mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 19:33:47 +00:00
Fixed many profile issues and cleaned up some messes. (#10686)
This commit is contained in:
SoftFever
@@ -19,5 +19,4 @@
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
}
|
||||
@@ -13,4 +13,4 @@
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "EPLAEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
"21"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
@@ -21,11 +21,11 @@
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -36,7 +36,7 @@
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "EPLAPROEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
@@ -15,11 +15,11 @@
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -33,7 +33,7 @@
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "EPLAPLUSEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
@@ -15,11 +15,11 @@
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -13,4 +13,4 @@
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -36,7 +36,7 @@
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
|
||||
@@ -16,4 +16,4 @@
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -19,5 +19,4 @@
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
}
|
||||
@@ -13,4 +13,4 @@
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "EPLAECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
"21"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
@@ -21,11 +21,11 @@
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -36,7 +36,7 @@
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "EPLAPROECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
@@ -15,11 +15,11 @@
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -33,7 +33,7 @@
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
"setting_id": "EPLAPLUSECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
@@ -15,11 +15,11 @@
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -36,7 +36,7 @@
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
|
||||
@@ -13,4 +13,4 @@
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -36,7 +36,7 @@
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
|
||||
@@ -16,4 +16,4 @@
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -9,15 +9,14 @@
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
}
|
||||
@@ -1,17 +1,17 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @base",
|
||||
"inherits": "fdm_elegoo_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "EASAB00",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @base",
|
||||
"inherits": "fdm_elegoo_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "EASAB00",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
]
|
||||
}
|
||||
@@ -5,32 +5,31 @@
|
||||
"from": "system",
|
||||
"setting_id": "EASA00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -9,14 +9,14 @@
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -1,83 +1,83 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @base",
|
||||
"inherits": "fdm_elegoo_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "EPETGPROB00",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @base",
|
||||
"inherits": "fdm_elegoo_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "EPETGPROB00",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
]
|
||||
}
|
||||
@@ -5,31 +5,31 @@
|
||||
"from": "system",
|
||||
"setting_id": "EPETGPRO00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLA00020",
|
||||
"instantiation": "true",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -33,14 +33,14 @@
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -33,30 +33,30 @@
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -9,14 +9,14 @@
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -9,30 +9,30 @@
|
||||
"16"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -33,14 +33,14 @@
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -15,7 +15,7 @@
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
|
||||
@@ -30,30 +30,30 @@
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -9,14 +9,14 @@
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -9,30 +9,30 @@
|
||||
"16"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF @base",
|
||||
"inherits": "fdm_elegoo_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "EPLACFB00",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF @base",
|
||||
"inherits": "fdm_elegoo_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "EPLACFB00",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
@@ -33,30 +33,30 @@
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -9,30 +9,30 @@
|
||||
"15"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -9,14 +9,14 @@
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -1,83 +1,83 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PETG @base",
|
||||
"inherits": "fdm_elegoo_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "ERPETGB00",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PETG @base",
|
||||
"inherits": "fdm_elegoo_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "ERPETGB00",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
@@ -6,30 +6,30 @@
|
||||
"setting_id": "ERPETGPLUS00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -6,30 +6,30 @@
|
||||
"setting_id": "ERPETG00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -9,14 +9,14 @@
