mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 03:43:52 +00:00
[Profile] Add Qidi Q2 (#10539)
* New Machine This update introduces new consumables and a new model, Q2 * Delete HATCHBOX PLA @Qidi - 副本.json
This commit is contained in:
HYzd766
17
resources/profiles/Qidi/machine/Qidi Q2 0.2 nozzle.json
Normal file
17
resources/profiles/Qidi/machine/Qidi Q2 0.2 nozzle.json
Normal file
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM008",
|
||||
"name": "Qidi Q2 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Qidi Q2 0.4 nozzle",
|
||||
"printer_model": "Qidi Q2",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": ["QIDI PLA Rapido @Qidi Q2 0.2 nozzle"],
|
||||
"default_print_profile": "0.10mm Standard @Q2 0.2 nozzle",
|
||||
"max_layer_height": ["0.14"],
|
||||
"min_layer_height": ["0.04"],
|
||||
"nozzle_diameter": ["0.2"],
|
||||
"retraction_length": ["0.4"],
|
||||
"support_box_temp_control": "1"
|
||||
}
|
||||
42
resources/profiles/Qidi/machine/Qidi Q2 0.4 nozzle.json
Normal file
42
resources/profiles/Qidi/machine/Qidi Q2 0.4 nozzle.json
Normal file
@@ -0,0 +1,42 @@
|
||||
{
|
||||
"box_id" : "1",
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Qidi Q2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_q_common",
|
||||
"printer_model": "Qidi Q2",
|
||||
"gcode_flavor": "klipper",
|
||||
"default_print_profile": "0.20mm Standard @Qidi Q2",
|
||||
"printer_settings_id": "Qidi",
|
||||
"bed_exclude_area": ["0x0,11x0,11x16,0x16"],
|
||||
"change_filament_gcode": "G1 Z{max_layer_z + 3.0} F1200\nTOOL_CHANGE_START F=[current_extruder] T=[next_extruder]\nDISABLE_ALL_SENSOR\n{if long_retractions_when_cut[previous_extruder]}\nMOVE_TO_TRASH\nG1 E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM400\n{endif}\nCUT_FILAMENT T=[current_extruder]\nMOVE_TO_TRASH\nM106 S25\nM106 P2 S0\nUNLOAD_T[current_extruder]\n{if nozzle_temperature_range_high[current_extruder] >= nozzle_temperature_range_high[next_extruder]}\nM104 S{nozzle_temperature_range_high[current_extruder]}\n{else}\nM104 S{nozzle_temperature_range_high[next_extruder]}\n{endif}\nT[next_extruder]\n{if nozzle_temperature_range_high[current_extruder] >= nozzle_temperature_range_high[next_extruder]}\nSET_HEATER_TEMPERATURE HEATER=extruder TARGET={nozzle_temperature_range_high[current_extruder]} WAIT=1\n{else}\nSET_HEATER_TEMPERATURE HEATER=extruder TARGET={nozzle_temperature_range_high[next_extruder]} WAIT=1\n{endif}\n; FLUSH_START\nG1 E15 F900\nG1 E30 F300\n; FLUSH_END\n{if long_retractions_when_cut[previous_extruder]}\nG1 E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{endif}\n{if flush_length_1 > 1}\n; FLUSH_START\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\nG1 E-[old_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 E[old_retract_length_toolchange] F300\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_3 > 1}\nG1 X88 F9000\n; FLUSH_START\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\nM400\nM106 S255\nM104 S[new_filament_temp]\nG1 X89 F60\nG1 X85 F60\nG1 X89 F60\nM109 S[new_filament_temp]\nCLEAR_OOZE\nTOOL_CHANGE_END\nG1 Y270 F5000\nM106 S0\nENABLE_ALL_SENSOR",
|
||||
"default_filament_profile": ["QIDI PLA Rapido @Qidi Q2 0.4 nozzle"],
|
||||
"enable_long_retraction_when_cut": "2",
|
||||
"extruder_clearance_radius": "70",
|
||||
"extruder_clearance_height_to_rod": "40",
|
||||
"extruder_clearance_height_to_lid": "120",
|
||||
"is_support_3mf" : "1",
|
||||
"is_support_timelapse": "1",
|
||||
"is_support_multi_box": "1",
|
||||
"layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y235 F20000\nG1 X97 F20000\n{if layer_z <=25}\nG1 Z25\n{endif}\nG1 Y254 F2000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 E[retraction_length] F300\nG1 X85 F2000\nG1 X97 F2000\nG1 Y220 F2000\n{if layer_z <=25}\nG1 Z[layer_z]\n{endif}\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_end_gcode": "DISABLE_BOX_HEATER\nM141 S0\nM140 S0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y270 F12000\nG0 X90 Y270 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0",
