mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 10:32:20 +00:00
Fixed many profile issues and cleaned up some messes. (#10686)
This commit is contained in:
SoftFever
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_025",
|
||||
"name": "Geeetech A10 M 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A10 M",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A10 M 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_025",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A10 M",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"retraction_length": [
|
||||
@@ -34,19 +34,19 @@
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A10M：https://www.geeetech.com/wiki/index.php/Geeetech_A10M_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A10M：https://www.geeetech.com/wiki/index.php/Geeetech_A10M_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_021",
|
||||
"name": "Geeetech A10 Pro 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A10 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A10 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_021",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A10 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A10：https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A10：https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_022",
|
||||
"name": "Geeetech A10 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A10 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A10 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_022",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A10 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A10：https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A10：https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_023",
|
||||
"name": "Geeetech A10 Pro 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A10 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A10 Pro 0.6 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_023",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A10 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A10：https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A10：https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_024",
|
||||
"name": "Geeetech A10 Pro 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A10 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A10 Pro 0.8 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_024",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A10 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A10：https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A10：https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_026",
|
||||
"name": "Geeetech A10 T 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A10 T",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A10 T 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_026",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A10 T",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"retraction_length": [
|
||||
@@ -34,19 +34,19 @@
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_027",
|
||||
"name": "Geeetech A20 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A20",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A20 0.2 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_027",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A20",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A20：https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A20：https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_028",
|
||||
"name": "Geeetech A20 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A20",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A20 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_028",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A20",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A20：https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A20：https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_029",
|
||||
"name": "Geeetech A20 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A20",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A20 0.6 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_029",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A20",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A20：https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A20：https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_030",
|
||||
"name": "Geeetech A20 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A20",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A20 0.8 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_030",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A20",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A20：https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A20：https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_031",
|
||||
"name": "Geeetech A20 M 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A20 M",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A20 M 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_031",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A20 M",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"retraction_length": [
|
||||
@@ -34,19 +34,19 @@
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A20M：https://www.geeetech.com/wiki/index.php/Geeetech_A20M_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A20M：https://www.geeetech.com/wiki/index.php/Geeetech_A20M_3D_printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_032",
|
||||
"name": "Geeetech A20 T 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A20 T",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A20 T 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_032",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A20 T",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"retraction_length": [
|
||||
@@ -34,19 +34,19 @@
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_037",
|
||||
"name": "Geeetech A30 M 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A30 M",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A30 M 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_037",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A30 M",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"retraction_length": [
|
||||
@@ -35,18 +35,18 @@
|
||||
"deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below":[
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below": [
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_033",
|
||||
"name": "Geeetech A30 Pro 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A30 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A30 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_033",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A30 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below":[
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A30：https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below": [
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A30：https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_034",
|
||||
"name": "Geeetech A30 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A30 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A30 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_034",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A30 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below":[
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A30：https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below": [
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A30：https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_035",
|
||||
"name": "Geeetech A30 Pro 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A30 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A30 Pro 0.6 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_035",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A30 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below":[
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A30：https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below": [
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A30：https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_036",
|
||||
"name": "Geeetech A30 Pro 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A30 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A30 Pro 0.8 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_036",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A30 Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below":[
