_first_layer": "0",
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0"
+}

resources/profiles/Mellow/machine/fdm_machine_common.json

@@ -0,0 +1,119 @@
+{
+    "type": "machine",
+    "name": "fdm_machine_common",
+    "from": "system",
+    "instantiation": "false",
+    "printer_technology": "FFF",
+    "deretraction_speed": [
+        "40"
+    ],
+    "extruder_colour": [
+        "#FCE94F"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "gcode_flavor": "marlin",
+    "silent_mode": "0",
+    "machine_max_acceleration_e": [
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "10000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000"
+    ],
+    "machine_max_acceleration_x": [
+        "10000"
+    ],
+    "machine_max_acceleration_y": [
+        "10000"
+    ],
+    "machine_max_acceleration_z": [
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "60"
+    ],
+    "machine_max_speed_x": [
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "10"
+    ],
+    "machine_max_jerk_e": [
+        "5"
+    ],
+    "machine_max_jerk_x": [
+        "8"
+    ],
+    "machine_max_jerk_y": [
+        "8"
+    ],
+    "machine_max_jerk_z": [
+        "0.4"
+    ],
+    "machine_min_extruding_rate": [
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printable_height": "165",
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_settings_id": "",
+    "printer_variant": "0.4",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "5"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "60"
+    ],
+    "single_extruder_multi_material": "1",
+    "change_filament_gcode": "",
+    "wipe": [
+        "1"
+    ],
+    "default_print_profile": "",
+    "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
+    "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+    "machine_pause_gcode": "M601"
+}

resources/profiles/Mellow/process/0.08mm Extra Fine @M1.json

@@ -0,0 +1,19 @@
+{
+    "type": "process",
+    "setting_id": "m1_p001",
+    "name": "0.08mm Extra Fine @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_M1_common",
+    "layer_height": "0.08",
+    "bottom_shell_layers": "7",
+    "top_shell_layers": "9",
+    "support_top_z_distance": "0.08",
+    "support_bottom_z_distance": "0.08",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle"
+    ]
+}

resources/profiles/Mellow/process/0.12mm Fine @M1.json

@@ -0,0 +1,19 @@
+{
+    "type": "process",
+    "setting_id": "m1_p002",
+    "name": "0.12mm Fine @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_M1_common",
+    "layer_height": "0.12",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "6",
+    "support_top_z_distance": "0.08",
+    "support_bottom_z_distance": "0.08",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle"
+    ]
+}

resources/profiles/Mellow/process/0.16mm Optimal @M1.json

@@ -0,0 +1,20 @@
+{
+    "type": "process",
+    "setting_id": "m1_p003",
+    "name": "0.16mm Optimal @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_M1_common",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "5",
+    "support_top_z_distance": "0.16",
+    "support_bottom_z_distance": "0.16",
+    "layer_height": "0.16",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.2 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/process/0.20mm Standard @M1.json

@@ -0,0 +1,14 @@
+{
+    "type": "process",
+    "setting_id": "m1_p004",
+    "name": "0.20mm Standard @M1",
+    "from": "system",
+    "inherits": "fdm_process_M1_common",
+    "instantiation": "true",
+    "layer_height": "0.2",
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/process/0.24mm Draft @M1.json

@@ -0,0 +1,17 @@
+{
+    "type": "process",
+    "setting_id": "m1_p005",
+    "name": "0.24mm Draft @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_M1_common",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "layer_height": "0.24",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/process/0.28mm Extra Draft @M1.json

@@ -0,0 +1,15 @@
+{
+    "type": "process",
+    "setting_id": "m1_p006",
+    "name": "0.28mm Extra Draft @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_M1_common",
+    "layer_height": "0.28",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/process/0.32mm Extra Draft @M1.json

@@ -0,0 +1,17 @@
+{
+  "type": "process",
+  "setting_id": "m1_p007",
+  "name": "0.32mm Standard @M1",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_M1_common",
+  "support_top_z_distance": "0.24",
+  "support_bottom_z_distance": "0.24",
+  "layer_height": "0.32",
+  "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "M1 0.4 nozzle",
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/process/0.40mm Extra Draft @M1.json

