harktech: normalize Creality K2 filament profiles per repo convention

CI flagged ~150 K2 profile files for using space indentation; repo convention
is tab indentation. Ran the upstream-provided fixer:

    python3 scripts/orca_filament_lib.py -v Creality -p filament -f --force

Mechanical normalization:
- Spaces → tabs (1 tab per indent level)
- Field ordering normalized (name + type first)
- Single-value scalar fields converted to single-element arrays where the
  schema expects arrays (filament_cost, filament_density,
  temperature_vitrification, filament_max_volumetric_speed)

No semantic content changes. Pre-existing issue from the original K2
profile import; touching these files in the multicolor_method strip
brought them into the validator's PR-diff scope.

resources/profiles/Creality/filament/CR-ABS @Creality K2 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "07001",
-    "setting_id": "GFSA04",
 	"name": "CR-ABS @Creality K2 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "07001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "0",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "15",
+	"filament_cost": [
-    "filament_density": "1.08",
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+	"temperature_vitrification": [
+		"110"
+	],
 	"textured_plate_temp": "100",
 	"textured_plate_temp_initial_layer": "100"
 }

resources/profiles/Creality/filament/CR-ABS @Creality K2 0.6 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "07001",
-    "setting_id": "GFSA04",
 	"name": "CR-ABS @Creality K2 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "07001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "0",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "15",
+	"filament_cost": [
-    "filament_density": "1.08",
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -100,7 +106,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+	"temperature_vitrification": [
+		"110"
+	],
 	"textured_plate_temp": "100",
 	"textured_plate_temp_initial_layer": "100"
 }

resources/profiles/Creality/filament/CR-ABS @Creality K2 0.8 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "07001",
-    "setting_id": "GFSA04",
 	"name": "CR-ABS @Creality K2 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "07001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "0",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "15",
+	"filament_cost": [
-    "filament_density": "1.08",
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -100,7 +106,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+	"temperature_vitrification": [
+		"110"
+	],
 	"textured_plate_temp": "100",
 	"textured_plate_temp_initial_layer": "100"
 }

resources/profiles/Creality/filament/CR-ABS @Creality K2 Plus 0.2 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "07001",
-    "setting_id": "GFSA04",
 	"name": "CR-ABS @Creality K2 Plus 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "07001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "0",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "15",
+	"filament_cost": [
-    "filament_density": "1.08",
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "1",
+	"filament_max_volumetric_speed": [
+		"1"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+	"temperature_vitrification": [
+		"110"
+	],
 	"textured_plate_temp": "100",
 	"textured_plate_temp_initial_layer": "100"
 }

resources/profiles/Creality/filament/CR-ABS @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "07001",
-    "setting_id": "GFSA04",
 	"name": "CR-ABS @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "07001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_layer": "2",
 	"activate_chamber_temp_control": "1",
@@ -35,8 +35,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "15",
+	"filament_cost": [
-    "filament_density": "1.08",
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -47,7 +51,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -99,7 +105,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+	"temperature_vitrification": [
+		"110"
+	],
 	"textured_plate_temp": "100",
 	"textured_plate_temp_initial_layer": "100"
 }

resources/profiles/Creality/filament/CR-ABS @Creality K2 Plus 0.6 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "07001",
-    "setting_id": "GFSA04",
 	"name": "CR-ABS @Creality K2 Plus 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "07001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "0",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "15",
+	"filament_cost": [
-    "filament_density": "1.08",
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+	"temperature_vitrification": [
+		"110"
+	],
 	"textured_plate_temp": "100",
 	"textured_plate_temp_initial_layer": "100"
 }

resources/profiles/Creality/filament/CR-ABS @Creality K2 Plus 0.8 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "07001",
-    "setting_id": "GFSA04",
 	"name": "CR-ABS @Creality K2 Plus 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "07001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "0",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "15",
+	"filament_cost": [
-    "filament_density": "1.08",
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+	"temperature_vitrification": [
+		"110"
+	],
 	"textured_plate_temp": "100",
 	"textured_plate_temp_initial_layer": "100"
 }

