2.2.0 pre4 (#84)

* Fix crash

* Update: Flutter 1223

* fix: networktestdialog crash

* Update Flutter 1223

* bump profile version to 02.02.42.02

* bump min_firm_ver to 1.0.0

resources/profiles/Snapmaker.json

@@ -1,6 +1,6 @@
 {
   "name": "Snapmaker",
-  "version": "02.02.41.02",
+  "version": "02.02.42.02",
   "force_update": "0",
   "description": "Snapmaker configurations",
   "machine_model_list": [

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json

@@ -48,7 +48,7 @@
         "20",
         "12"
     ],
-    "machine_start_gcode": "\n;===== date: 20251222 =====================\n\nPRINT_START\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n\nG28 X Y\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 粗回零 =================\nT{initial_extruder}\nM109 T{initial_extruder} S140\nG28 Z\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\n\n;===== 检测钢板 =================\nT{initial_extruder}\nM106 P2 S255\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG4 P2000\nROUGHLY_CLEAN_NOZZLE\nM107 P2\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nG0 Z5 F10000\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 P2 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nG28 Z\n\n;===== 热床调平 =================\nBED_MESH_CALIBRATE PROBE_COUNT=11,11\n\nG90\nG1 Z1.5\nG0 X10 Y3 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X110 E15 F360\nG1 Z1.5\n\nG90\nM106 S0\n",
+    "machine_start_gcode": ";===== date: 20251222 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count}\nSET_PRINT_STATS_INFO CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\nG28 X Y\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nG28 Z\n\n;===== 热床调平 =================\nBED_MESH_CALIBRATE PROBE_COUNT=11,11\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X10 Y3 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X110 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
     "machine_tool_change_time": "5",
     "max_layer_height": [
         "0.32",
@@ -176,10 +176,10 @@
         "0.4"
     ],
     "z_hop_types": [
-        "Normal Lift",
-        "Normal Lift",
-        "Normal Lift",
-        "Normal Lift"
+        "Auto Lift",
+        "Auto Lift",
+        "Auto Lift",
+        "Auto Lift"
     ],
     "enable_filament_ramming": "0",
     "extruder_clearance_height_to_rod": "27.5",

resources/web/flutter_web/assets/assets/i10n/en.json

@@ -313,6 +313,9 @@
   "time_lapse_video_start_downloading": "Start downloading...",
   "time_lapse_video_export_video_failed": "Export video failed",
 
+  "Network may be unstable, device connection may be unreliable.": "Network may be unstable, device connection may be unreliable",
+  "network_unstable_partial_operation_failed": "Network unstable, partial operation may failed",
+
 
   "Check": "Check",
   "default_exception_title": "Exception",

resources/web/flutter_web/assets/assets/i10n/zh-CN.json

@@ -376,6 +376,9 @@
   "loading...": "加载中...",
   "Loading...": "加载中...",
   "Login...": "登录中...",
+  "Network may be unstable, device connection may be unreliable": "网络不稳定，设备连接可能不可靠",
+  "network_unstable_partial_operation_failed": "网络不稳定，部分操作可能失败",
+
 
   "Heated Bed Temp.": "热床温度",
   "Print Speed": "打印速度",

resources/web/flutter_web/flutter_bootstrap.js

@@ -11,6 +11,6 @@ _flutter.buildConfig = {"engineRevision":"b8800d88be4866db1b15f8b954ab2573bba996
 
 _flutter.loader.load({
   serviceWorkerSettings: {
-    serviceWorkerVersion: "551267088"
+    serviceWorkerVersion: "122636570"
   }
 });

resources/web/flutter_web/flutter_service_worker.js

@@ -3,11 +3,11 @@ const MANIFEST = 'flutter-app-manifest';
 const TEMP = 'flutter-temp-cache';
 const CACHE_NAME = 'flutter-app-cache';
 