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -1,20 +1,20 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PLA+ @base",
|
||||
"inherits": "fdm_elegoo_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "ERPLAPLUSB00",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PLA+ @base",
|
||||
"inherits": "fdm_elegoo_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "ERPLAPLUSB00",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -33,30 +33,30 @@
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @base",
|
||||
"inherits": "fdm_elegoo_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "ETPU95AB00",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @base",
|
||||
"inherits": "fdm_elegoo_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "ETPU95AB00",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -65,19 +65,19 @@
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
|
||||
@@ -1,25 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB98",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Elegoo ASA @Elegoo Giga",
|
||||
"inherits": "Generic ASA @Elegoo",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @Elegoo Giga",
|
||||
"inherits": "Generic ASA @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,18 +1,18 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFG99",
|
||||
"setting_id": "GFSG99",
|
||||
"name": "Elegoo PETG PRO @Elegoo Giga",
|
||||
"inherits": "Generic PETG PRO @Elegoo",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @Elegoo Giga",
|
||||
"inherits": "Generic PETG PRO @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,18 +1,18 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFL99",
|
||||
"setting_id": "GFSL99",
|
||||
"name": "Elegoo PLA @Elegoo Giga",
|
||||
"inherits": "Generic PLA @Elegoo",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @Elegoo Giga",
|
||||
"inherits": "Generic PLA @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,42 +1,42 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFL99",
|
||||
"setting_id": "GFSL99",
|
||||
"name": "Elegoo PLA Matte @Elegoo Giga",
|
||||
"inherits": "Generic PLA Matte @Elegoo",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @Elegoo Giga",
|
||||
"inherits": "Generic PLA Matte @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,39 +1,45 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB99",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ABS @Elegoo",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": ["0.926"],
|
||||
"filament_max_volumetric_speed": ["12"],
|
||||
"nozzle_temperature_initial_layer": ["245"],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Elegoo",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,45 +1,45 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB98",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ASA @Elegoo",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ASA @Elegoo",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,49 +1,75 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFG99",
|
||||
"setting_id": "GFSG99",
|
||||
"name": "Generic PETG @Elegoo",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"reduce_fan_stop_start_freq": ["1"],
|
||||
"slow_down_for_layer_cooling": ["1"],
|
||||
"fan_cooling_layer_time": ["30"],
|
||||
"overhang_fan_speed": ["90"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"nozzle_temperature_initial_layer": ["240"],
|
||||
"fan_max_speed": ["50"],
|
||||
"fan_min_speed": ["20"],
|
||||
"slow_down_min_speed": ["10"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_max_volumetric_speed": ["10"],
|
||||
"filament_start_gcode": ["; filament start gcode\n"],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @Elegoo",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,108 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFG99",
|
||||
"setting_id": "GFSG99",
|
||||
"name": "Generic PETG PRO @Elegoo",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG PRO @Elegoo",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,40 +1,48 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFL99",
|
||||
"setting_id": "GFSL99",
|
||||
"name": "Generic PLA @Elegoo",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_max_volumetric_speed": ["15"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @Elegoo",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,48 +1,48 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFL99",
|
||||
"setting_id": "GFSL99",
|
||||
"name": "Generic PLA Matte @Elegoo",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA Matte @Elegoo",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,34 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_filament_common",
|
||||
"cool_plate_temp": ["100"],
|
||||
"eng_plate_temp": ["100"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"textured_plate_temp": ["100"],
|
||||
"cool_plate_temp_initial_layer": ["100"],
|
||||
"eng_plate_temp_initial_layer": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"textured_plate_temp_initial_layer": ["100"],
|
||||
"slow_down_for_layer_cooling": ["1"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"fan_cooling_layer_time": ["30"],
|
||||
"filament_max_volumetric_speed": ["11"],
|
||||
"filament_type": ["ABS"],
|
||||
"filament_density": ["1.04"],
|
||||
"filament_cost": ["20"],
|
||||
