ENH:sync petg basic with master branch

Change-Id: If8f5ff4cece198dcc1c921f99424222fb86f98a2
(cherry picked from commit 27d158b41608d9fec07a58986cb7c5ee30467b3a)

resources/profiles/BBL.json

@@ -491,6 +491,10 @@
             "name": "0.10mm Standard @BBL A1 0.2 nozzle",
             "sub_path": "process/0.10mm Standard @BBL A1 0.2 nozzle.json"
         },
+        {
+            "name": "0.10mm Standard @BBL A1M 0.2 nozzle",
+            "sub_path": "process/0.10mm Standard @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "0.10mm Standard @BBL H2S 0.2 nozzle",
             "sub_path": "process/0.10mm Standard @BBL H2S 0.2 nozzle.json"
@@ -671,6 +675,10 @@
             "name": "0.20mm Standard @BBL A1",
             "sub_path": "process/0.20mm Standard @BBL A1.json"
         },
+        {
+            "name": "0.20mm Standard @BBL A1M",
+            "sub_path": "process/0.20mm Standard @BBL A1M.json"
+        },
         {
             "name": "0.20mm Standard @BBL H2S",
             "sub_path": "process/0.20mm Standard @BBL H2S.json"
@@ -691,6 +699,10 @@
             "name": "0.20mm Strength @BBL A1",
             "sub_path": "process/0.20mm Strength @BBL A1.json"
         },
+        {
+            "name": "0.20mm Strength @BBL A1M",
+            "sub_path": "process/0.20mm Strength @BBL A1M.json"
+        },
         {
             "name": "0.20mm Strength @BBL P1P",
             "sub_path": "process/0.20mm Strength @BBL P1P.json"
@@ -791,6 +803,10 @@
             "name": "0.30mm Standard @BBL A1 0.6 nozzle",
             "sub_path": "process/0.30mm Standard @BBL A1 0.6 nozzle.json"
         },
+        {
+            "name": "0.30mm Standard @BBL A1M 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @BBL A1M 0.6 nozzle.json"
+        },
         {
             "name": "0.30mm Standard @BBL H2S 0.6 nozzle",
             "sub_path": "process/0.30mm Standard @BBL H2S 0.6 nozzle.json"
@@ -871,6 +887,10 @@
             "name": "0.40mm Standard @BBL A1 0.8 nozzle",
             "sub_path": "process/0.40mm Standard @BBL A1 0.8 nozzle.json"
         },
+        {
+            "name": "0.40mm Standard @BBL A1M 0.8 nozzle",
+            "sub_path": "process/0.40mm Standard @BBL A1M 0.8 nozzle.json"
+        },
         {
             "name": "0.40mm Standard @BBL H2S 0.8 nozzle",
             "sub_path": "process/0.40mm Standard @BBL H2S 0.8 nozzle.json"
@@ -938,26 +958,6 @@
         {
             "name": "0.56mm Standard @BBL X1C 0.8 nozzle",
             "sub_path": "process/0.56mm Standard @BBL X1C 0.8 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @BBL A1M 0.2 nozzle",
-            "sub_path": "process/0.10mm Standard @BBL A1M 0.2 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @BBL A1M",
-            "sub_path": "process/0.20mm Standard @BBL A1M.json"
-        },
-        {
-            "name": "0.20mm Strength @BBL A1M",
-            "sub_path": "process/0.20mm Strength @BBL A1M.json"
-        },
-        {
-            "name": "0.30mm Standard @BBL A1M 0.6 nozzle",
-            "sub_path": "process/0.30mm Standard @BBL A1M 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @BBL A1M 0.8 nozzle",
-            "sub_path": "process/0.40mm Standard @BBL A1M 0.8 nozzle.json"
         }
     ],
     "filament_list": [
@@ -1629,10 +1629,22 @@
             "name": "Bambu ABS @BBL H2D 0.8 nozzle",
             "sub_path": "filament/Bambu ABS @BBL H2D 0.8 nozzle.json"
         },
+        {
+            "name": "Bambu ABS @BBL H2DP",
+            "sub_path": "filament/Bambu ABS @BBL H2DP.json"
+        },
+        {
+            "name": "Bambu ABS @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/Bambu ABS @BBL H2DP 0.2 nozzle.json"
+        },
         {
             "name": "Bambu ABS @BBL H2DP 0.6 nozzle",
             "sub_path": "filament/Bambu ABS @BBL H2DP 0.6 nozzle.json"
         },
+        {
+            "name": "Bambu ABS @BBL H2DP 0.8 nozzle",
+            "sub_path": "filament/Bambu ABS @BBL H2DP 0.8 nozzle.json"
+        },
         {
             "name": "Bambu ABS @BBL H2S",
             "sub_path": "filament/Bambu ABS @BBL H2S.json"
@@ -1685,6 +1697,18 @@
             "name": "Bambu ABS @BBL X1C 0.8 nozzle",
             "sub_path": "filament/Bambu ABS @BBL X1C 0.8 nozzle.json"
         },
+        {
+            "name": "Bambu ABS @BBL X1E",
+            "sub_path": "filament/Bambu ABS @BBL X1E.json"
+        },
+        {
+            "name": "Bambu ABS @BBL X1E 0.2 nozzle",
+            "sub_path": "filament/Bambu ABS @BBL X1E 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu ABS @BBL X1E 0.8 nozzle",
+            "sub_path": "filament/Bambu ABS @BBL X1E 0.8 nozzle.json"
+        },
         {
             "name": "Bambu ABS-GF @BBL A1",
             "sub_path": "filament/Bambu ABS-GF @BBL A1.json"
@@ -1801,6 +1825,14 @@
             "name": "PolyLite ABS @BBL H2D 0.2 nozzle",
             "sub_path": "filament/Polymaker/PolyLite ABS @BBL H2D 0.2 nozzle.json"
         },
+        {
+            "name": "PolyLite ABS @BBL H2DP",
+            "sub_path": "filament/PolyLite ABS @BBL H2DP.json"
+        },
+        {
+            "name": "PolyLite ABS @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/PolyLite ABS @BBL H2DP 0.2 nozzle.json"
+        },
         {
             "name": "PolyLite ABS @BBL P1P",
             "sub_path": "filament/Polymaker/PolyLite ABS @BBL P1P.json"
@@ -1809,6 +1841,14 @@
             "name": "PolyLite ABS @BBL X1C",
             "sub_path": "filament/Polymaker/PolyLite ABS @BBL X1C.json"
         },
+        {
+            "name": "PolyLite ABS @BBL X1E",
+            "sub_path": "filament/Polymaker/PolyLite ABS @BBL X1E.json"
+        },
+        {
+            "name": "PolyLite ABS @BBL X1E 0.2 nozzle",
+            "sub_path": "filament/Polymaker/PolyLite ABS @BBL X1E 0.2 nozzle.json"
+        },
         {
             "name": "Bambu ASA @BBL A1 0.2 nozzle",
             "sub_path": "filament/Bambu ASA @BBL A1 0.2 nozzle.json"
@@ -1837,6 +1877,18 @@
             "name": "Bambu ASA @BBL H2D 0.8 nozzle",
             "sub_path": "filament/Bambu ASA @BBL H2D 0.8 nozzle.json"
         },
+        {
+            "name": "Bambu ASA @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/Bambu ASA @BBL H2DP 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu ASA @BBL H2DP 0.4 nozzle",
+            "sub_path": "filament/Bambu ASA @BBL H2DP 0.4 nozzle.json"