@@ -0,0 +1,16 @@
+{
+  "type": "process",
+  "setting_id": "m1_p008",
+  "name": "0.40mm Standard @M1",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_M1_common",
+  "support_top_z_distance": "0.24",
+  "support_bottom_z_distance": "0.24",
+  "layer_height": "0.40",
+  "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "M1 0.6 nozzle",
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/process/0.56mm Extra Draft @M1.json

@@ -0,0 +1,15 @@
+{
+    "type": "process",
+    "setting_id": "m1_p009",
+    "name": "0.56mm Standard @M1",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_M1_common",
+    "support_top_z_distance": "0.24",
+    "support_bottom_z_distance": "0.24",
+    "layer_height": "0.56",
+    "initial_layer_print_height": "0.2",
+    "compatible_printers": [
+        "M1 0.8 nozzle"
+    ]
+}

resources/profiles/Mellow/process/fdm_process_M1_common.json

@@ -0,0 +1,30 @@
+{
+    "type": "process",
+    "name": "fdm_process_M1_common",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_common",
+    "default_acceleration": "6000",
+    "top_surface_acceleration": "3000",
+    "travel_acceleration": "6000",
+    "inner_wall_acceleration": "5000",
+    "outer_wall_acceleration": "3000",
+    "initial_layer_acceleration": "1000",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "105",
+    "outer_wall_speed": "200",
+    "inner_wall_speed": "250",
+    "internal_solid_infill_speed": "280",
+    "top_surface_speed": "200",
+    "gap_infill_speed": "200",
+    "sparse_infill_speed": "300",
+    "travel_speed": "400",
+    "travel_jerk": "12",
+    "outer_wall_jerk": "7",
+    "inner_wall_jerk": "7",
+    "default_jerk": "0",
+    "infill_jerk": "12",
+    "top_surface_jerk": "7",
+    "initial_layer_jerk": "7",
+    "exclude_object": "1"
+}

resources/profiles/Mellow/process/fdm_process_common.json

@@ -0,0 +1,109 @@
+{
+    "type": "process",
+    "name": "fdm_process_common",
+    "from": "system",
+    "instantiation": "false",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "max_travel_detour_distance": "0",
+    "bottom_surface_pattern": "monotonic",
+    "bottom_shell_thickness": "0",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "70",
+    "brim_width": "5",
+    "brim_object_gap": "0.1",
+    "compatible_printers": [],
+    "compatible_printers_condition": "",
+    "print_sequence": "by layer",
+    "default_acceleration": "1000",
+    "initial_layer_acceleration": "500",
+    "top_surface_acceleration": "1000",
+    "travel_acceleration": "1000",
+    "inner_wall_acceleration": "1000",
+    "outer_wall_acceleration": "700",
+    "bridge_no_support": "0",
+    "draft_shield": "disabled",
+    "elefant_foot_compensation": "0",
+    "enable_arc_fitting": "0",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "infill_direction": "45",
+    "sparse_infill_density": "15%",
+    "sparse_infill_pattern": "crosshatch",
+    "initial_layer_print_height": "0.2",
+    "infill_combination": "0",
+    "infill_wall_overlap": "25%",
+    "interface_shells": "0",
+    "ironing_flow": "10%",
+    "ironing_spacing": "0.15",
+    "ironing_speed": "30",
+    "ironing_type": "no ironing",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
+    "detect_overhang_wall": "1",
+    "slowdown_for_curled_perimeters": "1",
+    "overhang_1_4_speed": "0",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "line_width": "110%",
+    "inner_wall_line_width": "110%",
+    "outer_wall_line_width": "100%",
+    "top_surface_line_width": "93.75%",
+    "sparse_infill_line_width": "110%",
+    "initial_layer_line_width": "120%",
+    "internal_solid_infill_line_width": "120%",
+    "support_line_width": "96%",
+    "wall_loops": "3",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "skirt_distance": "2",
+    "skirt_height": "3",
+    "min_skirt_length": "4",
+    "skirt_loops": "0",
+    "minimum_sparse_infill_area": "15",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "resolution": "0.012",
+    "support_type": "normal(auto)",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0.2",
+    "support_bottom_z_distance": "0.2",
+    "support_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_filament": "0",
+    "support_interface_top_layers": "2",
+    "support_interface_bottom_layers": "2",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": "80",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_speed": "150",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.35",
+    "tree_support_branch_angle": "30",
+    "tree_support_wall_count": "0",
+    "tree_support_with_infill": "0",
+    "detect_thin_wall": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_shell_thickness": "0.8",
+    "enable_prime_tower": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "prime_tower_width": "60",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "layer_height": "0.2",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "4",
+    "bridge_flow": "1",
+    "initial_layer_speed": "45",
+    "initial_layer_infill_speed": "45",
+    "outer_wall_speed": "45",
+    "inner_wall_speed": "80",
+    "sparse_infill_speed": "150",
+    "internal_solid_infill_speed": "150",
+    "top_surface_speed": "50",
+    "gap_infill_speed": "30",
+    "travel_speed": "200"
+}