"nozzle_temperature_initial_layer": ["180"],
|
||||
"reduce_fan_stop_start_freq": ["1"],
|
||||
"fan_max_speed": ["0"],
|
||||
"fan_min_speed": ["0"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"overhang_fan_speed": ["30"],
|
||||
"nozzle_temperature": ["245"],
|
||||
"temperature_vitrification": ["110"],
|
||||
"nozzle_temperature_range_low": ["240"],
|
||||
"nozzle_temperature_range_high": ["245"],
|
||||
"slow_down_min_speed": ["10"],
|
||||
"slow_down_layer_time": ["3"]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"180"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
@@ -1,52 +1,144 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": ["60"],
|
||||
"eng_plate_temp": ["60"],
|
||||
"hot_plate_temp": ["60"],
|
||||
"textured_plate_temp": ["60"],
|
||||
"cool_plate_temp_initial_layer": ["60"],
|
||||
"eng_plate_temp_initial_layer": ["60"],
|
||||
"hot_plate_temp_initial_layer": ["60"],
|
||||
"textured_plate_temp_initial_layer": ["60"],
|
||||
"overhang_fan_threshold": ["95%"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"slow_down_for_layer_cooling": ["1"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"filament_end_gcode": ["; filament end gcode \n"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"reduce_fan_stop_start_freq": ["0"],
|
||||
"fan_cooling_layer_time": ["60"],
|
||||
"filament_cost": ["0"],
|
||||
"filament_density": ["0"],
|
||||
"filament_deretraction_speed": ["nil"],
|
||||
"filament_diameter": ["1.75"],
|
||||
"filament_max_volumetric_speed": ["0"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_retraction_minimum_travel": ["nil"],
|
||||
"filament_retract_before_wipe": ["nil"],
|
||||
"filament_retract_when_changing_layer": ["nil"],
|
||||
"filament_retraction_length": ["nil"],
|
||||
"filament_z_hop": ["nil"],
|
||||
"filament_z_hop_types": ["nil"],
|
||||
"filament_retract_restart_extra": ["nil"],
|
||||
"filament_retraction_speed": ["nil"],
|
||||
"filament_settings_id": [""],
|
||||
"filament_soluble": ["0"],
|
||||
"filament_type": ["PLA"],
|
||||
"filament_vendor": ["Generic"],
|
||||
"filament_wipe": ["nil"],
|
||||
"filament_wipe_distance": ["nil"],
|
||||
"bed_type": ["Cool Plate"],
|
||||
"nozzle_temperature_initial_layer": ["200"],
|
||||
"full_fan_speed_layer": ["0"],
|
||||
"fan_max_speed": ["100"],
|
||||
"fan_min_speed": ["35"],
|
||||
"slow_down_min_speed": ["10"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"filament_start_gcode": ["; Filament gcode\n"],
|
||||
"nozzle_temperature": ["200"],
|
||||
"temperature_vitrification": ["100"]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
@@ -1,67 +1,67 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
@@ -1,36 +1,94 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_filament_common",
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"filament_max_volumetric_speed": ["15"],
|
||||
"filament_type": ["PLA"],
|
||||
"filament_density": ["1.24"],
|
||||
"filament_cost": ["20"],
|
||||
"cool_plate_temp": ["60"],
|
||||
"eng_plate_temp": ["60"],
|
||||
"hot_plate_temp": ["60"],
|
||||
"textured_plate_temp": ["60"],
|
||||
"cool_plate_temp_initial_layer": ["60"],
|
||||
"eng_plate_temp_initial_layer": ["60"],
|
||||
"hot_plate_temp_initial_layer": ["60"],
|
||||
"textured_plate_temp_initial_layer": ["60"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"reduce_fan_stop_start_freq": ["1"],
|
||||
"slow_down_for_layer_cooling": ["1"],
|
||||
"fan_max_speed": ["100"],
|
||||
"fan_min_speed": ["100"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"overhang_fan_threshold": ["50%"],
|
||||
"close_fan_the_first_x_layers": ["1"],
|
||||
"nozzle_temperature": ["205"],
|
||||
"temperature_vitrification": ["60"],
|
||||
"nozzle_temperature_range_low": ["205"],
|
||||
"nozzle_temperature_range_high": ["210"],
|
||||
"slow_down_min_speed": ["10"],
|
||||
"slow_down_layer_time": ["4"],
|
||||
"additional_cooling_fan_speed": ["70"],
|
||||
"filament_start_gcode": ["; filament start gcode\n"]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"205"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"210"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.2 nozzle",
|
||||
"inherits": "Elegoo Centauri 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EC02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo C 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.2 nozzle",
|
||||
"inherits": "Elegoo Centauri 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EC02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo C 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
@@ -1,58 +1,57 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.4 nozzle",
|
||||
"inherits": "fdm_machine_ecc",
|
||||
"from": "system",
|
||||
"setting_id": "EC04",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"257x0",
|
||||
"257x257",
|
||||
"0x257"
|
||||
],
|
||||
"printable_height": "257",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"246x0",
|
||||
"256x0",
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EC"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo C 0.4 nozzle",
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"scan_first_layer": "1",
|
||||
"default_bed_type": "4",
|
||||
"upward_compatible_machine": [
|
||||
],
|
||||
"gcode_flavor": "klipper",
|
||||