|
||||
"machine_load_filament_time": "35",
|
||||
"machine_max_jerk_e": ["4"],
|
||||
"machine_max_jerk_x": ["9"],
|
||||
"machine_max_jerk_y": ["9"],
|
||||
"machine_max_jerk_z": ["4"],
|
||||
"machine_max_speed_z": ["20"],
|
||||
"machine_pause_gcode": "M0",
|
||||
"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG1 X108.000 Y1 F30000\nG0 Z[initial_layer_print_height] F600\n;G1 E3 F1800\nG90\nM83\nG0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 X108.000 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nM83\nG0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 Z1 F600",
|
||||
"machine_unload_filament_time": "35",
|
||||
"nozzle_diameter": ["0.4"],
|
||||
"nozzle_volume": ["125"],
|
||||
"printable_area": ["0x0","270x0","270x270","0x270"],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": ["259"],
|
||||
"support_box_temp_control": "1",
|
||||
"thumbnails_format": "PNG",
|
||||
"thumbnail_size": ["50x50"]
|
||||
}
|
||||
18
resources/profiles/Qidi/machine/Qidi Q2 0.6 nozzle.json
Normal file
18
resources/profiles/Qidi/machine/Qidi Q2 0.6 nozzle.json
Normal file
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM008",
|
||||
"name": "Qidi Q2 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Qidi Q2 0.4 nozzle",
|
||||
"default_filament_profile": ["QIDI PLA Rapido"],
|
||||
"default_print_profile": "0.30mm Standard @Q2 0.6 nozzle",
|
||||
"max_layer_height": ["0.42"],
|
||||
"min_layer_height": ["0.12"],
|
||||
"nozzle_diameter": ["0.6"],
|
||||
"printer_model": "Qidi Q2",
|
||||
"printer_variant": "0.6",
|
||||
"retraction_length": ["1.4"],
|
||||
"retraction_minimum_travel": ["3"],
|
||||
"support_box_temp_control": "1"
|
||||
}
|
||||
18
resources/profiles/Qidi/machine/Qidi Q2 0.8 nozzle.json
Normal file
18
resources/profiles/Qidi/machine/Qidi Q2 0.8 nozzle.json
Normal file
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM008",
|
||||
"name": "Qidi Q2 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Qidi Q2 0.4 nozzle",
|
||||
"default_filament_profile": ["QIDI PLA Rapido"],
|
||||
"default_print_profile": "0.40mm Standard @Q2 0.8 nozzle",
|
||||
"max_layer_height": ["0.56"],
|
||||
"min_layer_height": ["0.16"],
|
||||
"nozzle_diameter": ["0.8"],
|
||||
"printer_model": "Qidi Q2",
|
||||
"printer_variant": "0.8",
|
||||
"retract_length_toolchange": ["3"],
|
||||
"retraction_length": ["3"],
|
||||
"support_box_temp_control": "1"
|
||||
}
|
||||
12
resources/profiles/Qidi/machine/Qidi Q2.json
Normal file
12
resources/profiles/Qidi/machine/Qidi Q2.json
Normal file
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Qidi Q2",
|
||||
"model_id": "Qidi-Q2",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Qidi",
|
||||
"bed_model": "qidi_q2_buildplate_model.stl",
|
||||
"bed_texture": "qidi_q2_buildplate_texture.png",
|
||||
"hotend_model": "X-Series_gen3_hotend.stl",
|
||||
"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;QIDI PET-CF"
|
||||
}
|
||||
@@ -59,7 +59,7 @@
|
||||
"wipe_distance": [
|
||||
"2"],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"change_filament_gcode": "{if max_layer_z < 12}\nG1 Z15 F1200\n{else}\nG1 Z{max_layer_z + 3.0} F1200\n{endif}\nTOOL_CHANGE_START F=[current_extruder] T=[next_extruder]\nDISABLE_ALL_SENSOR\n{if long_retractions_when_cut[previous_extruder]}\nMOVE_TO_TRASH\nG1 E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM400\n{else}\nG1 E-5 F{old_filament_e_feedrate}\n{endif}\nCUT_FILAMENT T=[current_extruder]\nMOVE_TO_TRASH\nM400\n{if nozzle_temperature_range_high[current_extruder] >= nozzle_temperature_range_high[next_extruder]}\nM104 S{nozzle_temperature_range_high[current_extruder]}\n{else}\nM104 S{nozzle_temperature_range_high[next_extruder]}\n{endif}\nM106 S0\nM106 P2 S0\nUNLOAD_T[current_extruder]\nG92 E0\nM83\nG1 E2 F50\nT[next_extruder]\n{if nozzle_temperature_range_high[current_extruder] >= nozzle_temperature_range_high[next_extruder]}\nSET_HEATER_TEMPERATURE