resources/profiles/OrcaArena.json

@@ -1,7 +1,7 @@
 {
     "name": "Orca Arena Printer",
     "url": "",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Orca Arena configuration files",
     "machine_model_list": [

resources/profiles/Peopoly.json

@@ -1,6 +1,6 @@
 {
     "name": "Peopoly",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Peopoly configurations",
     "machine_model_list": [

resources/profiles/Positron3D.json

@@ -1,6 +1,6 @@
 {
     "name": "Positron 3D",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Positron 3D Printer Profile",
     "machine_model_list": [

resources/profiles/Prusa.json

@@ -1,6 +1,6 @@
 {
     "name": "Prusa",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Prusa configurations",
     "machine_model_list": [

resources/profiles/Qidi.json

@@ -1,9 +1,13 @@
 {
     "name": "Qidi",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Qidi configurations",
     "machine_model_list": [
+        {
+            "name": "Qidi X-Plus 4",
+            "sub_path": "machine/Qidi X-Plus 4.json"
+        },
         {
             "name": "Qidi Q1 Pro",
             "sub_path": "machine/Qidi Q1 Pro.json"
@@ -138,6 +142,10 @@
             "name": "0.12mm Fine @Qidi Q1 Pro",
             "sub_path": "process/0.12mm Fine @Qidi Q1 Pro.json"
         },
+        {
+            "name": "0.12mm Fine @Qidi XPlus4",
+            "sub_path": "process/0.12mm Fine @Qidi XPlus4.json"
+        },
         {
             "name": "0.16mm Optimal @Qidi X3",
             "sub_path": "process/0.16mm Optimal @Qidi X3.json"
@@ -170,6 +178,10 @@
             "name": "0.16mm Optimal @Qidi Q1 Pro",
             "sub_path": "process/0.16mm Optimal @Qidi Q1 Pro.json"
         },
+        {
+            "name": "0.16mm Optimal @Qidi XPlus4",
+            "sub_path": "process/0.16mm Optimal @Qidi XPlus4.json"
+        },
         {
             "name": "0.20mm Standard @Qidi X3",
             "sub_path": "process/0.20mm Standard @Qidi X3.json"
@@ -202,6 +214,10 @@
             "name": "0.20mm Standard @Qidi Q1 Pro",
             "sub_path": "process/0.20mm Standard @Qidi Q1 Pro.json"
         },
+        {
+            "name": "0.20mm Standard @Qidi XPlus4",
+            "sub_path": "process/0.20mm Standard @Qidi XPlus4.json"
+        },
         {
             "name": "0.24mm Draft @Qidi X3",
             "sub_path": "process/0.24mm Draft @Qidi X3.json"
@@ -234,6 +250,10 @@
             "name": "0.24mm Draft @Qidi Q1 Pro",
             "sub_path": "process/0.24mm Draft @Qidi Q1 Pro.json"
         },
+        {
+            "name": "0.24mm Draft @Qidi XPlus4",
+            "sub_path": "process/0.24mm Draft @Qidi XPlus4.json"
+        },
         {
             "name": "0.28mm Extra Draft @Qidi X3",
             "sub_path": "process/0.28mm Extra Draft @Qidi X3.json"
@@ -266,6 +286,30 @@
             "name": "0.28mm Extra Draft @Qidi Q1 Pro",
             "sub_path": "process/0.28mm Extra Draft @Qidi Q1 Pro.json"
         },
+        {
+            "name": "0.28mm Extra Draft @Qidi XPlus4",
+            "sub_path": "process/0.28mm Extra Draft @Qidi XPlus4.json"
+        },
+        {
+            "name": "0.06mm Standard @Qidi XPlus4 0.2 nozzle",
+            "sub_path": "process/0.06mm Standard @Qidi XPlus4 0.2 nozzle.json"
+        },
+        {
+            "name": "0.08mm Standard @Qidi XPlus4 0.2 nozzle",
+            "sub_path": "process/0.08mm Standard @Qidi XPlus4 0.2 nozzle.json"
+        },
+        {
+            "name": "0.10mm Standard @Qidi XPlus4 0.2 nozzle",
+            "sub_path": "process/0.10mm Standard @Qidi XPlus4 0.2 nozzle.json"
+        },
+        {
+            "name": "0.12mm Standard @Qidi XPlus4 0.2 nozzle",
+            "sub_path": "process/0.12mm Standard @Qidi XPlus4 0.2 nozzle.json"
+        },
+        {
+            "name": "0.14mm Standard @Qidi XPlus4 0.2 nozzle",
+            "sub_path": "process/0.14mm Standard @Qidi XPlus4 0.2 nozzle.json"
+        },
         {
             "name": "0.06mm Standard @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "process/0.06mm Standard @Qidi Q1 Pro 0.2 nozzle.json"
@@ -346,6 +390,26 @@
             "name": "0.14mm Standard @Qidi XSmart3 0.2 nozzle",
             "sub_path": "process/0.14mm Standard @Qidi XSmart3 0.2 nozzle.json"
         },
+        {
+            "name": "0.18mm Standard @Qidi XPlus4 0.6 nozzle",
+            "sub_path": "process/0.18mm Standard @Qidi XPlus4 0.6 nozzle.json"
+        },
+        {
+            "name": "0.24mm Standard @Qidi XPlus4 0.6 nozzle",
+            "sub_path": "process/0.24mm Standard @Qidi XPlus4 0.6 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @Qidi XPlus4 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @Qidi XPlus4 0.6 nozzle.json"
+        },
+        {
+            "name": "0.36mm Standard @Qidi XPlus4 0.6 nozzle",
+            "sub_path": "process/0.36mm Standard @Qidi XPlus4 0.6 nozzle.json"
+        },
+        {
+            "name": "0.42mm Standard @Qidi XPlus4 0.6 nozzle",
+            "sub_path": "process/0.42mm Standard @Qidi XPlus4 0.6 nozzle.json"
+        },
         {
             "name": "0.18mm Standard @Qidi Q1 Pro 0.6 nozzle",
             "sub_path": "process/0.18mm Standard @Qidi Q1 Pro 0.6 nozzle.json"
@@ -426,6 +490,26 @@
             "name": "0.42mm Standard @Qidi XSmart3 0.6 nozzle",
             "sub_path": "process/0.42mm Standard @Qidi XSmart3 0.6 nozzle.json"
         },
+        {
+            "name": "0.24mm Standard @Qidi XPlus4 0.8 nozzle",