"change_filament_gcode": "M600",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.4 nozzle",
|
||||
"inherits": "fdm_machine_ecc",
|
||||
"from": "system",
|
||||
"setting_id": "EC04",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"257x0",
|
||||
"257x257",
|
||||
"0x257"
|
||||
],
|
||||
"printable_height": "257",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"246x0",
|
||||
"256x0",
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EC"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo C 0.4 nozzle",
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"scan_first_layer": "1",
|
||||
"default_bed_type": "4",
|
||||
"upward_compatible_machine": [],
|
||||
"gcode_flavor": "klipper",
|
||||
"change_filament_gcode": "M600",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
}
|
||||
@@ -11,17 +11,17 @@
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EC"
|
||||
"Elegoo PLA @EC"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo C 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
|
||||
@@ -11,17 +11,17 @@
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EC"
|
||||
"Elegoo PLA @EC"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo C 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
"1.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Centauri",
|
||||
"model_id": "Elegoo-C",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_centuri_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @EC;Elegoo RAPID PETG+;;Elegoo RAPID PLA+ @EC;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @EC;Elegoo TPU 95A @EC"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Centauri",
|
||||
"model_id": "Elegoo-C",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_centuri_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @EC;Elegoo RAPID PETG+;;Elegoo RAPID PLA+ @EC;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @EC;Elegoo TPU 95A @EC"
|
||||
}
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"inherits": "Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ECC02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo CC 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"inherits": "Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ECC02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo CC 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
@@ -1,58 +1,57 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"inherits": "fdm_machine_ecc",
|
||||
"from": "system",
|
||||
"setting_id": "ECC04",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"257x0",
|
||||
"257x257",
|
||||
"0x257"
|
||||
],
|
||||
"printable_height": "257",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"246x0",
|
||||
"256x0",
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"default_bed_type": "4",
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"scan_first_layer": "1",
|
||||
"upward_compatible_machine": [
|
||||
],
|
||||
"gcode_flavor": "klipper",
|
||||
"change_filament_gcode": "M600",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"inherits": "fdm_machine_ecc",
|
||||
"from": "system",
|
||||
"setting_id": "ECC04",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"257x0",
|
||||
"257x257",
|
||||
"0x257"
|
||||
],
|
||||
"printable_height": "257",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"246x0",
|
||||
"256x0",
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"default_bed_type": "4",
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"scan_first_layer": "1",
|
||||
"upward_compatible_machine": [],
|
||||
"gcode_flavor": "klipper",
|
||||
"change_filament_gcode": "M600",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
}
|
||||
@@ -11,17 +11,17 @@
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC"
|
||||
"Elegoo PLA @ECC"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo CC 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
|
||||
@@ -11,17 +11,17 @@
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC"
|
||||
"Elegoo PLA @ECC"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo CC 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
"1.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Centauri Carbon",
|
||||
"model_id": "Elegoo-CC",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC;Elegoo PLA-CF @ECC;Elegoo PLA @ECC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @ECC;Elegoo RAPID PETG+;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @ECC;Elegoo TPU 95A @ECC"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Centauri Carbon",
|
||||
"model_id": "Elegoo-CC",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC;Elegoo PLA-CF @ECC;Elegoo PLA @ECC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @ECC;Elegoo RAPID PETG+;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @ECC;Elegoo TPU 95A @ECC"
|
||||
}
|
||||
@@ -1,143 +1,143 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_ecc",
|
||||
"inherits": "fdm_machine_ecc_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"256x0",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below":[
|
||||
"249"
|
||||
],
|
||||
"extruder_clearance_radius": "57",
|
||||
"extruder_clearance_max_radius": "68",
|
||||
"extruder_clearance_height_to_lid": "90",
|
||||
"nozzle_volume": "107",
|
||||
"printer_structure": "corexy",
|
||||
"best_object_pos":"0.5x0.5",
|
||||
