Qidi: re-mint copy-pasted filament_ids per material family

Phase 2 of the filament_id cleanup, worst vendor first (97 collision groups,
the GFB99/GFG99/GFL99 copy-paste epidemic). 435 in-place filament_id edits +
5 compatible_printers trims (broader 0.2-nozzle PETG presets over-claiming
Qidi Q1 Pro 0.2 nozzle, covered by dedicated variants):

- The Bambu-catalog generic owners keep their ids byte-identical (Qidi
  Generic ABS/PETG/PLA/TPU/PA/PA-CF/PLA-CF); 6 stray members inside owner
  families are aligned to their family id.
- 64 brand/product-line families (Bambu/HATCHBOX/Overture/PolyLite/Tinmorry,
  QIDI-brand lines, PLA+/High Speed/TPU-95A) get fresh deterministic mints,
  the same id landing in every per-series root of a family
  (@Q2-Series/@Q2C-Series/@X-Max 4-Series bases are multi-root families).
- QD_* device-protocol ids untouched (frozen contract with QidiPrinterAgent).

Verified: config-equivalence gate zero unexpected diffs (5892 presets);
orca_extra_profile_check.py exit 0; assign_filament_ids.py --check exit 0;
validator -l 2 exit 0; extended -f -v Qidi exit 0 (was 97 groups);
-r -v Qidi exit 0 (all references still resolve).

resources/profiles/Qidi/filament/Bambu ABS @0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "UWRDko6WCvXczl33",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Bambu ABS @0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "LUEO7LVrgko3oXzg",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/Bambu ABS @0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "NKhfqNQIcfKQBYAK",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "sZn12as9SQDNFDO3",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "coopc46hemdV9QIv",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"0"

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "qvYl7pfvtgF2y25O",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Bambu ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "AzHGQIE0dGXjOhqG",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "CoYm8sbAVmpmJNIV",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "FnQb4cNqORpQ3Wkq",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "94qvrRFOKOACTK2g",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Bambu ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu ABS",
 	"from": "system",
 	"setting_id": "ehJ163zLubzIrWzf",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Bambu ABS.json

@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "aZylcH8GeCJOqtTy",
-	"filament_id": "GFB99",
+	"filament_id": "OFuidAEg",
 	"instantiation": "true",
 	"filament_type": [
 		"ABS"

resources/profiles/Qidi/filament/Bambu PETG @0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "cZhyWv8zbkM3fgAS",
-	"filament_id": "GFG99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"
@@ -48,7 +48,6 @@
 	"compatible_printers": [
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
-		"Qidi X-Max 3 0.2 nozzle",
+		"Qidi X-Max 3 0.2 nozzle"
-		"Qidi Q1 Pro 0.2 nozzle"
 	]
 }

resources/profiles/Qidi/filament/Bambu PETG @0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "PfIdpsKf0Xw5admE",
-	"filament_id": "GFG99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"

resources/profiles/Qidi/filament/Bambu PETG @0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "czi4981YiirKP6Yy",
-	"filament_id": "GFG99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "1BV8aedNHRa3h7rp",
-	"filament_id": "GFB99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "eNHYNrSKn90P4GdZ",
-	"filament_id": "GFB99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "VU3PW2x6pfQ9Ayqo",
-	"filament_id": "GFB99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/Bambu PETG @Qidi Q1 Pro 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "2ezevTOIexxkTBJ2",
-	"filament_id": "GFB99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "2vTNJwgFvUFq7oS9",
-	"filament_id": "GFB99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "Q5ToVl9Yb4GGoNXC",
-	"filament_id": "GFB99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "XpLJtB1WhRyb1C75",
-	"filament_id": "GFB99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/Bambu PETG @Qidi X-Plus 4 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PETG",
 	"from": "system",
 	"setting_id": "PiYLOckPVRFKFTS6",
-	"filament_id": "GFB99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/Bambu PETG.json