+            "sub_path": "process/0.24mm Standard @Qidi XPlus4 0.8 nozzle.json"
+        },
+        {
+            "name": "0.32mm Standard @Qidi XPlus4 0.8 nozzle",
+            "sub_path": "process/0.32mm Standard @Qidi XPlus4 0.8 nozzle.json"
+        },
+        {
+            "name": "0.40mm Standard @Qidi XPlus4 0.8 nozzle",
+            "sub_path": "process/0.40mm Standard @Qidi XPlus4 0.8 nozzle.json"
+        },
+        {
+            "name": "0.48mm Standard @Qidi XPlus4 0.8 nozzle",
+            "sub_path": "process/0.48mm Standard @Qidi XPlus4 0.8 nozzle.json"
+        },
+        {
+            "name": "0.56mm Standard @Qidi XPlus4 0.8 nozzle",
+            "sub_path": "process/0.56mm Standard @Qidi XPlus4 0.8 nozzle.json"
+        },
         {
             "name": "0.24mm Standard @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "process/0.24mm Standard @Qidi Q1 Pro 0.8 nozzle.json"
@@ -548,6 +632,22 @@
             "name": "Qidi Generic ABS",
             "sub_path": "filament/Qidi Generic ABS.json"
         },
+        {
+            "name": "Qidi Generic ABS @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/Qidi Generic ABS @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic ABS @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Qidi Generic ABS @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic ABS @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/Qidi Generic ABS @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic ABS @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Qidi Generic ABS @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle.json"
@@ -580,6 +680,22 @@
             "name": "Qidi Generic PETG",
             "sub_path": "filament/Qidi Generic PETG.json"
         },
+        {
+            "name": "Qidi Generic PETG @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/Qidi Generic PETG @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic PETG @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Qidi Generic PETG @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic PETG @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/Qidi Generic PETG @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic PETG @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Qidi Generic PETG @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle.json"
@@ -612,6 +728,22 @@
             "name": "Qidi Generic PLA",
             "sub_path": "filament/Qidi Generic PLA.json"
         },
+        {
+            "name": "Qidi Generic PLA @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/Qidi Generic PLA @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic PLA @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Qidi Generic PLA @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic PLA @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/Qidi Generic PLA @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic PLA @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Qidi Generic PLA @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle.json"
@@ -644,6 +776,10 @@
             "name": "Qidi Generic TPU 95A",
             "sub_path": "filament/Qidi Generic TPU 95A.json"
         },
+        {
+            "name": "Qidi Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Qidi Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Qidi Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/Qidi Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json"
@@ -652,6 +788,22 @@
             "name": "QIDI ABS Odorless",
             "sub_path": "filament/QIDI ABS Odorless.json"
         },
+        {
+            "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI ABS Odorless @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ABS Odorless @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Odorless @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS Odorless @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ABS Odorless @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/QIDI ABS Odorless @Qidi Q1 Pro 0.2 nozzle.json"
@@ -672,6 +824,10 @@
             "name": "QIDI ABS Odorless @0.2 nozzle",
             "sub_path": "filament/QIDI ABS Odorless @0.2 nozzle.json"
         },
+        {
+            "name": "QIDI ABS Odorless @0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Odorless @0.6 nozzle.json"
+        },
         {
             "name": "QIDI ABS Odorless @0.8 nozzle",
             "sub_path": "filament/QIDI ABS Odorless @0.8 nozzle.json"
@@ -680,6 +836,22 @@
             "name": "QIDI ABS Rapido",
             "sub_path": "filament/QIDI ABS Rapido.json"
         },
+        {
+            "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ABS Rapido @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/QIDI ABS Rapido @Qidi Q1 Pro 0.2 nozzle.json"
@@ -700,6 +872,10 @@
             "name": "QIDI ABS Rapido 0.2 nozzle",
             "sub_path": "filament/QIDI ABS Rapido 0.2 nozzle.json"
         },
+        {
+            "name": "QIDI ABS Rapido 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido 0.6 nozzle.json"
+        },
         {
             "name": "QIDI ABS Rapido 0.8 nozzle",
             "sub_path": "filament/QIDI ABS Rapido 0.8 nozzle.json"
@@ -708,6 +884,18 @@
             "name": "QIDI ABS-GF25",
             "sub_path": "filament/QIDI ABS-GF25.json"
         },
+        {