"retraction_minimum_travel": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.2"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"thumbnails": [
|
||||
"320x320",
|
||||
"160x160"
|
||||
],
|
||||
"thumbnails_format": "PNG",
|
||||
"nozzle_type": "brass",
|
||||
"single_extruder_multi_material": "1",
|
||||
"machine_end_gcode": ";===== date: 20240510 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y245 F3000\n\nG1 X65 Y245 F12000\nG1 Y245 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n",
|
||||
"layer_change_gcode": ";LAYER:{layer_num+1}\n",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M600"
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_ecc",
|
||||
"inherits": "fdm_machine_ecc_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"256x0",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"extruder_clearance_radius": "57",
|
||||
"extruder_clearance_max_radius": "68",
|
||||
"extruder_clearance_height_to_lid": "90",
|
||||
"nozzle_volume": "107",
|
||||
"printer_structure": "corexy",
|
||||
"best_object_pos": "0.5x0.5",
|
||||
"retraction_minimum_travel": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.2"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"thumbnails": [
|
||||
"320x320",
|
||||
"160x160"
|
||||
],
|
||||
"thumbnails_format": "PNG",
|
||||
"nozzle_type": "brass",
|
||||
"single_extruder_multi_material": "1",
|
||||
"machine_end_gcode": ";===== date: 20240510 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y245 F3000\n\nG1 X65 Y245 F12000\nG1 Y245 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n",
|
||||
"layer_change_gcode": ";LAYER:{layer_num+1}\n",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M600"
|
||||
}
|
||||
@@ -116,7 +116,7 @@
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
"Auto Lift"
|
||||
],
|
||||
"default_filament_profile": [],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
@@ -127,4 +127,4 @@
|
||||
"purge_in_prime_tower": "0",
|
||||
"manual_filament_change": "1",
|
||||
"enable_filament_ramming": "0"
|
||||
}
|
||||
}
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"printer_model": "Elegoo Neptune",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"210x0",
|
||||
"210x210",
|
||||
"0x210"
|
||||
],
|
||||
"printable_height": "200",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"210x0",
|
||||
"210x210",
|
||||
"0x210"
|
||||
],
|
||||
"printable_height": "200",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"printer_model": "Elegoo Neptune 2",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune2",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 2 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 2",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune2",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_neptune2_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune2_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
@@ -1,131 +1,131 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 2D 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"printer_model": "Elegoo Neptune 2D",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune2D",
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 2D 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 2D",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune2D",
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0"
|
||||
"0x0"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32",
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08",
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "T[initial_tool] ; set active extruder\nM413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32",
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08",
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "T[initial_tool] ; set active extruder\nM413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_neptune2d_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune2d_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 2S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"printer_model": "Elegoo Neptune 2S",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune2S",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 2S 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 2S",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune2S",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_neptune2s_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune2s_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
@@ -1,111 +1,111 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 3 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"printer_model": "Elegoo Neptune 3",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "280",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 3",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "280",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"printer_model": "Elegoo Neptune 3 Max",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Max",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "500",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 3 Max",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Max",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "500",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_neptune3max_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune_max_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"printer_model": "Elegoo