resources/profiles/Creality/filament/CR-ABS @Creality K2 Pro 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "07001",
-    "setting_id": "GFSA04",
 	"name": "CR-ABS @Creality K2 Pro 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "07001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "0",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "15",
+	"filament_cost": [
-    "filament_density": "1.08",
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -100,7 +106,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+	"temperature_vitrification": [
+		"110"
+	],
 	"textured_plate_temp": "100",
 	"textured_plate_temp_initial_layer": "100"
 }

resources/profiles/Creality/filament/CR-ABS @Creality K2 Pro 0.6 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "07001",
-    "setting_id": "GFSA04",
 	"name": "CR-ABS @Creality K2 Pro 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "07001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "0",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "15",
+	"filament_cost": [
-    "filament_density": "1.08",
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -100,7 +106,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+	"temperature_vitrification": [
+		"110"
+	],
 	"textured_plate_temp": "100",
 	"textured_plate_temp_initial_layer": "100"
 }

resources/profiles/Creality/filament/CR-ABS @Creality K2 Pro 0.8 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "07001",
-    "setting_id": "GFSA04",
 	"name": "CR-ABS @Creality K2 Pro 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "07001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "0",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "15",
+	"filament_cost": [
-    "filament_density": "1.08",
+		"15"
+	],
+	"filament_density": [
+		"1.08"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -100,7 +106,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+	"temperature_vitrification": [
+		"110"
+	],
 	"textured_plate_temp": "100",
 	"textured_plate_temp_initial_layer": "100"
 }