+        },
+        {
+            "name": "Bambu ASA @BBL H2DP 0.6 nozzle",
+            "sub_path": "filament/Bambu ASA @BBL H2DP 0.6 nozzle.json"
+        },
         {
             "name": "Bambu ASA @BBL H2DP 0.8 nozzle",
             "sub_path": "filament/Bambu ASA @BBL H2DP 0.8 nozzle.json"
@@ -1893,6 +1945,18 @@
             "name": "Bambu ASA @BBL X1C 0.4 nozzle",
             "sub_path": "filament/Bambu ASA @BBL X1C 0.4 nozzle.json"
         },
+        {
+            "name": "Bambu ASA @BBL X1E",
+            "sub_path": "filament/Bambu ASA @BBL X1E.json"
+        },
+        {
+            "name": "Bambu ASA @BBL X1E 0.2 nozzle",
+            "sub_path": "filament/Bambu ASA @BBL X1E 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu ASA @BBL X1E 0.4 nozzle",
+            "sub_path": "filament/Bambu ASA @BBL X1E 0.4 nozzle.json"
+        },
         {
             "name": "Bambu ASA-Aero @BBL A1",
             "sub_path": "filament/Bambu ASA-Aero @BBL A1.json"
@@ -2037,6 +2101,14 @@
             "name": "PolyLite ASA @BBL H2D 0.2 nozzle",
             "sub_path": "filament/Polymaker/PolyLite ASA @BBL H2D 0.2 nozzle.json"
         },
+        {
+            "name": "PolyLite ASA @BBL H2DP",
+            "sub_path": "filament/PolyLite ASA @BBL H2DP.json"
+        },
+        {
+            "name": "PolyLite ASA @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/PolyLite ASA @BBL H2DP 0.2 nozzle.json"
+        },
         {
             "name": "PolyLite ASA @BBL P1P",
             "sub_path": "filament/Polymaker/PolyLite ASA @BBL P1P.json"
@@ -2045,6 +2117,10 @@
             "name": "PolyLite ASA @BBL X1C",
             "sub_path": "filament/Polymaker/PolyLite ASA @BBL X1C.json"
         },
+        {
+            "name": "PolyLite ASA @BBL X1E",
+            "sub_path": "filament/Polymaker/PolyLite ASA @BBL X1E.json"
+        },
         {
             "name": "Generic BVOH @BBL A1",
             "sub_path": "filament/Generic BVOH @BBL A1.json"
@@ -2165,6 +2241,10 @@
             "name": "Bambu PA-CF @BBL H2D",
             "sub_path": "filament/Bambu PA-CF @BBL H2D.json"
         },
+        {
+            "name": "Bambu PA-CF @BBL H2DP",
+            "sub_path": "filament/Bambu PA-CF @BBL H2DP.json"
+        },
         {
             "name": "Bambu PA-CF @BBL H2S",
             "sub_path": "filament/Bambu PA-CF @BBL H2S.json"
@@ -2181,6 +2261,10 @@
             "name": "Bambu PA-CF @BBL X1C",
             "sub_path": "filament/Bambu PA-CF @BBL X1C.json"
         },
+        {
+            "name": "Bambu PA-CF @BBL X1E",
+            "sub_path": "filament/Bambu PA-CF @BBL X1E.json"
+        },
         {
             "name": "Bambu PA6-CF @BBL A1",
             "sub_path": "filament/Bambu PA6-CF @BBL A1.json"
@@ -2301,6 +2385,10 @@
             "name": "Bambu Support G @BBL H2D",
             "sub_path": "filament/Bambu Support G @BBL H2D.json"
         },
+        {
+            "name": "Bambu Support G @BBL H2DP",
+            "sub_path": "filament/Bambu Support G @BBL H2DP.json"
+        },
         {
             "name": "Bambu Support G @BBL H2S",
             "sub_path": "filament/Bambu Support G @BBL H2S.json"
@@ -2317,6 +2405,10 @@
             "name": "Bambu Support G @BBL X1C",
             "sub_path": "filament/Bambu Support G @BBL X1C.json"
         },
+        {
+            "name": "Bambu Support G @BBL X1E",
+            "sub_path": "filament/Bambu Support G @BBL X1E.json"
+        },
         {
             "name": "Fiberon PA12-CF @BBL H2D",
             "sub_path": "filament/Polymaker/Fiberon PA12-CF @BBL H2D.json"
@@ -2413,6 +2505,22 @@
             "name": "Bambu PC @BBL H2D 0.8 nozzle",
             "sub_path": "filament/Bambu PC @BBL H2D 0.8 nozzle.json"
         },
+        {
+            "name": "Bambu PC @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/Bambu PC @BBL H2DP 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PC @BBL H2DP 0.4 nozzle",
+            "sub_path": "filament/Bambu PC @BBL H2DP 0.4 nozzle.json"
+        },
+        {
+            "name": "Bambu PC @BBL H2DP 0.6 nozzle",
+            "sub_path": "filament/Bambu PC @BBL H2DP 0.6 nozzle.json"
+        },
+        {
+            "name": "Bambu PC @BBL H2DP 0.8 nozzle",
+            "sub_path": "filament/Bambu PC @BBL H2DP 0.8 nozzle.json"
+        },
         {
             "name": "Bambu PC @BBL H2S",
             "sub_path": "filament/Bambu PC @BBL H2S.json"
@@ -2437,6 +2545,18 @@
             "name": "Bambu PC @BBL P1P 0.2 nozzle",
             "sub_path": "filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json"
         },
+        {
+            "name": "Bambu PC @BBL P2S 0.4 nozzle",
+            "sub_path": "filament/Bambu PC @BBL P2S 0.4 nozzle.json"
+        },
+        {
+            "name": "Bambu PC @BBL P2S 0.6 nozzle",
+            "sub_path": "filament/Bambu PC @BBL P2S 0.6 nozzle.json"
+        },
+        {
+            "name": "Bambu PC @BBL P2S 0.8 nozzle",
+            "sub_path": "filament/Bambu PC @BBL P2S 0.8 nozzle.json"
+        },
         {
             "name": "Bambu PC @BBL X1C",
             "sub_path": "filament/Bambu PC @BBL X1C.json"
@@ -2453,6 +2573,22 @@
             "name": "Bambu PC @BBL X1C 0.8 nozzle",
             "sub_path": "filament/Bambu PC @BBL X1C 0.8 nozzle.json"
         },
+        {
+            "name": "Bambu PC @BBL X1E",
+            "sub_path": "filament/Bambu PC @BBL X1E.json"
+        },
+        {
+            "name": "Bambu PC @BBL X1E 0.2 nozzle",
+            "sub_path": "filament/Bambu PC @BBL X1E 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PC @BBL X1E 0.6 nozzle",
+            "sub_path": "filament/Bambu PC @BBL X1E 0.6 nozzle.json"
+        },
+        {
+            "name": "Bambu PC @BBL X1E 0.8 nozzle",
+            "sub_path": "filament/Bambu PC @BBL X1E 0.8 nozzle.json"
+        },
         {
             "name": "Bambu PC FR @BBL A1",
             "sub_path": "filament/Bambu PC FR @BBL A1.json"
@@ -2701,6 +2837,10 @@
             "name": "Bambu PET-CF @BBL H2D",
             "sub_path": "filament/Bambu PET-CF @BBL H2D.json"
         },
+        {
+            "name": "Bambu PET-CF @BBL H2DP",
+            "sub_path": "filament/Bambu PET-CF @BBL H2DP.json"
+        },
         {
             "name": "Bambu PET-CF @BBL H2S",
             "sub_path": "filament/Bambu PET-CF @BBL H2S.json"
