Fixed many profile issues and cleaned up some messes. (#10686)

resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json

@@ -1,5 +1,9 @@
 {
-	"instantiation": "true",
+    "type": "machine",
+    "name": "Cubicon xCeler-I 0.4 nozzle",
+    "inherits": "fdm_machine_common",
+    "from": "User",
+    "instantiation": "true",
     "adaptive_bed_mesh_margin": "0",
     "auxiliary_fan": "1",
     "bbl_use_printhost": "0",
@@ -41,13 +45,10 @@
     "fan_kickstart": "0",
     "fan_speedup_overhangs": "1",
     "fan_speedup_time": "0",
-    "from": "User",
     "gcode_flavor": "klipper",
     "head_wrap_detect_zone": [],
     "high_current_on_filament_swap": "0",
     "host_type": "octoprint",
-    "inherits": "fdm_machine_common",
-    "is_custom_defined": "0",
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "long_retractions_when_cut": [
         "0"
@@ -78,7 +79,6 @@
         "25",
         "12"
     ],
-
     "machine_max_acceleration_retracting": [
         "5000",
         "5000"
@@ -87,7 +87,6 @@
         "13000",
         "13000"
     ],
-
     "machine_max_jerk_e": [
         "20",
         "20"
@@ -139,7 +138,6 @@
     "min_layer_height": [
         "0.1"
     ],
-    "name": "Cubicon xCeler-I 0.4 nozzle",
     "nozzle_diameter": [
         "0.4"
     ],
@@ -230,7 +228,6 @@
     "upward_compatible_machine": [],
     "use_firmware_retraction": "0",
     "use_relative_e_distances": "1",
-    "version": "2.1.1.0",
     "wipe": [
         "0"
     ],
@@ -244,4 +241,4 @@
         "Normal Lift"
     ],
     "z_offset": "0"
-}
+}

resources/profiles/Cubicon/machine/Cubicon xCeler-I.json

@@ -7,4 +7,4 @@
     "family": "Cuibicon",
     "machine_tech": "FFF",
     "default_materials": "Cubicon PLA @Cubicon xCeler-I 0.4 nozzle"
-}
+}

resources/profiles/Cubicon/machine/fdm_machine_common.json

@@ -15,8 +15,8 @@
     ],
     "gcode_flavor": "marlin",
     "silent_mode": "0",
-	"support_chamber_temp_control": "0",
-	"support_air_filtration": "0",
+    "support_chamber_temp_control": "0",
+    "support_air_filtration": "0",
     "machine_max_acceleration_e": [
         "5000"
     ],
@@ -117,4 +117,4 @@
     "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
     "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
     "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
-}
+}