+            "name": "QIDI ABS-GF25 @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ABS-GF25 @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS-GF25 @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS-GF25 @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS-GF25 @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS-GF25 @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/QIDI ABS-GF25 @Qidi Q1 Pro 0.4 nozzle.json"
@@ -724,6 +912,22 @@
             "name": "QIDI ASA",
             "sub_path": "filament/QIDI ASA.json"
         },
+        {
+            "name": "QIDI ASA @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI ASA @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI ASA @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ASA @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ASA @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ASA @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ASA @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ASA @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ASA @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json"
@@ -756,6 +960,10 @@
             "name": "Qidi ASA-Aero",
             "sub_path": "filament/Qidi ASA-Aero.json"
         },
+        {
+            "name": "Qidi ASA-Aero @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Qidi ASA-Aero @Qidi X-Plus 4 0.4 nozzle.json"
+        },
         {
             "name": "Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/Qidi ASA-Aero @Qidi Q1 Pro 0.4 nozzle.json"
@@ -764,6 +972,18 @@
             "name": "QIDI PA12-CF",
             "sub_path": "filament/QIDI PA12-CF.json"
         },
+        {
+            "name": "QIDI PA12-CF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PA12-CF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PA12-CF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PA12-CF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PA12-CF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PA12-CF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PA12-CF @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/QIDI PA12-CF @Qidi Q1 Pro 0.4 nozzle.json"
@@ -780,6 +1000,18 @@
             "name": "QIDI PAHT-CF",
             "sub_path": "filament/QIDI PAHT-CF.json"
         },
+        {
+            "name": "QIDI PAHT-CF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PAHT-CF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PAHT-CF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PAHT-CF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PAHT-CF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PAHT-CF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle.json"
@@ -796,6 +1028,18 @@
             "name": "Qidi PC-ABS-FR",
             "sub_path": "filament/Qidi PC-ABS-FR.json"
         },
+        {
+            "name": "Qidi PC-ABS-FR @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Qidi PC-ABS-FR @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Qidi PC-ABS-FR @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/Qidi PC-ABS-FR @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "Qidi PC-ABS-FR @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Qidi PC-ABS-FR @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/Qidi PC-ABS-FR @Qidi Q1 Pro 0.4 nozzle.json"
@@ -812,6 +1056,18 @@
             "name": "QIDI PET-CF",
             "sub_path": "filament/QIDI PET-CF.json"
         },
+        {
+            "name": "QIDI PET-CF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PET-CF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PET-CF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PET-CF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PET-CF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PET-CF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle.json"
@@ -828,6 +1084,22 @@
             "name": "QIDI PETG Tough",
             "sub_path": "filament/QIDI PETG Tough.json"
         },
+        {
+            "name": "QIDI PETG Tough @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI PETG Tough @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PETG Tough @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PETG Tough @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PETG Tough @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PETG Tough @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle.json"
@@ -860,6 +1132,22 @@
             "name": "QIDI PLA Rapido",
             "sub_path": "filament/QIDI PLA Rapido.json"
         },
+        {
+            "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json"
@@ -892,6 +1180,22 @@
             "name": "QIDI PLA Rapido Matte",
             "sub_path": "filament/QIDI PLA Rapido Matte.json"
         },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle.json"
@@ -924,6 +1228,18 @@
             "name": "Qidi PLA-CF",
             "sub_path": "filament/Qidi PLA-CF.json"
         },
+        {
+            "name": "QIDI PLA-CF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PLA-CF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA-CF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA-CF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA-CF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA-CF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle.json"
@@ -948,6 +1264,18 @@
             "name": "QIDI PA-Ultra",
             "sub_path": "filament/QIDI PA-Ultra.json"
         },
+        {
+            "name": "QIDI PA-Ultra @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PA-Ultra @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PA-Ultra @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PA-Ultra @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PA-Ultra @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PA-Ultra @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json"