HEATER=extruder TARGET={nozzle_temperature_range_high[current_extruder]} WAIT=1\n{else}\nSET_HEATER_TEMPERATURE HEATER=extruder TARGET={nozzle_temperature_range_high[next_extruder]} WAIT=1\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nG1 E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{endif}\nM400\nM106 S60\n; FLUSH_START\nG1 E1 F50\nG1 E{65.5 * 0.58} F{old_filament_e_feedrate}\nG1 E{65.5 * 0.02} F50\nG1 E{65.5 * 0.18} F{old_filament_e_feedrate}\nG1 E{65.5 * 0.02} F50\nG1 E{65.5 * 0.18} F{old_filament_e_feedrate}\nG1 E{65.5 * 0.02} F50\nG1 E-[old_retract_length_toolchange] F1800\n; FLUSH_END\n{if flush_length_1 > 1}\nM400\nM106 S255\nG91\nG1 X-5 F60\nG1 X5 F60\nG90\nCLEAR_FLUSH\nM400\nM106 S60\n; FLUSH_START\nG1 E[old_retract_length_toolchange] F300\nG1 E{flush_length_1 * 0.58} F{new_filament_e_feedrate}\nG1 E{flush_length_1 * 0.02} F50\nG1 E{flush_length_1 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_1 * 0.02} F50\nG1 E{flush_length_1 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_1 * 0.02} F50\nG1 E-[old_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_2 > 1}\nM400\nM106 S255\nG91\nG1 X-5 F60\nG1 X5 F60\nG90\nCLEAR_FLUSH\nM400\nM106 S60\n; FLUSH_START\nG1 E[old_retract_length_toolchange] F300\nG1 E{flush_length_2 * 0.58} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_3 > 1}\nM400\nM106 S255\nG91\nG1 X-5 F60\nG1 X5 F60\nG90\nCLEAR_FLUSH\nM400\nM106 S60\n; FLUSH_START\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_3 * 0.58} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_4 > 1}\nM400\nM106 S255\nG91\nG1 X-5 F60\nG1 X5 F60\nG90\nCLEAR_FLUSH\nM400\nM106 S60\n; FLUSH_START\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_4 * 0.58} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\nM104 S[new_filament_temp]\nM400\nM106 S255\nG91\nG1 X-5 F60\nG1 X5 F60\nG90\nM109 S[new_filament_temp]\nG92 E0\nM400\nCLEAR_FLUSH\nCLEAR_OOZE\nM400\nM106 S0\nTOOL_CHANGE_END\nG1 Y305 F9000\nENABLE_ALL_SENSOR",
|
||||
"machine_pause_gcode": "M0",
|
||||
"thumbnails": [
|
||||
"272x272",
|
||||
@@ -87,10 +87,10 @@
|
||||
"extruder_clearance_radius": "72",
|
||||
"extruder_clearance_height_to_rod": "32",
|
||||
"extruder_clearance_height_to_lid": "135",
|
||||
"layer_change_gcode": "G92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
|
||||
"layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y304 F20000\nG1 X95 F20000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 Y324 F5000\nG1 E[retraction_length] F300\nG1 X65 F5000\nG1 Y290 F20000\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_end_gcode": "DISABLE_BOX_HEATER\nM141 S0\nM140 S0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y290 F12000\nG0 X90 Y290 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0",
|
||||
"time_lapse_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y304 F20000\nG1 X95 F20000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 Y324 F5000\nG1 E[retraction_length] F300\nG1 X65 F5000\nG1 Y290 F20000\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}",
|
||||
"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nG0 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0] - 12, first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\nSET_PRINT_STATS_INFO CURRENT_LAYER=1\n",
|
||||
"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG0 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0] - 12, first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\nSET_PRINT_STATS_INFO CURRENT_LAYER=1",
|
||||
"thumbnails_format": "PNG",
|
||||
"default_filament_profile": [
|
||||
"Qidi Generic PLA @Qidi X-Plus 4 0.4 nozzle"
|
||||
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "qidi_xplus4_buildplate_model.stl",
|
||||
"bed_texture": "qidi_xplus4_buildplate_texture.png",
|
||||
"hotend_model": "qidi_xseries_gen3_hotend.stl",
|
||||