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A30：https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below": [
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for A30：https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_038",
|
||||
"name": "Geeetech A30 T 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech A30 T",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech A30 T 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_038",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech A30 T",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"retraction_length": [
|
||||
@@ -35,18 +35,18 @@
|
||||
"deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below":[
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "420",
|
||||
"retract_lift_below": [
|
||||
"419"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_039",
|
||||
"name": "Geeetech M1 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech M1",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech M1 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"type": "machine",
|
||||
"name": "Geeetech M1 0.2 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_039",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech M1",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech M1 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"3000",
|
||||
"3000"
|
||||
@@ -77,10 +77,10 @@
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
@@ -92,18 +92,18 @@
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"105x0",
|
||||
"105x105",
|
||||
"0x105"
|
||||
],
|
||||
"printable_height": "95",
|
||||
"retract_lift_below":[
|
||||
"95"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"105x0",
|
||||
"105x105",
|
||||
"0x105"
|
||||
],
|
||||
"printable_height": "95",
|
||||
"retract_lift_below": [
|
||||
"95"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_040",
|
||||
"name": "Geeetech M1 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech M1",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech M1",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"type": "machine",
|
||||
"name": "Geeetech M1 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_040",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech M1",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech M1",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"3000",
|
||||
"3000"
|
||||
@@ -77,11 +77,11 @@
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
@@ -92,24 +92,18 @@
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"105x0",
|
||||
"105x105",
|
||||
"0x105"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
"printable_height": "95",
|
||||
"retract_lift_below": [
|
||||
"95"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"105x0",
|
||||
"105x105",
|
||||
"0x105"
|
||||
],
|
||||
"printable_height": "95",
|
||||
"retract_lift_below":[
|
||||
"95"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_041",
|
||||
"name": "Geeetech M1 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech M1",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech M1 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"type": "machine",
|
||||
"name": "Geeetech M1 0.6 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_041",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech M1",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech M1 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"3000",
|
||||
"3000"
|
||||
@@ -77,11 +77,11 @@
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
@@ -92,24 +92,18 @@
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"105x0",
|
||||
"105x105",
|
||||
"0x105"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
"printable_height": "95",
|
||||
"retract_lift_below": [
|
||||
"95"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"105x0",
|
||||
"105x105",
|
||||
"0x105"
|
||||
],
|
||||
"printable_height": "95",
|
||||
"retract_lift_below":[
|
||||
"95"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_042",
|
||||
"name": "Geeetech M1 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech M1",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.44mm Draft @Geeetech M1 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"type": "machine",
|
||||
"name": "Geeetech M1 0.8 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_042",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech M1",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.44mm Draft @Geeetech M1 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"3000",
|
||||
"3000"
|
||||
@@ -77,11 +77,11 @@
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
@@ -92,24 +92,18 @@
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"105x0",
|
||||
"105x105",
|
||||
"0x105"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
"printable_height": "95",
|
||||
"retract_lift_below": [
|
||||
"95"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"105x0",
|
||||
"105x105",
|
||||
"0x105"
|
||||
],
|
||||
"printable_height": "95",
|
||||
"retract_lift_below":[
|
||||
"95"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_005",
|
||||
"name": "Geeetech Mizar 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar 0.2 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_005",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_006",
|
||||
"name": "Geeetech Mizar 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_006",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_007",
|
||||
"name": "Geeetech Mizar 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar 0.6 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_007",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_008",
|
||||
"name": "Geeetech Mizar 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar 0.8 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_008",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_021",
|
||||
"name": "Geeetech Mizar M 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar M",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar M 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_021",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar M",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarM：https://www.geeetech.com/wiki/index.php/Mizar_M \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarM：https://www.geeetech.com/wiki/index.php/Mizar_M \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_017",
|
||||
"name": "Geeetech Mizar Max 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar Max",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar Max 0.2 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_017",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar Max",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"retract_lift_below":[
|
||||
"399"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"retract_lift_below": [
|
||||
"399"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_018",
|
||||
"name": "Geeetech Mizar Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar Max",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar Max 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_018",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar Max",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"retract_lift_below":[
|
||||
"399"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"retract_lift_below": [
|
||||
"399"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_019",
|
||||
"name": "Geeetech Mizar Max 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar Max",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar Max 0.6 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_019",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar Max",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"retract_lift_below":[
|
||||
"399"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"retract_lift_below": [
|
||||
"399"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_020",
|
||||
"name": "Geeetech Mizar Max 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar Max",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar Max 0.8 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_020",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar Max",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"retract_lift_below":[
|
||||
"399"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"retract_lift_below": [