resources/profiles/Creality/filament/CR-Nylon @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "11001",
-    "setting_id": "GFSA04",
 	"name": "CR-Nylon @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "11001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "100",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "52",
+	"filament_cost": [
-    "filament_density": "1.12",
+		"52"
+	],
+	"filament_density": [
+		"1.12"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "12",
+	"filament_max_volumetric_speed": [
+		"12"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -99,7 +105,9 @@
 	"slow_down_layer_time": "16",
 	"slow_down_min_speed": "10",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA @Creality K2 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "04001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA @Creality K2 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "04001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "25",
+	"filament_cost": [
-    "filament_density": "1.25",
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -101,7 +107,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA @Creality K2 Plus 0.2 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "04001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA @Creality K2 Plus 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "04001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "18",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"18"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "1",
+	"filament_max_volumetric_speed": [
+		"1"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "04001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "04001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "25",
+	"filament_cost": [
-    "filament_density": "1.25",
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA @Creality K2 Plus 0.6 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "04001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA @Creality K2 Plus 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "04001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "18",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"18"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA @Creality K2 Plus 0.8 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "04001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA @Creality K2 Plus 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "04001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "18",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"18"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA @Creality K2 Pro 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "04001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA @Creality K2 Pro 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "04001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "25",
+	"filament_cost": [
-    "filament_density": "1.25",
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -101,7 +107,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Carbon @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "13001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Carbon @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "13001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "25",
+	"filament_cost": [
-    "filament_density": "1.25",
+		"25"
+	],
+	"filament_density": [
+		"1.25"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "8",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Fluo @Creality K2 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "15001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Fluo @Creality K2 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "15001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "18",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"18"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -101,7 +107,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Fluo @Creality K2 Plus 0.2 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "15001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Fluo @Creality K2 Plus 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "15001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "18",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"18"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "1",
+	"filament_max_volumetric_speed": [
+		"1"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Fluo @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "15001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Fluo @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "15001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "18",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"18"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Fluo @Creality K2 Plus 0.6 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "15001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Fluo @Creality K2 Plus 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "15001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "18",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"18"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Fluo @Creality K2 Plus 0.8 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "15001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Fluo @Creality K2 Plus 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "15001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "18",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"18"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Fluo @Creality K2 Pro 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "15001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Fluo @Creality K2 Pro 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "15001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "18",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"18"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -101,7 +107,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Matte @Creality K2 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "14001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Matte @Creality K2 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "14001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "19",
+	"filament_cost": [
-    "filament_density": "1.3",
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -101,7 +107,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Matte @Creality K2 Plus 0.2 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "14001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Matte @Creality K2 Plus 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "14001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "19",
+	"filament_cost": [
-    "filament_density": "1.3",
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "1",
+	"filament_max_volumetric_speed": [
+		"1"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Matte @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "14001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Matte @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "14001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "19",
+	"filament_cost": [
-    "filament_density": "1.3",
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Matte @Creality K2 Plus 0.6 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "14001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Matte @Creality K2 Plus 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "14001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "19",
+	"filament_cost": [
-    "filament_density": "1.3",
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Matte @Creality K2 Plus 0.8 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "14001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Matte @Creality K2 Plus 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "14001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "19",
+	"filament_cost": [
-    "filament_density": "1.3",
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-PLA Matte @Creality K2 Pro 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "14001",
-    "setting_id": "GFSA04",
 	"name": "CR-PLA Matte @Creality K2 Pro 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "14001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "19",
+	"filament_cost": [
-    "filament_density": "1.3",
+		"19"
+	],
+	"filament_density": [
+		"1.3"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -101,7 +107,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-Silk @Creality K2 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "05001",
-    "setting_id": "GFSA04",
 	"name": "CR-Silk @Creality K2 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "05001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "22",
+	"filament_cost": [
-    "filament_density": "1.25",
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "10",
+	"filament_max_volumetric_speed": [
+		"10"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -102,7 +108,9 @@
 	"slow_down_layer_time": "10",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-Silk @Creality K2 Plus 0.2 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "05001",
-    "setting_id": "GFSA04",
 	"name": "CR-Silk @Creality K2 Plus 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "05001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "22",
+	"filament_cost": [
-    "filament_density": "1.25",
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "1",
+	"filament_max_volumetric_speed": [
+		"1"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-Silk @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "05001",
-    "setting_id": "GFSA04",
 	"name": "CR-Silk @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "05001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "22",
+	"filament_cost": [
-    "filament_density": "1.25",
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "10",
+	"filament_max_volumetric_speed": [
+		"10"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "8",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-Silk @Creality K2 Plus 0.6 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "05001",
-    "setting_id": "GFSA04",
 	"name": "CR-Silk @Creality K2 Plus 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "05001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "22",
+	"filament_cost": [
-    "filament_density": "1.25",
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "12",
+	"filament_max_volumetric_speed": [
+		"12"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-Silk @Creality K2 Plus 0.8 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "05001",
-    "setting_id": "GFSA04",
 	"name": "CR-Silk @Creality K2 Plus 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "05001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "22",
+	"filament_cost": [
-    "filament_density": "1.25",
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "12",
+	"filament_max_volumetric_speed": [
+		"12"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-Silk @Creality K2 Pro 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "05001",
-    "setting_id": "GFSA04",
 	"name": "CR-Silk @Creality K2 Pro 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "05001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "22",
+	"filament_cost": [
-    "filament_density": "1.25",
+		"22"
+	],
+	"filament_density": [
+		"1.25"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "10",
+	"filament_max_volumetric_speed": [
+		"10"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -102,7 +108,9 @@
 	"slow_down_layer_time": "10",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/CR-TPU @Creality K2 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "16001",
-    "setting_id": "GFSA04",
 	"name": "CR-TPU @Creality K2 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "16001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "24",
+	"filament_cost": [
-    "filament_density": "1.12",
+		"24"
+	],
+	"filament_density": [
+		"1.12"
+	],
 	"filament_deretraction_speed": "30",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "2",
+	"filament_max_volumetric_speed": [
+		"2"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -100,7 +106,9 @@
 	"slow_down_layer_time": "8",
 	"slow_down_min_speed": "10",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "40",
 	"textured_plate_temp_initial_layer": "40"
 }

resources/profiles/Creality/filament/CR-TPU @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "16001",
-    "setting_id": "GFSA04",
 	"name": "CR-TPU @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "16001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "20",
+	"filament_cost": [
-    "filament_density": "1.12",
+		"20"
+	],
+	"filament_density": [
+		"1.12"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "2",
+	"filament_max_volumetric_speed": [
+		"2"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "8",
 	"slow_down_min_speed": "10",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "40",
 	"textured_plate_temp_initial_layer": "40"
 }