@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "5ZkReXpCOi19xuJg",
-	"filament_id": "GFG99",
+	"filament_id": "OF6EOy1A",
 	"instantiation": "true",
 	"filament_type": [
 		"PETG"

resources/profiles/Qidi/filament/Bambu PLA @0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "xY62JrDaYjjSb3lh",
-	"filament_id": "GFL99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"

resources/profiles/Qidi/filament/Bambu PLA @0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "HjjvZoWwpjZ2gwDO",
-	"filament_id": "GFL99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"

resources/profiles/Qidi/filament/Bambu PLA @0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "5dZqeodmshu33k4e",
-	"filament_id": "GFL99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "6kHEv9BjLlJi4E9T",
-	"filament_id": "GFB99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "G28Bah0iOaahWlPE",
-	"filament_id": "GFB99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "ioH4lDHLbCw65TIg",
-	"filament_id": "GFB99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Bambu PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "oAUHAhSZkmCjhJEP",
-	"filament_id": "GFB99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "mT6I8HUJsMgYCjb4",
-	"filament_id": "GFB99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "5sr5ABQQzrYFUxtk",
-	"filament_id": "GFB99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "CNzhUsHWT2FOW2Qe",
-	"filament_id": "GFB99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Bambu PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Bambu PLA",
 	"from": "system",
 	"setting_id": "8Mosuf8MExl0g3Tz",
-	"filament_id": "GFB99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Bambu PLA.json

@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "lweaPojzNVU2FJnO",
-	"filament_id": "GFL99",
+	"filament_id": "OF2UFmOo",
 	"instantiation": "true",
 	"filament_type": [
 		"PLA"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "QASmOwd2vpLRwI9I",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "FETCvNKTRyxJujEs",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "ywzSdHmCxIwmIFVS",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "EwhasEiqLRcN5gBN",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "0NVX3dTScYTIebm3",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"0"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "HCU0TmDPYF39Gc3X",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "Pf6oZn5QrYSbJhdm",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "6LSdExBaTT0Mc3rY",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "vc2R90RYyDuY8vQn",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "1HVRVgHeXWVj3T0v",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX ABS @Qidi",
 	"from": "system",
 	"setting_id": "aJxjGxHK8UJOqYPV",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi.json

@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "0fchNQsqRqwI6whN",
-	"filament_id": "GFB99",
+	"filament_id": "OFPwi9X0",
 	"instantiation": "true",
 	"filament_type": [
 		"ABS"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "Cw3CaLrsjVfJKoWI",
-	"filament_id": "GFG99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"
@@ -48,7 +48,6 @@
 	"compatible_printers": [
 		"Qidi X-Smart 3 0.2 nozzle",
 		"Qidi X-Plus 3 0.2 nozzle",
-		"Qidi X-Max 3 0.2 nozzle",
+		"Qidi X-Max 3 0.2 nozzle"
-		"Qidi Q1 Pro 0.2 nozzle"
 	]
 }

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "eLmXN4kJvaoq5Ude",
-	"filament_id": "GFG99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "mndT3gxOniftGEEZ",
-	"filament_id": "GFG99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "L8aHH2WqnlOYuyfd",
-	"filament_id": "GFB99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "LMva5CR9m19UAhcI",
-	"filament_id": "GFB99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "5EfWTFx0dXRTREkj",
-	"filament_id": "GFB99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "xeu1S6h53DRVM9Pw",
-	"filament_id": "GFB99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "UrZzA62PJDuvo9EC",
-	"filament_id": "GFB99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "jAykaomjQ4BS9Cg0",
-	"filament_id": "GFB99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "2QrBYfeT0mp048aY",
-	"filament_id": "GFB99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PETG @Qidi",
 	"from": "system",
 	"setting_id": "9otX3aWO4xQA72DT",
-	"filament_id": "GFB99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"40"

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi.json

@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "dqHKVy4ahTjpQFOJ",
-	"filament_id": "GFG99",
+	"filament_id": "OFAnyzjN",
 	"instantiation": "true",
 	"filament_type": [
 		"PETG"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "GrYmKcX6ghgUO8z0",
-	"filament_id": "GFL99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "Fwd0BaBVmg2w9oBo",
-	"filament_id": "GFL99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "OjSAPfXD7c9LpDZI",
-	"filament_id": "GFL99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "tNk1yBoRzuKtWamt",
-	"filament_id": "GFB99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "oULA9qVGUD5izX9o",
-	"filament_id": "GFB99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "RK1LyCal04XMqidp",
-	"filament_id": "GFB99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "6ehhHeFIMe3KxHA1",
-	"filament_id": "GFB99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "i3bQYXjlGipOAop7",
-	"filament_id": "GFB99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "vknSksUeSeKFl8vB",
-	"filament_id": "GFB99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "I5NFFjIYcoo3SkmC",
-	"filament_id": "GFB99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "HATCHBOX PLA @Qidi",
 	"from": "system",
 	"setting_id": "gzDFMFaDnAVuDy3B",
-	"filament_id": "GFB99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi.json