@@ -964,6 +1292,18 @@
             "name": "QIDI ABS-GF10",
             "sub_path": "filament/QIDI ABS-GF10.json"
         },
+        {
+            "name": "QIDI ABS-GF10 @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ABS-GF10 @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS-GF10 @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS-GF10 @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS-GF10 @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS-GF10 @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/QIDI ABS-GF10 @Qidi Q1 Pro 0.4 nozzle.json"
@@ -984,6 +1324,10 @@
             "name": "Qidi Generic TPU",
             "sub_path": "filament/Qidi Generic TPU.json"
         },
+        {
+            "name": "Qidi Generic TPU @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Qidi Generic TPU @Qidi X-Plus 4 0.4 nozzle.json"
+        },
         {
             "name": "Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle.json"
@@ -992,6 +1336,22 @@
             "name": "Qidi Generic ASA",
             "sub_path": "filament/Qidi Generic ASA.json"
         },
+        {
+            "name": "Qidi Generic ASA @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/Qidi Generic ASA @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic ASA @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Qidi Generic ASA @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic ASA @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/Qidi Generic ASA @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "Qidi Generic ASA @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Qidi Generic ASA @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle.json"
@@ -1040,6 +1400,10 @@
             "name": "Qidi Generic PLA Silk",
             "sub_path": "filament/Qidi Generic PLA Silk.json"
         },
+        {
+            "name": "Qidi Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Qidi Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json"
+        },
         {
             "name": "Qidi Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/Qidi Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json"
@@ -1052,6 +1416,18 @@
             "name": "QIDI ABS-GF",
             "sub_path": "filament/QIDI ABS-GF.json"
         },
+        {
+            "name": "QIDI ABS-GF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ABS-GF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS-GF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS-GF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS-GF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS-GF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ABS-GF @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/QIDI ABS-GF @Qidi Q1 Pro 0.4 nozzle.json"
@@ -1072,6 +1448,14 @@
             "name": "Qidi TPU 95A-HF",
             "sub_path": "filament/Qidi TPU 95A-HF.json"
         },
+        {
+            "name": "Qidi TPU 95A-HF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Qidi TPU 95A-HF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Qidi TPU 95A-HF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Qidi TPU 95A-HF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.4 nozzle.json"
@@ -1079,6 +1463,34 @@
         {
             "name": "Qidi TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/Qidi TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF",
+            "sub_path": "filament/QIDI PPS-CF.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi Q1 Pro 0.4 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi Q1 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi Q1 Pro 0.6 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi Q1 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi Q1 Pro 0.8 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi Q1 Pro 0.8 nozzle.json"
         }
     ],
     "machine_list": [
@@ -1122,6 +1534,10 @@
             "name": "Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "machine/Qidi Q1 Pro 0.4 nozzle.json"
         },
+        {
+            "name": "Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "machine/Qidi X-Plus 4 0.4 nozzle.json"
+        },
         {
             "name": "Qidi X-Smart 3 0.6 nozzle",
             "sub_path": "machine/Qidi X-Smart 3 0.6 nozzle.json"
@@ -1138,6 +1554,10 @@
             "name": "Qidi Q1 Pro 0.6 nozzle",
             "sub_path": "machine/Qidi Q1 Pro 0.6 nozzle.json"
         },
+        {
+            "name": "Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "machine/Qidi X-Plus 4 0.6 nozzle.json"
+        },
         {
             "name": "Qidi X-Smart 3 0.8 nozzle",
             "sub_path": "machine/Qidi X-Smart 3 0.8 nozzle.json"
@@ -1154,6 +1574,10 @@
             "name": "Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "machine/Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "machine/Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Qidi X-Smart 3 0.2 nozzle",
             "sub_path": "machine/Qidi X-Smart 3 0.2 nozzle.json"
@@ -1169,6 +1593,10 @@
         {
             "name": "Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "machine/Qidi Q1 Pro 0.2 nozzle.json"
+        },
+        {
+            "name": "Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "machine/Qidi X-Plus 4 0.2 nozzle.json"
         }
     ]
 }