resources/profiles/Creality/filament/CR-TPU @Creality K2 Pro 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "16001",
-    "setting_id": "GFSA04",
 	"name": "CR-TPU @Creality K2 Pro 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "16001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "24",
+	"filament_cost": [
-    "filament_density": "1.12",
+		"24"
+	],
+	"filament_density": [
+		"1.12"
+	],
 	"filament_deretraction_speed": "30",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "2",
+	"filament_max_volumetric_speed": [
+		"2"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -100,7 +106,9 @@
 	"slow_down_layer_time": "8",
 	"slow_down_min_speed": "10",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "40",
 	"textured_plate_temp_initial_layer": "40"
 }

resources/profiles/Creality/filament/CR-Wood @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "17001",
-    "setting_id": "GFSA04",
 	"name": "CR-Wood @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "17001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "23",
+	"filament_cost": [
-    "filament_density": "1.22",
+		"23"
+	],
+	"filament_density": [
+		"1.22"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "8",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ABS @Ender-3V3-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic ABS",
 	"from": "system",
 	"setting_id": "GFSA04_CREALITY_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"9"
 	],

resources/profiles/Creality/filament/Creality Generic ABS @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ABS @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic ABS",
 	"from": "system",
 	"setting_id": "GFSA04_CREALITY_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"9"
 	],

resources/profiles/Creality/filament/Creality Generic ABS @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ABS @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic ABS",
 	"from": "system",
 	"setting_id": "GFSA04_CREALITY_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"14"
 	],

resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ABS @K2-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic ABS",
 	"from": "system",
 	"setting_id": "GFSA04_CREALITY_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Creality/filament/Creality Generic ABS.json

@@ -1,14 +1,14 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ABS",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "GFSA04",
 	"filament_id": "GFB99",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_flow_ratio": [
 		"0.926"
 	],

resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA @Ender-3V3-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic ASA",
 	"from": "system",
 	"setting_id": "GFSA04_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"9"
 	],

resources/profiles/Creality/filament/Creality Generic ASA @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic ASA",
 	"from": "system",
 	"setting_id": "GFSA04_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"9"
 	],

resources/profiles/Creality/filament/Creality Generic ASA @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic ASA",
 	"from": "system",
 	"setting_id": "GFSA04_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"12"
 	],

resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA @K2-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic ASA",
 	"from": "system",
 	"setting_id": "GFSA04_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Creality/filament/Creality Generic ASA-CF @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA-CF @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic ASA @Hi-all",
 	"from": "system",
 	"setting_id": "GFSA04_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"9"
 	],

resources/profiles/Creality/filament/Creality Generic ASA.json

@@ -1,14 +1,14 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "fdm_filament_asa",
 	"from": "system",
 	"setting_id": "GFSA04",
 	"filament_id": "GFB98",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_flow_ratio": [
 		"0.926"
 	],

resources/profiles/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PA-CF @Ender-3V3-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PA-CF",
 	"from": "system",
 	"setting_id": "GFSN99_01",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"compatible_printers": [
 		"Creality Ender-3 V3 0.4 nozzle",
 		"Creality Ender-3 V3 0.6 nozzle",

resources/profiles/Creality/filament/Creality Generic PA-CF @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PA-CF @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PA-CF",
 	"from": "system",
 	"setting_id": "GFSN99_01",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"compatible_printers": [
 		"Creality K1 (0.4 nozzle)",
 		"Creality K1 (0.6 nozzle)",

resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PA-CF @K2-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PA-CF",
 	"from": "system",
 	"setting_id": "GFSN99_01",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"nozzle_temperature_initial_layer": [
 		"280"
 	],

resources/profiles/Creality/filament/Creality Generic PA-CF.json

@@ -1,14 +1,14 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PA-CF",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "fdm_filament_pa",
 	"from": "system",
 	"setting_id": "GFSN99",
 	"filament_id": "GFN98",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_type": [
 		"PA-CF"
 	],