@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "jWtANauqr4Azj7fo",
-	"filament_id": "GFL99",
+	"filament_id": "OFiJYDPC",
 	"instantiation": "true",
 	"filament_type": [
 		"PLA"

resources/profiles/Qidi/filament/Overture ABS @Qidi 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "PVJaNrzYRoafHb3k",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/Overture ABS @Qidi 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "6dP4f482dvR9Ihhu",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/Overture ABS @Qidi 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "ol1pj7wlmGJlZHbA",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "d9bOxYmwJJ928QUm",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "3vOLIQxScIoHCUDQ",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"0"

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "ninsIRmjQReutXjA",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "m4sql22MWPed4UK9",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "SbIhXnMLo7UWLdmF",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "Hh22vTpUyqF09bma",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "10PSPCpiTcS92auy",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture ABS @Qidi",
 	"from": "system",
 	"setting_id": "Xevn2nrx7W5VQX6z",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/Overture ABS @Qidi.json

@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "rRuO94f0PYlPR3yu",
-	"filament_id": "GFB99",
+	"filament_id": "OFuTFxVP",
 	"instantiation": "true",
 	"filament_type": [
 		"ABS"

resources/profiles/Qidi/filament/Overture PLA @Qidi 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "YnRI4rYCHDIi7Q0w",
-	"filament_id": "GFL99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"pressure_advance": [
 		"0.057"

resources/profiles/Qidi/filament/Overture PLA @Qidi 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "Jizherw9T9l0X76l",
-	"filament_id": "GFL99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/Overture PLA @Qidi 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "dHlHvcm2BjzlfUSk",
-	"filament_id": "GFL99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "3jqdiWNWro7yFptW",
-	"filament_id": "GFB99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "tARHr87BkRknTQJI",
-	"filament_id": "GFB99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "EEIdQ4XTkpQyRz3h",
-	"filament_id": "GFB99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "NBbNF6S5sQYIiS9T",
-	"filament_id": "GFB99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "gk2D7WKoLK1xPqLC",
-	"filament_id": "GFB99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "wtl6yNqJQUVhiBnB",
-	"filament_id": "GFB99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "1fl42MjkwXbpjJ3r",
-	"filament_id": "GFB99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "Overture PLA @Qidi",
 	"from": "system",
 	"setting_id": "vxGQSWw07PXnllwO",
-	"filament_id": "GFB99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"

resources/profiles/Qidi/filament/Overture PLA @Qidi.json

@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "XXJ4dSi48JuA54Iv",
-	"filament_id": "GFL99",
+	"filament_id": "OFC2FSsV",
 	"instantiation": "true",
 	"filament_type": [
 		"PLA"

resources/profiles/Qidi/filament/PolyLite ABS @Qidi 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "PolyLite ABS @Qidi",
 	"from": "system",
 	"setting_id": "5rbxArwT1VV5BOSq",
-	"filament_id": "GFB99",
+	"filament_id": "OFidJLn8",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/PolyLite ABS @Qidi 0.6 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "PolyLite ABS @Qidi",
 	"from": "system",
 	"setting_id": "EqpfLGTZXcdjm5BM",
-	"filament_id": "GFB99",
+	"filament_id": "OFidJLn8",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/PolyLite ABS @Qidi 0.8 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "PolyLite ABS @Qidi",
 	"from": "system",
 	"setting_id": "Ao01rvVFfkWlwpER",
-	"filament_id": "GFB99",
+	"filament_id": "OFidJLn8",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -4,7 +4,7 @@
 	"inherits": "PolyLite ABS @Qidi",
 	"from": "system",
 	"setting_id": "dfni3lzB8GJldfQD",
-	"filament_id": "GFB99",
+	"filament_id": "OFidJLn8",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"