@@ -2717,6 +2857,10 @@
             "name": "Bambu PET-CF @BBL X1C",
             "sub_path": "filament/Bambu PET-CF @BBL X1C.json"
         },
+        {
+            "name": "Bambu PET-CF @BBL X1E",
+            "sub_path": "filament/Bambu PET-CF @BBL X1E.json"
+        },
         {
             "name": "Bambu PETG Basic @BBL A1",
             "sub_path": "filament/Bambu PETG Basic @BBL A1.json"
@@ -2729,6 +2873,18 @@
             "name": "Bambu PETG Basic @BBL A1 0.8 nozzle",
             "sub_path": "filament/Bambu PETG Basic @BBL A1 0.8 nozzle.json"
         },
+        {
+            "name": "Bambu PETG Basic @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PETG Basic @BBL A1M 0.4 nozzle",
+            "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json"
+        },
+        {
+            "name": "Bambu PETG Basic @BBL A1M 0.8 nozzle",
+            "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json"
+        },
         {
             "name": "Bambu PETG Basic @BBL H2D 0.2 nozzle",
             "sub_path": "filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json"
@@ -3177,6 +3333,10 @@
             "name": "Generic PETG-CF @BBL A1",
             "sub_path": "filament/Generic PETG-CF @BBL A1.json"
         },
+        {
+            "name": "Generic PETG-CF @BBL A1M",
+            "sub_path": "filament/P1P/Generic PETG-CF @BBL A1M.json"
+        },
         {
             "name": "Generic PETG-CF @BBL H2D",
             "sub_path": "filament/Generic PETG-CF @BBL H2D.json"
@@ -3225,6 +3385,10 @@
             "name": "PolyLite PETG @BBL H2DP",
             "sub_path": "filament/PolyLite PETG @BBL H2DP.json"
         },
+        {
+            "name": "PolyLite PETG @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/PolyLite PETG @BBL H2DP 0.2 nozzle.json"
+        },
         {
             "name": "PolyLite PETG @BBL H2S",
             "sub_path": "filament/PolyLite PETG @BBL H2S.json"
@@ -3253,6 +3417,18 @@
             "name": "SUNLU PETG @BBL A1 0.8 nozzle",
             "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json"
         },
+        {
+            "name": "SUNLU PETG @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json"
+        },
+        {
+            "name": "SUNLU PETG @BBL A1M 0.4 nozzle",
+            "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M.json"
+        },
+        {
+            "name": "SUNLU PETG @BBL A1M 0.8 nozzle",
+            "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json"
+        },
         {
             "name": "SUNLU PETG @BBL X1C",
             "sub_path": "filament/SUNLU/SUNLU PETG @BBL X1C.json"
@@ -3617,6 +3793,10 @@
             "name": "Bambu PLA Glow @BBL H2DP",
             "sub_path": "filament/Bambu PLA Glow @BBL H2DP.json"
         },
+        {
+            "name": "Bambu PLA Glow @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Glow @BBL H2DP 0.2 nozzle.json"
+        },
         {
             "name": "Bambu PLA Glow @BBL H2S",
             "sub_path": "filament/Bambu PLA Glow @BBL H2S.json"
@@ -3633,6 +3813,10 @@
             "name": "Bambu PLA Glow @BBL P2S",
             "sub_path": "filament/Bambu PLA Glow @BBL P2S.json"
         },
+        {
+            "name": "Bambu PLA Glow @BBL P2S 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Glow @BBL P2S 0.2 nozzle.json"
+        },
         {
             "name": "Bambu PLA Glow @BBL P2S 0.6 nozzle",
             "sub_path": "filament/Bambu PLA Glow @BBL P2S 0.6 nozzle.json"
@@ -4825,6 +5009,10 @@
             "name": "Generic PLA High Speed @BBL H2DP",
             "sub_path": "filament/Generic PLA High Speed @BBL H2DP.json"
         },
+        {
+            "name": "Generic PLA High Speed @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/Generic PLA High Speed @BBL H2DP 0.2 nozzle.json"
+        },
         {
             "name": "Generic PLA High Speed @BBL H2S",
             "sub_path": "filament/Generic PLA High Speed @BBL H2S.json"
@@ -4841,6 +5029,10 @@
             "name": "Generic PLA High Speed @BBL P2S",
             "sub_path": "filament/Generic PLA High Speed @BBL P2S.json"
         },
+        {
+            "name": "Generic PLA High Speed @BBL P2S 0.2 nozzle",
+            "sub_path": "filament/Generic PLA High Speed @BBL P2S 0.2 nozzle.json"
+        },
         {
             "name": "Generic PLA High Speed @BBL X1C",
             "sub_path": "filament/Generic PLA High Speed @BBL X1C.json"
@@ -4933,6 +5125,10 @@
             "name": "Overture Matte PLA @BBL H2DP",
             "sub_path": "filament/Overture Matte PLA @BBL H2DP.json"
         },
+        {
+            "name": "Overture Matte PLA @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/Overture Matte PLA @BBL H2DP 0.2 nozzle.json"
+        },
         {
             "name": "Overture Matte PLA @BBL H2S",
             "sub_path": "filament/Overture Matte PLA @BBL H2S.json"
@@ -4977,6 +5173,10 @@
             "name": "Overture PLA @BBL H2DP",
             "sub_path": "filament/Overture PLA @BBL H2DP.json"
         },
+        {
+            "name": "Overture PLA @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/Overture PLA @BBL H2DP 0.2 nozzle.json"
+        },
         {
             "name": "Overture PLA @BBL H2S",
             "sub_path": "filament/Overture PLA @BBL H2S.json"
@@ -5705,6 +5905,10 @@
             "name": "PolyLite PLA @BBL H2DP",
             "sub_path": "filament/PolyLite PLA @BBL H2DP.json"
         },
+        {
+            "name": "PolyLite PLA @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/PolyLite PLA @BBL H2DP 0.2 nozzle.json"
+        },
         {
             "name": "PolyLite PLA @BBL H2S",
             "sub_path": "filament/PolyLite PLA @BBL H2S.json"
@@ -5793,6 +5997,10 @@
             "name": "PolyTerra PLA @BBL H2DP",
             "sub_path": "filament/PolyTerra PLA @BBL H2DP.json"
         },
+        {
+            "name": "PolyTerra PLA @BBL H2DP 0.2 nozzle",
+            "sub_path": "filament/PolyTerra PLA @BBL H2DP 0.2 nozzle.json"
+        },
         {
             "name": "PolyTerra PLA @BBL H2S",
             "sub_path": "filament/PolyTerra PLA @BBL H2S.json"
@@ -6685,30 +6893,6 @@
             "name": "Generic TPU for AMS @BBL X1C",
             "sub_path": "filament/Generic TPU for AMS @BBL X1C.json"
         },
-        {
-            "name": "Bambu ABS @BBL H2DP",