|
||||
"399"
|
||||
],
|
||||
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_013",
|
||||
"name": "Geeetech Mizar Pro 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar Pro 0.2 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_013",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro：https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro：https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_014",
|
||||
"name": "Geeetech Mizar Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar Pro 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_014",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro：https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro：https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_015",
|
||||
"name": "Geeetech Mizar Pro 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar Pro 0.6 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_015",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro：https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro：https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_016",
|
||||
"name": "Geeetech Mizar Pro 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar Pro 0.8 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_016",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar Pro",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro：https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro：https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_009",
|
||||
"name": "Geeetech Mizar S 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar S",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar S 0.2 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_009",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar S",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_010",
|
||||
"name": "Geeetech Mizar S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar S",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar S 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_010",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar S",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech common",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_011",
|
||||
"name": "Geeetech Mizar S 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar S",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar S 0.6 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_011",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar S",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_012",
|
||||
"name": "Geeetech Mizar S 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Mizar S",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"type": "machine",
|
||||
"name": "Geeetech Mizar S 0.8 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_012",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Mizar S",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":[
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,82 +1,94 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_002",
|
||||
"name": "Geeetech Thunder 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Thunder",
|
||||
"default_filament_profile": ["Generic PLA @System"],
|
||||
"extruder_type": ["Bowden"],
|
||||
"nozzle_diameter": ["0.2"],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Fine @Geeetech Thunder",
|
||||
"max_layer_height": ["0.14"],
|
||||
"min_layer_height": ["0.04"],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":["259"],
|
||||
"type": "machine",
|
||||
"name": "Geeetech Thunder 0.2 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_002",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Thunder",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Fine @Geeetech Thunder",
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
|
||||
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
|
||||
"nozzle_type": "brass",
|
||||
|
||||
@@ -1,82 +1,94 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_001",
|
||||
"name": "Geeetech Thunder 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Thunder",
|
||||
"default_filament_profile": ["Generic PLA @System"],
|
||||
"extruder_type": ["Bowden"],
|
||||
"nozzle_diameter": ["0.4"],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech Thunder",
|
||||
"max_layer_height": ["0.3"],
|
||||
"min_layer_height": ["0.07"],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":["259"],
|
||||
"type": "machine",
|
||||
"name": "Geeetech Thunder 0.4 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Thunder",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.20mm Standard @Geeetech Thunder",
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
|
||||
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
|
||||
"nozzle_type": "brass",
|
||||
|
||||
@@ -1,82 +1,94 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_003",
|
||||
"name": "Geeetech Thunder 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Thunder",
|
||||
"default_filament_profile": ["Generic PLA @System"],
|
||||
"extruder_type": ["Bowden"],
|
||||
"nozzle_diameter": ["0.6"],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech Thunder 0.6 nozzle",
|
||||
"max_layer_height": ["0.42"],
|
||||
"min_layer_height": ["0.12"],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":["259"],
|
||||
"type": "machine",
|
||||
"name": "Geeetech Thunder 0.6 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_003",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Thunder",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @Geeetech Thunder 0.6 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
|
||||
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
|
||||
"nozzle_type": "brass",
|
||||
|
||||
@@ -1,82 +1,94 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM_GEEETECH_004",
|
||||
"name": "Geeetech Thunder 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"printer_model": "Geeetech Thunder",
|
||||
"default_filament_profile": ["Generic PLA @System"],
|
||||
"extruder_type": ["Bowden"],
|
||||
"nozzle_diameter": ["0.8"],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.44mm Draft @Geeetech Thunder 0.8 nozzle",
|
||||
"max_layer_height": ["0.56"],
|
||||
"min_layer_height": ["0.16"],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below":["259"],
|
||||
"type": "machine",
|
||||
"name": "Geeetech Thunder 0.8 nozzle",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM_GEEETECH_004",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Geeetech Thunder",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Bowden"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.44mm Draft @Geeetech Thunder 0.8 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3500",
|
||||
"3500"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
|
||||
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
|
||||
"nozzle_type": "brass",
|
||||
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "Geeetech_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
|
||||
}
|
||||
}
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_Geeetech_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "1",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"type": "machine",
|
||||
"name": "fdm_Geeetech_HS_common",
|
||||
"inherits": "fdm_geeetech_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "1",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
@@ -68,10 +68,10 @@
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
],
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"machine_start_gcode": "G28\nM141 S0\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600",
|
||||
"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\nG0 Z{min(max_print_height,max_layer_z+10)} F600\nG0 X0 Y{print_bed_max[1]} F12000",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
}
|
||||
@@ -1,9 +1,9 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_geeetech_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_machine_common",
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
@@ -138,4 +138,4 @@
|
||||
"support_multi_bed_types": "1",
|
||||
"auxiliary_fan": "0",
|
||||
"z_hop_types": "Normal Lift"
|
||||
}
|
||||
}
|
||||
@@ -114,7 +114,7 @@
|
||||
"z_lift_type": "NormalLift",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"before_layer_change_gcode": "G92 E0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_pause_gcode": "M601",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user