Wiki Update part 5 (#9873)

* BASE

* precise wall and z moved

* PolyHoles

* Arc-fitting

* X-Y Compensation

* Elephant foot + moved images

* Update quality_settings_precision.md

* Wall generator and more

* Full Reorder

* TPMS-D bases

* Update strength_settings_infill.md

* Image Fix + Infill desc calculator

* Descriptions + image fix

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Update cornering-calib.md

* minor fixes

* Wip updated

* Missing fills

* Update infill_desc_calculator.xlsx

* Update infill_desc_calculator.xlsx

* Update infill documentation and images

Removed outdated 'iso' infill images and updated 'top' infill images with new versions. Added new images for adaptive cubic and 2D honeycomb infill patterns. Updated strength_settings_infill.md to revise infill strength values, descriptions, and remove references to deleted images. Introduced documentation for 2D honeycomb infill and made minor corrections and clarifications throughout.

* Revise infill pattern documentation and add comparison table

Updated strength_settings_infill.md to clarify infill density calculation, add a comprehensive comparison table of infill patterns, and standardize terminology for strength and print time. Expanded pattern descriptions to use qualitative strength ratings instead of numeric values. Updated infill_desc_calculator.xlsx to reflect these changes.

* Indentation in  code examples

Adjusted the indentation of code blocks in the cornering calibration documentation for clarity and consistency with the rest of the document.

* Update 3D Honeycomb infill strength ratings

Adjusted the horizontal strength rating for 3D Honeycomb infill from 'Normal' to 'Normal-High' in the strength settings documentation and table. Updated the infill_desc_calculator.xlsx file to reflect these changes.

* Formatting and fix in ERS documentation

Updated headings to use consistent Markdown syntax, improved clarity in explanations, and reworded references for better readability.

* Fix wall generator doc link and filename

Updated the Home.md to reference the correct 'quality_settings_wall_generator' section and renamed the corresponding documentation file for consistency.

---------

Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>

doc/Home.md

@@ -2,16 +2,25 @@
 
 Orca slicer is a powerful open source slicer for FFF (FDM) 3D Printers. This wiki page aims to provide an detailed explanation of the slicer settings, how to get the most out of them as well as how to calibrate and setup your printer.
 
+- [Prepare](#prepare)
 - [Print Settings, Tips and Tricks](#print-settings-tips-and-tricks)
   - [Quality Settings](#quality-settings)
   - [Speed Settings](#speed-settings)
-  - [Multi material](#multi-material)
+  - [Strength Settings](#strength-settings)
+- [Material Settings](#material-settings)
   - [Printer Settings](#printer-settings)
 - [Printer Calibration](#printer-calibration)
 - [Developer Section](#developer-section)
 
 > [!NOTE]
-> The Wiki is **Work In Progress** so bear with us while we get it up and running!
+> The Wiki is **Work In Progress** so bear with us while we get it up and running!  
+> Please consider contributing to the wiki following the [How to contribute to the wiki](How-to-wiki) guide.
+
+## Prepare
+
+First steps to prepare your model/s for printing.
+
+- [STL Transformation](stl-transformation)
 
 ## Print Settings, Tips and Tricks
 
@@ -22,17 +31,31 @@ The below sections provide a detailed settings explanation as well as tips and t
 - [Layer Height Settings](quality_settings_layer_height)
 - [Line Width Settings](quality_settings_line_width)
 - [Seam Settings](quality_settings_seam)
-- [Precise wall](Precise-wall)
-- [Precise Z height](precise-z-height)
-- [STL Transformation](stl-transformation)
+- [Precision](quality_settings_precision)
+  - [Precise Wall](quality_settings_precision#precise-wall)
+  - [Precise Z Height](quality_settings_precision#precise-z-height)
+  - [Slice gap closing radius](quality_settings_precision#slice-gap-closing-radius)
+  - [Resolution](quality_settings_precision#resolution)
+  - [Arc fitting](quality_settings_precision#arc-fitting)
+  - [X-Y Compensation](quality_settings_precision#x-y-compensation)
+  - [Elephant foot compensation](quality_settings_precision#elephant-foot-compensation)
+  - [Precise wall](quality_settings_precision#precise-wall)
+  - [Precise Z Height](quality_settings_precision#precise-z-height)
+  - [Polyholes](quality_settings_precision#polyholes)
+- [Wall generator](quality_settings_wall_generator)
 
 ### Speed Settings
 
-- [Extrusion rate smoothing](extrusion-rate-smoothing)
+- [Extrusion rate smoothing](speed_extrusion_rate_smoothing)
 
-### Multi material
+### Strength Settings
+
+- [Infill](strength_settings_infill)
+
+## Material Settings
 
 - [Single Extruder Multimaterial](semm)
+- [Pellet Printers (pellet flow coefficient)](pellet-flow-coefficient)
 
 ### Printer Settings
 
@@ -41,8 +64,6 @@ The below sections provide a detailed settings explanation as well as tips and t
 - [Chamber temperature control](chamber-temperature)
 - [Adaptive Bed Mesh](adaptive-bed-mesh)
 - [Using different bed types in Orca](bed-types)
-- [Pellet Printers (pellet flow coefficient)](pellet-flow-coefficient)
-- [Fill Patterns](fill-patterns)
 
 ## Printer Calibration
 
@@ -61,8 +82,12 @@ The [Calibration Guide](Calibration) outlines Orca’s key calibration tests and
 
 ## Developer Section
 
+This is a documentation from someone exploring the code and is by no means complete or even completely accurate. Please edit the parts you might find inaccurate. This is probably going to be helpful nonetheless.
+
 - [How to build Orca Slicer](How-to-build)
 - [Localization and translation guide](Localization_guide)
-- [Developer Reference](Developers-Home)
 - [How to create profiles](How-to-create-profiles)
 - [How to contribute to the wiki](How-to-wiki)
+- [Preset, PresetBundle and PresetCollection](Preset-and-bundle)
+- [Plater, Sidebar, Tab, ComboBox](plater-sidebar-tab-combobox)
+- [Slicing Call Hierarchy](slicing-hierarchy)