Neptune 3 Plus",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Plus",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 3 Plus",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Plus",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_neptune3plus_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune3plus_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"printer_model": "Elegoo Neptune 3 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Pro",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "280",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 3 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Pro",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "280",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_neptune3pro_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune3pro_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_neptune3_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune3_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
|
||||
}
|
||||
@@ -1,61 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,61 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,61 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,61 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
|
||||
"max_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,88 +1,124 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": ["#FCE94F"],
|
||||
"extruder_offset": ["0x0"],
|
||||
"fan_kickstart": "0",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": ["85%"],
|
||||
"retract_length_toolchange": ["2"],
|
||||
"deretraction_speed": ["45"],
|
||||
"retract_lift_above": ["0"],
|
||||
"retract_lift_below": ["0"],
|
||||
"retract_lift_enforce": ["All Surfaces"],
|
||||
"retract_restart_extra": ["0"],
|
||||
"retract_restart_extra_toolchange": ["0"],
|
||||
"retract_when_changing_layer": ["1"],
|
||||
"retraction_length": ["0.7"],
|
||||
"retraction_minimum_travel": ["1"],
|
||||
"retraction_speed": ["60"],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": ["1"],
|
||||
"wipe_distance": ["1"],
|
||||
"z_hop": ["0.4"],
|
||||
"z_hop_types": ["Normal Lift"],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,88 +1,124 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": ["#FCE94F"],
|
||||
"extruder_offset": ["0x0"],
|
||||
"fan_kickstart": "0",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": ["85%"],
|
||||
"retract_length_toolchange": ["2"],
|
||||
"deretraction_speed": ["45"],
|
||||
"retract_lift_above": ["0"],
|
||||
"retract_lift_below": ["0"],
|
||||
"retract_lift_enforce": ["All Surfaces"],
|
||||
"retract_restart_extra": ["0"],
|
||||
"retract_restart_extra_toolchange": ["0"],
|
||||
"retract_when_changing_layer": ["1"],
|
||||
"retraction_length": ["0.7"],
|
||||
"retraction_minimum_travel": ["1"],
|
||||
"retraction_speed": ["60"],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": ["1"],
|
||||
"wipe_distance": ["1"],
|
||||
"z_hop": ["0.4"],
|
||||
"z_hop_types": ["Normal Lift"],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,88 +1,124 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": ["#FCE94F"],
|
||||
"extruder_offset": ["0x0"],
|
||||
"fan_kickstart": "0",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": ["85%"],
|
||||
"retract_length_toolchange": ["2"],
|
||||
"deretraction_speed": ["45"],
|
||||
"retract_lift_above": ["0"],
|
||||
"retract_lift_below": ["0"],
|
||||
"retract_lift_enforce": ["All Surfaces"],
|
||||
"retract_restart_extra": ["0"],
|
||||
"retract_restart_extra_toolchange": ["0"],
|
||||
"retract_when_changing_layer": ["1"],
|
||||
"retraction_length": ["0.7"],
|
||||
"retraction_minimum_travel": ["1"],
|
||||
"retraction_speed": ["60"],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": ["1"],
|
||||
"wipe_distance": ["1"],
|
||||
"z_hop": ["0.4"],
|
||||
"z_hop_types": ["Normal Lift"],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -1,88 +1,124 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": ["#FCE94F"],
|
||||
"extruder_offset": ["0x0"],
|
||||
"fan_kickstart": "0",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.20"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": ["85%"],
|
||||
"retract_length_toolchange": ["2"],
|
||||
"deretraction_speed": ["45"],
|
||||
"retract_lift_above": ["0"],
|
||||
"retract_lift_below": ["0"],
|
||||
"retract_lift_enforce": ["All Surfaces"],
|
||||
"retract_restart_extra": ["0"],
|
||||
"retract_restart_extra_toolchange": ["0"],
|
||||
"retract_when_changing_layer": ["1"],
|
||||
"retraction_length": ["0.7"],
|
||||
"retraction_minimum_travel": ["1"],
|
||||
"retraction_speed": ["60"],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": ["1"],
|
||||
"wipe_distance": ["1"],
|
||||
"z_hop": ["0.4"],
|
||||
"z_hop_types": ["Normal Lift"],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.20"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
@@ -7,7 +7,9 @@
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4max_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune_max_buildplate_texture.png",
|
||||
"bed_exclude_area": ["0x0"],
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
}
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user