resources/profiles/Creality/filament/Creality Generic PC @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PC @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PC",
 	"from": "system",
 	"setting_id": "GFSC99_06",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"chamber_temperatures": [
 		"60"
 	],

resources/profiles/Creality/filament/Creality Generic PC.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PC",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "fdm_filament_pc",
 	"from": "system",
 	"filament_id": "GFC99",
 	"instantiation": "false",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"16"
 	],

resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG @Ender-3V3-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PETG",
 	"from": "system",
 	"setting_id": "GFSG99_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"9"
 	],

resources/profiles/Creality/filament/Creality Generic PETG @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PETG",
 	"from": "system",
 	"setting_id": "GFSG99_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"9"
 	],

resources/profiles/Creality/filament/Creality Generic PETG @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PETG",
 	"from": "system",
 	"setting_id": "GFSG99_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"9"
 	],

resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG @K2-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PETG",
 	"from": "system",
 	"setting_id": "GFSG99_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],

resources/profiles/Creality/filament/Creality Generic PETG-CF @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG-CF @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PETG @Hi-all",
 	"from": "system",
 	"setting_id": "GFSG99_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"9"
 	],

resources/profiles/Creality/filament/Creality Generic PETG.json

@@ -1,14 +1,14 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "GFSA04",
 	"filament_id": "GFG99",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"reduce_fan_stop_start_freq": [
 		"1"
 	],

resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA @Ender-3V3-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA",
 	"from": "system",
 	"setting_id": "GFSL99_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],

resources/profiles/Creality/filament/Creality Generic PLA @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA",
 	"from": "system",
 	"setting_id": "GFSL99_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],

resources/profiles/Creality/filament/Creality Generic PLA @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA",
 	"from": "system",
 	"setting_id": "GFSL99_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],

resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA @K2-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA",
 	"from": "system",
 	"setting_id": "GFSL99_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA High Speed @Ender-3V3-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @Ender-3V3-all",
 	"from": "system",
 	"setting_id": "GFSL95_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"23"
 	],

resources/profiles/Creality/filament/Creality Generic PLA High Speed @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA High Speed @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @Hi-all",
 	"from": "system",
 	"setting_id": "GFSL95_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Creality/filament/Creality Generic PLA High Speed @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA High Speed @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @K1-all",
 	"from": "system",
 	"setting_id": "GFSL95_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"23"
 	],

resources/profiles/Creality/filament/Creality Generic PLA High Speed @K2-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA High Speed @K2-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @K2-all",
 	"from": "system",
 	"setting_id": "GFSL95_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"23"
 	],

resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Matte @Ender-3V3-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @Ender-3V3-all",
 	"from": "system",
 	"setting_id": "GFSL05_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],

resources/profiles/Creality/filament/Creality Generic PLA Matte @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Matte @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @Hi-all",
 	"from": "system",
 	"setting_id": "GFSL05_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],

resources/profiles/Creality/filament/Creality Generic PLA Matte @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Matte @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @K1-all",
 	"from": "system",
 	"setting_id": "GFSL05_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],

resources/profiles/Creality/filament/Creality Generic PLA Matte @K2-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Matte @K2-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @K2-all",
 	"from": "system",
 	"setting_id": "GFSL05_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],

resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Silk @Ender-3V3-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @Ender-3V3-all",
 	"from": "system",
 	"setting_id": "GFSL96_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"7.5"
 	],

resources/profiles/Creality/filament/Creality Generic PLA Silk @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Silk @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @Hi-all",
 	"from": "system",
 	"setting_id": "GFSL96_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_flow_ratio": [
 		"0.97"
 	],

resources/profiles/Creality/filament/Creality Generic PLA Silk @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Silk @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @K1-all",
 	"from": "system",
 	"setting_id": "GFSL96_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"7.5"
 	],

resources/profiles/Creality/filament/Creality Generic PLA Silk @K2-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Silk @K2-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @K2-all",
 	"from": "system",
 	"setting_id": "GFSL96_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"10"
 	],