-            "sub_path": "filament/Bambu ABS @BBL H2DP.json"
-        },
-        {
-            "name": "Bambu ABS @BBL X1E",
-            "sub_path": "filament/Bambu ABS @BBL X1E.json"
-        },
-        {
-            "name": "Bambu ABS @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/Bambu ABS @BBL H2DP 0.2 nozzle.json"
-        },
-        {
-            "name": "Bambu ABS @BBL X1E 0.2 nozzle",
-            "sub_path": "filament/Bambu ABS @BBL X1E 0.2 nozzle.json"
-        },
-        {
-            "name": "Bambu ABS @BBL H2DP 0.8 nozzle",
-            "sub_path": "filament/Bambu ABS @BBL H2DP 0.8 nozzle.json"
-        },
-        {
-            "name": "Bambu ABS @BBL X1E 0.8 nozzle",
-            "sub_path": "filament/Bambu ABS @BBL X1E 0.8 nozzle.json"
-        },
         {
             "name": "Generic ABS @BBL H2DP",
             "sub_path": "filament/Generic ABS @BBL H2DP.json"
@@ -6729,42 +6913,10 @@
             "name": "PolyLite ABS @BBL P1P 0.2 nozzle",
             "sub_path": "filament/Polymaker/PolyLite ABS @BBL P1P 0.2 nozzle.json"
         },
-        {
-            "name": "PolyLite ABS @BBL H2DP",
-            "sub_path": "filament/PolyLite ABS @BBL H2DP.json"
-        },
         {
             "name": "PolyLite ABS @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Polymaker/PolyLite ABS @BBL X1C 0.2 nozzle.json"
         },
-        {
-            "name": "PolyLite ABS @BBL X1E",
-            "sub_path": "filament/Polymaker/PolyLite ABS @BBL X1E.json"
-        },
-        {
-            "name": "Bambu ASA @BBL H2DP 0.6 nozzle",
-            "sub_path": "filament/Bambu ASA @BBL H2DP 0.6 nozzle.json"
-        },
-        {
-            "name": "Bambu ASA @BBL X1E",
-            "sub_path": "filament/Bambu ASA @BBL X1E.json"
-        },
-        {
-            "name": "Bambu ASA @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/Bambu ASA @BBL H2DP 0.2 nozzle.json"
-        },
-        {
-            "name": "Bambu ASA @BBL X1E 0.2 nozzle",
-            "sub_path": "filament/Bambu ASA @BBL X1E 0.2 nozzle.json"
-        },
-        {
-            "name": "Bambu ASA @BBL H2DP 0.4 nozzle",
-            "sub_path": "filament/Bambu ASA @BBL H2DP 0.4 nozzle.json"
-        },
-        {
-            "name": "Bambu ASA @BBL X1E 0.4 nozzle",
-            "sub_path": "filament/Bambu ASA @BBL X1E 0.4 nozzle.json"
-        },
         {
             "name": "Generic ASA @BBL H2DP",
             "sub_path": "filament/Generic ASA @BBL H2DP.json"
@@ -6785,33 +6937,13 @@
             "name": "PolyLite ASA @BBL P1P 0.2 nozzle",
             "sub_path": "filament/Polymaker/PolyLite ASA @BBL P1P 0.2 nozzle.json"
         },
-        {
-            "name": "PolyLite ASA @BBL H2DP",
-            "sub_path": "filament/PolyLite ASA @BBL H2DP.json"
-        },
         {
             "name": "PolyLite ASA @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Polymaker/PolyLite ASA @BBL X1C 0.2 nozzle.json"
         },
         {
-            "name": "PolyLite ASA @BBL X1E",
+            "name": "PolyLite ASA @BBL X1E 0.2 nozzle",
-            "sub_path": "filament/Polymaker/PolyLite ASA @BBL X1E.json"
+            "sub_path": "filament/Polymaker/PolyLite ASA @BBL X1E 0.2 nozzle.json"
-        },
-        {
-            "name": "Bambu PA-CF @BBL H2DP",
-            "sub_path": "filament/Bambu PA-CF @BBL H2DP.json"
-        },
-        {
-            "name": "Bambu PA-CF @BBL X1E",
-            "sub_path": "filament/Bambu PA-CF @BBL X1E.json"
-        },
-        {
-            "name": "Bambu Support G @BBL H2DP",
-            "sub_path": "filament/Bambu Support G @BBL H2DP.json"
-        },
-        {
-            "name": "Bambu Support G @BBL X1E",
-            "sub_path": "filament/Bambu Support G @BBL X1E.json"
         },
         {
             "name": "Generic PA @BBL A1",
@@ -6833,66 +6965,22 @@
             "name": "Generic PA-CF @BBL X1E",
             "sub_path": "filament/Generic PA-CF @BBL X1E.json"
         },
-        {
-            "name": "Bambu PC @BBL H2DP 0.4 nozzle",
-            "sub_path": "filament/Bambu PC @BBL H2DP 0.4 nozzle.json"
-        },
         {
             "name": "Bambu PC @BBL P1S",
             "sub_path": "filament/Bambu PC @BBL P1S.json"
         },
-        {
-            "name": "Bambu PC @BBL P2S 0.4 nozzle",
-            "sub_path": "filament/Bambu PC @BBL P2S 0.4 nozzle.json"
-        },
-        {
-            "name": "Bambu PC @BBL X1E",
-            "sub_path": "filament/Bambu PC @BBL X1E.json"
-        },
-        {
-            "name": "Bambu PC @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/Bambu PC @BBL H2DP 0.2 nozzle.json"
-        },
         {
             "name": "Bambu PC @BBL P1S 0.2 nozzle",
             "sub_path": "filament/Bambu PC @BBL P1S 0.2 nozzle.json"
         },
-        {
-            "name": "Bambu PC @BBL X1E 0.2 nozzle",
-            "sub_path": "filament/Bambu PC @BBL X1E 0.2 nozzle.json"
-        },
-        {
-            "name": "Bambu PC @BBL H2DP 0.6 nozzle",
-            "sub_path": "filament/Bambu PC @BBL H2DP 0.6 nozzle.json"
-        },
         {
             "name": "Bambu PC @BBL P1S 0.6 nozzle",
             "sub_path": "filament/Bambu PC @BBL P1S 0.6 nozzle.json"
         },
-        {
-            "name": "Bambu PC @BBL P2S 0.6 nozzle",
-            "sub_path": "filament/Bambu PC @BBL P2S 0.6 nozzle.json"
-        },
-        {
-            "name": "Bambu PC @BBL X1E 0.6 nozzle",
-            "sub_path": "filament/Bambu PC @BBL X1E 0.6 nozzle.json"
-        },
-        {
-            "name": "Bambu PC @BBL H2DP 0.8 nozzle",
-            "sub_path": "filament/Bambu PC @BBL H2DP 0.8 nozzle.json"
-        },
         {
             "name": "Bambu PC @BBL P1S 0.8 nozzle",
             "sub_path": "filament/Bambu PC @BBL P1S 0.8 nozzle.json"
         },
-        {
-            "name": "Bambu PC @BBL P2S 0.8 nozzle",
-            "sub_path": "filament/Bambu PC @BBL P2S 0.8 nozzle.json"
-        },
-        {
-            "name": "Bambu PC @BBL X1E 0.8 nozzle",
-            "sub_path": "filament/Bambu PC @BBL X1E 0.8 nozzle.json"
-        },
         {
             "name": "Generic PC @BBL H2DP",
             "sub_path": "filament/Generic PC @BBL H2DP.json"
@@ -6925,34 +7013,10 @@
             "name": "Generic PC @BBL X1E 0.2 nozzle",
             "sub_path": "filament/Generic PC @BBL X1E 0.2 nozzle.json"
         },