"default_materials": "QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle;QIDI ABS Rapido @Qidi X-Plus 4 0.4 nozzle;QIDI ABS Rapido @Qidi X-Plus 4 0.2 nozzle;QIDI ABS Rapido @Qidi X-Plus 4 0.6 nozzle;QIDI ABS Rapido @Qidi X-Plus 4 0.8 nozzle;QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle;QIDI PETG Tough @Qidi X-Plus 4 0.2 nozzle;QIDI PETG Tough @Qidi X-Plus 4 0.6 nozzle;QIDI PETG Tough @Qidi X-Plus 4 0.8 nozzle;QIDI PLA Rapido Matte @Qidi X-Plus 4 0.4 nozzle;QIDI PLA Rapido Matte @Qidi X-Plus 4 0.2 nozzle;QIDI PLA Rapido Matte @Qidi X-Plus 4 0.6 nozzle;QIDI PLA Rapido Matte @Qidi X-Plus 4 0.8 nozzle;QIDI ASA @Qidi X-Plus 4 0.4 nozzle;QIDI ASA @Qidi X-Plus 4 0.2 nozzle;QIDI ASA @Qidi X-Plus 4 0.6 nozzle;QIDI ASA @Qidi X-Plus 4 0.8 nozzle;Qidi Generic PETG @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PETG @Qidi X-Plus 4 0.2 nozzle;Qidi Generic PETG @Qidi X-Plus 4 0.6 nozzle;Qidi Generic PETG @Qidi X-Plus 4 0.8 nozzle;Qidi Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PLA @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PLA @Qidi X-Plus 4 0.2 nozzle;Qidi Generic PLA @Qidi X-Plus 4 0.6 nozzle;Qidi Generic PLA @Qidi X-Plus 4 0.8 nozzle;Qidi Generic PLA High Speed @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PLA High Speed @Qidi X-Plus 4 0.2 nozzle;Qidi Generic PLA High Speed @Qidi X-Plus 4 0.6 nozzle;Qidi Generic PLA High Speed @Qidi X-Plus 4 0.8 nozzle"
|
||||
"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;Qidi Generic PETG"
|
||||
}
|
||||
|
||||
69
resources/profiles/Qidi/machine/fdm_q_common.json
Normal file
69
resources/profiles/Qidi/machine/fdm_q_common.json
Normal file
@@ -0,0 +1,69 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_q_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_qidi_x3_common",
|
||||
"printer_technology": "FFF",
|
||||
"auxiliary_fan": "1",
|
||||
"before_layer_change_gcode": "",
|
||||
"change_filament_gcode": "",
|
||||
"default_print_profile": "0.20mm Standard @Q1 Pro",
|
||||
"deretraction_speed": ["30"],
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": ["#FCE94F"],
|
||||
"extruder_offset": ["0x0"],
|
||||
"gcode_flavor": "klipper",
|
||||
"layer_change_gcode": "",
|
||||
"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": ["5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["5000", "5000"],
|
||||
"machine_max_acceleration_travel": ["9000", "9000"],
|
||||
"machine_max_acceleration_x": ["20000"],
|
||||
"machine_max_acceleration_y": ["20000"],
|
||||
"machine_max_acceleration_z": ["500"],
|
||||
"machine_max_jerk_e": ["2"],
|
||||
"machine_max_jerk_x": ["8"],
|
||||
"machine_max_jerk_y": ["8"],
|
||||
"machine_max_jerk_z": ["3"],
|
||||
"machine_max_speed_e": ["30"],
|
||||
"machine_max_speed_x": ["600"],
|
||||
"machine_max_speed_y": ["600"],
|
||||
"machine_max_speed_z": ["10"],
|
||||
"machine_min_extruding_rate": ["0", "0"],
|
||||
"machine_min_travel_rate": ["0", "0"],
|
||||
"machine_pause_gcode": "M0",
|
||||
"machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
|
||||
"machine_switch_extruder_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": ["0.28"],
|
||||
"min_layer_height": ["0.08"],
|
||||
"nozzle_diameter": ["0.4"],
|
||||
"nozzle_type": ["stainless_steel"],
|
||||
"printable_height": "250",
|
||||
"printer_settings_id": "",
|
||||
"printer_structure": "corexy",
|
||||
"printer_variant": "0.4",
|
||||
"retract_before_wipe": ["0%"],
|
||||
"retract_length_toolchange": ["2"],
|
||||
"retract_restart_extra_toolchange": ["0"],
|
||||
"retract_restart_extra": ["0"],
|
||||
"retract_when_changing_layer": ["1"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retraction_minimum_travel": ["1"],
|
||||
"retraction_speed": ["30"],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"support_air_filtration": ["1"],
|
||||
"support_box_temp_control": "0",
|
||||
"support_chamber_temp_control": "1",
|
||||
"thumbnail_size": ["380x380","210x210","110x110"],
|
||||
"wipe": ["1"],
|
||||
"z_hop_types": ["Auto Lift"],
|
||||
"z_hop": ["0.4"]
|
||||
}
|
||||
Reference in New Issue
Block a user