resources/profiles/Creality/filament/Creality Generic PLA Wood @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Wood @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA @Hi-all",
 	"from": "system",
 	"setting_id": "GFSL96_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_flow_ratio": [
 		"0.88"
 	],

resources/profiles/Creality/filament/Creality Generic PLA-CF @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA-CF @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA-CF",
 	"from": "system",
 	"setting_id": "GFSL96_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],

resources/profiles/Creality/filament/Creality Generic PLA-CF @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA-CF @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA-CF",
 	"from": "system",
 	"setting_id": "GFSL96_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"additional_cooling_fan_speed": [
 		"0"
 	],

resources/profiles/Creality/filament/Creality Generic PLA-CF @K2-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA-CF @K2-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic PLA-CF",
 	"from": "system",
 	"setting_id": "GFSL96_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],

resources/profiles/Creality/filament/Creality Generic PLA-CF.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA-CF",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"filament_id": "GFL98",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Creality/filament/Creality Generic PLA.json

@@ -1,14 +1,14 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "GFSA04",
 	"filament_id": "GFL99",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_flow_ratio": [
 		"0.98"
 	],

resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic TPU @Ender-3V3-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic TPU",
 	"from": "system",
 	"setting_id": "GFU99_CREALITY_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"hot_plate_temp": [
 		"30"
 	],

resources/profiles/Creality/filament/Creality Generic TPU @Hi-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic TPU @Hi-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic TPU",
 	"from": "system",
 	"setting_id": "GFU99_CREALITY_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"hot_plate_temp": [
 		"30"
 	],

resources/profiles/Creality/filament/Creality Generic TPU @K1-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic TPU @K1-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic TPU",
 	"from": "system",
 	"setting_id": "GFU99_CREALITY_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"hot_plate_temp": [
 		"30"
 	],

resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json

@@ -1,13 +1,13 @@
 {
 	"type": "filament",
 	"name": "Creality Generic TPU @K2-all",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "Creality Generic TPU",
 	"from": "system",
 	"setting_id": "GFU99_CREALITY_00",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"hot_plate_temp": [
 		"40"
 	],

resources/profiles/Creality/filament/Creality Generic TPU.json

@@ -1,14 +1,14 @@
 {
 	"type": "filament",
 	"name": "Creality Generic TPU",
-	"filament_vendor": [
-		"Creality"
-	],
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "GFSA04",
 	"filament_id": "GFU99",
 	"instantiation": "true",
+	"filament_vendor": [
+		"Creality"
+	],
 	"filament_max_volumetric_speed": [
 		"3.2"
 	],

