Add support for Prusa XL Input Shaper (only one head will print) & add PC-CF, PA11-CF, & PVB filament types (#5511)

* Add Prusa XL & speed profile

* Wrong name

* Fix cover image sizing

* Change infill pattern & density to whats in PrusaSlicer

* Fix filament start G-Code & Add additional info in printer notes

* Add PETG profile

* Link PETG profile

* Add ABS & add bed temps

* Add Prusament PLA & attempt at removing ramming limits

* Allow user to change ramming time & volume

* Revert changing identifier

* Remove invalid ramming variables

* Add Prusament PETG

* Try this

* Revert "Try this"

This reverts commit c6228950fb.

* Revert ramming changes

* Add rPLA, PLA+, PC-CF, PA11-CF, and PVB

* Add PVB profile and other minor improvements

* Add image formats

* Add rPLA profile & remove rPLA & PLA+ from printConfig

* Add Prusament PC-CF & small bug fixes

* Add Prusament ASA, PA-CF, PC, & pa11cf common file

* Minor improvements to common and speed profiles

* Add 0.20mm Quality profile

* Add .3mm Draft process & link .2mm Quality

* Add 0.15mm Quality process

* Add 0.10mm Detail process

* Add 0.07mm UltraDetail profile

* Add 0.5mm nozzle size & related processes

* Set default print profile

* Fix incorrect bridge flow ratio

* Fix incorrect support z distance

* Correct skirt values if enabled

* Add 0.6 & 0.8 nozzles & respective profiles as well as some fixes

* Set default profile for 0.8

* Add 0.25, 0.3, & respective profiles

This also adds all the nozzle sizes to the filament profiles

* Adapt filename format

* Remove unneeded values

* Add Input Shaper

* Fix raft contact distance

* Add Input Shaper profiles to filaments

* List default profiles

* Add printer variant variable

* Change cover sizes & optimize svg

* Fix small filament bug

* Add comment for symmetry

* Add Prusa before XL & XLIS

* Fix failing check

* Fix failing check part 2

* Some small changes

* I've been overthinking this haven't I?

* Could it be this?

* Revert this change

* Try one last thing

* Change naming for XLIS & covers

* Try removing non-IS profiles

* Change IS models

* Remove remnants of non-IS profiles

* Change naming for better consistency

resources/profiles/Prusa/process/fdm_process_common.json

@@ -57,7 +57,8 @@
     "raft_layers": "0",
     "seam_position": "aligned",
     "skirt_distance": "2",
-    "skirt_height": "1",
+    "skirt_height": "3",
+    "min_skirt_length": "4",
     "skirt_loops": "0",
     "minimum_sparse_infill_area": "15",
     "spiral_mode": "0",