-const RESOURCES = {"flutter_bootstrap.js": "15aa1a61e2fffe7f5fe19354f3375131",
-"version.json": "1d3d3b6efcc44899280498cbf3bb2e8a",
+const RESOURCES = {"flutter_bootstrap.js": "360fcb7ece74a6ddc0b90b99cfaf61e8",
+"version.json": "970f76bce879e0e8a3c71f92c31d53be",
 "index.html": "0ea1997f6c2c3b34b0f1fb58390e10c7",
 "/": "0ea1997f6c2c3b34b0f1fb58390e10c7",
-"main.dart.js": "345b9e96e297d5fd652acfa9f7e5fe6e",
+"main.dart.js": "a295ed043d6a84d80de1eb3143542830",
 "flutter.js": "f31737fb005cd3a3c6bd9355efd33061",
 "version.changelog": "1ba1bc2d44d055158f7719b3b2ffe3a7",
 "favicon.png": "be8d1ab28c20907c9869c345d0482962",
@@ -16,20 +16,20 @@ const RESOURCES = {"flutter_bootstrap.js": "15aa1a61e2fffe7f5fe19354f3375131",
 "icons/Icon-maskable-512.png": "4870fb6720f4fcad016cb582589d136d",
 "icons/Icon-512.png": "343022ac1c56796cb7ff635faf0646ef",
 "manifest.json": "901d86fb8842ec0d66225a542131d689",
-"assets/AssetManifest.json": "7ce73ec4dfdc30e547047d3ef562c880",
+"assets/AssetManifest.json": "72e2d76c872feeb5bb96bcc8facd729c",
 "assets/NOTICES": "d453b0291cf6ccfc5ced86766a1aa652",
 "assets/FontManifest.json": "0dc3d44d47c5e2636cdca4babafb2396",
-"assets/AssetManifest.bin.json": "2e5c373110fd3fc0e6f113a5a850ed9d",
+"assets/AssetManifest.bin.json": "e834d2b760d8a73a48c833be3c19ba6e",
 "assets/packages/lava_device_control/assets/files/filament.json": "54d21ade78e6cd6025306530023b094d",
 "assets/packages/cupertino_icons/assets/CupertinoIcons.ttf": "391ff5f9f24097f4f6e4406690a06243",
 "assets/packages/fluttertoast/assets/toastify.js": "56e2c9cedd97f10e7e5f1cebd85d53e3",
 "assets/packages/fluttertoast/assets/toastify.css": "a85675050054f179444bc5ad70ffc635",
 "assets/packages/wakelock_plus/assets/no_sleep.js": "7748a45cd593f33280669b29c2c8919a",
 "assets/shaders/ink_sparkle.frag": "ecc85a2e95f5e9f53123dcaf8cb9b6ce",
-"assets/AssetManifest.bin": "ca2256603a4abe62eddd37a2eac154c5",
+"assets/AssetManifest.bin": "e6421692063a637e740d83842b7b806d",
 "assets/fonts/MaterialIcons-Regular.otf": "aa361df3c4cfa80e7a16cc8899e3c663",
-"assets/assets/i10n/zh-CN.json": "4c3107a1754a5dfa5539f945d27cb1b0",
-"assets/assets/i10n/en.json": "cd7528d64290e2ed607eab79ad18ab34",
+"assets/assets/i10n/zh-CN.json": "11eb31598543608b7fb935f5673cbaef",
+"assets/assets/i10n/en.json": "552a55a8589175d6bd2422e3d4acc5ca",
 "assets/assets/images/deviceNoResponse.webp": "1ca23a7feedfdc34362ea5789ccf895b",
 "assets/assets/images/deviceAuthorized.webp": "8eb814193bed15cec22658018871aba8",
 "assets/assets/images/IpInputGuide.webp": "06c11ce1dadc2910676aec6d40a5eea5",
@@ -42,7 +42,6 @@ const RESOURCES = {"flutter_bootstrap.js": "15aa1a61e2fffe7f5fe19354f3375131",
 "assets/assets/images/printtaskDefault.png": "2d53add29c1647300def2ec024574307",
 "assets/assets/images/deviceRejected.webp": "cb02f340100006ad22965c215fc6726c",
 "assets/assets/images/ipInputGuideCN.webp": "6ff23fea6ac4212d222500ba1cbbddcf",
-"assets/assets/images/bindPrinter.png": "b35f610897d7c4e891f3b0dc56d193f7",
 "assets/assets/images/3dprinter.png": "4515f02e633d58a1119c2f55114da32b",
 "assets/assets/images/logo.png": "b1a7a2105873616de883cf2662a2bf9c",
 "assets/assets/images/controlDefault.png": "1122ed99c68469d307335e55350c2bff",

resources/web/flutter_web/version.json

@@ -1 +1 @@
-{"app_name":"orca","version":"2.1.2","build_number":"20251222224146","package_name":"orca"}
+{"app_name":"orca","version":"2.1.2","build_number":"20251223154027","package_name":"orca"}