resources/profiles/Creality/filament/EN-PLA+ @Creality K2 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "09001",
-    "setting_id": "GFSA04",
 	"name": "EN-PLA+ @Creality K2 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "09001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "23",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"23"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -101,7 +107,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/EN-PLA+ @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "09001",
-    "setting_id": "GFSA04",
 	"name": "EN-PLA+ @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "09001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "23",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"23"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -98,7 +104,9 @@
 	"slow_down_layer_time": "4",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/EN-PLA+ @Creality K2 Pro 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "09001",
-    "setting_id": "GFSA04",
 	"name": "EN-PLA+ @Creality K2 Pro 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "09001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "23",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"23"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -101,7 +107,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/ENDER FAST PLA @Creality K2 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "09002",
-    "setting_id": "GFSA04",
 	"name": "ENDER FAST PLA @Creality K2 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "09002",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "24",
+	"filament_cost": [
-    "filament_density": "1.21",
+		"24"
+	],
+	"filament_density": [
+		"1.21"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "23",
+	"filament_max_volumetric_speed": [
+		"23"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -102,7 +108,9 @@
 	"slow_down_layer_time": "8",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/ENDER FAST PLA @Creality K2 Plus 0.2 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "09002",
-    "setting_id": "GFSA04",
 	"name": "ENDER FAST PLA @Creality K2 Plus 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "09002",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "25",
+	"filament_cost": [
-    "filament_density": "1.21",
+		"25"
+	],
+	"filament_density": [
+		"1.21"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "2",
+	"filament_max_volumetric_speed": [
+		"2"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -99,7 +105,9 @@
 	"slow_down_layer_time": "6",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "53",
+	"temperature_vitrification": [
+		"53"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/ENDER FAST PLA @Creality K2 Plus 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "09002",
-    "setting_id": "GFSA04",
 	"name": "ENDER FAST PLA @Creality K2 Plus 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "09002",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "25",
+	"filament_cost": [
-    "filament_density": "1.21",
+		"25"
+	],
+	"filament_density": [
+		"1.21"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "23",
+	"filament_max_volumetric_speed": [
+		"23"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -99,7 +105,9 @@
 	"slow_down_layer_time": "6",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "53",
+	"temperature_vitrification": [
+		"53"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/ENDER FAST PLA @Creality K2 Plus 0.6 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "09002",
-    "setting_id": "GFSA04",
 	"name": "ENDER FAST PLA @Creality K2 Plus 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "09002",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "25",
+	"filament_cost": [
-    "filament_density": "1.21",
+		"25"
+	],
+	"filament_density": [
+		"1.21"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "23",
+	"filament_max_volumetric_speed": [
+		"23"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -99,7 +105,9 @@
 	"slow_down_layer_time": "6",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "53",
+	"temperature_vitrification": [
+		"53"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/ENDER FAST PLA @Creality K2 Plus 0.8 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "09002",
-    "setting_id": "GFSA04",
 	"name": "ENDER FAST PLA @Creality K2 Plus 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "09002",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -34,8 +34,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "25",
+	"filament_cost": [
-    "filament_density": "1.21",
+		"25"
+	],
+	"filament_density": [
+		"1.21"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -46,7 +50,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "23",
+	"filament_max_volumetric_speed": [
+		"23"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -99,7 +105,9 @@
 	"slow_down_layer_time": "6",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "53",
+	"temperature_vitrification": [
+		"53"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/ENDER FAST PLA @Creality K2 Pro 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "09002",
-    "setting_id": "GFSA04",
 	"name": "ENDER FAST PLA @Creality K2 Pro 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "09002",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "24",
+	"filament_cost": [
-    "filament_density": "1.21",
+		"24"
+	],
+	"filament_density": [
+		"1.21"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "23",
+	"filament_max_volumetric_speed": [
+		"23"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -102,7 +108,9 @@
 	"slow_down_layer_time": "8",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }

resources/profiles/Creality/filament/Ender-PLA @Creality K2 0.4 nozzle.json

@@ -1,11 +1,11 @@
 {
 	"type": "filament",
-    "filament_id": "08001",
-    "setting_id": "GFSA04",
 	"name": "Ender-PLA @Creality K2 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "08001",
+	"instantiation": "true",
 	"activate_air_filtration": "0",
 	"activate_chamber_temp_control": "1",
 	"additional_cooling_fan_speed": "80",
@@ -36,8 +36,12 @@
 	"filament_cooling_final_speed": "3.4",
 	"filament_cooling_initial_speed": "2.2",
 	"filament_cooling_moves": "4",
-    "filament_cost": "20",
+	"filament_cost": [
-    "filament_density": "1.24",
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
 	"filament_deretraction_speed": "nil",
 	"filament_diameter": "1.75",
 	"filament_end_gcode": [
@@ -48,7 +52,9 @@
 	"filament_load_time": "0",
 	"filament_loading_speed": "28",
 	"filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "18",
+	"filament_max_volumetric_speed": [
+		"18"
+	],
 	"filament_minimal_purge_on_wipe_tower": "15",
 	"filament_multitool_ramming": "0",
 	"filament_multitool_ramming_flow": "10",
@@ -101,7 +107,9 @@
 	"slow_down_layer_time": "12",
 	"slow_down_min_speed": "20",
 	"support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+	"temperature_vitrification": [
+		"60"
+	],
 	"textured_plate_temp": "50",
 	"textured_plate_temp_initial_layer": "50"
 }