resources/profiles/Qidi/filament/QIDI ABS Odorless @0.6 nozzle.json

@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "name": "QIDI ABS Odorless @0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Odorless",
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.014"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.6 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+		"Qidi X-Smart 3 0.6 nozzle",
+		"Qidi X-Plus 3 0.6 nozzle",
+		"Qidi X-Max 3 0.6 nozzle"
+	]
+}

resources/profiles/Qidi/filament/QIDI ABS Odorless @0.8 nozzle.json

@@ -13,13 +13,13 @@
         "1"
     ],
     "pressure_advance": [
-        "0.021"
+        "0.011"
     ],
     "filament_max_volumetric_speed": [
         "22"
     ],
     "nozzle_temperature": [
-        "270"
+        "260"
     ],
     "slow_down_min_speed": [
         "10"

resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.2 nozzle.json

@@ -4,7 +4,7 @@
     "setting_id": "GFSA04",
     "instantiation": "true",
     "activate_air_filtration":[
-         "0"
+         "1"
     ],
     "during_print_exhaust_fan_speed":[
          "0"
@@ -38,7 +38,7 @@
         "260"
     ],
     "overhang_fan_speed": [
-        "100"
+        "80"
     ],
     "pressure_advance": [
         "0.021"

resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle.json

@@ -3,9 +3,6 @@
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
     "instantiation": "true",
-    "activate_air_filtration":[
-         "0"
-    ],
     "during_print_exhaust_fan_speed":[
          "0"
     ],
@@ -25,7 +22,7 @@
         "80"
     ],
     "filament_max_volumetric_speed": [
-        "24.5"
+        "22"
     ],
     "from": "system",
     "hot_plate_temp_initial_layer": [
@@ -38,10 +35,10 @@
         "260"
     ],
     "overhang_fan_speed": [
-        "100"
+        "80"
     ],
     "pressure_advance": [
-        "0.035"
+        "0.023"
     ],
     "slow_down_min_speed": [
         "20"