-        {
-            "name": "Bambu PET-CF @BBL H2DP",
-            "sub_path": "filament/Bambu PET-CF @BBL H2DP.json"
-        },
-        {
-            "name": "Bambu PET-CF @BBL X1E",
-            "sub_path": "filament/Bambu PET-CF @BBL X1E.json"
-        },
-        {
-            "name": "Bambu PETG Basic @BBL A1M 0.4 nozzle",
-            "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json"
-        },
-        {
-            "name": "Bambu PETG Basic @BBL A1M 0.2 nozzle",
-            "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json"
-        },
-        {
-            "name": "Bambu PETG Basic @BBL A1M 0.8 nozzle",
-            "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json"
-        },
         {
             "name": "Bambu PETG-CF @BBL A1M 0.4 nozzle",
             "sub_path": "filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json"
         },
-        {
-            "name": "Generic PETG-CF @BBL A1M",
-            "sub_path": "filament/P1P/Generic PETG-CF @BBL A1M.json"
-        },
         {
             "name": "PolyLite PETG @BBL A1M 0.2 nozzle",
             "sub_path": "filament/Polymaker/PolyLite PETG @BBL A1M 0.2 nozzle.json"
@@ -6961,26 +7025,10 @@
             "name": "PolyLite PETG @BBL P1P 0.2 nozzle",
             "sub_path": "filament/Polymaker/PolyLite PETG @BBL P1P 0.2 nozzle.json"
         },
-        {
-            "name": "PolyLite PETG @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/PolyLite PETG @BBL H2DP 0.2 nozzle.json"
-        },
         {
             "name": "PolyLite PETG @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Polymaker/PolyLite PETG @BBL X1C 0.2 nozzle.json"
         },
-        {
-            "name": "SUNLU PETG @BBL A1M 0.4 nozzle",
-            "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M.json"
-        },
-        {
-            "name": "SUNLU PETG @BBL A1M 0.2 nozzle",
-            "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json"
-        },
-        {
-            "name": "SUNLU PETG @BBL A1M 0.8 nozzle",
-            "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json"
-        },
         {
             "name": "Bambu PLA Glow @BBL P1P 0.2 nozzle",
             "sub_path": "filament/Bambu PLA Glow @BBL P1P 0.2 nozzle.json"
@@ -6989,18 +7037,10 @@
             "name": "Bambu PLA Glow @BBL X1 0.2 nozzle",
             "sub_path": "filament/Bambu PLA Glow @BBL X1 0.2 nozzle.json"
         },
-        {
-            "name": "Bambu PLA Glow @BBL P2S 0.2 nozzle",
-            "sub_path": "filament/Bambu PLA Glow @BBL P2S 0.2 nozzle.json"
-        },
         {
             "name": "Bambu PLA Glow @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Bambu PLA Glow @BBL X1C 0.2 nozzle.json"
         },
-        {
-            "name": "Bambu PLA Glow @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/Bambu PLA Glow @BBL H2DP 0.2 nozzle.json"
-        },
         {
             "name": "Bambu PLA Glow @BBL X1E 0.2 nozzle",
             "sub_path": "filament/Bambu PLA Glow @BBL X1E 0.2 nozzle.json"
@@ -7013,14 +7053,6 @@
             "name": "Generic PLA High Speed @BBL P1P 0.2 nozzle",
             "sub_path": "filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json"
         },
-        {
-            "name": "Generic PLA High Speed @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/Generic PLA High Speed @BBL H2DP 0.2 nozzle.json"
-        },
-        {
-            "name": "Generic PLA High Speed @BBL P2S 0.2 nozzle",
-            "sub_path": "filament/Generic PLA High Speed @BBL P2S 0.2 nozzle.json"
-        },
         {
             "name": "Generic PLA High Speed @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json"
@@ -7033,10 +7065,6 @@
             "name": "Overture Matte PLA @BBL P1P 0.2 nozzle",
             "sub_path": "filament/Overture/Overture Matte PLA @BBL P1P 0.2 nozzle.json"
         },
-        {
-            "name": "Overture Matte PLA @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/Overture Matte PLA @BBL H2DP 0.2 nozzle.json"
-        },
         {
             "name": "Overture Matte PLA @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Overture/Overture Matte PLA @BBL X1C 0.2 nozzle.json"
@@ -7049,18 +7077,10 @@
             "name": "Overture PLA @BBL P1P 0.2 nozzle",
             "sub_path": "filament/Overture/Overture PLA @BBL P1P 0.2 nozzle.json"
         },
-        {
-            "name": "Overture PLA @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/Overture PLA @BBL H2DP 0.2 nozzle.json"
-        },
         {
             "name": "Overture PLA @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Overture/Overture PLA @BBL X1C 0.2 nozzle.json"
         },
-        {
-            "name": "PolyLite PLA @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/PolyLite PLA @BBL H2DP 0.2 nozzle.json"
-        },
         {
             "name": "PolyLite PLA @BBL P1P 0.2 nozzle",
             "sub_path": "filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json"
@@ -7069,10 +7089,6 @@
             "name": "PolyLite PLA @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Polymaker/PolyLite PLA @BBL X1C 0.2 nozzle.json"
         },
-        {
-            "name": "PolyTerra PLA @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/PolyTerra PLA @BBL H2DP 0.2 nozzle.json"
-        },
         {
             "name": "PolyTerra PLA @BBL P1P 0.2 nozzle",
             "sub_path": "filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json"
@@ -7093,22 +7109,6 @@
             "name": "Generic TPU @BBL H2S",
             "sub_path": "filament/Generic TPU @BBL H2S.json"
         },
-        {
-            "name": "PolyLite ABS @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/PolyLite ABS @BBL H2DP 0.2 nozzle.json"
-        },
-        {
-            "name": "PolyLite ABS @BBL X1E 0.2 nozzle",
-            "sub_path": "filament/Polymaker/PolyLite ABS @BBL X1E 0.2 nozzle.json"
-        },
-        {
-            "name": "PolyLite ASA @BBL H2DP 0.2 nozzle",
-            "sub_path": "filament/PolyLite ASA @BBL H2DP 0.2 nozzle.json"
-        },
-        {
-            "name": "PolyLite ASA @BBL X1E 0.2 nozzle",
-            "sub_path": "filament/Polymaker/PolyLite ASA @BBL X1E 0.2 nozzle.json"
-        },
         {
             "name": "AliZ PA-CF @P1-X1",
             "sub_path": "filament/AliZ/AliZ PA-CF @P1-X1.json"

resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1 0.2 nozzle.json

@@ -5,6 +5,15 @@
     "from": "system",
     "setting_id": "GFSG00_07",
     "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "35"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
     "filament_flow_ratio": [
         "0.94"
     ],
@@ -17,8 +26,14 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
     "pre_start_fan_time": [
-        "2"
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "7"
     ],
     "compatible_printers": [
         "Bambu Lab A1 0.2 nozzle"

resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1 0.8 nozzle.json

@@ -6,10 +6,10 @@
     "setting_id": "GFSG00_08",
     "instantiation": "true",
     "fan_max_speed": [
-        "60"
+        "50"
     ],
     "fan_min_speed": [
-        "20"
+        "30"
     ],
     "filament_flow_ratio": [
         "0.94"
@@ -18,13 +18,34 @@
         "1"
     ],
     "filament_max_volumetric_speed": [
-        "12"
+        "13"
     ],
     "filament_retraction_distances_when_cut": [
         "18"
     ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1"
+    ],
+    "filament_z_hop": [
+        "0.2"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift"
+    ],
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
+    ],
     "pre_start_fan_time": [
-        "2"
+        "0"
     ],
     "compatible_printers": [
         "Bambu Lab A1 0.8 nozzle",

resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1.json

@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG00_06",
     "instantiation": "true",
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
     "filament_flow_ratio": [
         "0.94"
     ],
@@ -12,11 +18,29 @@
         "1"
     ],
     "filament_max_volumetric_speed": [
-        "9"
+        "13"
     ],
     "filament_retraction_distances_when_cut": [
         "18"
     ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift"
+    ],
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
+    ],
     "pre_start_fan_time": [
         "2"
     ],

resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json

@@ -5,14 +5,35 @@
     "from": "system",
     "setting_id": "GFSG00_04",
     "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "35"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
     "pre_start_fan_time": [
-        "2"
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "7"
     ],
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"

resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json

@@ -5,11 +5,41 @@
     "from": "system",
     "setting_id": "GFSG00_03",
     "instantiation": "true",
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
-        "9"
+        "13"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift"
+    ],
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
     ],
     "pre_start_fan_time": [
         "2"

resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json

@@ -6,19 +6,46 @@
     "setting_id": "GFSG00_05",
     "instantiation": "true",
     "fan_max_speed": [
-        "60"
+        "50"
     ],
     "fan_min_speed": [
-        "20"
+        "30"
     ],
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
-        "12"
+        "13"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1"
+    ],
+    "filament_z_hop": [
+        "0.2"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift"
+    ],
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "245"
     ],
     "pre_start_fan_time": [
-        "2"
+        "0"
     ],
     "compatible_printers": [
         "Bambu Lab A1 mini 0.6 nozzle",

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json

@@ -5,6 +5,9 @@
     "from": "system",
     "setting_id": "GFSG00_15",
     "instantiation": "true",
+    "fan_min_speed": [
+        "20"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -18,8 +21,8 @@
         "0"
     ],
     "filament_flush_volumetric_speed": [
-        "0",
+        "3",
-        "0"
+        "3"
     ],
     "filament_long_retractions_when_cut": [
         "nil",
@@ -98,15 +101,22 @@
         "1"
     ],
     "nozzle_temperature": [
-        "255",
+        "250",
-        "255"
+        "250"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
     ],
     "pre_start_fan_time": [
-        "2"
+        "0"
     ],
     "retraction_distances_when_ec": [
         "10",

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json

@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG00_09",
     "instantiation": "true",
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -26,8 +32,8 @@
         "nil"
     ],
     "filament_max_volumetric_speed": [
-        "13",
+        "18",
-        "13"
+        "21"
     ],
     "filament_ramming_volumetric_speed": [
         "-1",
@@ -50,8 +56,8 @@
         "nil"
     ],
     "filament_retraction_length": [
-        "nil",
+        "0.4",
-        "nil"
+        "0.4"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -62,20 +68,20 @@
         "nil"
     ],
     "filament_wipe": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_wipe_distance": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_z_hop": [
         "nil",
         "nil"
     ],
     "filament_z_hop_types": [
-        "nil",
+        "Spiral Lift",
-        "nil"
+        "Spiral Lift"
     ],
     "filament_extruder_variant": [
         "Direct Drive Standard",
@@ -98,12 +104,16 @@
         "1"
     ],
     "nozzle_temperature": [
-        "255",
+        "250",
-        "255"
+        "250"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
     ],
     "pre_start_fan_time": [
         "2"

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json

@@ -5,9 +5,6 @@
     "from": "system",
     "setting_id": "GFSG00_16",
     "instantiation": "true",
-    "fan_max_speed": [
-        "60"
-    ],
     "fan_min_speed": [
         "20"
     ],
@@ -32,8 +29,8 @@
         "nil"
     ],
     "filament_max_volumetric_speed": [
-        "16",
+        "21",
-        "16"
+        "28"
     ],
     "filament_ramming_volumetric_speed": [
         "-1",
@@ -56,8 +53,8 @@
         "nil"
     ],
     "filament_retraction_length": [
-        "nil",
+        "0.4",
-        "nil"
+        "0.4"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -68,20 +65,20 @@
         "nil"
     ],
     "filament_wipe": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_wipe_distance": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_z_hop": [
-        "nil",
+        "0.2",
-        "nil"
+        "0.2"
     ],
     "filament_z_hop_types": [
-        "nil",
+        "Spiral Lift",
-        "nil"
+        "Spiral Lift"
     ],
     "filament_extruder_variant": [
         "Direct Drive Standard",
@@ -104,13 +101,17 @@
         "1"
     ],
     "nozzle_temperature": [
-        "255",
+        "250",
         "255"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
         "255"
     ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
+    ],
     "pre_start_fan_time": [
         "2"
     ],

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.2 nozzle.json

@@ -5,6 +5,9 @@
     "from": "system",
     "setting_id": "GFSG00_20",
     "instantiation": "true",
+    "fan_min_speed": [
+        "20"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -18,8 +21,8 @@
         "0"
     ],
     "filament_flush_volumetric_speed": [
-        "0",
+        "3",
-        "0"
+        "3"
     ],
     "filament_long_retractions_when_cut": [
         "nil",
@@ -98,15 +101,22 @@
         "1"
     ],
     "nozzle_temperature": [
-        "255",
+        "250",
-        "255"
+        "250"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
     ],
     "pre_start_fan_time": [
-        "2"
+        "0"
     ],
     "retraction_distances_when_ec": [
         "10",

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.4 nozzle.json

@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG00_19",
     "instantiation": "true",
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -26,8 +32,8 @@
         "nil"
     ],
     "filament_max_volumetric_speed": [
-        "13",
+        "18",
-        "13"
+        "21"
     ],
     "filament_ramming_volumetric_speed": [
         "-1",
@@ -50,8 +56,8 @@
         "nil"
     ],
     "filament_retraction_length": [
-        "nil",
+        "0.4",
-        "nil"
+        "0.4"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -62,20 +68,20 @@
         "nil"
     ],
     "filament_wipe": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_wipe_distance": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_z_hop": [
         "nil",
         "nil"
     ],
     "filament_z_hop_types": [
-        "nil",
+        "Spiral Lift",
-        "nil"
+        "Spiral Lift"
     ],
     "filament_extruder_variant": [
         "Direct Drive Standard",
@@ -98,12 +104,16 @@
         "1"
     ],
     "nozzle_temperature": [
-        "255",
+        "250",
-        "255"
+        "250"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
     ],
     "pre_start_fan_time": [
         "2"

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.6 nozzle.json

@@ -5,9 +5,6 @@
     "from": "system",
     "setting_id": "GFSG00_21",
     "instantiation": "true",
-    "fan_max_speed": [
-        "60"
-    ],
     "fan_min_speed": [
         "20"
     ],
@@ -32,8 +29,8 @@
         "nil"
     ],
     "filament_max_volumetric_speed": [
-        "16",
+        "21",
-        "16"
+        "28"
     ],
     "filament_ramming_volumetric_speed": [
         "-1",
@@ -56,8 +53,8 @@
         "nil"
     ],
     "filament_retraction_length": [
-        "nil",
+        "0.4",
-        "nil"
+        "0.4"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -68,20 +65,20 @@
         "nil"
     ],
     "filament_wipe": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_wipe_distance": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_z_hop": [
-        "nil",
+        "0.2",
-        "nil"
+        "0.2"
     ],
     "filament_z_hop_types": [
-        "nil",
+        "Spiral Lift",
-        "nil"
+        "Spiral Lift"
     ],
     "filament_extruder_variant": [
         "Direct Drive Standard",
@@ -104,13 +101,17 @@
         "1"
     ],
     "nozzle_temperature": [
-        "255",
+        "250",
         "255"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
         "255"
     ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
+    ],
     "pre_start_fan_time": [
         "2"
     ],

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.2 nozzle.json

@@ -5,6 +5,9 @@
     "from": "system",
     "setting_id": "GFSG00_11",
     "instantiation": "true",
+    "fan_min_speed": [
+        "20"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -22,8 +25,8 @@
         "3"
     ],
     "filament_long_retractions_when_cut": [
-        "0",
+        "nil",
-        "0"
+        "nil"
     ],
     "filament_max_volumetric_speed": [
         "1",
@@ -46,8 +49,8 @@
         "nil"
     ],
     "filament_retraction_distances_when_cut": [
-        "10",
+        "nil",
-        "10"
+        "nil"
     ],
     "filament_retraction_length": [
         "nil",
@@ -94,21 +97,31 @@
         "0"
     ],
     "long_retractions_when_ec": [
-        "0",
+        "1",
-        "0"
+        "1"
     ],
     "nozzle_temperature": [
-        "255",
+        "250",
-        "255"
+        "250"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
     ],
-    "retraction_distances_when_ec": [
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
         "0",
         "0"
     ],
+    "pre_start_fan_time": [
+        "0"
+    ],
+    "retraction_distances_when_ec": [
+        "10",
+        "10"
+    ],
     "volumetric_speed_coefficients": [
         "0 0 0 0 0 0",
         "0 0 0 0 0 0"

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S.json

@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG00_10",
     "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -26,8 +32,8 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "13",
+        "18",
-        "13"
+        "21"
     ],
     "filament_ramming_volumetric_speed": [
         "-1",
@@ -50,8 +56,8 @@
         "10"
     ],
     "filament_retraction_length": [
-        "nil",
+        "0.4",
-        "nil"
+        "0.4"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -62,20 +68,20 @@
         "nil"
     ],
     "filament_wipe": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_wipe_distance": [
-        "nil",
+        "2",
-        "nil"
+        "2"
     ],
     "filament_z_hop": [
         "nil",
         "nil"
     ],
     "filament_z_hop_types": [
-        "nil",
+        "Spiral Lift",
-        "nil"
+        "Spiral Lift"
     ],
     "filament_extruder_variant": [
         "Direct Drive Standard",
@@ -98,12 +104,16 @@
         "0"
     ],
     "nozzle_temperature": [
-        "255",
+        "245",
-        "255"
+        "245"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
     ],
     "retraction_distances_when_ec": [
         "0",

resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.2 nozzle.json

@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG00_17",
     "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -33,10 +39,6 @@
         "-1",
         "-1"
     ],
-    "filament_ramming_volumetric_speed_nc": [
-        "-1",
-        "-1"
-    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -92,42 +94,10 @@
         "0",
         "0"
     ],
-    "filament_pre_cooling_temperature_nc": [
-        "0",
-        "0"
-    ],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-    "filament_ramming_travel_time_nc": [
-        "0",
-        "0"
-    ],
-    "filament_enable_overhang_speed": [
-        "1",
-        "1"
-    ],
-    "filament_overhang_1_4_speed": [
-        "0",
-        "0"
-    ],
-    "filament_overhang_2_4_speed": [
-        "50",
-        "50"
-    ],
-    "filament_overhang_3_4_speed": [
-        "30",
-        "30"
-    ],
-    "filament_overhang_4_4_speed": [
-        "10",
-        "10"
-    ],
-    "filament_overhang_totally_speed": [
-        "10",
-        "10"
-    ],
     "filament_adaptive_volumetric_speed": [
         "0",
         "0"
@@ -137,12 +107,15 @@
         "0"
     ],
     "nozzle_temperature": [
-        "255",
+        "250",
-        "255"
+        "250"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
     ],
     "override_process_overhang_speed": [
         "0",

resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.4 nozzle.json

@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG00_14",
     "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -26,17 +32,13 @@
         "nil"
     ],
     "filament_max_volumetric_speed": [
-        "13",
+        "15",
-        "13"
+        "15"
     ],
     "filament_ramming_volumetric_speed": [
         "-1",
         "-1"
     ],
-    "filament_ramming_volumetric_speed_nc": [
-        "-1",
-        "-1"
-    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -54,8 +56,8 @@
         "10"
     ],
     "filament_retraction_length": [
-        "nil",
+        "0.4",
-        "nil"
+        "0.4"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -66,20 +68,20 @@
         "nil"
     ],
     "filament_wipe": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_wipe_distance": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_z_hop": [
         "nil",
         "nil"
     ],
     "filament_z_hop_types": [
-        "nil",
+        "Spiral Lift",
-        "nil"
+        "Spiral Lift"
     ],
     "filament_extruder_variant": [
         "Direct Drive Standard",
@@ -92,42 +94,10 @@
         "0",
         "0"
     ],
-    "filament_pre_cooling_temperature_nc": [
-        "0",
-        "0"
-    ],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-    "filament_ramming_travel_time_nc": [
-        "0",
-        "0"
-    ],
-    "filament_enable_overhang_speed": [
-        "1",
-        "1"
-    ],
-    "filament_overhang_1_4_speed": [
-        "0",
-        "0"
-    ],
-    "filament_overhang_2_4_speed": [
-        "50",
-        "50"
-    ],
-    "filament_overhang_3_4_speed": [
-        "30",
-        "30"
-    ],
-    "filament_overhang_4_4_speed": [
-        "10",
-        "10"
-    ],
-    "filament_overhang_totally_speed": [
-        "10",
-        "10"
-    ],
     "filament_adaptive_volumetric_speed": [
         "0",
         "0"
@@ -137,12 +107,12 @@
         "0"
     ],
     "nozzle_temperature": [
-        "255",
+        "250",
-        "255"
+        "250"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
     ],
     "override_process_overhang_speed": [
         "0",

resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.6 nozzle.json

@@ -9,7 +9,7 @@
         "60"
     ],
     "fan_min_speed": [
-        "20"
+        "30"
     ],
     "filament_deretraction_speed": [
         "nil",
@@ -32,17 +32,13 @@
         "nil"
     ],
     "filament_max_volumetric_speed": [
-        "16",
+        "21",
-        "16"
+        "23"
     ],
     "filament_ramming_volumetric_speed": [
         "-1",
         "-1"
     ],
-    "filament_ramming_volumetric_speed_nc": [
-        "-1",
-        "-1"
-    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -60,8 +56,8 @@
         "10"
     ],
     "filament_retraction_length": [
-        "nil",
+        "0.4",
-        "nil"
+        "0.4"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -72,20 +68,20 @@
         "nil"
     ],
     "filament_wipe": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_wipe_distance": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_z_hop": [
-        "nil",
+        "0.2",
-        "nil"
+        "0.2"
     ],
     "filament_z_hop_types": [
-        "nil",
+        "Spiral Lift",
-        "nil"
+        "Spiral Lift"
     ],
     "filament_extruder_variant": [
         "Direct Drive Standard",
@@ -98,42 +94,10 @@
         "0",
         "0"
     ],
-    "filament_pre_cooling_temperature_nc": [
-        "0",
-        "0"
-    ],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-    "filament_ramming_travel_time_nc": [
-        "0",
-        "0"
-    ],
-    "filament_enable_overhang_speed": [
-        "1",
-        "1"
-    ],
-    "filament_overhang_1_4_speed": [
-        "0",
-        "0"
-    ],
-    "filament_overhang_2_4_speed": [
-        "50",
-        "50"
-    ],
-    "filament_overhang_3_4_speed": [
-        "30",
-        "30"
-    ],
-    "filament_overhang_4_4_speed": [
-        "10",
-        "10"
-    ],
-    "filament_overhang_totally_speed": [
-        "10",
-        "10"
-    ],
     "filament_adaptive_volumetric_speed": [
         "0",
         "0"
@@ -143,12 +107,12 @@
         "0"
     ],
     "nozzle_temperature": [
-        "255",
+        "250",
-        "255"
+        "250"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
     ],
     "override_process_overhang_speed": [
         "0",

resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json

@@ -5,26 +5,20 @@
     "from": "system",
     "setting_id": "GFSG00_00",
     "instantiation": "true",
-    "filament_max_volumetric_speed": [
+    "fan_max_speed": [
-        "1",
+        "50"
-        "1"
     ],
-    "filament_long_retractions_when_cut": [
+    "fan_min_speed": [
-        "1",
+        "20"
-        "1"
-    ],
-    "filament_retraction_distances_when_cut": [
-        "18",
-        "18"
-    ],
-    "filament_flow_ratio": [
-        "0.95",
-        "0.95"
     ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
+    "filament_flow_ratio": [
+        "0.95",
+        "0.95"
+    ],
     "filament_flush_temp": [
         "0",
         "0"
@@ -33,6 +27,14 @@
         "0",
         "0"
     ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "1",
+        "1"
+    ],
     "filament_ramming_volumetric_speed": [
         "-1",
         "-1"
@@ -49,6 +51,10 @@
         "nil",
         "nil"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
     "filament_retraction_length": [
         "nil",
         "nil"
@@ -102,8 +108,15 @@
         "255"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
     ],
     "retraction_distances_when_ec": [
         "0",

resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json

@@ -11,26 +11,14 @@
     "fan_min_speed": [
         "20"
     ],
-    "filament_long_retractions_when_cut": [
+    "filament_deretraction_speed": [
-        "1",
+        "nil",
-        "1"
+        "nil"
-    ],
-    "filament_retraction_distances_when_cut": [
-        "18",
-        "18"
-    ],
-    "filament_max_volumetric_speed": [
-        "16",
-        "16"
     ],
     "filament_flow_ratio": [
         "0.95",
         "0.95"
     ],
-    "filament_deretraction_speed": [
-        "nil",
-        "nil"
-    ],
     "filament_flush_temp": [
         "0",
         "0"
@@ -39,6 +27,14 @@
         "0",
         "0"
     ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "16"
+    ],
     "filament_ramming_volumetric_speed": [
         "-1",
         "-1"
@@ -55,9 +51,13 @@
         "nil",
         "nil"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
     "filament_retraction_length": [
-        "nil",
+        "0.4",
-        "nil"
+        "0.4"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -68,20 +68,20 @@
         "nil"
     ],
     "filament_wipe": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_wipe_distance": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_z_hop": [
-        "nil",
+        "0.2",
-        "nil"
+        "0.2"
     ],
     "filament_z_hop_types": [
-        "nil",
+        "Spiral Lift",
-        "nil"
+        "Spiral Lift"
     ],
     "filament_extruder_variant": [
         "Direct Drive Standard",
@@ -108,8 +108,12 @@
         "255"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
     ],
     "retraction_distances_when_ec": [
         "0",

resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json

@@ -5,26 +5,17 @@
     "from": "system",
     "setting_id": "GFSG00_01",
     "instantiation": "true",
-    "filament_long_retractions_when_cut": [
+    "fan_min_speed": [
-        "1",
+        "20"
-        "1"
-    ],
-    "filament_max_volumetric_speed": [
-        "13",
-        "13"
-    ],
-    "filament_retraction_distances_when_cut": [
-        "18",
-        "18"
-    ],
-    "filament_flow_ratio": [
-        "0.95",
-        "0.95"
     ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
+    "filament_flow_ratio": [
+        "0.95",
+        "0.95"
+    ],
     "filament_flush_temp": [
         "0",
         "0"
@@ -33,6 +24,14 @@
         "0",
         "0"
     ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "15",
+        "15"
+    ],
     "filament_ramming_volumetric_speed": [
         "-1",
         "-1"
@@ -49,9 +48,13 @@
         "nil",
         "nil"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
     "filament_retraction_length": [
-        "nil",
+        "0.4",
-        "nil"
+        "0.4"
     ],
     "filament_retraction_minimum_travel": [
         "nil",
@@ -62,20 +65,20 @@
         "nil"
     ],
     "filament_wipe": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_wipe_distance": [
-        "nil",
+        "1",
-        "nil"
+        "1"
     ],
     "filament_z_hop": [
         "nil",
         "nil"
     ],
     "filament_z_hop_types": [
-        "nil",
+        "Spiral Lift",
-        "nil"
+        "Spiral Lift"
     ],
     "filament_extruder_variant": [
         "Direct Drive Standard",
@@ -102,8 +105,12 @@
         "255"
     ],
     "nozzle_temperature_initial_layer": [
-        "255",
+        "245",
-        "255"
+        "245"
+    ],
+    "override_process_overhang_speed": [
+        "0",
+        "0"
     ],
     "retraction_distances_when_ec": [
         "0",

resources/profiles/BBL/filament/Bambu PETG Basic @base.json

@@ -42,6 +42,18 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_prime_volume_nc": [
+        "60"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "filament_change_length": [
+        "10"
+    ],
+    "filament_change_length_nc": [
+        "10"
+    ],
     "hot_plate_temp": [
         "70"
     ],
@@ -51,21 +63,27 @@
     "impact_strength_z": [
         "13.6"
     ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
     "nozzle_temperature_range_low": [
         "230"
     ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
     "overhang_fan_speed": [
         "90"
     ],
     "overhang_fan_threshold": [
         "10%"
     ],
+    "override_process_overhang_speed": [
+        "0"
+    ],
     "slow_down_layer_time": [
         "12"
     ],
+    "temperature_vitrification": [
+        "60"
+    ],
     "textured_plate_temp": [
         "70"
     ],